! Started logfile: J0148+4215_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:33:21 2019 obs J0148+4215_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0148+4215_S_2017_05_31_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.954762 visibilities/baseline/integration-bin. ! Found source: J0148+4215 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 14436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0148+4215_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 470 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.928748Jy sigma=0.009349 ! Fit after self-cal, rms=0.921455Jy sigma=0.009295 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=5.119 mas, bpa=-4.266 degrees ! Estimated noise=988.737 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0618682 Jy ! Component: 100 - total flux cleaned = 0.075435 Jy ! Total flux subtracted in 100 components = 0.075435 Jy ! Clean residual min=-0.003233 max=0.003906 Jy/beam ! Clean residual mean=-0.000002 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.075435 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.075435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081395Jy sigma=0.000677 ! Fit after self-cal, rms=0.081386Jy sigma=0.000677 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.68 mas, bmaj=6.039 mas, bpa=-2.71 degrees ! Estimated noise=670.401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388908 Jy ! Component: 100 - total flux cleaned = 0.00533523 Jy ! Component: 150 - total flux cleaned = 0.00588693 Jy ! Component: 200 - total flux cleaned = 0.00598145 Jy ! Total flux subtracted in 200 components = 0.00598145 Jy ! Clean residual min=-0.002120 max=0.002012 Jy/beam ! Clean residual mean=0.000001 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0814164 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.0814164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081079Jy sigma=0.000675 ! Fit after self-cal, rms=0.081082Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.93 KP 1.02 ! LA 1.02 MK 1.08 NL 0.90 OV 1.00 ! PT 1.05 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.01 KP 0.98 ! LA 0.93 MK 1.03 NL 1.06 OV 1.22 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.04 HN 0.99 KP 1.00 ! LA 0.98 MK 1.08 NL 1.04 OV 0.94 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.97 KP 0.86 ! LA 0.99 MK 1.07 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.081082Jy sigma=0.000675 ! Fit after self-cal, rms=0.079063Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.708 mas, bmaj=6.038 mas, bpa=-2.153 degrees ! Estimated noise=675.846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000739246 Jy ! Component: 100 - total flux cleaned = 0.000843203 Jy ! Component: 150 - total flux cleaned = 0.000900649 Jy ! Component: 200 - total flux cleaned = 0.000925586 Jy ! Total flux subtracted in 200 components = 0.000925586 Jy ! Clean residual min=-0.002050 max=0.001951 Jy/beam ! Clean residual mean=0.000000 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.082342 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.082342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079045Jy sigma=0.000672 ! Fit after self-cal, rms=0.079006Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079006Jy sigma=0.000672 ! Fit after self-cal, rms=0.074062Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=6.036 mas, bpa=-2.265 degrees ! Estimated noise=676.264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013496 Jy ! Component: 100 - total flux cleaned = 0.000176945 Jy ! Component: 150 - total flux cleaned = 0.000167875 Jy ! Component: 200 - total flux cleaned = 0.000158854 Jy ! Total flux subtracted in 200 components = 0.000158854 Jy ! Clean residual min=-0.001569 max=0.001835 Jy/beam ! Clean residual mean=0.000001 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0825009 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.0825009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074056Jy sigma=0.000668 ! Fit after self-cal, rms=0.074062Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (117, 24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163159 Jy ! Component: 100 - total flux cleaned = 0.00213467 Jy ! Component: 150 - total flux cleaned = 0.00229776 Jy ! Component: 200 - total flux cleaned = 0.0024587 Jy ! Total flux subtracted in 200 components = 0.0024587 Jy ! Clean residual min=-0.001587 max=0.001717 Jy/beam ! Clean residual mean=0.000000 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0849596 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 0.0849596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074019Jy sigma=0.000667 ! Fit after self-cal, rms=0.074013Jy sigma=0.000667 ! Inverting map ! Added new window around map position (-98, 36). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157154 Jy ! Component: 100 - total flux cleaned = 0.00177185 Jy ! Component: 150 - total flux cleaned = 0.00193786 Jy ! Component: 200 - total flux cleaned = 0.00211335 Jy ! Total flux subtracted in 200 components = 0.00211335 Jy ! Clean residual min=-0.001481 max=0.001506 Jy/beam ! Clean residual mean=-0.000001 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0870729 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.0870729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073968Jy sigma=0.000666 ! Fit after self-cal, rms=0.073964Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073964Jy sigma=0.000666 ! Fit after self-cal, rms=0.073848Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=6.044 mas, bpa=-2.219 degrees ! Estimated noise=674.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000675486 Jy ! Component: 100 - total flux cleaned = 0.000759392 Jy ! Component: 150 - total flux cleaned = 0.000860948 Jy ! Component: 200 - total flux cleaned = 0.000907613 Jy ! Total flux subtracted in 200 components = 0.000907613 Jy ! Clean residual min=-0.001457 max=0.001461 Jy/beam ! Clean residual mean=-0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0879805 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 77 components and 0.0879805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073828Jy sigma=0.000666 ! Fit after self-cal, rms=0.073830Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017009 Jy ! Component: 100 - total flux cleaned = 0.000213618 Jy ! Component: 150 - total flux cleaned = 0.000234344 Jy ! Component: 200 - total flux cleaned = 0.000254114 Jy ! Total flux subtracted in 200 components = 0.000254114 Jy ! Clean residual min=-0.001438 max=0.001446 Jy/beam ! Clean residual mean=-0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0882347 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 84 components and 0.0882346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073819Jy sigma=0.000666 ! Fit after self-cal, rms=0.073819Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073819Jy sigma=0.000666 ! Fit after self-cal, rms=0.073846Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.738 mas, bmaj=9.468 mas, bpa=-1.633 degrees ! Estimated noise=821.562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260398 Jy ! Component: 100 - total flux cleaned = 0.000438184 Jy ! Component: 150 - total flux cleaned = 0.000552541 Jy ! Component: 200 - total flux cleaned = 0.00064228 Jy ! Total flux subtracted in 200 components = 0.00064228 Jy ! Clean residual min=-0.001553 max=0.001551 Jy/beam ! Clean residual mean=-0.000001 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0888769 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.0888769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073842Jy sigma=0.000666 ! Fit after self-cal, rms=0.073842Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142982 Jy ! Component: 100 - total flux cleaned = 0.000212934 Jy ! Component: 150 - total flux cleaned = 0.000266546 Jy ! Component: 200 - total flux cleaned = 0.000316264 Jy ! Total flux subtracted in 200 components = 0.000316264 Jy ! Clean residual min=-0.001524 max=0.001525 Jy/beam ! Clean residual mean=-0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0891932 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 110 components and 0.0891932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073840Jy sigma=0.000666 ! Fit after self-cal, rms=0.073840Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=6.048 mas, bpa=-2.244 degrees ! Estimated noise=674.942 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.699 x 6.048 at -2.244 degrees (North through East) ! Clean map min=-0.0013668 max=0.080462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=5.136 mas, bpa=-3.842 degrees ! Estimated noise=994.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621758 Jy ! Component: 100 - total flux cleaned = 0.0759364 Jy ! Component: 150 - total flux cleaned = 0.0796001 Jy ! Component: 200 - total flux cleaned = 0.0819162 Jy ! Total flux subtracted in 200 components = 0.0819162 Jy ! Clean residual min=-0.003185 max=0.002403 Jy/beam ! Clean residual mean=-0.000000 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0819162 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0819162 Jy ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=6.048 mas, bpa=-2.244 degrees ! Estimated noise=674.942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207119 Jy ! Component: 100 - total flux cleaned = 0.00343877 Jy ! Component: 150 - total flux cleaned = 0.00413575 Jy ! Component: 200 - total flux cleaned = 0.00470882 Jy ! Total flux subtracted in 200 components = 0.00470882 Jy ! Clean residual min=-0.001610 max=0.001535 Jy/beam ! Clean residual mean=-0.000000 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.086625 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 0.086625 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.738 mas, bmaj=9.468 mas, bpa=-1.633 degrees ! Estimated noise=821.562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000677067 Jy ! Component: 100 - total flux cleaned = 0.00109258 Jy ! Component: 150 - total flux cleaned = 0.0014438 Jy ! Component: 200 - total flux cleaned = 0.00160908 Jy ! Total flux subtracted in 200 components = 0.00160908 Jy ! Clean residual min=-0.001659 max=0.001562 Jy/beam ! Clean residual mean=-0.000001 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0882341 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169239 Jy ! Component: 100 - total flux cleaned = 0.000320446 Jy ! Component: 150 - total flux cleaned = 0.00045761 Jy ! Component: 200 - total flux cleaned = 0.000552735 Jy ! Total flux subtracted in 200 components = 0.000552735 Jy ! Clean residual min=-0.001600 max=0.001528 Jy/beam ! Clean residual mean=-0.000001 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0887868 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 84 components and 0.0887868 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=6.048 mas, bpa=-2.244 degrees ! Estimated noise=674.942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.67841e-05 Jy ! Component: 100 - total flux cleaned = -3.48946e-05 Jy ! Component: 150 - total flux cleaned = -6.2507e-05 Jy ! Component: 200 - total flux cleaned = 1.42357e-05 Jy ! Total flux subtracted in 200 components = 1.42357e-05 Jy ! Clean residual min=-0.001437 max=0.001483 Jy/beam ! Clean residual mean=-0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0888011 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 0.088801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073858Jy sigma=0.000666 ! Fit after self-cal, rms=0.073856Jy sigma=0.000666 wmodel J0148+4215_S_2017_05_31_pus_map.mod ! Writing 99 model components to file: J0148+4215_S_2017_05_31_pus_map.mod wobs J0148+4215_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0148+4215_S_2017_05_31_pus_uvs.fits wwins J0148+4215_S_2017_05_31_pus_map.win ! wwins: Wrote 3 windows to J0148+4215_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.22922e-05 Jy ! Component: 100 - total flux cleaned = 0.000205443 Jy ! Component: 150 - total flux cleaned = 0.000349992 Jy ! Component: 200 - total flux cleaned = 0.000560259 Jy ! Component: 250 - total flux cleaned = 0.000673937 Jy ! Component: 300 - total flux cleaned = 0.000784415 Jy ! Component: 350 - total flux cleaned = 0.000871062 Jy ! Component: 400 - total flux cleaned = 0.000977409 Jy ! Component: 450 - total flux cleaned = 0.00112293 Jy ! Component: 500 - total flux cleaned = 0.00116343 Jy ! Component: 550 - total flux cleaned = 0.00120378 Jy ! Component: 600 - total flux cleaned = 0.00126331 Jy ! Component: 650 - total flux cleaned = 0.00136082 Jy ! Component: 700 - total flux cleaned = 0.00141855 Jy ! Component: 750 - total flux cleaned = 0.00143767 Jy ! Component: 800 - total flux cleaned = 0.00149386 Jy ! Component: 850 - total flux cleaned = 0.0016042 Jy ! Component: 900 - total flux cleaned = 0.00164069 Jy ! Component: 950 - total flux cleaned = 0.00171233 Jy ! Component: 1000 - total flux cleaned = 0.00180075 Jy ! Component: 1050 - total flux cleaned = 0.00187061 Jy ! Component: 1100 - total flux cleaned = 0.00192272 Jy ! Component: 1150 - total flux cleaned = 0.00200836 Jy ! Component: 1200 - total flux cleaned = 0.00205938 Jy ! Component: 1250 - total flux cleaned = 0.00217646 Jy ! Component: 1300 - total flux cleaned = 0.00222628 Jy ! Component: 1350 - total flux cleaned = 0.00235777 Jy ! Component: 1400 - total flux cleaned = 0.00242269 Jy ! Component: 1450 - total flux cleaned = 0.00243893 Jy ! Component: 1500 - total flux cleaned = 0.0025347 Jy ! Component: 1550 - total flux cleaned = 0.00256605 Jy ! Component: 1600 - total flux cleaned = 0.00262859 Jy ! Component: 1650 - total flux cleaned = 0.00262867 Jy ! Component: 1700 - total flux cleaned = 0.00267465 Jy ! Component: 1750 - total flux cleaned = 0.00267443 Jy ! Component: 1800 - total flux cleaned = 0.00270466 Jy ! Component: 1850 - total flux cleaned = 0.00268951 Jy ! Component: 1900 - total flux cleaned = 0.0026599 Jy ! Component: 1950 - total flux cleaned = 0.00274819 Jy ! Component: 2000 - total flux cleaned = 0.00267483 Jy ! Component: 2050 - total flux cleaned = 0.00268925 Jy ! Component: 2100 - total flux cleaned = 0.00270361 Jy ! Component: 2150 - total flux cleaned = 0.0027608 Jy ! Component: 2200 - total flux cleaned = 0.00274652 Jy ! Component: 2250 - total flux cleaned = 0.00276067 Jy ! Component: 2300 - total flux cleaned = 0.00278835 Jy ! Component: 2350 - total flux cleaned = 0.00281582 Jy ! Component: 2400 - total flux cleaned = 0.00276059 Jy ! Component: 2450 - total flux cleaned = 0.00278775 Jy ! Component: 2500 - total flux cleaned = 0.00277421 Jy ! Component: 2550 - total flux cleaned = 0.00282803 Jy ! Component: 2600 - total flux cleaned = 0.00280123 Jy ! Component: 2650 - total flux cleaned = 0.00281447 Jy ! Component: 2700 - total flux cleaned = 0.00278799 Jy ! Component: 2750 - total flux cleaned = 0.00282736 Jy ! Component: 2800 - total flux cleaned = 0.0028404 Jy ! Component: 2850 - total flux cleaned = 0.00285339 Jy ! Component: 2900 - total flux cleaned = 0.00281487 Jy ! Component: 2950 - total flux cleaned = 0.0028528 Jy ! Component: 3000 - total flux cleaned = 0.0028274 Jy ! Component: 3050 - total flux cleaned = 0.00280228 Jy ! Component: 3100 - total flux cleaned = 0.00283976 Jy ! Component: 3150 - total flux cleaned = 0.00280262 Jy ! Component: 3200 - total flux cleaned = 0.00283962 Jy ! Component: 3250 - total flux cleaned = 0.00281504 Jy ! Component: 3300 - total flux cleaned = 0.00290031 Jy ! Component: 3350 - total flux cleaned = 0.00286392 Jy ! Component: 3400 - total flux cleaned = 0.00292425 Jy ! Component: 3450 - total flux cleaned = 0.00296015 Jy ! Component: 3500 - total flux cleaned = 0.00301971 Jy ! Component: 3550 - total flux cleaned = 0.0029842 Jy ! Component: 3600 - total flux cleaned = 0.00304317 Jy ! Component: 3650 - total flux cleaned = 0.00307839 Jy ! Component: 3700 - total flux cleaned = 0.00308999 Jy ! Component: 3750 - total flux cleaned = 0.00311319 Jy ! Component: 3800 - total flux cleaned = 0.00312475 Jy ! Component: 3850 - total flux cleaned = 0.00315922 Jy ! Component: 3900 - total flux cleaned = 0.00319355 Jy ! Component: 3950 - total flux cleaned = 0.00319363 Jy ! Component: 4000 - total flux cleaned = 0.00325014 Jy ! Component: 4050 - total flux cleaned = 0.00330641 Jy ! Total flux subtracted in 4096 components = 0.00327281 Jy ! Clean residual min=-0.000640 max=0.000749 Jy/beam ! Clean residual mean=0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0920739 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 417 components and 0.0920739 Jy ![Exited script file: muppet] wmap "J0148+4215_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.699 x 6.048 at -2.244 degrees (North through East) ! Clean map min=-0.0011257 max=0.080457 Jy/beam ! Writing clean map to FITS file: J0148+4215_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0804575 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204866 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.763879 0.763879 1.52776 3.05552 6.11103 12.2221 24.4441 48.8883 97.7766 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.699 x 6.048 at -2.244 degrees (North through East) ! Clean map min=-0.0011257 max=0.080457 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0148+4215_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:33:31 2019