! Started logfile: J0151-1719_S_2017_05_27_pus_uvs.log on Fri May 3 10:54:49 2019 obs J0151-1719_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0151-1719_S_2017_05_27_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977778 visibilities/baseline/integration-bin. ! Found source: J0151-1719 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 16896 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0151-1719_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 494 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.829957Jy sigma=0.024891 ! Fit after self-cal, rms=0.792064Jy sigma=0.024795 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=7.46 mas, bpa=-8.275 degrees ! Estimated noise=840.601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0949051 Jy ! Component: 100 - total flux cleaned = 0.105019 Jy ! Total flux subtracted in 100 components = 0.105019 Jy ! Clean residual min=-0.030739 max=0.060194 Jy/beam ! Clean residual mean=0.000020 rms=0.011825 Jy/beam ! Combined flux in latest and established models = 0.105019 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.105019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159844Jy sigma=0.002586 ! Fit after self-cal, rms=0.159786Jy sigma=0.002584 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=7.868 mas, bpa=-6.559 degrees ! Estimated noise=680.735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-38.5, 52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0598289 Jy ! Component: 100 - total flux cleaned = 0.0909644 Jy ! Component: 150 - total flux cleaned = 0.108458 Jy ! Component: 200 - total flux cleaned = 0.115138 Jy ! Total flux subtracted in 200 components = 0.115138 Jy ! Clean residual min=-0.021722 max=0.042062 Jy/beam ! Clean residual mean=-0.000077 rms=0.006672 Jy/beam ! Combined flux in latest and established models = 0.220157 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 48 components and 0.220157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126812Jy sigma=0.002558 ! Fit after self-cal, rms=0.122847Jy sigma=0.002545 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 20.37 FD 0.79 HN 0.97 KP 0.91 ! LA 0.91 MK 1.07 NL 0.85 OV 0.91 ! PT 0.97 SC 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 1.02 KP 0.89 ! LA 0.89 MK 1.06 NL 0.98 OV 0.93 ! PT 0.97 SC 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 1.03 KP 0.87 ! LA 0.92 MK 1.07 NL 0.95 OV 0.85 ! PT 0.98 SC 0.81 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.98 KP 1.00* ! LA 0.80 MK 1.20 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.122847Jy sigma=0.002545 ! Fit after self-cal, rms=1.495772Jy sigma=0.000748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=8.071 mas, bpa=-4.659 degrees ! Estimated noise=782.877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00293573 Jy ! Component: 100 - total flux cleaned = -0.0025856 Jy ! Component: 150 - total flux cleaned = -0.00257967 Jy ! Component: 200 - total flux cleaned = -0.00189843 Jy ! Total flux subtracted in 200 components = -0.00189843 Jy ! Clean residual min=-0.009498 max=0.006793 Jy/beam ! Clean residual mean=0.000008 rms=0.001717 Jy/beam ! Combined flux in latest and established models = 0.218258 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.218258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.492239Jy sigma=0.000736 ! Fit after self-cal, rms=1.492143Jy sigma=0.000716 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.492143Jy sigma=0.000716 ! Fit after self-cal, rms=1.786936Jy sigma=0.000710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=8.131 mas, bpa=-4.902 degrees ! Estimated noise=792.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000698028 Jy ! Component: 100 - total flux cleaned = 0.000977036 Jy ! Component: 150 - total flux cleaned = 0.000987364 Jy ! Component: 200 - total flux cleaned = 0.00117092 Jy ! Total flux subtracted in 200 components = 0.00117092 Jy ! Clean residual min=-0.006998 max=0.005371 Jy/beam ! Clean residual mean=0.000015 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 0.219429 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 84 components and 0.219429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.784515Jy sigma=0.000708 ! Fit after self-cal, rms=1.784440Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234235 Jy ! Component: 100 - total flux cleaned = -0.00251485 Jy ! Component: 150 - total flux cleaned = -0.00268111 Jy ! Component: 200 - total flux cleaned = -0.00282957 Jy ! Total flux subtracted in 200 components = -0.00282957 Jy ! Clean residual min=-0.006078 max=0.005033 Jy/beam ! Clean residual mean=0.000017 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.2166 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 101 components and 0.2166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.782918Jy sigma=0.000705 ! Fit after self-cal, rms=1.782879Jy sigma=0.000704 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.782879Jy sigma=0.000704 ! Fit after self-cal, rms=1.644834Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=8.135 mas, bpa=-5.211 degrees ! Estimated noise=798.143 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117531 Jy ! Component: 100 - total flux cleaned = -0.000845128 Jy ! Component: 150 - total flux cleaned = -0.000417884 Jy ! Component: 200 - total flux cleaned = -4.36047e-05 Jy ! Total flux subtracted in 200 components = -4.36047e-05 Jy ! Clean residual min=-0.005402 max=0.004053 Jy/beam ! Clean residual mean=0.000004 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.216556 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 118 components and 0.216556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.643266Jy sigma=0.000693 ! Fit after self-cal, rms=1.643242Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211163 Jy ! Component: 100 - total flux cleaned = -0.00198491 Jy ! Component: 150 - total flux cleaned = -0.00175365 Jy ! Component: 200 - total flux cleaned = -0.00165348 Jy ! Total flux subtracted in 200 components = -0.00165348 Jy ! Clean residual min=-0.004501 max=0.003807 Jy/beam ! Clean residual mean=0.000007 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.214903 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 133 components and 0.214903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.642241Jy sigma=0.000692 ! Fit after self-cal, rms=1.642228Jy sigma=0.000692 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.642228Jy sigma=0.000692 ! Fit after self-cal, rms=1.835397Jy sigma=0.000691 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.433 mas, bmaj=16.73 mas, bpa=-4.266 degrees ! Estimated noise=1017.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360831 Jy ! Component: 100 - total flux cleaned = 0.000724969 Jy ! Component: 150 - total flux cleaned = 0.00129051 Jy ! Component: 200 - total flux cleaned = 0.0017776 Jy ! Total flux subtracted in 200 components = 0.0017776 Jy ! Clean residual min=-0.007803 max=0.005651 Jy/beam ! Clean residual mean=0.000013 rms=0.001666 Jy/beam ! Combined flux in latest and established models = 0.21668 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 147 components and 0.21668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.833618Jy sigma=0.000693 ! Fit after self-cal, rms=1.833615Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199437 Jy ! Component: 100 - total flux cleaned = -0.00212186 Jy ! Component: 150 - total flux cleaned = -0.00181777 Jy ! Component: 200 - total flux cleaned = -0.00144751 Jy ! Total flux subtracted in 200 components = -0.00144751 Jy ! Clean residual min=-0.006454 max=0.005578 Jy/beam ! Clean residual mean=0.000019 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.215233 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 164 components and 0.215233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.832653Jy sigma=0.000694 ! Fit after self-cal, rms=1.832656Jy sigma=0.000693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.156 mas, bpa=-5.373 degrees ! Estimated noise=807.329 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 8.156 at -5.373 degrees (North through East) ! Clean map min=-0.0056115 max=0.18541 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.624 mas, bmaj=7.21 mas, bpa=-7.193 degrees ! Estimated noise=1297.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147073 Jy ! Component: 100 - total flux cleaned = 0.184558 Jy ! Component: 150 - total flux cleaned = 0.200773 Jy ! Component: 200 - total flux cleaned = 0.207449 Jy ! Total flux subtracted in 200 components = 0.207449 Jy ! Clean residual min=-0.006632 max=0.005804 Jy/beam ! Clean residual mean=-0.000014 rms=0.001683 Jy/beam ! Combined flux in latest and established models = 0.207449 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.207449 Jy ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.156 mas, bpa=-5.373 degrees ! Estimated noise=807.329 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282485 Jy ! Component: 100 - total flux cleaned = 0.00296792 Jy ! Component: 150 - total flux cleaned = 0.00309861 Jy ! Component: 200 - total flux cleaned = 0.00321008 Jy ! Total flux subtracted in 200 components = 0.00321008 Jy ! Clean residual min=-0.004400 max=0.004035 Jy/beam ! Clean residual mean=0.000001 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.210659 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 49 components and 0.210659 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.433 mas, bmaj=16.73 mas, bpa=-4.266 degrees ! Estimated noise=1017.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000552585 Jy ! Component: 100 - total flux cleaned = -0.000550015 Jy ! Component: 150 - total flux cleaned = -0.000547694 Jy ! Component: 200 - total flux cleaned = -0.00054817 Jy ! Total flux subtracted in 200 components = -0.00054817 Jy ! Clean residual min=-0.006090 max=0.005336 Jy/beam ! Clean residual mean=0.000009 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.210111 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.29647e-06 Jy ! Component: 100 - total flux cleaned = -0.000103738 Jy ! Component: 150 - total flux cleaned = -0.000101497 Jy ! Component: 200 - total flux cleaned = -7.98166e-06 Jy ! Total flux subtracted in 200 components = -7.98166e-06 Jy ! Clean residual min=-0.006402 max=0.005596 Jy/beam ! Clean residual mean=0.000013 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.210103 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 87 components and 0.210103 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.156 mas, bpa=-5.373 degrees ! Estimated noise=807.329 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012191 Jy ! Component: 100 - total flux cleaned = -0.000940642 Jy ! Component: 150 - total flux cleaned = -0.0006075 Jy ! Component: 200 - total flux cleaned = -0.000376169 Jy ! Total flux subtracted in 200 components = -0.000376169 Jy ! Clean residual min=-0.004617 max=0.004829 Jy/beam ! Clean residual mean=0.000006 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.209726 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 109 components and 0.209726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.830249Jy sigma=0.000694 ! Fit after self-cal, rms=1.830230Jy sigma=0.000693 wmodel J0151-1719_S_2017_05_27_pus_map.mod ! Writing 109 model components to file: J0151-1719_S_2017_05_27_pus_map.mod wobs J0151-1719_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0151-1719_S_2017_05_27_pus_uvs.fits wwins J0151-1719_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J0151-1719_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282676 Jy ! Component: 100 - total flux cleaned = -0.00101699 Jy ! Component: 150 - total flux cleaned = -0.00164848 Jy ! Component: 200 - total flux cleaned = -0.00212178 Jy ! Component: 250 - total flux cleaned = -0.00238515 Jy ! Component: 300 - total flux cleaned = -0.00270633 Jy ! Component: 350 - total flux cleaned = -0.00283117 Jy ! Component: 400 - total flux cleaned = -0.00313964 Jy ! Component: 450 - total flux cleaned = -0.00332105 Jy ! Component: 500 - total flux cleaned = -0.00355868 Jy ! Component: 550 - total flux cleaned = -0.00379186 Jy ! Component: 600 - total flux cleaned = -0.00396366 Jy ! Component: 650 - total flux cleaned = -0.00407652 Jy ! Component: 700 - total flux cleaned = -0.00413227 Jy ! Component: 750 - total flux cleaned = -0.00435279 Jy ! Component: 800 - total flux cleaned = -0.00435227 Jy ! Component: 850 - total flux cleaned = -0.00440571 Jy ! Component: 900 - total flux cleaned = -0.0044061 Jy ! Component: 950 - total flux cleaned = -0.00445884 Jy ! Component: 1000 - total flux cleaned = -0.00445871 Jy ! Component: 1050 - total flux cleaned = -0.0045102 Jy ! Component: 1100 - total flux cleaned = -0.00445844 Jy ! Component: 1150 - total flux cleaned = -0.00435644 Jy ! Component: 1200 - total flux cleaned = -0.0043567 Jy ! Component: 1250 - total flux cleaned = -0.00435676 Jy ! Component: 1300 - total flux cleaned = -0.00440733 Jy ! Component: 1350 - total flux cleaned = -0.00445715 Jy ! Component: 1400 - total flux cleaned = -0.00435836 Jy ! Component: 1450 - total flux cleaned = -0.00445716 Jy ! Component: 1500 - total flux cleaned = -0.00450612 Jy ! Component: 1550 - total flux cleaned = -0.00450594 Jy ! Component: 1600 - total flux cleaned = -0.0044093 Jy ! Component: 1650 - total flux cleaned = -0.00445749 Jy ! Component: 1700 - total flux cleaned = -0.00445783 Jy ! Component: 1750 - total flux cleaned = -0.00455318 Jy ! Component: 1800 - total flux cleaned = -0.00445864 Jy ! Component: 1850 - total flux cleaned = -0.00455284 Jy ! Component: 1900 - total flux cleaned = -0.0045059 Jy ! Component: 1950 - total flux cleaned = -0.00445918 Jy ! Component: 2000 - total flux cleaned = -0.00445943 Jy ! Component: 2050 - total flux cleaned = -0.00450551 Jy ! Component: 2100 - total flux cleaned = -0.00450542 Jy ! Component: 2150 - total flux cleaned = -0.00446013 Jy ! Component: 2200 - total flux cleaned = -0.00441455 Jy ! Component: 2250 - total flux cleaned = -0.0044145 Jy ! Component: 2300 - total flux cleaned = -0.00445957 Jy ! Component: 2350 - total flux cleaned = -0.00445944 Jy ! Component: 2400 - total flux cleaned = -0.00445935 Jy ! Component: 2450 - total flux cleaned = -0.00441502 Jy ! Component: 2500 - total flux cleaned = -0.00441485 Jy ! Component: 2550 - total flux cleaned = -0.00441496 Jy ! Component: 2600 - total flux cleaned = -0.00441511 Jy ! Component: 2650 - total flux cleaned = -0.00441512 Jy ! Component: 2700 - total flux cleaned = -0.00437146 Jy ! Component: 2750 - total flux cleaned = -0.00441509 Jy ! Component: 2800 - total flux cleaned = -0.0044587 Jy ! Component: 2850 - total flux cleaned = -0.00454515 Jy ! Component: 2900 - total flux cleaned = -0.00454521 Jy ! Component: 2950 - total flux cleaned = -0.00463107 Jy ! Component: 3000 - total flux cleaned = -0.00458843 Jy ! Component: 3050 - total flux cleaned = -0.00471633 Jy ! Component: 3100 - total flux cleaned = -0.00467361 Jy ! Component: 3150 - total flux cleaned = -0.00471599 Jy ! Component: 3200 - total flux cleaned = -0.00475814 Jy ! Component: 3250 - total flux cleaned = -0.00475847 Jy ! Component: 3300 - total flux cleaned = -0.00484249 Jy ! Component: 3350 - total flux cleaned = -0.00480067 Jy ! Component: 3400 - total flux cleaned = -0.00488414 Jy ! Component: 3450 - total flux cleaned = -0.00488412 Jy ! Component: 3500 - total flux cleaned = -0.00488425 Jy ! Component: 3550 - total flux cleaned = -0.00496677 Jy ! Component: 3600 - total flux cleaned = -0.00504889 Jy ! Component: 3650 - total flux cleaned = -0.00504893 Jy ! Component: 3700 - total flux cleaned = -0.00508981 Jy ! Component: 3750 - total flux cleaned = -0.00508986 Jy ! Component: 3800 - total flux cleaned = -0.00513022 Jy ! Component: 3850 - total flux cleaned = -0.00521114 Jy ! Component: 3900 - total flux cleaned = -0.00533196 Jy ! Component: 3950 - total flux cleaned = -0.00529186 Jy ! Component: 4000 - total flux cleaned = -0.00537194 Jy ! Component: 4050 - total flux cleaned = -0.005412 Jy ! Total flux subtracted in 4096 components = -0.00533246 Jy ! Clean residual min=-0.002411 max=0.002048 Jy/beam ! Clean residual mean=0.000002 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.204394 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 351 components and 0.204394 Jy ![Exited script file: muppet] wmap "J0151-1719_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 8.156 at -5.373 degrees (North through East) ! Clean map min=-0.0081625 max=0.19538 Jy/beam ! Writing clean map to FITS file: J0151-1719_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.19538 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000755898 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.16066 1.16066 2.32132 4.64264 9.28528 18.5706 37.1411 74.2823 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.195 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 8.156 at -5.373 degrees (North through East) ! Clean map min=-0.0081625 max=0.19538 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0151-1719_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:54:53 2019