! Started logfile: J0152-1412_S_2017_05_27_pus_uvs.log on Fri May 3 10:54:53 2019 obs J0152-1412_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0152-1412_S_2017_05_27_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.86029 visibilities/baseline/integration-bin. ! Found source: J0152-1412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 17808 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0152-1412_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 588 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.781609Jy sigma=0.056164 ! Fit after self-cal, rms=0.761780Jy sigma=0.056108 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=7.358 mas, bpa=6.99 degrees ! Estimated noise=396.795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0654932 Jy ! Component: 100 - total flux cleaned = 0.105544 Jy ! Total flux subtracted in 100 components = 0.105544 Jy ! Clean residual min=-0.025272 max=0.045019 Jy/beam ! Clean residual mean=-0.000157 rms=0.008205 Jy/beam ! Combined flux in latest and established models = 0.105544 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.105544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233208Jy sigma=0.003132 ! Fit after self-cal, rms=0.231738Jy sigma=0.003128 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=7.322 mas, bpa=3.165 degrees ! Estimated noise=360.894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0734353 Jy ! Component: 100 - total flux cleaned = 0.120419 Jy ! Component: 150 - total flux cleaned = 0.155024 Jy ! Component: 200 - total flux cleaned = 0.182661 Jy ! Total flux subtracted in 200 components = 0.182661 Jy ! Clean residual min=-0.026640 max=0.040854 Jy/beam ! Clean residual mean=-0.000095 rms=0.009583 Jy/beam ! Combined flux in latest and established models = 0.288205 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.288205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154519Jy sigma=0.003884 ! Fit after self-cal, rms=0.148830Jy sigma=0.003861 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 22.28 FD 0.71 HN 1.03 KP 0.85 ! LA 0.81 MK 0.93 NL 0.81 OV 0.86 ! PT 0.87 SC 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.73 HN 1.00 KP 0.81 ! LA 0.78 MK 0.91 NL 0.94 OV 0.84 ! PT 0.85 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.75 HN 0.99 KP 0.81 ! LA 0.81 MK 0.93 NL 0.90 OV 0.76 ! PT 0.84 SC 0.93 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.80 HN 1.13 KP 1.00* ! LA 0.60 MK 0.88 NL 1.00* OV 1.00* ! PT 0.85 SC 1.00* ! ! ! Fit before self-cal, rms=0.148830Jy sigma=0.003861 ! Fit after self-cal, rms=0.090015Jy sigma=0.000885 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=8.358 mas, bpa=-5.512 degrees ! Estimated noise=564.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00893229 Jy ! Component: 100 - total flux cleaned = 0.0113263 Jy ! Component: 150 - total flux cleaned = 0.0107783 Jy ! Component: 200 - total flux cleaned = 0.00986878 Jy ! Total flux subtracted in 200 components = 0.00986878 Jy ! Clean residual min=-0.012218 max=0.010849 Jy/beam ! Clean residual mean=0.000027 rms=0.002384 Jy/beam ! Combined flux in latest and established models = 0.298074 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.298074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081468Jy sigma=0.000804 ! Fit after self-cal, rms=0.078749Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078749Jy sigma=0.000773 ! Fit after self-cal, rms=0.071760Jy sigma=0.000754 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=8.241 mas, bpa=-5.878 degrees ! Estimated noise=541.958 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137877 Jy ! Component: 100 - total flux cleaned = 0.000386363 Jy ! Component: 150 - total flux cleaned = 0.000115772 Jy ! Component: 200 - total flux cleaned = 0.000128569 Jy ! Total flux subtracted in 200 components = 0.000128569 Jy ! Clean residual min=-0.010182 max=0.006532 Jy/beam ! Clean residual mean=0.000015 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.298202 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.298202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069094Jy sigma=0.000723 ! Fit after self-cal, rms=0.068924Jy sigma=0.000722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224179 Jy ! Component: 100 - total flux cleaned = -0.000445034 Jy ! Component: 150 - total flux cleaned = -0.000445845 Jy ! Component: 200 - total flux cleaned = -0.000635899 Jy ! Total flux subtracted in 200 components = -0.000635899 Jy ! Clean residual min=-0.008779 max=0.005880 Jy/beam ! Clean residual mean=0.000016 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.297566 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 60 components and 0.297566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067790Jy sigma=0.000708 ! Fit after self-cal, rms=0.067729Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067729Jy sigma=0.000708 ! Fit after self-cal, rms=0.066264Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.227 mas, bpa=-5.906 degrees ! Estimated noise=537.061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149393 Jy ! Component: 100 - total flux cleaned = -0.00184091 Jy ! Component: 150 - total flux cleaned = -0.00183557 Jy ! Component: 200 - total flux cleaned = -0.00197195 Jy ! Total flux subtracted in 200 components = -0.00197195 Jy ! Clean residual min=-0.007616 max=0.004989 Jy/beam ! Clean residual mean=0.000013 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.295594 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 75 components and 0.295594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065523Jy sigma=0.000697 ! Fit after self-cal, rms=0.065467Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284189 Jy ! Component: 100 - total flux cleaned = -0.000535093 Jy ! Component: 150 - total flux cleaned = -0.000650572 Jy ! Component: 200 - total flux cleaned = -0.000866532 Jy ! Total flux subtracted in 200 components = -0.000866532 Jy ! Clean residual min=-0.006870 max=0.004808 Jy/beam ! Clean residual mean=0.000013 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.294728 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 83 components and 0.294728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065059Jy sigma=0.000692 ! Fit after self-cal, rms=0.065033Jy sigma=0.000691 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065033Jy sigma=0.000691 ! Fit after self-cal, rms=0.064366Jy sigma=0.000690 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.375 mas, bmaj=16.26 mas, bpa=-4.89 degrees ! Estimated noise=663.924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.77896e-07 Jy ! Component: 100 - total flux cleaned = -0.000335835 Jy ! Component: 150 - total flux cleaned = -0.000506214 Jy ! Component: 200 - total flux cleaned = -0.000726939 Jy ! Total flux subtracted in 200 components = -0.000726939 Jy ! Clean residual min=-0.005478 max=0.005776 Jy/beam ! Clean residual mean=0.000025 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.294001 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.294001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064200Jy sigma=0.000688 ! Fit after self-cal, rms=0.064137Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112608 Jy ! Component: 100 - total flux cleaned = -0.0001266 Jy ! Component: 150 - total flux cleaned = -0.00026674 Jy ! Component: 200 - total flux cleaned = -0.000331007 Jy ! Total flux subtracted in 200 components = -0.000331007 Jy ! Clean residual min=-0.005172 max=0.005535 Jy/beam ! Clean residual mean=0.000027 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.29367 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.29367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064054Jy sigma=0.000686 ! Fit after self-cal, rms=0.064029Jy sigma=0.000686 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.238 mas, bpa=-5.937 degrees ! Estimated noise=534.848 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.143 x 8.238 at -5.937 degrees (North through East) ! Clean map min=-0.0060101 max=0.14743 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.497 mas, bmaj=7.323 mas, bpa=-7.069 degrees ! Estimated noise=895.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131935 Jy ! Component: 100 - total flux cleaned = 0.181615 Jy ! Component: 150 - total flux cleaned = 0.209932 Jy ! Component: 200 - total flux cleaned = 0.228819 Jy ! Total flux subtracted in 200 components = 0.228819 Jy ! Clean residual min=-0.006374 max=0.010795 Jy/beam ! Clean residual mean=-0.000086 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 0.228819 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.228819 Jy ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.238 mas, bpa=-5.937 degrees ! Estimated noise=534.848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201481 Jy ! Component: 100 - total flux cleaned = 0.0325472 Jy ! Component: 150 - total flux cleaned = 0.0409345 Jy ! Component: 200 - total flux cleaned = 0.0468468 Jy ! Total flux subtracted in 200 components = 0.0468468 Jy ! Clean residual min=-0.004365 max=0.004759 Jy/beam ! Clean residual mean=-0.000004 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.275666 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 87 components and 0.275666 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.375 mas, bmaj=16.26 mas, bpa=-4.89 degrees ! Estimated noise=663.924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00662887 Jy ! Component: 100 - total flux cleaned = 0.0100143 Jy ! Component: 150 - total flux cleaned = 0.0121365 Jy ! Component: 200 - total flux cleaned = 0.0129888 Jy ! Total flux subtracted in 200 components = 0.0129888 Jy ! Clean residual min=-0.005178 max=0.005708 Jy/beam ! Clean residual mean=0.000021 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.288655 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (78.5, -113). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493926 Jy ! Component: 100 - total flux cleaned = 0.00625971 Jy ! Component: 150 - total flux cleaned = 0.00719219 Jy ! Component: 200 - total flux cleaned = 0.00752303 Jy ! Total flux subtracted in 200 components = 0.00752303 Jy ! Clean residual min=-0.004311 max=0.003594 Jy/beam ! Clean residual mean=0.000015 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.296178 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 181 components and 0.296178 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.238 mas, bpa=-5.937 degrees ! Estimated noise=534.848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125729 Jy ! Component: 100 - total flux cleaned = -0.00154949 Jy ! Component: 150 - total flux cleaned = -0.00155349 Jy ! Component: 200 - total flux cleaned = -0.00155431 Jy ! Total flux subtracted in 200 components = -0.00155431 Jy ! Clean residual min=-0.003667 max=0.003073 Jy/beam ! Clean residual mean=0.000007 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.294624 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 203 components and 0.294624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063081Jy sigma=0.000676 ! Fit after self-cal, rms=0.062938Jy sigma=0.000674 wmodel J0152-1412_S_2017_05_27_pus_map.mod ! Writing 203 model components to file: J0152-1412_S_2017_05_27_pus_map.mod wobs J0152-1412_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0152-1412_S_2017_05_27_pus_uvs.fits wwins J0152-1412_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J0152-1412_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153368 Jy ! Component: 100 - total flux cleaned = -0.00229778 Jy ! Component: 150 - total flux cleaned = -0.00284801 Jy ! Component: 200 - total flux cleaned = -0.0035025 Jy ! Component: 250 - total flux cleaned = -0.00385549 Jy ! Component: 300 - total flux cleaned = -0.00372983 Jy ! Component: 350 - total flux cleaned = -0.0036897 Jy ! Component: 400 - total flux cleaned = -0.00380461 Jy ! Component: 450 - total flux cleaned = -0.0037296 Jy ! Component: 500 - total flux cleaned = -0.00362031 Jy ! Component: 550 - total flux cleaned = -0.00358369 Jy ! Component: 600 - total flux cleaned = -0.00341205 Jy ! Component: 650 - total flux cleaned = -0.00331242 Jy ! Component: 700 - total flux cleaned = -0.0032805 Jy ! Component: 750 - total flux cleaned = -0.00312255 Jy ! Component: 800 - total flux cleaned = -0.0030914 Jy ! Component: 850 - total flux cleaned = -0.00291001 Jy ! Component: 900 - total flux cleaned = -0.00282169 Jy ! Component: 950 - total flux cleaned = -0.0027351 Jy ! Component: 1000 - total flux cleaned = -0.00267857 Jy ! Component: 1050 - total flux cleaned = -0.00259555 Jy ! Component: 1100 - total flux cleaned = -0.00251473 Jy ! Component: 1150 - total flux cleaned = -0.0024886 Jy ! Component: 1200 - total flux cleaned = -0.00243715 Jy ! Component: 1250 - total flux cleaned = -0.0024123 Jy ! Component: 1300 - total flux cleaned = -0.00231366 Jy ! Component: 1350 - total flux cleaned = -0.00226555 Jy ! Component: 1400 - total flux cleaned = -0.00221875 Jy ! Component: 1450 - total flux cleaned = -0.00221928 Jy ! Component: 1500 - total flux cleaned = -0.00221991 Jy ! Component: 1550 - total flux cleaned = -0.00224231 Jy ! Component: 1600 - total flux cleaned = -0.00219829 Jy ! Component: 1650 - total flux cleaned = -0.00219816 Jy ! Component: 1700 - total flux cleaned = -0.0021555 Jy ! Component: 1750 - total flux cleaned = -0.00215552 Jy ! Component: 1800 - total flux cleaned = -0.00217608 Jy ! Component: 1850 - total flux cleaned = -0.00215577 Jy ! Component: 1900 - total flux cleaned = -0.00217576 Jy ! Component: 1950 - total flux cleaned = -0.00221484 Jy ! Component: 2000 - total flux cleaned = -0.00223433 Jy ! Component: 2050 - total flux cleaned = -0.00227234 Jy ! Component: 2100 - total flux cleaned = -0.00229126 Jy ! Component: 2150 - total flux cleaned = -0.00234669 Jy ! Component: 2200 - total flux cleaned = -0.00238283 Jy ! Component: 2250 - total flux cleaned = -0.00238291 Jy ! Component: 2300 - total flux cleaned = -0.00241835 Jy ! Component: 2350 - total flux cleaned = -0.00241855 Jy ! Component: 2400 - total flux cleaned = -0.00250454 Jy ! Component: 2450 - total flux cleaned = -0.00248794 Jy ! Component: 2500 - total flux cleaned = -0.00247144 Jy ! Component: 2550 - total flux cleaned = -0.00253785 Jy ! Component: 2600 - total flux cleaned = -0.00258692 Jy ! Component: 2650 - total flux cleaned = -0.00255473 Jy ! Component: 2700 - total flux cleaned = -0.00261855 Jy ! Component: 2750 - total flux cleaned = -0.00261849 Jy ! Component: 2800 - total flux cleaned = -0.00260321 Jy ! Component: 2850 - total flux cleaned = -0.00263391 Jy ! Component: 2900 - total flux cleaned = -0.00261893 Jy ! Component: 2950 - total flux cleaned = -0.00261882 Jy ! Component: 3000 - total flux cleaned = -0.00261895 Jy ! Component: 3050 - total flux cleaned = -0.00261871 Jy ! Component: 3100 - total flux cleaned = -0.00256067 Jy ! Component: 3150 - total flux cleaned = -0.00257486 Jy ! Component: 3200 - total flux cleaned = -0.00254641 Jy ! Component: 3250 - total flux cleaned = -0.00243409 Jy ! Component: 3300 - total flux cleaned = -0.00244832 Jy ! Component: 3350 - total flux cleaned = -0.0024211 Jy ! Component: 3400 - total flux cleaned = -0.00242113 Jy ! Component: 3450 - total flux cleaned = -0.00234028 Jy ! Component: 3500 - total flux cleaned = -0.00231365 Jy ! Component: 3550 - total flux cleaned = -0.00230036 Jy ! Component: 3600 - total flux cleaned = -0.00226104 Jy ! Component: 3650 - total flux cleaned = -0.00222223 Jy ! Component: 3700 - total flux cleaned = -0.00218371 Jy ! Component: 3750 - total flux cleaned = -0.00215821 Jy ! Component: 3800 - total flux cleaned = -0.00213295 Jy ! Component: 3850 - total flux cleaned = -0.00209546 Jy ! Component: 3900 - total flux cleaned = -0.00208313 Jy ! Component: 3950 - total flux cleaned = -0.00207087 Jy ! Component: 4000 - total flux cleaned = -0.00201029 Jy ! Component: 4050 - total flux cleaned = -0.00198629 Jy ! Total flux subtracted in 4096 components = -0.0019505 Jy ! Clean residual min=-0.000627 max=0.000637 Jy/beam ! Clean residual mean=-0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.292673 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 502 components and 0.292674 Jy ![Exited script file: muppet] wmap "J0152-1412_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.143 x 8.238 at -5.937 degrees (North through East) ! Clean map min=-0.0021046 max=0.15913 Jy/beam ! Writing clean map to FITS file: J0152-1412_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.159126 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000221672 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.417919 0.417919 0.835838 1.67168 3.34335 6.6867 13.3734 26.7468 53.4936 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.159 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.143 x 8.238 at -5.937 degrees (North through East) ! Clean map min=-0.0021046 max=0.15913 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0152-1412_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:54:58 2019