! Started logfile: J0150-0725_S_2017_08_05_pus_uvs.log on Thu May 9 19:16:39 2019 obs J0150-0725_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0150-0725_S_2017_08_05_pus_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.938963 visibilities/baseline/integration-bin. ! Found source: J0150-0725 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 25352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0150-0725_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 971 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.947187Jy sigma=0.007652 ! Fit after self-cal, rms=0.925850Jy sigma=0.007499 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=6.998 mas, bpa=-4.724 degrees ! Estimated noise=980.264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0530254 Jy ! Component: 100 - total flux cleaned = 0.0704572 Jy ! Total flux subtracted in 100 components = 0.0704572 Jy ! Clean residual min=-0.006699 max=0.021231 Jy/beam ! Clean residual mean=0.000019 rms=0.002218 Jy/beam ! Combined flux in latest and established models = 0.0704572 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0704572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101869Jy sigma=0.000768 ! Fit after self-cal, rms=0.101585Jy sigma=0.000766 ! Inverting map ! Added new window around map position (-9, -10). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179551 Jy ! Component: 100 - total flux cleaned = 0.0276645 Jy ! Total flux subtracted in 100 components = 0.0276645 Jy ! Clean residual min=-0.005647 max=0.009292 Jy/beam ! Clean residual mean=0.000014 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.0981217 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.0981217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097069Jy sigma=0.000727 ! Fit after self-cal, rms=0.096167Jy sigma=0.000719 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123228 Jy ! Component: 100 - total flux cleaned = 0.0190267 Jy ! Total flux subtracted in 100 components = 0.0190267 Jy ! Clean residual min=-0.004831 max=0.006492 Jy/beam ! Clean residual mean=0.000010 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.117148 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.117148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093808Jy sigma=0.000700 ! Fit after self-cal, rms=0.093496Jy sigma=0.000697 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00743442 Jy ! Component: 100 - total flux cleaned = 0.0118848 Jy ! Total flux subtracted in 100 components = 0.0118848 Jy ! Clean residual min=-0.004388 max=0.005346 Jy/beam ! Clean residual mean=0.000007 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.129033 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.129033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092480Jy sigma=0.000689 ! Fit after self-cal, rms=0.092367Jy sigma=0.000688 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=8.035 mas, bpa=-4.861 degrees ! Estimated noise=670.287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00770146 Jy ! Component: 100 - total flux cleaned = 0.0122198 Jy ! Component: 150 - total flux cleaned = 0.0152565 Jy ! Component: 200 - total flux cleaned = 0.0167065 Jy ! Total flux subtracted in 200 components = 0.0167065 Jy ! Clean residual min=-0.003336 max=0.003974 Jy/beam ! Clean residual mean=0.000003 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.14574 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 81 components and 0.14574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091577Jy sigma=0.000683 ! Fit after self-cal, rms=0.091518Jy sigma=0.000682 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 0.91 HN 1.09 KP 1.00 ! LA 1.01 MK 0.96 NL 0.95 OV 1.02 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.21 KP 0.99 ! LA 0.95 MK 1.02 NL 1.07 OV 1.03 ! PT 1.00 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.03 HN 1.10 KP 0.87 ! LA 0.76 MK 1.01 NL 1.20 OV 1.07 ! PT 0.94 SC 1.07 ! ! ! Correcting IF 4. ! A total of 153 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.86 KP 1.00* ! LA 1.00* MK 1.07 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.091518Jy sigma=0.000682 ! Fit after self-cal, rms=0.093320Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=8.149 mas, bpa=-4.997 degrees ! Estimated noise=690.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106966 Jy ! Component: 100 - total flux cleaned = 0.00135821 Jy ! Component: 150 - total flux cleaned = 0.00160068 Jy ! Component: 200 - total flux cleaned = 0.00165403 Jy ! Total flux subtracted in 200 components = 0.00165403 Jy ! Clean residual min=-0.002659 max=0.003205 Jy/beam ! Clean residual mean=-0.000000 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.147394 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 88 components and 0.147394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093200Jy sigma=0.000674 ! Fit after self-cal, rms=0.093188Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093188Jy sigma=0.000674 ! Fit after self-cal, rms=0.093741Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=8.08 mas, bpa=-4.997 degrees ! Estimated noise=684.456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180531 Jy ! Component: 100 - total flux cleaned = 0.00048219 Jy ! Component: 150 - total flux cleaned = 0.000608824 Jy ! Component: 200 - total flux cleaned = 0.000682702 Jy ! Total flux subtracted in 200 components = 0.000682702 Jy ! Clean residual min=-0.002124 max=0.002505 Jy/beam ! Clean residual mean=-0.000002 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.148077 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 90 components and 0.148077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093686Jy sigma=0.000670 ! Fit after self-cal, rms=0.093770Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-121, 116.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156823 Jy ! Component: 100 - total flux cleaned = 0.00146281 Jy ! Component: 150 - total flux cleaned = 0.00159049 Jy ! Component: 200 - total flux cleaned = 0.00166655 Jy ! Total flux subtracted in 200 components = 0.00166655 Jy ! Clean residual min=-0.002061 max=0.002266 Jy/beam ! Clean residual mean=-0.000001 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.149743 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 106 components and 0.149743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093694Jy sigma=0.000669 ! Fit after self-cal, rms=0.093675Jy sigma=0.000669 ! Inverting map ! Added new window around map position (14, 80). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170709 Jy ! Component: 100 - total flux cleaned = 0.00148884 Jy ! Component: 150 - total flux cleaned = 0.00137261 Jy ! Component: 200 - total flux cleaned = 0.00133623 Jy ! Total flux subtracted in 200 components = 0.00133623 Jy ! Clean residual min=-0.002001 max=0.001932 Jy/beam ! Clean residual mean=-0.000001 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.151079 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 0.151079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093619Jy sigma=0.000669 ! Fit after self-cal, rms=0.093617Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093617Jy sigma=0.000669 ! Fit after self-cal, rms=0.093473Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=8.039 mas, bpa=-5.027 degrees ! Estimated noise=679.022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543402 Jy ! Component: 100 - total flux cleaned = 0.000506733 Jy ! Component: 150 - total flux cleaned = 0.000472952 Jy ! Component: 200 - total flux cleaned = 0.000440361 Jy ! Total flux subtracted in 200 components = 0.000440361 Jy ! Clean residual min=-0.001979 max=0.001886 Jy/beam ! Clean residual mean=-0.000001 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.15152 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 133 components and 0.15152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093443Jy sigma=0.000668 ! Fit after self-cal, rms=0.093455Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119068 Jy ! Component: 100 - total flux cleaned = 5.56798e-05 Jy ! Component: 150 - total flux cleaned = -3.21005e-06 Jy ! Component: 200 - total flux cleaned = -3.11451e-05 Jy ! Total flux subtracted in 200 components = -3.11451e-05 Jy ! Clean residual min=-0.001941 max=0.001817 Jy/beam ! Clean residual mean=-0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.151488 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 139 components and 0.151488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093436Jy sigma=0.000668 ! Fit after self-cal, rms=0.093437Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093437Jy sigma=0.000668 ! Fit after self-cal, rms=0.093483Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.509 mas, bmaj=14.16 mas, bpa=-2.324 degrees ! Estimated noise=872.944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000948468 Jy ! Component: 100 - total flux cleaned = 0.00111924 Jy ! Component: 150 - total flux cleaned = 0.00118532 Jy ! Component: 200 - total flux cleaned = 0.00120535 Jy ! Total flux subtracted in 200 components = 0.00120535 Jy ! Clean residual min=-0.001909 max=0.002018 Jy/beam ! Clean residual mean=-0.000001 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.152694 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 148 components and 0.152694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093477Jy sigma=0.000668 ! Fit after self-cal, rms=0.093483Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118435 Jy ! Component: 100 - total flux cleaned = 0.00013612 Jy ! Component: 150 - total flux cleaned = 0.000152264 Jy ! Component: 200 - total flux cleaned = 0.000136461 Jy ! Total flux subtracted in 200 components = 0.000136461 Jy ! Clean residual min=-0.001901 max=0.002013 Jy/beam ! Clean residual mean=-0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.15283 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 159 components and 0.15283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093480Jy sigma=0.000668 ! Fit after self-cal, rms=0.093477Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.022 mas, bpa=-5.023 degrees ! Estimated noise=677.213 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.17 x 8.022 at -5.023 degrees (North through East) ! Clean map min=-0.0020124 max=0.066338 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.62 mas, bmaj=6.999 mas, bpa=-5.115 degrees ! Estimated noise=1018.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557724 Jy ! Component: 100 - total flux cleaned = 0.0849544 Jy ! Component: 150 - total flux cleaned = 0.102788 Jy ! Component: 200 - total flux cleaned = 0.11471 Jy ! Total flux subtracted in 200 components = 0.11471 Jy ! Clean residual min=-0.004548 max=0.007204 Jy/beam ! Clean residual mean=0.000004 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.11471 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.11471 Jy ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.022 mas, bpa=-5.023 degrees ! Estimated noise=677.213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122527 Jy ! Component: 100 - total flux cleaned = 0.0198023 Jy ! Component: 150 - total flux cleaned = 0.0249131 Jy ! Component: 200 - total flux cleaned = 0.028752 Jy ! Total flux subtracted in 200 components = 0.028752 Jy ! Clean residual min=-0.002482 max=0.003518 Jy/beam ! Clean residual mean=-0.000002 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.143462 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 73 components and 0.143462 Jy ! Inverting map ! Added new window around map position (-4, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333699 Jy ! Component: 100 - total flux cleaned = 0.00502397 Jy ! Component: 150 - total flux cleaned = 0.00603764 Jy ! Component: 200 - total flux cleaned = 0.00703233 Jy ! Total flux subtracted in 200 components = 0.00703233 Jy ! Clean residual min=-0.001963 max=0.001729 Jy/beam ! Clean residual mean=-0.000001 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.150495 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 111 components and 0.150495 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.509 mas, bmaj=14.16 mas, bpa=-2.324 degrees ! Estimated noise=872.944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189104 Jy ! Component: 100 - total flux cleaned = 0.00261611 Jy ! Component: 150 - total flux cleaned = 0.0030166 Jy ! Component: 200 - total flux cleaned = 0.00325194 Jy ! Total flux subtracted in 200 components = 0.00325194 Jy ! Clean residual min=-0.001908 max=0.001920 Jy/beam ! Clean residual mean=-0.000000 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.153747 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102206 Jy ! Component: 100 - total flux cleaned = 0.00014899 Jy ! Component: 150 - total flux cleaned = 0.000193689 Jy ! Component: 200 - total flux cleaned = 0.000234477 Jy ! Total flux subtracted in 200 components = 0.000234477 Jy ! Clean residual min=-0.001885 max=0.001937 Jy/beam ! Clean residual mean=-0.000000 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.153981 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 157 components and 0.153981 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.022 mas, bpa=-5.023 degrees ! Estimated noise=677.213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.07428e-05 Jy ! Component: 100 - total flux cleaned = 9.55587e-05 Jy ! Component: 150 - total flux cleaned = 0.000190446 Jy ! Component: 200 - total flux cleaned = 0.000160384 Jy ! Total flux subtracted in 200 components = 0.000160384 Jy ! Clean residual min=-0.001745 max=0.001693 Jy/beam ! Clean residual mean=-0.000000 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.154142 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 175 components and 0.154142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093431Jy sigma=0.000668 ! Fit after self-cal, rms=0.093402Jy sigma=0.000668 wmodel J0150-0725_S_2017_08_05_pus_map.mod ! Writing 175 model components to file: J0150-0725_S_2017_08_05_pus_map.mod wobs J0150-0725_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0150-0725_S_2017_08_05_pus_uvs.fits wwins J0150-0725_S_2017_08_05_pus_map.win ! wwins: Wrote 6 windows to J0150-0725_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165016 Jy ! Component: 100 - total flux cleaned = -0.00031478 Jy ! Component: 150 - total flux cleaned = -0.000428863 Jy ! Component: 200 - total flux cleaned = -0.000483223 Jy ! Component: 250 - total flux cleaned = -0.000535802 Jy ! Component: 300 - total flux cleaned = -0.000662425 Jy ! Component: 350 - total flux cleaned = -0.000760432 Jy ! Component: 400 - total flux cleaned = -0.000879288 Jy ! Component: 450 - total flux cleaned = -0.00101779 Jy ! Component: 500 - total flux cleaned = -0.00119741 Jy ! Component: 550 - total flux cleaned = -0.00141551 Jy ! Component: 600 - total flux cleaned = -0.00156456 Jy ! Component: 650 - total flux cleaned = -0.00173081 Jy ! Component: 700 - total flux cleaned = -0.00183234 Jy ! Component: 750 - total flux cleaned = -0.00195166 Jy ! Component: 800 - total flux cleaned = -0.00210704 Jy ! Component: 850 - total flux cleaned = -0.00225908 Jy ! Component: 900 - total flux cleaned = -0.0023337 Jy ! Component: 950 - total flux cleaned = -0.00246199 Jy ! Component: 1000 - total flux cleaned = -0.00260603 Jy ! Component: 1050 - total flux cleaned = -0.00274731 Jy ! Component: 1100 - total flux cleaned = -0.00278199 Jy ! Component: 1150 - total flux cleaned = -0.00285029 Jy ! Component: 1200 - total flux cleaned = -0.00293412 Jy ! Component: 1250 - total flux cleaned = -0.00295049 Jy ! Component: 1300 - total flux cleaned = -0.00304867 Jy ! Component: 1350 - total flux cleaned = -0.00316104 Jy ! Component: 1400 - total flux cleaned = -0.00323985 Jy ! Component: 1450 - total flux cleaned = -0.00328632 Jy ! Component: 1500 - total flux cleaned = -0.00339368 Jy ! Component: 1550 - total flux cleaned = -0.00342345 Jy ! Component: 1600 - total flux cleaned = -0.00348334 Jy ! Component: 1650 - total flux cleaned = -0.00346864 Jy ! Component: 1700 - total flux cleaned = -0.00351225 Jy ! Component: 1750 - total flux cleaned = -0.0034979 Jy ! Component: 1800 - total flux cleaned = -0.00351229 Jy ! Component: 1850 - total flux cleaned = -0.00354032 Jy ! Component: 1900 - total flux cleaned = -0.0035126 Jy ! Component: 1950 - total flux cleaned = -0.00356755 Jy ! Component: 2000 - total flux cleaned = -0.00358092 Jy ! Component: 2050 - total flux cleaned = -0.0035674 Jy ! Component: 2100 - total flux cleaned = -0.00356748 Jy ! Component: 2150 - total flux cleaned = -0.00358059 Jy ! Component: 2200 - total flux cleaned = -0.0035804 Jy ! Component: 2250 - total flux cleaned = -0.00359329 Jy ! Component: 2300 - total flux cleaned = -0.00364421 Jy ! Component: 2350 - total flux cleaned = -0.00371943 Jy ! Component: 2400 - total flux cleaned = -0.00378153 Jy ! Component: 2450 - total flux cleaned = -0.00379381 Jy ! Component: 2500 - total flux cleaned = -0.00381809 Jy ! Component: 2550 - total flux cleaned = -0.0038904 Jy ! Component: 2600 - total flux cleaned = -0.00391431 Jy ! Component: 2650 - total flux cleaned = -0.00393803 Jy ! Component: 2700 - total flux cleaned = -0.00403182 Jy ! Component: 2750 - total flux cleaned = -0.00404357 Jy ! Component: 2800 - total flux cleaned = -0.00408961 Jy ! Component: 2850 - total flux cleaned = -0.00412378 Jy ! Component: 2900 - total flux cleaned = -0.00416902 Jy ! Component: 2950 - total flux cleaned = -0.00418024 Jy ! Component: 3000 - total flux cleaned = -0.00424681 Jy ! Component: 3050 - total flux cleaned = -0.00426878 Jy ! Component: 3100 - total flux cleaned = -0.00427958 Jy ! Component: 3150 - total flux cleaned = -0.00436577 Jy ! Component: 3200 - total flux cleaned = -0.00436572 Jy ! Component: 3250 - total flux cleaned = -0.00442922 Jy ! Component: 3300 - total flux cleaned = -0.00440826 Jy ! Component: 3350 - total flux cleaned = -0.00446045 Jy ! Component: 3400 - total flux cleaned = -0.0045017 Jy ! Component: 3450 - total flux cleaned = -0.00451199 Jy ! Component: 3500 - total flux cleaned = -0.00457287 Jy ! Component: 3550 - total flux cleaned = -0.00460313 Jy ! Component: 3600 - total flux cleaned = -0.0046332 Jy ! Component: 3650 - total flux cleaned = -0.00468284 Jy ! Component: 3700 - total flux cleaned = -0.00471238 Jy ! Component: 3750 - total flux cleaned = -0.00475157 Jy ! Component: 3800 - total flux cleaned = -0.00482933 Jy ! Component: 3850 - total flux cleaned = -0.00485821 Jy ! Component: 3900 - total flux cleaned = -0.00490603 Jy ! Component: 3950 - total flux cleaned = -0.00494401 Jy ! Component: 4000 - total flux cleaned = -0.00502899 Jy ! Component: 4050 - total flux cleaned = -0.00503831 Jy ! Total flux subtracted in 4096 components = -0.00509427 Jy ! Clean residual min=-0.000552 max=0.000594 Jy/beam ! Clean residual mean=-0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.149047 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 467 components and 0.149047 Jy ![Exited script file: muppet] wmap "J0150-0725_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.17 x 8.022 at -5.023 degrees (North through East) ! Clean map min=-0.0016322 max=0.065135 Jy/beam ! Writing clean map to FITS file: J0150-0725_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0651346 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000166544 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.767077 0.767077 1.53415 3.06831 6.13662 12.2732 24.5465 49.0929 98.1858 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.17 x 8.022 at -5.023 degrees (North through East) ! Clean map min=-0.0016322 max=0.065135 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0150-0725_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:16:45 2019