! Started logfile: J0151-3435_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:33:31 2019 obs J0151-3435_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0151-3435_S_2017_05_31_pus_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784795 visibilities/baseline/integration-bin. ! Found source: J0151-3435 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 5368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0151-3435_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.889008Jy sigma=0.005679 ! Fit after self-cal, rms=0.869506Jy sigma=0.005567 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=7.01 mas, bpa=4.201 degrees ! Estimated noise=3011.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10688 Jy ! Component: 100 - total flux cleaned = 0.130362 Jy ! Total flux subtracted in 100 components = 0.130362 Jy ! Clean residual min=-0.008635 max=0.012615 Jy/beam ! Clean residual mean=-0.000081 rms=0.002616 Jy/beam ! Combined flux in latest and established models = 0.130362 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.130362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128520Jy sigma=0.000673 ! Fit after self-cal, rms=0.128509Jy sigma=0.000673 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=8.077 mas, bpa=4.308 degrees ! Estimated noise=1846.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108716 Jy ! Component: 100 - total flux cleaned = 0.0160984 Jy ! Component: 150 - total flux cleaned = 0.0187059 Jy ! Component: 200 - total flux cleaned = 0.0196881 Jy ! Total flux subtracted in 200 components = 0.0196881 Jy ! Clean residual min=-0.006464 max=0.007670 Jy/beam ! Clean residual mean=-0.000067 rms=0.001749 Jy/beam ! Combined flux in latest and established models = 0.15005 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.15005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127392Jy sigma=0.000668 ! Fit after self-cal, rms=0.127419Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.70 FD 1.00 HN 1.00* KP 1.06 ! LA 0.99 MK 0.99 NL 1.12 OV 1.03 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.96 ! LA 1.00 MK 0.94 NL 1.25 OV 1.08 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.98 ! LA 0.98 MK 1.05 NL 1.26 OV 0.98 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.00* KP 0.87 ! LA 0.77 MK 1.11 NL 1.00* OV 1.00* ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.127419Jy sigma=0.000668 ! Fit after self-cal, rms=0.123856Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=8.056 mas, bpa=4.623 degrees ! Estimated noise=1846.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.9181e-05 Jy ! Component: 100 - total flux cleaned = 7.17855e-05 Jy ! Component: 150 - total flux cleaned = 0.000101914 Jy ! Component: 200 - total flux cleaned = 0.000153899 Jy ! Total flux subtracted in 200 components = 0.000153899 Jy ! Clean residual min=-0.004649 max=0.004404 Jy/beam ! Clean residual mean=0.000016 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.150204 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 19 components and 0.150204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123838Jy sigma=0.000661 ! Fit after self-cal, rms=0.123881Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123881Jy sigma=0.000660 ! Fit after self-cal, rms=0.124278Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=8.053 mas, bpa=4.627 degrees ! Estimated noise=1848.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112422 Jy ! Component: 100 - total flux cleaned = 0.00016857 Jy ! Component: 150 - total flux cleaned = 0.000218855 Jy ! Component: 200 - total flux cleaned = 0.00021942 Jy ! Total flux subtracted in 200 components = 0.00021942 Jy ! Clean residual min=-0.004672 max=0.004327 Jy/beam ! Clean residual mean=0.000019 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.150423 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 22 components and 0.150423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124264Jy sigma=0.000660 ! Fit after self-cal, rms=0.124266Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.37645e-05 Jy ! Component: 100 - total flux cleaned = 1.28549e-05 Jy ! Component: 150 - total flux cleaned = -9.30955e-06 Jy ! Component: 200 - total flux cleaned = -4.87503e-05 Jy ! Total flux subtracted in 200 components = -4.87503e-05 Jy ! Clean residual min=-0.004699 max=0.004292 Jy/beam ! Clean residual mean=0.000019 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.150375 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 0.150375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124255Jy sigma=0.000660 ! Fit after self-cal, rms=0.124255Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124255Jy sigma=0.000660 ! Fit after self-cal, rms=0.124456Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=8.05 mas, bpa=4.63 degrees ! Estimated noise=1849.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167123 Jy ! Component: 100 - total flux cleaned = 0.000208884 Jy ! Component: 150 - total flux cleaned = 0.000209121 Jy ! Component: 200 - total flux cleaned = 0.000226679 Jy ! Total flux subtracted in 200 components = 0.000226679 Jy ! Clean residual min=-0.004714 max=0.004290 Jy/beam ! Clean residual mean=0.000020 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.150601 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.150601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124447Jy sigma=0.000660 ! Fit after self-cal, rms=0.124448Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.3124e-05 Jy ! Component: 100 - total flux cleaned = -2.26617e-05 Jy ! Component: 150 - total flux cleaned = -3.90002e-05 Jy ! Component: 200 - total flux cleaned = -4.04839e-05 Jy ! Total flux subtracted in 200 components = -4.04839e-05 Jy ! Clean residual min=-0.004729 max=0.004269 Jy/beam ! Clean residual mean=0.000019 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.150561 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.150561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124442Jy sigma=0.000660 ! Fit after self-cal, rms=0.124442Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124442Jy sigma=0.000660 ! Fit after self-cal, rms=0.124616Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.34 mas, bmaj=27.97 mas, bpa=9.789 degrees ! Estimated noise=2414.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510143 Jy ! Component: 100 - total flux cleaned = 0.000537024 Jy ! Component: 150 - total flux cleaned = 0.000550584 Jy ! Component: 200 - total flux cleaned = 0.000575062 Jy ! Total flux subtracted in 200 components = 0.000575062 Jy ! Clean residual min=-0.004265 max=0.003955 Jy/beam ! Clean residual mean=0.000043 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.151136 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 30 components and 0.151136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124610Jy sigma=0.000660 ! Fit after self-cal, rms=0.124613Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28968e-05 Jy ! Component: 100 - total flux cleaned = 2.46135e-05 Jy ! Component: 150 - total flux cleaned = 3.64923e-05 Jy ! Component: 200 - total flux cleaned = 5.82694e-05 Jy ! Total flux subtracted in 200 components = 5.82694e-05 Jy ! Clean residual min=-0.004259 max=0.003960 Jy/beam ! Clean residual mean=0.000044 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 0.151194 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 31 components and 0.151194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124611Jy sigma=0.000660 ! Fit after self-cal, rms=0.124612Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=8.047 mas, bpa=4.63 degrees ! Estimated noise=1851.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.948 x 8.047 at 4.63 degrees (North through East) ! Clean map min=-0.0045843 max=0.13105 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.391 mas, bmaj=7.001 mas, bpa=4.683 degrees ! Estimated noise=2994.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106046 Jy ! Component: 100 - total flux cleaned = 0.129414 Jy ! Component: 150 - total flux cleaned = 0.138036 Jy ! Component: 200 - total flux cleaned = 0.143121 Jy ! Total flux subtracted in 200 components = 0.143121 Jy ! Clean residual min=-0.006414 max=0.005956 Jy/beam ! Clean residual mean=-0.000018 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 0.143121 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.143121 Jy ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=8.047 mas, bpa=4.63 degrees ! Estimated noise=1851.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435327 Jy ! Component: 100 - total flux cleaned = 0.00636949 Jy ! Component: 150 - total flux cleaned = 0.00693451 Jy ! Component: 200 - total flux cleaned = 0.00704736 Jy ! Total flux subtracted in 200 components = 0.00704736 Jy ! Clean residual min=-0.004443 max=0.004458 Jy/beam ! Clean residual mean=0.000016 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.150169 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.150169 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.34 mas, bmaj=27.97 mas, bpa=9.789 degrees ! Estimated noise=2414.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473 Jy ! Component: 100 - total flux cleaned = 0.000475546 Jy ! Component: 150 - total flux cleaned = 0.000497864 Jy ! Component: 200 - total flux cleaned = 0.000538864 Jy ! Total flux subtracted in 200 components = 0.000538864 Jy ! Clean residual min=-0.004345 max=0.003938 Jy/beam ! Clean residual mean=0.000038 rms=0.001479 Jy/beam ! Combined flux in latest and established models = 0.150708 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.98247e-05 Jy ! Component: 100 - total flux cleaned = 5.77807e-05 Jy ! Component: 150 - total flux cleaned = 7.6403e-05 Jy ! Component: 200 - total flux cleaned = 0.000110605 Jy ! Total flux subtracted in 200 components = 0.000110605 Jy ! Clean residual min=-0.004315 max=0.003921 Jy/beam ! Clean residual mean=0.000040 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.150818 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.150818 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=8.047 mas, bpa=4.63 degrees ! Estimated noise=1851.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290895 Jy ! Component: 100 - total flux cleaned = -0.000325194 Jy ! Component: 150 - total flux cleaned = -0.000324828 Jy ! Component: 200 - total flux cleaned = -0.000324944 Jy ! Total flux subtracted in 200 components = -0.000324944 Jy ! Clean residual min=-0.004476 max=0.004308 Jy/beam ! Clean residual mean=0.000018 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.150493 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.150493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124648Jy sigma=0.000660 ! Fit after self-cal, rms=0.124630Jy sigma=0.000660 wmodel J0151-3435_S_2017_05_31_pus_map.mod ! Writing 37 model components to file: J0151-3435_S_2017_05_31_pus_map.mod wobs J0151-3435_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0151-3435_S_2017_05_31_pus_uvs.fits wwins J0151-3435_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J0151-3435_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.97885e-05 Jy ! Component: 100 - total flux cleaned = -2.4064e-05 Jy ! Component: 150 - total flux cleaned = -0.000154979 Jy ! Component: 200 - total flux cleaned = -0.00034038 Jy ! Component: 250 - total flux cleaned = -0.000282017 Jy ! Component: 300 - total flux cleaned = -0.000280591 Jy ! Component: 350 - total flux cleaned = -0.000280571 Jy ! Component: 400 - total flux cleaned = -0.000383339 Jy ! Component: 450 - total flux cleaned = -0.000140567 Jy ! Component: 500 - total flux cleaned = 4.76055e-05 Jy ! Component: 550 - total flux cleaned = 0.000277797 Jy ! Component: 600 - total flux cleaned = 0.000546323 Jy ! Component: 650 - total flux cleaned = 0.000808422 Jy ! Component: 700 - total flux cleaned = 0.00118927 Jy ! Component: 750 - total flux cleaned = 0.00131216 Jy ! Component: 800 - total flux cleaned = 0.00131252 Jy ! Component: 850 - total flux cleaned = 0.00142985 Jy ! Component: 900 - total flux cleaned = 0.00139155 Jy ! Component: 950 - total flux cleaned = 0.00142901 Jy ! Component: 1000 - total flux cleaned = 0.00139257 Jy ! Component: 1050 - total flux cleaned = 0.0012138 Jy ! Component: 1100 - total flux cleaned = 0.00121443 Jy ! Component: 1150 - total flux cleaned = 0.00104116 Jy ! Component: 1200 - total flux cleaned = 0.000973465 Jy ! Component: 1250 - total flux cleaned = 0.000873991 Jy ! Component: 1300 - total flux cleaned = 0.000873987 Jy ! Component: 1350 - total flux cleaned = 0.000841137 Jy ! Component: 1400 - total flux cleaned = 0.000682391 Jy ! Component: 1450 - total flux cleaned = 0.00068264 Jy ! Component: 1500 - total flux cleaned = 0.000589842 Jy ! Component: 1550 - total flux cleaned = 0.000529219 Jy ! Component: 1600 - total flux cleaned = 0.000499327 Jy ! Component: 1650 - total flux cleaned = 0.000410573 Jy ! Component: 1700 - total flux cleaned = 0.000294313 Jy ! Component: 1750 - total flux cleaned = 0.000265495 Jy ! Component: 1800 - total flux cleaned = 0.000208813 Jy ! Component: 1850 - total flux cleaned = 9.65707e-05 Jy ! Component: 1900 - total flux cleaned = 1.39341e-05 Jy ! Component: 1950 - total flux cleaned = -6.79842e-05 Jy ! Component: 2000 - total flux cleaned = -0.00017636 Jy ! Component: 2050 - total flux cleaned = -0.000256446 Jy ! Component: 2100 - total flux cleaned = -0.000415341 Jy ! Component: 2150 - total flux cleaned = -0.000520098 Jy ! Component: 2200 - total flux cleaned = -0.000752974 Jy ! Component: 2250 - total flux cleaned = -0.000932028 Jy ! Component: 2300 - total flux cleaned = -0.001084 Jy ! Component: 2350 - total flux cleaned = -0.00123467 Jy ! Component: 2400 - total flux cleaned = -0.00133436 Jy ! Component: 2450 - total flux cleaned = -0.00148231 Jy ! Component: 2500 - total flux cleaned = -0.00155569 Jy ! Component: 2550 - total flux cleaned = -0.00174952 Jy ! Component: 2600 - total flux cleaned = -0.00182153 Jy ! Component: 2650 - total flux cleaned = -0.00194105 Jy ! Component: 2700 - total flux cleaned = -0.00201235 Jy ! Component: 2750 - total flux cleaned = -0.00203597 Jy ! Component: 2800 - total flux cleaned = -0.00210658 Jy ! Component: 2850 - total flux cleaned = -0.00210646 Jy ! Component: 2900 - total flux cleaned = -0.00213005 Jy ! Component: 2950 - total flux cleaned = -0.00217737 Jy ! Component: 3000 - total flux cleaned = -0.00220128 Jy ! Component: 3050 - total flux cleaned = -0.00224918 Jy ! Component: 3100 - total flux cleaned = -0.00227365 Jy ! Component: 3150 - total flux cleaned = -0.00232237 Jy ! Component: 3200 - total flux cleaned = -0.00229766 Jy ! Component: 3250 - total flux cleaned = -0.00229764 Jy ! Component: 3300 - total flux cleaned = -0.00224717 Jy ! Component: 3350 - total flux cleaned = -0.00222134 Jy ! Component: 3400 - total flux cleaned = -0.00222139 Jy ! Component: 3450 - total flux cleaned = -0.00216912 Jy ! Component: 3500 - total flux cleaned = -0.00214249 Jy ! Component: 3550 - total flux cleaned = -0.00211533 Jy ! Component: 3600 - total flux cleaned = -0.00211547 Jy ! Component: 3650 - total flux cleaned = -0.00208759 Jy ! Component: 3700 - total flux cleaned = -0.00202996 Jy ! Component: 3750 - total flux cleaned = -0.0020591 Jy ! Component: 3800 - total flux cleaned = -0.00205957 Jy ! Component: 3850 - total flux cleaned = -0.00202923 Jy ! Component: 3900 - total flux cleaned = -0.00206095 Jy ! Component: 3950 - total flux cleaned = -0.00206053 Jy ! Component: 4000 - total flux cleaned = -0.00206017 Jy ! Component: 4050 - total flux cleaned = -0.00212813 Jy ! Total flux subtracted in 4096 components = -0.00216341 Jy ! Clean residual min=-0.002147 max=0.001986 Jy/beam ! Clean residual mean=0.000003 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.14833 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 258 components and 0.14833 Jy ![Exited script file: muppet] wmap "J0151-3435_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.948 x 8.047 at 4.63 degrees (North through East) ! Clean map min=-0.0057758 max=0.13293 Jy/beam ! Writing clean map to FITS file: J0151-3435_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132925 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000537957 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21412 1.21412 2.42823 4.85647 9.71294 19.4259 38.8518 77.7035 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.948 x 8.047 at 4.63 degrees (North through East) ! Clean map min=-0.0057758 max=0.13293 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0151-3435_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:33:39 2019