! Started logfile: J0152+0020_S_2017_01_21_pus_uvs.log on Sun May 5 15:43:31 2019 obs J0152+0020_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0152+0020_S_2017_01_21_pus_uva.fits ! AN table 1: 178 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.755462 visibilities/baseline/integration-bin. ! Found source: J0152+0020 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 19364 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0152+0020_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 255 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 255 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 737 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968074Jy sigma=0.007349 ! Fit after self-cal, rms=0.940788Jy sigma=0.007181 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=6.709 mas, bpa=-6.097 degrees ! Estimated noise=1196.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0494493 Jy ! Component: 100 - total flux cleaned = 0.0606344 Jy ! Total flux subtracted in 100 components = 0.0606344 Jy ! Clean residual min=-0.003348 max=0.004001 Jy/beam ! Clean residual mean=0.000004 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.0606344 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0606344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094260Jy sigma=0.000652 ! Fit after self-cal, rms=0.093875Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.022 mas, bmaj=7.26 mas, bpa=-3.928 degrees ! Estimated noise=748.153 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387839 Jy ! Component: 100 - total flux cleaned = 0.00561568 Jy ! Component: 150 - total flux cleaned = 0.00611743 Jy ! Component: 200 - total flux cleaned = 0.00628117 Jy ! Total flux subtracted in 200 components = 0.00628117 Jy ! Clean residual min=-0.002309 max=0.002532 Jy/beam ! Clean residual mean=0.000009 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0669156 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.0669156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093707Jy sigma=0.000648 ! Fit after self-cal, rms=0.093713Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 1.00 LA 0.95 ! MK 1.02 NL 1.03 OV 1.05 PT 0.94 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.90 HN 1.03 LA 0.98 ! MK 1.04 NL 1.06 OV 1.13 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.10 HN 1.04 LA 1.02 ! MK 1.01 NL 1.03 OV 1.01 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 0.95 LA 0.91 ! MK 0.82 NL 1.00* OV 0.97 PT 0.97 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.093713Jy sigma=0.000648 ! Fit after self-cal, rms=0.092874Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=7.264 mas, bpa=-3.925 degrees ! Estimated noise=748.197 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372729 Jy ! Component: 100 - total flux cleaned = 0.000398141 Jy ! Component: 150 - total flux cleaned = 0.000418614 Jy ! Component: 200 - total flux cleaned = 0.000435494 Jy ! Total flux subtracted in 200 components = 0.000435494 Jy ! Clean residual min=-0.001951 max=0.002430 Jy/beam ! Clean residual mean=0.000011 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0673511 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 24 components and 0.0673511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092863Jy sigma=0.000647 ! Fit after self-cal, rms=0.092889Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092889Jy sigma=0.000647 ! Fit after self-cal, rms=0.092691Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=7.255 mas, bpa=-3.9 degrees ! Estimated noise=751.067 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.9634e-05 Jy ! Component: 100 - total flux cleaned = 8.25783e-05 Jy ! Component: 150 - total flux cleaned = 9.41963e-05 Jy ! Component: 200 - total flux cleaned = 0.000104619 Jy ! Total flux subtracted in 200 components = 0.000104619 Jy ! Clean residual min=-0.001888 max=0.002662 Jy/beam ! Clean residual mean=0.000007 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.0674557 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.0674557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092687Jy sigma=0.000646 ! Fit after self-cal, rms=0.092688Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (84.5, -87.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227592 Jy ! Component: 100 - total flux cleaned = 0.00341806 Jy ! Component: 150 - total flux cleaned = 0.00417796 Jy ! Component: 200 - total flux cleaned = 0.0046322 Jy ! Total flux subtracted in 200 components = 0.0046322 Jy ! Clean residual min=-0.001802 max=0.001802 Jy/beam ! Clean residual mean=0.000007 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0720879 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 0.0720879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092634Jy sigma=0.000645 ! Fit after self-cal, rms=0.092612Jy sigma=0.000645 ! Inverting map ! Added new window around map position (-95.5, 116.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174182 Jy ! Component: 100 - total flux cleaned = 0.00242137 Jy ! Component: 150 - total flux cleaned = 0.00291105 Jy ! Component: 200 - total flux cleaned = 0.00331141 Jy ! Total flux subtracted in 200 components = 0.00331141 Jy ! Clean residual min=-0.001611 max=0.001850 Jy/beam ! Clean residual mean=0.000005 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0753993 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 0.0753993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092573Jy sigma=0.000645 ! Fit after self-cal, rms=0.092556Jy sigma=0.000645 ! Inverting map ! Added new window around map position (-98, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000987262 Jy ! Component: 100 - total flux cleaned = 0.00110908 Jy ! Component: 150 - total flux cleaned = 0.00140333 Jy ! Component: 200 - total flux cleaned = 0.00160253 Jy ! Total flux subtracted in 200 components = 0.00160253 Jy ! Clean residual min=-0.001565 max=0.001605 Jy/beam ! Clean residual mean=0.000005 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0770018 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 91 components and 0.0770018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092512Jy sigma=0.000644 ! Fit after self-cal, rms=0.092487Jy sigma=0.000644 ! Inverting map ! Added new window around map position (-11, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131793 Jy ! Component: 100 - total flux cleaned = 0.00163331 Jy ! Component: 150 - total flux cleaned = 0.00180141 Jy ! Component: 200 - total flux cleaned = 0.00192504 Jy ! Total flux subtracted in 200 components = 0.00192504 Jy ! Clean residual min=-0.001427 max=0.001490 Jy/beam ! Clean residual mean=0.000005 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0789269 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 0.0789269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092453Jy sigma=0.000644 ! Fit after self-cal, rms=0.092443Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092443Jy sigma=0.000644 ! Fit after self-cal, rms=0.091726Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=7.245 mas, bpa=-3.874 degrees ! Estimated noise=743.581 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121119 Jy ! Component: 100 - total flux cleaned = 0.00166718 Jy ! Component: 150 - total flux cleaned = 0.00196715 Jy ! Component: 200 - total flux cleaned = 0.00211714 Jy ! Total flux subtracted in 200 components = 0.00211714 Jy ! Clean residual min=-0.001332 max=0.001396 Jy/beam ! Clean residual mean=0.000003 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.081044 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 117 components and 0.081044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091699Jy sigma=0.000643 ! Fit after self-cal, rms=0.091697Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814319 Jy ! Component: 100 - total flux cleaned = 0.000901102 Jy ! Component: 150 - total flux cleaned = 0.000928707 Jy ! Component: 200 - total flux cleaned = 0.000980972 Jy ! Total flux subtracted in 200 components = 0.000980972 Jy ! Clean residual min=-0.001324 max=0.001411 Jy/beam ! Clean residual mean=0.000003 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.082025 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 130 components and 0.082025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091680Jy sigma=0.000643 ! Fit after self-cal, rms=0.091676Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091676Jy sigma=0.000643 ! Fit after self-cal, rms=0.091612Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.814 mas, bmaj=11.81 mas, bpa=1.7 degrees ! Estimated noise=950.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000673738 Jy ! Component: 100 - total flux cleaned = 0.00115412 Jy ! Component: 150 - total flux cleaned = 0.00128801 Jy ! Component: 200 - total flux cleaned = 0.00131113 Jy ! Total flux subtracted in 200 components = 0.00131113 Jy ! Clean residual min=-0.001456 max=0.001466 Jy/beam ! Clean residual mean=0.000005 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0833361 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 151 components and 0.0833361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091607Jy sigma=0.000643 ! Fit after self-cal, rms=0.091610Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387464 Jy ! Component: 100 - total flux cleaned = 0.000504193 Jy ! Component: 150 - total flux cleaned = 0.000504866 Jy ! Component: 200 - total flux cleaned = 0.000578063 Jy ! Total flux subtracted in 200 components = 0.000578063 Jy ! Clean residual min=-0.001429 max=0.001458 Jy/beam ! Clean residual mean=0.000005 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0839142 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 161 components and 0.0839142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091608Jy sigma=0.000643 ! Fit after self-cal, rms=0.091609Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=7.238 mas, bpa=-3.844 degrees ! Estimated noise=742.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 7.238 at -3.844 degrees (North through East) ! Clean map min=-0.001812 max=0.064047 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.614 mas, bmaj=6.695 mas, bpa=-6.125 degrees ! Estimated noise=1178.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048986 Jy ! Component: 100 - total flux cleaned = 0.0602949 Jy ! Component: 150 - total flux cleaned = 0.0660168 Jy ! Component: 200 - total flux cleaned = 0.0701547 Jy ! Total flux subtracted in 200 components = 0.0701547 Jy ! Clean residual min=-0.003323 max=0.003315 Jy/beam ! Clean residual mean=0.000002 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.0701548 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0701548 Jy ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=7.238 mas, bpa=-3.844 degrees ! Estimated noise=742.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345189 Jy ! Component: 100 - total flux cleaned = 0.00564755 Jy ! Component: 150 - total flux cleaned = 0.00737561 Jy ! Component: 200 - total flux cleaned = 0.00856594 Jy ! Total flux subtracted in 200 components = 0.00856594 Jy ! Clean residual min=-0.001783 max=0.001996 Jy/beam ! Clean residual mean=0.000005 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0787207 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 50 components and 0.0787207 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.814 mas, bmaj=11.81 mas, bpa=1.7 degrees ! Estimated noise=950.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223824 Jy ! Component: 100 - total flux cleaned = 0.0033885 Jy ! Component: 150 - total flux cleaned = 0.0040462 Jy ! Component: 200 - total flux cleaned = 0.00464963 Jy ! Total flux subtracted in 200 components = 0.00464963 Jy ! Clean residual min=-0.001757 max=0.001548 Jy/beam ! Clean residual mean=0.000007 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0833704 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319813 Jy ! Component: 100 - total flux cleaned = 0.000605476 Jy ! Component: 150 - total flux cleaned = 0.000799452 Jy ! Component: 200 - total flux cleaned = 0.000857953 Jy ! Total flux subtracted in 200 components = 0.000857953 Jy ! Clean residual min=-0.001646 max=0.001431 Jy/beam ! Clean residual mean=0.000007 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0842283 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 97 components and 0.0842283 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=7.238 mas, bpa=-3.844 degrees ! Estimated noise=742.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.70906e-05 Jy ! Component: 100 - total flux cleaned = 0.000166609 Jy ! Component: 150 - total flux cleaned = 0.000209581 Jy ! Component: 200 - total flux cleaned = 0.000132013 Jy ! Total flux subtracted in 200 components = 0.000132013 Jy ! Clean residual min=-0.001328 max=0.001303 Jy/beam ! Clean residual mean=0.000002 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0843603 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 0.0843603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091660Jy sigma=0.000643 ! Fit after self-cal, rms=0.091657Jy sigma=0.000643 wmodel J0152+0020_S_2017_01_21_pus_map.mod ! Writing 116 model components to file: J0152+0020_S_2017_01_21_pus_map.mod wobs J0152+0020_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0152+0020_S_2017_01_21_pus_uvs.fits wwins J0152+0020_S_2017_01_21_pus_map.win ! wwins: Wrote 5 windows to J0152+0020_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.17367e-05 Jy ! Component: 100 - total flux cleaned = 9.17493e-05 Jy ! Component: 150 - total flux cleaned = 0.000225101 Jy ! Component: 200 - total flux cleaned = 0.000332263 Jy ! Component: 250 - total flux cleaned = 0.000416061 Jy ! Component: 300 - total flux cleaned = 0.000518152 Jy ! Component: 350 - total flux cleaned = 0.000557621 Jy ! Component: 400 - total flux cleaned = 0.000576961 Jy ! Component: 450 - total flux cleaned = 0.000576725 Jy ! Component: 500 - total flux cleaned = 0.000576738 Jy ! Component: 550 - total flux cleaned = 0.000576861 Jy ! Component: 600 - total flux cleaned = 0.000595091 Jy ! Component: 650 - total flux cleaned = 0.000612644 Jy ! Component: 700 - total flux cleaned = 0.00059545 Jy ! Component: 750 - total flux cleaned = 0.000578854 Jy ! Component: 800 - total flux cleaned = 0.000545678 Jy ! Component: 850 - total flux cleaned = 0.000578846 Jy ! Component: 900 - total flux cleaned = 0.000513989 Jy ! Component: 950 - total flux cleaned = 0.000530218 Jy ! Component: 1000 - total flux cleaned = 0.000561987 Jy ! Component: 1050 - total flux cleaned = 0.000546201 Jy ! Component: 1100 - total flux cleaned = 0.00053074 Jy ! Component: 1150 - total flux cleaned = 0.000545873 Jy ! Component: 1200 - total flux cleaned = 0.000515612 Jy ! Component: 1250 - total flux cleaned = 0.000574774 Jy ! Component: 1300 - total flux cleaned = 0.000603747 Jy ! Component: 1350 - total flux cleaned = 0.00057505 Jy ! Component: 1400 - total flux cleaned = 0.000575346 Jy ! Component: 1450 - total flux cleaned = 0.000589871 Jy ! Component: 1500 - total flux cleaned = 0.000617849 Jy ! Component: 1550 - total flux cleaned = 0.000645365 Jy ! Component: 1600 - total flux cleaned = 0.000672631 Jy ! Component: 1650 - total flux cleaned = 0.000726739 Jy ! Component: 1700 - total flux cleaned = 0.000713405 Jy ! Component: 1750 - total flux cleaned = 0.000726727 Jy ! Component: 1800 - total flux cleaned = 0.000713528 Jy ! Component: 1850 - total flux cleaned = 0.000739242 Jy ! Component: 1900 - total flux cleaned = 0.000765076 Jy ! Component: 1950 - total flux cleaned = 0.000765213 Jy ! Component: 2000 - total flux cleaned = 0.000778048 Jy ! Component: 2050 - total flux cleaned = 0.000815826 Jy ! Component: 2100 - total flux cleaned = 0.000865737 Jy ! Component: 2150 - total flux cleaned = 0.000902905 Jy ! Component: 2200 - total flux cleaned = 0.00092742 Jy ! Component: 2250 - total flux cleaned = 0.000976024 Jy ! Component: 2300 - total flux cleaned = 0.00102432 Jy ! Component: 2350 - total flux cleaned = 0.00108413 Jy ! Component: 2400 - total flux cleaned = 0.00110783 Jy ! Component: 2450 - total flux cleaned = 0.00120207 Jy ! Component: 2500 - total flux cleaned = 0.0012136 Jy ! Component: 2550 - total flux cleaned = 0.00124838 Jy ! Component: 2600 - total flux cleaned = 0.00122547 Jy ! Component: 2650 - total flux cleaned = 0.00128261 Jy ! Component: 2700 - total flux cleaned = 0.00129382 Jy ! Component: 2750 - total flux cleaned = 0.0012938 Jy ! Component: 2800 - total flux cleaned = 0.00133866 Jy ! Component: 2850 - total flux cleaned = 0.001372 Jy ! Component: 2900 - total flux cleaned = 0.00137208 Jy ! Component: 2950 - total flux cleaned = 0.00140517 Jy ! Component: 3000 - total flux cleaned = 0.0014489 Jy ! Component: 3050 - total flux cleaned = 0.00145975 Jy ! Component: 3100 - total flux cleaned = 0.00145991 Jy ! Component: 3150 - total flux cleaned = 0.001535 Jy ! Component: 3200 - total flux cleaned = 0.00160943 Jy ! Component: 3250 - total flux cleaned = 0.0016305 Jy ! Component: 3300 - total flux cleaned = 0.00167253 Jy ! Component: 3350 - total flux cleaned = 0.00168298 Jy ! Component: 3400 - total flux cleaned = 0.00175575 Jy ! Component: 3450 - total flux cleaned = 0.00177647 Jy ! Component: 3500 - total flux cleaned = 0.00183803 Jy ! Component: 3550 - total flux cleaned = 0.00188901 Jy ! Component: 3600 - total flux cleaned = 0.0019295 Jy ! Component: 3650 - total flux cleaned = 0.00197991 Jy ! Component: 3700 - total flux cleaned = 0.00203016 Jy ! Component: 3750 - total flux cleaned = 0.00207998 Jy ! Component: 3800 - total flux cleaned = 0.00209981 Jy ! Component: 3850 - total flux cleaned = 0.00217882 Jy ! Component: 3900 - total flux cleaned = 0.00224772 Jy ! Component: 3950 - total flux cleaned = 0.00231611 Jy ! Component: 4000 - total flux cleaned = 0.00239386 Jy ! Component: 4050 - total flux cleaned = 0.00249047 Jy ! Total flux subtracted in 4096 components = 0.00255785 Jy ! Clean residual min=-0.000576 max=0.000676 Jy/beam ! Clean residual mean=0.000003 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.0869182 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 405 components and 0.0869183 Jy ![Exited script file: muppet] wmap "J0152+0020_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 7.238 at -3.844 degrees (North through East) ! Clean map min=-0.0016612 max=0.063456 Jy/beam ! Writing clean map to FITS file: J0152+0020_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0634561 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000175445 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.829449 0.829449 1.6589 3.31779 6.63559 13.2712 26.5424 53.0847 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 7.238 at -3.844 degrees (North through East) ! Clean map min=-0.0016612 max=0.063456 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0152+0020_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:43:37 2019