! Started logfile: J0153+7115_S_2017_07_16_pus_uvs.log on Thu May 9 10:58:07 2019 obs J0153+7115_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0153+7115_S_2017_07_16_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.693056 visibilities/baseline/integration-bin. ! Found source: J0153+7115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 13972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0153+7115_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 751 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.846069Jy sigma=0.007657 ! Fit after self-cal, rms=0.835888Jy sigma=0.007570 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=3.427 mas, bpa=-17.79 degrees ! Estimated noise=1084.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122457 Jy ! Component: 100 - total flux cleaned = 0.161796 Jy ! Total flux subtracted in 100 components = 0.161796 Jy ! Clean residual min=-0.007558 max=0.019138 Jy/beam ! Clean residual mean=-0.000008 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.161796 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.161796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089362Jy sigma=0.000778 ! Fit after self-cal, rms=0.089215Jy sigma=0.000776 ! Inverting map ! Added new window around map position (-4, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211043 Jy ! Component: 100 - total flux cleaned = 0.0330107 Jy ! Total flux subtracted in 100 components = 0.0330107 Jy ! Clean residual min=-0.005494 max=0.007309 Jy/beam ! Clean residual mean=-0.000003 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.194806 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.194806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082863Jy sigma=0.000718 ! Fit after self-cal, rms=0.082644Jy sigma=0.000716 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00881634 Jy ! Component: 100 - total flux cleaned = 0.0143972 Jy ! Total flux subtracted in 100 components = 0.0143972 Jy ! Clean residual min=-0.004608 max=0.007384 Jy/beam ! Clean residual mean=-0.000001 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.209203 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.209203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081360Jy sigma=0.000705 ! Fit after self-cal, rms=0.081312Jy sigma=0.000705 ! Inverting map ! Added new window around map position (-16, 5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0068476 Jy ! Component: 100 - total flux cleaned = 0.011269 Jy ! Total flux subtracted in 100 components = 0.011269 Jy ! Clean residual min=-0.004268 max=0.004620 Jy/beam ! Clean residual mean=-0.000001 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.220472 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 49 components and 0.220472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080585Jy sigma=0.000698 ! Fit after self-cal, rms=0.080546Jy sigma=0.000697 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.708 mas, bmaj=3.936 mas, bpa=-20.67 degrees ! Estimated noise=753.622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595844 Jy ! Component: 100 - total flux cleaned = 0.0100986 Jy ! Component: 150 - total flux cleaned = 0.0132096 Jy ! Component: 200 - total flux cleaned = 0.0154952 Jy ! Total flux subtracted in 200 components = 0.0154952 Jy ! Clean residual min=-0.003309 max=0.003125 Jy/beam ! Clean residual mean=0.000001 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.235968 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 83 components and 0.235968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079958Jy sigma=0.000692 ! Fit after self-cal, rms=0.079923Jy sigma=0.000692 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.99 KP 1.02 ! LA 0.99 MK 1.00 NL 0.90 OV 1.01 ! PT 1.05 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00 KP 0.97 ! LA 0.97 MK 1.01 NL 1.03 OV 1.04 ! PT 1.02 SC 1.28 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 1.02 KP 0.97 ! LA 1.00 MK 1.04 NL 1.04 OV 0.95 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.00* ! LA 1.07 MK 0.88 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.079923Jy sigma=0.000692 ! Fit after self-cal, rms=0.078770Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=3.963 mas, bpa=-28.26 degrees ! Estimated noise=755.104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264073 Jy ! Component: 100 - total flux cleaned = 0.00357903 Jy ! Component: 150 - total flux cleaned = 0.00421807 Jy ! Component: 200 - total flux cleaned = 0.00475883 Jy ! Total flux subtracted in 200 components = 0.00475883 Jy ! Clean residual min=-0.002923 max=0.002774 Jy/beam ! Clean residual mean=0.000005 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.240726 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.240726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078643Jy sigma=0.000680 ! Fit after self-cal, rms=0.078645Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078645Jy sigma=0.000680 ! Fit after self-cal, rms=0.077623Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=3.937 mas, bpa=-24.41 degrees ! Estimated noise=752.627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171259 Jy ! Component: 100 - total flux cleaned = 0.00224458 Jy ! Component: 150 - total flux cleaned = 0.00228626 Jy ! Component: 200 - total flux cleaned = 0.00232273 Jy ! Total flux subtracted in 200 components = 0.00232273 Jy ! Clean residual min=-0.002108 max=0.002661 Jy/beam ! Clean residual mean=-0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.243049 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 117 components and 0.243049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077566Jy sigma=0.000671 ! Fit after self-cal, rms=0.077583Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (77.5, -55). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242052 Jy ! Component: 100 - total flux cleaned = 0.00337734 Jy ! Component: 150 - total flux cleaned = 0.00379039 Jy ! Component: 200 - total flux cleaned = 0.00393382 Jy ! Total flux subtracted in 200 components = 0.00393382 Jy ! Clean residual min=-0.002003 max=0.002116 Jy/beam ! Clean residual mean=-0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.246983 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 0.246983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077493Jy sigma=0.000670 ! Fit after self-cal, rms=0.077486Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077486Jy sigma=0.000670 ! Fit after self-cal, rms=0.077554Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=3.935 mas, bpa=-23.69 degrees ! Estimated noise=752.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120749 Jy ! Component: 100 - total flux cleaned = 0.00172609 Jy ! Component: 150 - total flux cleaned = 0.00192177 Jy ! Component: 200 - total flux cleaned = 0.00195208 Jy ! Total flux subtracted in 200 components = 0.00195208 Jy ! Clean residual min=-0.001840 max=0.002013 Jy/beam ! Clean residual mean=-0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.248935 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 139 components and 0.248935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077522Jy sigma=0.000670 ! Fit after self-cal, rms=0.077523Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327269 Jy ! Component: 100 - total flux cleaned = 0.000411347 Jy ! Component: 150 - total flux cleaned = 0.000411736 Jy ! Component: 200 - total flux cleaned = 0.000411579 Jy ! Total flux subtracted in 200 components = 0.000411579 Jy ! Clean residual min=-0.001807 max=0.001945 Jy/beam ! Clean residual mean=-0.000001 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.249347 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 148 components and 0.249347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077505Jy sigma=0.000670 ! Fit after self-cal, rms=0.077503Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077503Jy sigma=0.000670 ! Fit after self-cal, rms=0.077545Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.589 mas, bmaj=8.204 mas, bpa=73.58 degrees ! Estimated noise=992.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105636 Jy ! Component: 100 - total flux cleaned = 0.00145832 Jy ! Component: 150 - total flux cleaned = 0.00156303 Jy ! Component: 200 - total flux cleaned = 0.00163887 Jy ! Total flux subtracted in 200 components = 0.00163887 Jy ! Clean residual min=-0.002533 max=0.002597 Jy/beam ! Clean residual mean=-0.000003 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.250985 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 162 components and 0.250985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077540Jy sigma=0.000670 ! Fit after self-cal, rms=0.077539Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293639 Jy ! Component: 100 - total flux cleaned = 0.000330348 Jy ! Component: 150 - total flux cleaned = 0.000397638 Jy ! Component: 200 - total flux cleaned = 0.000429267 Jy ! Total flux subtracted in 200 components = 0.000429267 Jy ! Clean residual min=-0.002543 max=0.002522 Jy/beam ! Clean residual mean=-0.000002 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.251415 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 169 components and 0.251415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077539Jy sigma=0.000669 ! Fit after self-cal, rms=0.077538Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=3.934 mas, bpa=-22.84 degrees ! Estimated noise=751.936 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.795 x 3.934 at -22.84 degrees (North through East) ! Clean map min=-0.0017725 max=0.16047 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=3.412 mas, bpa=-20.14 degrees ! Estimated noise=1092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122075 Jy ! Component: 100 - total flux cleaned = 0.163814 Jy ! Component: 150 - total flux cleaned = 0.185576 Jy ! Component: 200 - total flux cleaned = 0.198165 Jy ! Total flux subtracted in 200 components = 0.198165 Jy ! Clean residual min=-0.003824 max=0.006787 Jy/beam ! Clean residual mean=-0.000003 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.198165 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.198165 Jy ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=3.934 mas, bpa=-22.84 degrees ! Estimated noise=751.936 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117779 Jy ! Component: 100 - total flux cleaned = 0.0201426 Jy ! Component: 150 - total flux cleaned = 0.0263433 Jy ! Component: 200 - total flux cleaned = 0.031042 Jy ! Total flux subtracted in 200 components = 0.031042 Jy ! Clean residual min=-0.002506 max=0.002776 Jy/beam ! Clean residual mean=-0.000006 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.229207 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 66 components and 0.229207 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.589 mas, bmaj=8.204 mas, bpa=73.58 degrees ! Estimated noise=992.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665337 Jy ! Component: 100 - total flux cleaned = 0.0109155 Jy ! Component: 150 - total flux cleaned = 0.0139102 Jy ! Component: 200 - total flux cleaned = 0.0160901 Jy ! Total flux subtracted in 200 components = 0.0160901 Jy ! Clean residual min=-0.002796 max=0.002596 Jy/beam ! Clean residual mean=-0.000006 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.245297 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162824 Jy ! Component: 100 - total flux cleaned = 0.00286727 Jy ! Component: 150 - total flux cleaned = 0.00382393 Jy ! Component: 200 - total flux cleaned = 0.00435173 Jy ! Total flux subtracted in 200 components = 0.00435173 Jy ! Clean residual min=-0.002538 max=0.002485 Jy/beam ! Clean residual mean=-0.000004 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.249649 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 144 components and 0.249649 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=3.934 mas, bpa=-22.84 degrees ! Estimated noise=751.936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551031 Jy ! Component: 100 - total flux cleaned = 0.000892794 Jy ! Component: 150 - total flux cleaned = 0.00113795 Jy ! Component: 200 - total flux cleaned = 0.00126823 Jy ! Total flux subtracted in 200 components = 0.00126823 Jy ! Clean residual min=-0.001966 max=0.001968 Jy/beam ! Clean residual mean=-0.000001 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.250917 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 166 components and 0.250917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077627Jy sigma=0.000670 ! Fit after self-cal, rms=0.077610Jy sigma=0.000670 wmodel J0153+7115_S_2017_07_16_pus_map.mod ! Writing 166 model components to file: J0153+7115_S_2017_07_16_pus_map.mod wobs J0153+7115_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0153+7115_S_2017_07_16_pus_uvs.fits wwins J0153+7115_S_2017_07_16_pus_map.win ! wwins: Wrote 5 windows to J0153+7115_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143691 Jy ! Component: 100 - total flux cleaned = 0.000213075 Jy ! Component: 150 - total flux cleaned = 0.000213578 Jy ! Component: 200 - total flux cleaned = 0.0002135 Jy ! Component: 250 - total flux cleaned = 9.02331e-05 Jy ! Component: 300 - total flux cleaned = 0.000151461 Jy ! Component: 350 - total flux cleaned = 0.000151436 Jy ! Component: 400 - total flux cleaned = 3.57011e-05 Jy ! Component: 450 - total flux cleaned = 3.64072e-05 Jy ! Component: 500 - total flux cleaned = 6.46362e-05 Jy ! Component: 550 - total flux cleaned = 6.5006e-05 Jy ! Component: 600 - total flux cleaned = 0.000172732 Jy ! Component: 650 - total flux cleaned = 0.000225294 Jy ! Component: 700 - total flux cleaned = 0.000250724 Jy ! Component: 750 - total flux cleaned = 0.00027616 Jy ! Component: 800 - total flux cleaned = 0.00022553 Jy ! Component: 850 - total flux cleaned = 0.000275165 Jy ! Component: 900 - total flux cleaned = 0.00022622 Jy ! Component: 950 - total flux cleaned = 0.000250388 Jy ! Component: 1000 - total flux cleaned = 0.000297859 Jy ! Component: 1050 - total flux cleaned = 0.000320925 Jy ! Component: 1100 - total flux cleaned = 0.000297447 Jy ! Component: 1150 - total flux cleaned = 0.000297657 Jy ! Component: 1200 - total flux cleaned = 0.000342687 Jy ! Component: 1250 - total flux cleaned = 0.000365325 Jy ! Component: 1300 - total flux cleaned = 0.000431604 Jy ! Component: 1350 - total flux cleaned = 0.000366657 Jy ! Component: 1400 - total flux cleaned = 0.000517331 Jy ! Component: 1450 - total flux cleaned = 0.000559773 Jy ! Component: 1500 - total flux cleaned = 0.000538934 Jy ! Component: 1550 - total flux cleaned = 0.000642742 Jy ! Component: 1600 - total flux cleaned = 0.000642953 Jy ! Component: 1650 - total flux cleaned = 0.000704075 Jy ! Component: 1700 - total flux cleaned = 0.000744008 Jy ! Component: 1750 - total flux cleaned = 0.000783545 Jy ! Component: 1800 - total flux cleaned = 0.000842687 Jy ! Component: 1850 - total flux cleaned = 0.000823133 Jy ! Component: 1900 - total flux cleaned = 0.000881193 Jy ! Component: 1950 - total flux cleaned = 0.000938344 Jy ! Component: 2000 - total flux cleaned = 0.000957029 Jy ! Component: 2050 - total flux cleaned = 0.000994392 Jy ! Component: 2100 - total flux cleaned = 0.000994217 Jy ! Component: 2150 - total flux cleaned = 0.000921123 Jy ! Component: 2200 - total flux cleaned = 0.00104879 Jy ! Component: 2250 - total flux cleaned = 0.00103101 Jy ! Component: 2300 - total flux cleaned = 0.00112042 Jy ! Component: 2350 - total flux cleaned = 0.00113809 Jy ! Component: 2400 - total flux cleaned = 0.00120836 Jy ! Component: 2450 - total flux cleaned = 0.00119067 Jy ! Component: 2500 - total flux cleaned = 0.00124254 Jy ! Component: 2550 - total flux cleaned = 0.0012943 Jy ! Component: 2600 - total flux cleaned = 0.00127739 Jy ! Component: 2650 - total flux cleaned = 0.00126087 Jy ! Component: 2700 - total flux cleaned = 0.00134437 Jy ! Component: 2750 - total flux cleaned = 0.00134436 Jy ! Component: 2800 - total flux cleaned = 0.00134438 Jy ! Component: 2850 - total flux cleaned = 0.00139329 Jy ! Component: 2900 - total flux cleaned = 0.00139338 Jy ! Component: 2950 - total flux cleaned = 0.00144162 Jy ! Component: 3000 - total flux cleaned = 0.00147353 Jy ! Component: 3050 - total flux cleaned = 0.00155275 Jy ! Component: 3100 - total flux cleaned = 0.00156847 Jy ! Component: 3150 - total flux cleaned = 0.00158405 Jy ! Component: 3200 - total flux cleaned = 0.00164603 Jy ! Component: 3250 - total flux cleaned = 0.00169222 Jy ! Component: 3300 - total flux cleaned = 0.00170751 Jy ! Component: 3350 - total flux cleaned = 0.00178349 Jy ! Component: 3400 - total flux cleaned = 0.00175315 Jy ! Component: 3450 - total flux cleaned = 0.00182815 Jy ! Component: 3500 - total flux cleaned = 0.00176871 Jy ! Component: 3550 - total flux cleaned = 0.00188688 Jy ! Component: 3600 - total flux cleaned = 0.00185765 Jy ! Component: 3650 - total flux cleaned = 0.00188666 Jy ! Component: 3700 - total flux cleaned = 0.00191564 Jy ! Component: 3750 - total flux cleaned = 0.0019011 Jy ! Component: 3800 - total flux cleaned = 0.00192979 Jy ! Component: 3850 - total flux cleaned = 0.00198668 Jy ! Component: 3900 - total flux cleaned = 0.00192993 Jy ! Component: 3950 - total flux cleaned = 0.00192993 Jy ! Component: 4000 - total flux cleaned = 0.00194388 Jy ! Component: 4050 - total flux cleaned = 0.00201349 Jy ! Total flux subtracted in 4096 components = 0.00191654 Jy ! Clean residual min=-0.000734 max=0.000758 Jy/beam ! Clean residual mean=-0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.252834 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 489 components and 0.252833 Jy ![Exited script file: muppet] wmap "J0153+7115_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.795 x 3.934 at -22.84 degrees (North through East) ! Clean map min=-0.0013972 max=0.1608 Jy/beam ! Writing clean map to FITS file: J0153+7115_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.160805 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000245682 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.458349 0.458349 0.916699 1.8334 3.6668 7.33359 14.6672 29.3344 58.6687 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.16 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.795 x 3.934 at -22.84 degrees (North through East) ! Clean map min=-0.0013972 max=0.1608 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0153+7115_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:58:12 2019