! Started logfile: J0146+2110_S_2017_07_16_pus_uvs.log on Thu May 9 10:57:55 2019 obs J0146+2110_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0146+2110_S_2017_07_16_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.669623 visibilities/baseline/integration-bin. ! Found source: J0146+2110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 26276 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0146+2110_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 381 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 513 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 528 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1525 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.710879Jy sigma=0.006527 ! Fit after self-cal, rms=0.676757Jy sigma=0.006207 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=5.67 mas, bpa=-6.906 degrees ! Estimated noise=950.944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.31774 Jy ! Component: 100 - total flux cleaned = 0.46642 Jy ! Total flux subtracted in 100 components = 0.46642 Jy ! Clean residual min=-0.044876 max=0.130932 Jy/beam ! Clean residual mean=-0.000030 rms=0.012737 Jy/beam ! Combined flux in latest and established models = 0.46642 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.46642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245871Jy sigma=0.002302 ! Fit after self-cal, rms=0.242147Jy sigma=0.002262 ! Inverting map ! Added new window around map position (3, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118325 Jy ! Component: 100 - total flux cleaned = 0.176911 Jy ! Total flux subtracted in 100 components = 0.176911 Jy ! Clean residual min=-0.027200 max=0.076808 Jy/beam ! Clean residual mean=-0.000026 rms=0.007344 Jy/beam ! Combined flux in latest and established models = 0.643332 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 14 components and 0.643332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168960Jy sigma=0.001523 ! Fit after self-cal, rms=0.162005Jy sigma=0.001442 ! Inverting map ! Added new window around map position (-5, 8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0673163 Jy ! Component: 100 - total flux cleaned = 0.107001 Jy ! Total flux subtracted in 100 components = 0.107001 Jy ! Clean residual min=-0.017584 max=0.036884 Jy/beam ! Clean residual mean=-0.000016 rms=0.004639 Jy/beam ! Combined flux in latest and established models = 0.750333 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.750333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123916Jy sigma=0.001058 ! Fit after self-cal, rms=0.122565Jy sigma=0.001046 ! Inverting map ! Added new window around map position (-14.5, 21). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0368721 Jy ! Component: 100 - total flux cleaned = 0.0607717 Jy ! Total flux subtracted in 100 components = 0.0607717 Jy ! Clean residual min=-0.012885 max=0.013681 Jy/beam ! Clean residual mean=-0.000008 rms=0.003418 Jy/beam ! Combined flux in latest and established models = 0.811104 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.811104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106838Jy sigma=0.000894 ! Fit after self-cal, rms=0.106043Jy sigma=0.000886 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.977 mas, bmaj=6.505 mas, bpa=-5.901 degrees ! Estimated noise=554.753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267995 Jy ! Component: 100 - total flux cleaned = 0.0452149 Jy ! Component: 150 - total flux cleaned = 0.0596184 Jy ! Component: 200 - total flux cleaned = 0.0711288 Jy ! Total flux subtracted in 200 components = 0.0711288 Jy ! Clean residual min=-0.007407 max=0.009199 Jy/beam ! Clean residual mean=-0.000030 rms=0.002193 Jy/beam ! Combined flux in latest and established models = 0.882233 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 69 components and 0.882233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096042Jy sigma=0.000793 ! Fit after self-cal, rms=0.095647Jy sigma=0.000788 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.95 KP 1.02 ! LA 0.99 MK 1.00 NL 0.88 OV 0.99 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.00 KP 0.99 ! LA 0.96 MK 1.02 NL 1.03 OV 1.02 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.00 KP 0.99 ! LA 0.99 MK 1.06 NL 1.02 OV 0.95 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! A total of 375 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 1.00* ! LA 0.91 MK 1.20 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.095647Jy sigma=0.000788 ! Fit after self-cal, rms=0.082432Jy sigma=0.000727 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=6.438 mas, bpa=-4.869 degrees ! Estimated noise=546.338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-43.5, 31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102221 Jy ! Component: 100 - total flux cleaned = 0.0153069 Jy ! Component: 150 - total flux cleaned = 0.0180162 Jy ! Component: 200 - total flux cleaned = 0.0188278 Jy ! Total flux subtracted in 200 components = 0.0188278 Jy ! Clean residual min=-0.005034 max=0.005835 Jy/beam ! Clean residual mean=-0.000011 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.901061 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 97 components and 0.901061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080659Jy sigma=0.000713 ! Fit after self-cal, rms=0.080523Jy sigma=0.000712 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080523Jy sigma=0.000712 ! Fit after self-cal, rms=0.075990Jy sigma=0.000689 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=6.437 mas, bpa=-4.676 degrees ! Estimated noise=545.889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394653 Jy ! Component: 100 - total flux cleaned = 0.00559851 Jy ! Component: 150 - total flux cleaned = 0.00625365 Jy ! Component: 200 - total flux cleaned = 0.00660792 Jy ! Total flux subtracted in 200 components = 0.00660792 Jy ! Clean residual min=-0.003766 max=0.003988 Jy/beam ! Clean residual mean=-0.000001 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.907669 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 114 components and 0.907669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075390Jy sigma=0.000684 ! Fit after self-cal, rms=0.075358Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000756414 Jy ! Component: 100 - total flux cleaned = 0.000873293 Jy ! Component: 150 - total flux cleaned = 0.000875389 Jy ! Component: 200 - total flux cleaned = 0.000966845 Jy ! Total flux subtracted in 200 components = 0.000966845 Jy ! Clean residual min=-0.003375 max=0.003624 Jy/beam ! Clean residual mean=-0.000000 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.908635 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 122 components and 0.908635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075074Jy sigma=0.000681 ! Fit after self-cal, rms=0.075058Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075058Jy sigma=0.000681 ! Fit after self-cal, rms=0.074513Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=6.435 mas, bpa=-4.582 degrees ! Estimated noise=544.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151727 Jy ! Component: 100 - total flux cleaned = 0.0018821 Jy ! Component: 150 - total flux cleaned = 0.00212916 Jy ! Component: 200 - total flux cleaned = 0.00228407 Jy ! Total flux subtracted in 200 components = 0.00228407 Jy ! Clean residual min=-0.003036 max=0.003351 Jy/beam ! Clean residual mean=-0.000002 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.91092 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 130 components and 0.910919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074290Jy sigma=0.000678 ! Fit after self-cal, rms=0.074273Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (38, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000950674 Jy ! Component: 100 - total flux cleaned = 0.000854975 Jy ! Component: 150 - total flux cleaned = 0.000856344 Jy ! Component: 200 - total flux cleaned = 0.000934888 Jy ! Total flux subtracted in 200 components = 0.000934888 Jy ! Clean residual min=-0.003015 max=0.002746 Jy/beam ! Clean residual mean=-0.000000 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.911854 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 146 components and 0.911854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074003Jy sigma=0.000676 ! Fit after self-cal, rms=0.073990Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073990Jy sigma=0.000675 ! Fit after self-cal, rms=0.073685Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.682 mas, bmaj=9.868 mas, bpa=-10.26 degrees ! Estimated noise=713.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164215 Jy ! Component: 100 - total flux cleaned = 0.00192278 Jy ! Component: 150 - total flux cleaned = 0.00209193 Jy ! Component: 200 - total flux cleaned = 0.00204326 Jy ! Total flux subtracted in 200 components = 0.00204326 Jy ! Clean residual min=-0.003077 max=0.002332 Jy/beam ! Clean residual mean=0.000000 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.913898 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 161 components and 0.913898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073627Jy sigma=0.000675 ! Fit after self-cal, rms=0.073616Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203027 Jy ! Component: 100 - total flux cleaned = 6.40516e-05 Jy ! Component: 150 - total flux cleaned = -6.31741e-05 Jy ! Component: 200 - total flux cleaned = -0.000182453 Jy ! Total flux subtracted in 200 components = -0.000182453 Jy ! Clean residual min=-0.002997 max=0.002319 Jy/beam ! Clean residual mean=0.000001 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.913715 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 175 components and 0.913715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073605Jy sigma=0.000675 ! Fit after self-cal, rms=0.073602Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=6.433 mas, bpa=-4.553 degrees ! Estimated noise=544.098 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.034 x 6.433 at -4.553 degrees (North through East) ! Clean map min=-0.0030127 max=0.317 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.533 mas, bmaj=5.613 mas, bpa=-5.36 degrees ! Estimated noise=934.217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.326204 Jy ! Component: 100 - total flux cleaned = 0.494775 Jy ! Component: 150 - total flux cleaned = 0.595867 Jy ! Component: 200 - total flux cleaned = 0.661473 Jy ! Total flux subtracted in 200 components = 0.661473 Jy ! Clean residual min=-0.019474 max=0.037078 Jy/beam ! Clean residual mean=-0.000010 rms=0.005559 Jy/beam ! Combined flux in latest and established models = 0.661473 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.661473 Jy ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=6.433 mas, bpa=-4.553 degrees ! Estimated noise=544.098 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0626406 Jy ! Component: 100 - total flux cleaned = 0.106463 Jy ! Component: 150 - total flux cleaned = 0.138463 Jy ! Component: 200 - total flux cleaned = 0.162373 Jy ! Total flux subtracted in 200 components = 0.162373 Jy ! Clean residual min=-0.008762 max=0.013771 Jy/beam ! Clean residual mean=-0.000056 rms=0.002737 Jy/beam ! Combined flux in latest and established models = 0.823846 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 58 components and 0.823846 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182952 Jy ! Component: 100 - total flux cleaned = 0.0325855 Jy ! Component: 150 - total flux cleaned = 0.0439183 Jy ! Component: 200 - total flux cleaned = 0.0530872 Jy ! Total flux subtracted in 200 components = 0.0530872 Jy ! Clean residual min=-0.004976 max=0.006262 Jy/beam ! Clean residual mean=-0.000023 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.876933 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 82 components and 0.876933 Jy ! Inverting map ! Added new window around map position (6, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00763776 Jy ! Component: 100 - total flux cleaned = 0.0138993 Jy ! Component: 150 - total flux cleaned = 0.0191465 Jy ! Component: 200 - total flux cleaned = 0.0235932 Jy ! Total flux subtracted in 200 components = 0.0235932 Jy ! Clean residual min=-0.003827 max=0.004297 Jy/beam ! Clean residual mean=-0.000008 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.900527 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 98 components and 0.900526 Jy ! Inverting map ! Added new window around map position (28.5, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384488 Jy ! Component: 100 - total flux cleaned = 0.00524374 Jy ! Component: 150 - total flux cleaned = 0.00639556 Jy ! Component: 200 - total flux cleaned = 0.00698688 Jy ! Total flux subtracted in 200 components = 0.00698688 Jy ! Clean residual min=-0.003356 max=0.003580 Jy/beam ! Clean residual mean=-0.000003 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.907513 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 121 components and 0.907513 Jy ! Inverting map ! Added new window around map position (-10.5, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.92018e-05 Jy ! Component: 100 - total flux cleaned = 0.000335366 Jy ! Component: 150 - total flux cleaned = 0.000980927 Jy ! Component: 200 - total flux cleaned = 0.00147501 Jy ! Total flux subtracted in 200 components = 0.00147501 Jy ! Clean residual min=-0.002835 max=0.002663 Jy/beam ! Clean residual mean=-0.000001 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.908988 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 141 components and 0.908988 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.682 mas, bmaj=9.868 mas, bpa=-10.26 degrees ! Estimated noise=713.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273239 Jy ! Component: 100 - total flux cleaned = 0.00313131 Jy ! Component: 150 - total flux cleaned = 0.00344284 Jy ! Component: 200 - total flux cleaned = 0.00349585 Jy ! Total flux subtracted in 200 components = 0.00349585 Jy ! Clean residual min=-0.002739 max=0.002193 Jy/beam ! Clean residual mean=0.000002 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.912484 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.8769e-05 Jy ! Component: 100 - total flux cleaned = 1.31635e-06 Jy ! Component: 150 - total flux cleaned = -4.26438e-05 Jy ! Component: 200 - total flux cleaned = -8.50085e-05 Jy ! Total flux subtracted in 200 components = -8.50085e-05 Jy ! Clean residual min=-0.002615 max=0.002044 Jy/beam ! Clean residual mean=0.000002 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.912399 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 189 components and 0.912399 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=6.433 mas, bpa=-4.553 degrees ! Estimated noise=544.098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129098 Jy ! Component: 100 - total flux cleaned = -0.00154355 Jy ! Component: 150 - total flux cleaned = -0.00193668 Jy ! Component: 200 - total flux cleaned = -0.00215753 Jy ! Total flux subtracted in 200 components = -0.00215753 Jy ! Clean residual min=-0.002562 max=0.002584 Jy/beam ! Clean residual mean=-0.000000 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.910241 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 214 components and 0.910241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073398Jy sigma=0.000673 ! Fit after self-cal, rms=0.073315Jy sigma=0.000672 wmodel J0146+2110_S_2017_07_16_pus_map.mod ! Writing 214 model components to file: J0146+2110_S_2017_07_16_pus_map.mod wobs J0146+2110_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0146+2110_S_2017_07_16_pus_uvs.fits wwins J0146+2110_S_2017_07_16_pus_map.win ! wwins: Wrote 9 windows to J0146+2110_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000646249 Jy ! Component: 100 - total flux cleaned = -0.000646508 Jy ! Component: 150 - total flux cleaned = -0.000645716 Jy ! Component: 200 - total flux cleaned = -0.000569195 Jy ! Component: 250 - total flux cleaned = -0.000421875 Jy ! Component: 300 - total flux cleaned = -0.000351232 Jy ! Component: 350 - total flux cleaned = -0.00035164 Jy ! Component: 400 - total flux cleaned = -0.000351416 Jy ! Component: 450 - total flux cleaned = -0.000220459 Jy ! Component: 500 - total flux cleaned = -9.28906e-05 Jy ! Component: 550 - total flux cleaned = -6.2188e-05 Jy ! Component: 600 - total flux cleaned = 6.06342e-05 Jy ! Component: 650 - total flux cleaned = 0.00015052 Jy ! Component: 700 - total flux cleaned = 0.000239204 Jy ! Component: 750 - total flux cleaned = 0.000354391 Jy ! Component: 800 - total flux cleaned = 0.000353383 Jy ! Component: 850 - total flux cleaned = 0.000380959 Jy ! Component: 900 - total flux cleaned = 0.00040769 Jy ! Component: 950 - total flux cleaned = 0.000407245 Jy ! Component: 1000 - total flux cleaned = 0.00043358 Jy ! Component: 1050 - total flux cleaned = 0.000485641 Jy ! Component: 1100 - total flux cleaned = 0.000485535 Jy ! Component: 1150 - total flux cleaned = 0.000485332 Jy ! Component: 1200 - total flux cleaned = 0.000510785 Jy ! Component: 1250 - total flux cleaned = 0.00063457 Jy ! Component: 1300 - total flux cleaned = 0.000536999 Jy ! Component: 1350 - total flux cleaned = 0.00060923 Jy ! Component: 1400 - total flux cleaned = 0.000562065 Jy ! Component: 1450 - total flux cleaned = 0.000562565 Jy ! Component: 1500 - total flux cleaned = 0.00065537 Jy ! Component: 1550 - total flux cleaned = 0.000654858 Jy ! Component: 1600 - total flux cleaned = 0.000564164 Jy ! Component: 1650 - total flux cleaned = 0.000586737 Jy ! Component: 1700 - total flux cleaned = 0.00056499 Jy ! Component: 1750 - total flux cleaned = 0.000565189 Jy ! Component: 1800 - total flux cleaned = 0.000629508 Jy ! Component: 1850 - total flux cleaned = 0.000650665 Jy ! Component: 1900 - total flux cleaned = 0.000650312 Jy ! Component: 1950 - total flux cleaned = 0.000671137 Jy ! Component: 2000 - total flux cleaned = 0.000671288 Jy ! Component: 2050 - total flux cleaned = 0.000651027 Jy ! Component: 2100 - total flux cleaned = 0.000691271 Jy ! Component: 2150 - total flux cleaned = 0.000751403 Jy ! Component: 2200 - total flux cleaned = 0.000751053 Jy ! Component: 2250 - total flux cleaned = 0.000751277 Jy ! Component: 2300 - total flux cleaned = 0.000751243 Jy ! Component: 2350 - total flux cleaned = 0.000770209 Jy ! Component: 2400 - total flux cleaned = 0.000826842 Jy ! Component: 2450 - total flux cleaned = 0.000808117 Jy ! Component: 2500 - total flux cleaned = 0.00080811 Jy ! Component: 2550 - total flux cleaned = 0.000863386 Jy ! Component: 2600 - total flux cleaned = 0.000863295 Jy ! Component: 2650 - total flux cleaned = 0.00084516 Jy ! Component: 2700 - total flux cleaned = 0.000844964 Jy ! Component: 2750 - total flux cleaned = 0.000792027 Jy ! Component: 2800 - total flux cleaned = 0.000757298 Jy ! Component: 2850 - total flux cleaned = 0.000774689 Jy ! Component: 2900 - total flux cleaned = 0.000757415 Jy ! Component: 2950 - total flux cleaned = 0.000723047 Jy ! Component: 3000 - total flux cleaned = 0.000722911 Jy ! Component: 3050 - total flux cleaned = 0.000806491 Jy ! Component: 3100 - total flux cleaned = 0.00075656 Jy ! Component: 3150 - total flux cleaned = 0.000773072 Jy ! Component: 3200 - total flux cleaned = 0.000822126 Jy ! Component: 3250 - total flux cleaned = 0.000805791 Jy ! Component: 3300 - total flux cleaned = 0.000773799 Jy ! Component: 3350 - total flux cleaned = 0.000805495 Jy ! Component: 3400 - total flux cleaned = 0.000837269 Jy ! Component: 3450 - total flux cleaned = 0.000790514 Jy ! Component: 3500 - total flux cleaned = 0.000836927 Jy ! Component: 3550 - total flux cleaned = 0.00082155 Jy ! Component: 3600 - total flux cleaned = 0.000775745 Jy ! Component: 3650 - total flux cleaned = 0.00085178 Jy ! Component: 3700 - total flux cleaned = 0.000821676 Jy ! Component: 3750 - total flux cleaned = 0.000821807 Jy ! Component: 3800 - total flux cleaned = 0.000851139 Jy ! Component: 3850 - total flux cleaned = 0.000836342 Jy ! Component: 3900 - total flux cleaned = 0.000850944 Jy ! Component: 3950 - total flux cleaned = 0.000894431 Jy ! Component: 4000 - total flux cleaned = 0.000851379 Jy ! Component: 4050 - total flux cleaned = 0.000979956 Jy ! Total flux subtracted in 4096 components = 0.00103667 Jy ! Clean residual min=-0.000840 max=0.000905 Jy/beam ! Clean residual mean=0.000001 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.911278 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 539 components and 0.911278 Jy ![Exited script file: muppet] wmap "J0146+2110_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.034 x 6.433 at -4.553 degrees (North through East) ! Clean map min=-0.0019615 max=0.31589 Jy/beam ! Writing clean map to FITS file: J0146+2110_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.31589 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000261184 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.248046 0.248046 0.496092 0.992185 1.98437 3.96874 7.93748 15.875 31.7499 63.4998 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.315 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.034 x 6.433 at -4.553 degrees (North through East) ! Clean map min=-0.0019615 max=0.31589 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0146+2110_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:58:01 2019