! Started logfile: J0152-2942_S_2017_08_12_pus_uvs.log on Fri May 10 14:49:32 2019 obs J0152-2942_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0152-2942_S_2017_08_12_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.580851 visibilities/baseline/integration-bin. ! Found source: J0152-2942 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 9828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0152-2942_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 333 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 256 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 286 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 940 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.913505Jy sigma=0.006382 ! Fit after self-cal, rms=0.895837Jy sigma=0.006275 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.341 mas, bmaj=6.422 mas, bpa=-4.389 degrees ! Estimated noise=1648.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0802241 Jy ! Component: 100 - total flux cleaned = 0.105244 Jy ! Total flux subtracted in 100 components = 0.105244 Jy ! Clean residual min=-0.006210 max=0.010648 Jy/beam ! Clean residual mean=-0.000112 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 0.105244 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.105244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100632Jy sigma=0.000670 ! Fit after self-cal, rms=0.100526Jy sigma=0.000669 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.673 mas, bmaj=7.077 mas, bpa=-4.317 degrees ! Estimated noise=1338.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017014 Jy ! Component: 100 - total flux cleaned = 0.0255867 Jy ! Component: 150 - total flux cleaned = 0.0302358 Jy ! Component: 200 - total flux cleaned = 0.0327631 Jy ! Total flux subtracted in 200 components = 0.0327631 Jy ! Clean residual min=-0.004711 max=0.005148 Jy/beam ! Clean residual mean=-0.000061 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.138007 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 34 components and 0.138007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097928Jy sigma=0.000648 ! Fit after self-cal, rms=0.097843Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.01 ! LA 0.97 MK 0.99 NL 0.99 OV 1.04 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.25 KP 0.97 ! LA 0.92 MK 1.00 NL 1.02 OV 1.05 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 0.93 MK 1.04 NL 1.00 OV 0.95 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.097843Jy sigma=0.000648 ! Fit after self-cal, rms=0.100046Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=7.093 mas, bpa=-4.133 degrees ! Estimated noise=1333.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042901 Jy ! Component: 100 - total flux cleaned = 0.00441431 Jy ! Component: 150 - total flux cleaned = 0.00410318 Jy ! Component: 200 - total flux cleaned = 0.00382896 Jy ! Total flux subtracted in 200 components = 0.00382896 Jy ! Clean residual min=-0.003070 max=0.002977 Jy/beam ! Clean residual mean=-0.000016 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.141836 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.141836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099813Jy sigma=0.000644 ! Fit after self-cal, rms=0.099854Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099854Jy sigma=0.000644 ! Fit after self-cal, rms=0.098575Jy sigma=0.000643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=7.07 mas, bpa=-4.115 degrees ! Estimated noise=1323.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219558 Jy ! Component: 100 - total flux cleaned = 0.00251726 Jy ! Component: 150 - total flux cleaned = 0.00247389 Jy ! Component: 200 - total flux cleaned = 0.00235853 Jy ! Total flux subtracted in 200 components = 0.00235853 Jy ! Clean residual min=-0.002964 max=0.002585 Jy/beam ! Clean residual mean=-0.000008 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.144195 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.144195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098498Jy sigma=0.000643 ! Fit after self-cal, rms=0.098480Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000601764 Jy ! Component: 100 - total flux cleaned = 0.000563601 Jy ! Component: 150 - total flux cleaned = 0.00052938 Jy ! Component: 200 - total flux cleaned = 0.000431231 Jy ! Total flux subtracted in 200 components = 0.000431231 Jy ! Clean residual min=-0.002907 max=0.002532 Jy/beam ! Clean residual mean=-0.000007 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.144626 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 0.144626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098443Jy sigma=0.000643 ! Fit after self-cal, rms=0.098442Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098442Jy sigma=0.000643 ! Fit after self-cal, rms=0.099445Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.673 mas, bmaj=7.063 mas, bpa=-4.258 degrees ! Estimated noise=1326.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128897 Jy ! Component: 100 - total flux cleaned = 0.00145897 Jy ! Component: 150 - total flux cleaned = 0.00151373 Jy ! Component: 200 - total flux cleaned = 0.00151303 Jy ! Total flux subtracted in 200 components = 0.00151303 Jy ! Clean residual min=-0.002987 max=0.002382 Jy/beam ! Clean residual mean=-0.000004 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.146139 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.146139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099413Jy sigma=0.000642 ! Fit after self-cal, rms=0.099443Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273522 Jy ! Component: 100 - total flux cleaned = 0.000302633 Jy ! Component: 150 - total flux cleaned = 0.000277606 Jy ! Component: 200 - total flux cleaned = 0.000278158 Jy ! Total flux subtracted in 200 components = 0.000278158 Jy ! Clean residual min=-0.002990 max=0.002354 Jy/beam ! Clean residual mean=-0.000003 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.146417 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.146417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099422Jy sigma=0.000642 ! Fit after self-cal, rms=0.099423Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099423Jy sigma=0.000642 ! Fit after self-cal, rms=0.099315Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.62 mas, bmaj=20.02 mas, bpa=-4.968 degrees ! Estimated noise=1873.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119965 Jy ! Component: 100 - total flux cleaned = 0.00122644 Jy ! Component: 150 - total flux cleaned = 0.00127174 Jy ! Component: 200 - total flux cleaned = 0.0012913 Jy ! Total flux subtracted in 200 components = 0.0012913 Jy ! Clean residual min=-0.002123 max=0.002243 Jy/beam ! Clean residual mean=-0.000007 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.147709 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 105 components and 0.147709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099307Jy sigma=0.000642 ! Fit after self-cal, rms=0.099307Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114998 Jy ! Component: 100 - total flux cleaned = 5.77316e-05 Jy ! Component: 150 - total flux cleaned = 2.38055e-05 Jy ! Component: 200 - total flux cleaned = -6.51008e-06 Jy ! Total flux subtracted in 200 components = -6.51008e-06 Jy ! Clean residual min=-0.002126 max=0.002236 Jy/beam ! Clean residual mean=-0.000007 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.147702 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 110 components and 0.147702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099305Jy sigma=0.000642 ! Fit after self-cal, rms=0.099307Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.666 mas, bmaj=7.056 mas, bpa=-4.375 degrees ! Estimated noise=1328.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.666 x 7.056 at -4.375 degrees (North through East) ! Clean map min=-0.0028939 max=0.10433 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.333 mas, bmaj=6.397 mas, bpa=-4.38 degrees ! Estimated noise=1644.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0797465 Jy ! Component: 100 - total flux cleaned = 0.105825 Jy ! Component: 150 - total flux cleaned = 0.118442 Jy ! Component: 200 - total flux cleaned = 0.1269 Jy ! Total flux subtracted in 200 components = 0.1269 Jy ! Clean residual min=-0.004805 max=0.005328 Jy/beam ! Clean residual mean=-0.000048 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.1269 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.1269 Jy ! Inverting map and beam ! Estimated beam: bmin=2.666 mas, bmaj=7.056 mas, bpa=-4.375 degrees ! Estimated noise=1328.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00831327 Jy ! Component: 100 - total flux cleaned = 0.0134007 Jy ! Component: 150 - total flux cleaned = 0.0166956 Jy ! Component: 200 - total flux cleaned = 0.0188846 Jy ! Total flux subtracted in 200 components = 0.0188846 Jy ! Clean residual min=-0.003181 max=0.002700 Jy/beam ! Clean residual mean=-0.000010 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.145785 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 49 components and 0.145785 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.62 mas, bmaj=20.02 mas, bpa=-4.968 degrees ! Estimated noise=1873.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159672 Jy ! Component: 100 - total flux cleaned = 0.00177302 Jy ! Component: 150 - total flux cleaned = 0.00184124 Jy ! Component: 200 - total flux cleaned = 0.00190006 Jy ! Total flux subtracted in 200 components = 0.00190006 Jy ! Clean residual min=-0.002397 max=0.002364 Jy/beam ! Clean residual mean=-0.000007 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.147685 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.94667e-07 Jy ! Component: 100 - total flux cleaned = 2.24803e-06 Jy ! Component: 150 - total flux cleaned = 2.63619e-06 Jy ! Component: 200 - total flux cleaned = 3.60102e-06 Jy ! Total flux subtracted in 200 components = 3.60102e-06 Jy ! Clean residual min=-0.002311 max=0.002315 Jy/beam ! Clean residual mean=-0.000007 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.147689 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.147689 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.666 mas, bmaj=7.056 mas, bpa=-4.375 degrees ! Estimated noise=1328.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041006 Jy ! Component: 100 - total flux cleaned = 0.000410225 Jy ! Component: 150 - total flux cleaned = 0.000369626 Jy ! Component: 200 - total flux cleaned = 0.000299424 Jy ! Total flux subtracted in 200 components = 0.000299424 Jy ! Clean residual min=-0.002927 max=0.002678 Jy/beam ! Clean residual mean=-0.000002 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.147988 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 82 components and 0.147988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099366Jy sigma=0.000642 ! Fit after self-cal, rms=0.099371Jy sigma=0.000642 wmodel J0152-2942_S_2017_08_12_pus_map.mod ! Writing 82 model components to file: J0152-2942_S_2017_08_12_pus_map.mod wobs J0152-2942_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0152-2942_S_2017_08_12_pus_uvs.fits wwins J0152-2942_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0152-2942_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000807714 Jy ! Component: 100 - total flux cleaned = -0.0011803 Jy ! Component: 150 - total flux cleaned = -0.00139751 Jy ! Component: 200 - total flux cleaned = -0.00152028 Jy ! Component: 250 - total flux cleaned = -0.00148218 Jy ! Component: 300 - total flux cleaned = -0.00144376 Jy ! Component: 350 - total flux cleaned = -0.00137135 Jy ! Component: 400 - total flux cleaned = -0.00130257 Jy ! Component: 450 - total flux cleaned = -0.00130273 Jy ! Component: 500 - total flux cleaned = -0.00117119 Jy ! Component: 550 - total flux cleaned = -0.00110713 Jy ! Component: 600 - total flux cleaned = -0.000919297 Jy ! Component: 650 - total flux cleaned = -0.000766733 Jy ! Component: 700 - total flux cleaned = -0.000677342 Jy ! Component: 750 - total flux cleaned = -0.000443109 Jy ! Component: 800 - total flux cleaned = -0.000328997 Jy ! Component: 850 - total flux cleaned = -0.000273342 Jy ! Component: 900 - total flux cleaned = -0.000135929 Jy ! Component: 950 - total flux cleaned = -8.23847e-05 Jy ! Component: 1000 - total flux cleaned = -0.000109051 Jy ! Component: 1050 - total flux cleaned = -4.21156e-06 Jy ! Component: 1100 - total flux cleaned = 7.25701e-05 Jy ! Component: 1150 - total flux cleaned = 2.19861e-05 Jy ! Component: 1200 - total flux cleaned = 7.16961e-05 Jy ! Component: 1250 - total flux cleaned = 2.32147e-05 Jy ! Component: 1300 - total flux cleaned = 4.71769e-05 Jy ! Component: 1350 - total flux cleaned = 2.31458e-05 Jy ! Component: 1400 - total flux cleaned = -4.77494e-05 Jy ! Component: 1450 - total flux cleaned = -0.000140558 Jy ! Component: 1500 - total flux cleaned = -0.000186103 Jy ! Component: 1550 - total flux cleaned = -0.000253488 Jy ! Component: 1600 - total flux cleaned = -0.000341848 Jy ! Component: 1650 - total flux cleaned = -0.000385422 Jy ! Component: 1700 - total flux cleaned = -0.000471989 Jy ! Component: 1750 - total flux cleaned = -0.000557271 Jy ! Component: 1800 - total flux cleaned = -0.000661903 Jy ! Component: 1850 - total flux cleaned = -0.000765446 Jy ! Component: 1900 - total flux cleaned = -0.000847017 Jy ! Component: 1950 - total flux cleaned = -0.000887611 Jy ! Component: 2000 - total flux cleaned = -0.000987623 Jy ! Component: 2050 - total flux cleaned = -0.00106671 Jy ! Component: 2100 - total flux cleaned = -0.00110562 Jy ! Component: 2150 - total flux cleaned = -0.00114433 Jy ! Component: 2200 - total flux cleaned = -0.00120161 Jy ! Component: 2250 - total flux cleaned = -0.00122035 Jy ! Component: 2300 - total flux cleaned = -0.00131417 Jy ! Component: 2350 - total flux cleaned = -0.00135157 Jy ! Component: 2400 - total flux cleaned = -0.0014436 Jy ! Component: 2450 - total flux cleaned = -0.00153477 Jy ! Component: 2500 - total flux cleaned = -0.00169714 Jy ! Component: 2550 - total flux cleaned = -0.00175091 Jy ! Component: 2600 - total flux cleaned = -0.0018928 Jy ! Component: 2650 - total flux cleaned = -0.00198069 Jy ! Component: 2700 - total flux cleaned = -0.00205041 Jy ! Component: 2750 - total flux cleaned = -0.00217147 Jy ! Component: 2800 - total flux cleaned = -0.00224004 Jy ! Component: 2850 - total flux cleaned = -0.00230809 Jy ! Component: 2900 - total flux cleaned = -0.00234192 Jy ! Component: 2950 - total flux cleaned = -0.00235862 Jy ! Component: 3000 - total flux cleaned = -0.00240856 Jy ! Component: 3050 - total flux cleaned = -0.00250781 Jy ! Component: 3100 - total flux cleaned = -0.00255706 Jy ! Component: 3150 - total flux cleaned = -0.00254095 Jy ! Component: 3200 - total flux cleaned = -0.00258958 Jy ! Component: 3250 - total flux cleaned = -0.00262176 Jy ! Component: 3300 - total flux cleaned = -0.00265375 Jy ! Component: 3350 - total flux cleaned = -0.00265378 Jy ! Component: 3400 - total flux cleaned = -0.00270119 Jy ! Component: 3450 - total flux cleaned = -0.00268561 Jy ! Component: 3500 - total flux cleaned = -0.00273242 Jy ! Component: 3550 - total flux cleaned = -0.00273247 Jy ! Component: 3600 - total flux cleaned = -0.00277858 Jy ! Component: 3650 - total flux cleaned = -0.00277858 Jy ! Component: 3700 - total flux cleaned = -0.00285451 Jy ! Component: 3750 - total flux cleaned = -0.00285453 Jy ! Component: 3800 - total flux cleaned = -0.00286953 Jy ! Component: 3850 - total flux cleaned = -0.00283967 Jy ! Component: 3900 - total flux cleaned = -0.0028994 Jy ! Component: 3950 - total flux cleaned = -0.00297349 Jy ! Component: 4000 - total flux cleaned = -0.00297355 Jy ! Component: 4050 - total flux cleaned = -0.00297349 Jy ! Total flux subtracted in 4096 components = -0.00298811 Jy ! Clean residual min=-0.000867 max=0.000984 Jy/beam ! Clean residual mean=0.000002 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.145 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 341 components and 0.145 Jy ![Exited script file: muppet] wmap "J0152-2942_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.666 x 7.056 at -4.375 degrees (North through East) ! Clean map min=-0.0016966 max=0.10448 Jy/beam ! Writing clean map to FITS file: J0152-2942_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104479 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000244725 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.702702 0.702702 1.4054 2.81081 5.62162 11.2432 22.4865 44.9729 89.9459 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.666 x 7.056 at -4.375 degrees (North through East) ! Clean map min=-0.0016966 max=0.10448 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0152-2942_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:49:36 2019