! Started logfile: J0145+5810_S_2017_05_27_pus_uvs.log on Fri May 3 10:54:42 2019 obs J0145+5810_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0145+5810_S_2017_05_27_pus_uva.fits ! AN table 1: 222 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98038 visibilities/baseline/integration-bin. ! Found source: J0145+5810 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 39176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0145+5810_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1136 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945090Jy sigma=0.008372 ! Fit after self-cal, rms=0.925841Jy sigma=0.008215 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.008 mas, bmaj=4.013 mas, bpa=-0.4768 degrees ! Estimated noise=987.363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484043 Jy ! Component: 100 - total flux cleaned = 0.0726997 Jy ! Total flux subtracted in 100 components = 0.0726997 Jy ! Clean residual min=-0.007247 max=0.017173 Jy/beam ! Clean residual mean=-0.000054 rms=0.002179 Jy/beam ! Combined flux in latest and established models = 0.0726997 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.0726997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102083Jy sigma=0.000887 ! Fit after self-cal, rms=0.101764Jy sigma=0.000885 ! Inverting map ! Added new window around map position (-1, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204411 Jy ! Component: 100 - total flux cleaned = 0.036048 Jy ! Total flux subtracted in 100 components = 0.036048 Jy ! Clean residual min=-0.005909 max=0.011841 Jy/beam ! Clean residual mean=-0.000046 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.108748 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 56 components and 0.108748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093159Jy sigma=0.000795 ! Fit after self-cal, rms=0.092817Jy sigma=0.000792 ! Inverting map ! Added new window around map position (-4.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147112 Jy ! Component: 100 - total flux cleaned = 0.0260954 Jy ! Total flux subtracted in 100 components = 0.0260954 Jy ! Clean residual min=-0.005029 max=0.009128 Jy/beam ! Clean residual mean=-0.000040 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.134843 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 79 components and 0.134843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088024Jy sigma=0.000742 ! Fit after self-cal, rms=0.087836Jy sigma=0.000740 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106005 Jy ! Component: 100 - total flux cleaned = 0.0190491 Jy ! Total flux subtracted in 100 components = 0.0190491 Jy ! Clean residual min=-0.004493 max=0.007024 Jy/beam ! Clean residual mean=-0.000036 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.153892 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 94 components and 0.153892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085150Jy sigma=0.000712 ! Fit after self-cal, rms=0.085040Jy sigma=0.000711 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=4.997 mas, bpa=-0.1194 degrees ! Estimated noise=454.472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149477 Jy ! Component: 100 - total flux cleaned = 0.0256809 Jy ! Component: 150 - total flux cleaned = 0.0336419 Jy ! Component: 200 - total flux cleaned = 0.0395883 Jy ! Total flux subtracted in 200 components = 0.0395883 Jy ! Clean residual min=-0.004138 max=0.006216 Jy/beam ! Clean residual mean=-0.000089 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.19348 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 133 components and 0.193481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081716Jy sigma=0.000676 ! Fit after self-cal, rms=0.081546Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.93 HN 1.08 KP 0.91 ! LA 0.93 MK 1.12 NL 1.02 OV 1.04 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 1.16 KP 0.87 ! LA 0.90 MK 1.11 NL 1.14 OV 1.08 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.02 HN 1.03 KP 0.91 ! LA 0.95 MK 1.17 NL 1.15 OV 1.01 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00 KP 1.00* ! LA 0.98 MK 0.73 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.081546Jy sigma=0.000674 ! Fit after self-cal, rms=0.083573Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=5.082 mas, bpa=0.8107 degrees ! Estimated noise=461.519 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000486655 Jy ! Component: 100 - total flux cleaned = 0.0009856 Jy ! Component: 150 - total flux cleaned = 0.00143145 Jy ! Component: 200 - total flux cleaned = 0.00179814 Jy ! Total flux subtracted in 200 components = 0.00179814 Jy ! Clean residual min=-0.003010 max=0.003932 Jy/beam ! Clean residual mean=-0.000082 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.195279 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 137 components and 0.195279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083515Jy sigma=0.000663 ! Fit after self-cal, rms=0.083581Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083581Jy sigma=0.000663 ! Fit after self-cal, rms=0.083891Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=5.102 mas, bpa=-2.061 degrees ! Estimated noise=456.676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043391 Jy ! Component: 100 - total flux cleaned = 0.000787944 Jy ! Component: 150 - total flux cleaned = 0.00111419 Jy ! Component: 200 - total flux cleaned = 0.00134571 Jy ! Total flux subtracted in 200 components = 0.00134571 Jy ! Clean residual min=-0.002694 max=0.003500 Jy/beam ! Clean residual mean=-0.000021 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.196624 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 142 components and 0.196624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083859Jy sigma=0.000659 ! Fit after self-cal, rms=0.083891Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31.5, -75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365311 Jy ! Component: 100 - total flux cleaned = 0.00580089 Jy ! Component: 150 - total flux cleaned = 0.00734241 Jy ! Component: 200 - total flux cleaned = 0.00858449 Jy ! Total flux subtracted in 200 components = 0.00858449 Jy ! Clean residual min=-0.002318 max=0.002219 Jy/beam ! Clean residual mean=-0.000014 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.205209 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 179 components and 0.205209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083717Jy sigma=0.000657 ! Fit after self-cal, rms=0.083690Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083690Jy sigma=0.000657 ! Fit after self-cal, rms=0.083000Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=5.101 mas, bpa=-3.022 degrees ! Estimated noise=451.259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151963 Jy ! Component: 100 - total flux cleaned = 0.00241008 Jy ! Component: 150 - total flux cleaned = 0.00315675 Jy ! Component: 200 - total flux cleaned = 0.00376821 Jy ! Total flux subtracted in 200 components = 0.00376821 Jy ! Clean residual min=-0.002098 max=0.002147 Jy/beam ! Clean residual mean=-0.000015 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.208977 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 180 components and 0.208977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082948Jy sigma=0.000656 ! Fit after self-cal, rms=0.082933Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (127.5, 80). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174963 Jy ! Component: 100 - total flux cleaned = 0.00229807 Jy ! Component: 150 - total flux cleaned = 0.00267463 Jy ! Component: 200 - total flux cleaned = 0.00298473 Jy ! Total flux subtracted in 200 components = 0.00298473 Jy ! Clean residual min=-0.002091 max=0.001870 Jy/beam ! Clean residual mean=-0.000015 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.211962 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 188 components and 0.211962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082885Jy sigma=0.000656 ! Fit after self-cal, rms=0.082869Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082869Jy sigma=0.000656 ! Fit after self-cal, rms=0.082257Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.261 mas, bmaj=8.931 mas, bpa=0.2303 degrees ! Estimated noise=545.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015677 Jy ! Component: 100 - total flux cleaned = 0.00224411 Jy ! Component: 150 - total flux cleaned = 0.00260619 Jy ! Component: 200 - total flux cleaned = 0.00295201 Jy ! Total flux subtracted in 200 components = 0.00295201 Jy ! Clean residual min=-0.002504 max=0.002723 Jy/beam ! Clean residual mean=-0.000031 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.214914 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 201 components and 0.214914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082239Jy sigma=0.000655 ! Fit after self-cal, rms=0.082223Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000539643 Jy ! Component: 100 - total flux cleaned = 0.000816184 Jy ! Component: 150 - total flux cleaned = 0.00108511 Jy ! Component: 200 - total flux cleaned = 0.00123028 Jy ! Total flux subtracted in 200 components = 0.00123028 Jy ! Clean residual min=-0.002415 max=0.002648 Jy/beam ! Clean residual mean=-0.000026 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.216144 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 207 components and 0.216144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082218Jy sigma=0.000655 ! Fit after self-cal, rms=0.082213Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=5.093 mas, bpa=-3.725 degrees ! Estimated noise=446.849 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 5.093 at -3.725 degrees (North through East) ! Clean map min=-0.0018931 max=0.053674 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=4.097 mas, bpa=-4.467 degrees ! Estimated noise=977.334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466631 Jy ! Component: 100 - total flux cleaned = 0.0755253 Jy ! Component: 150 - total flux cleaned = 0.0970949 Jy ! Component: 200 - total flux cleaned = 0.114026 Jy ! Total flux subtracted in 200 components = 0.114026 Jy ! Clean residual min=-0.005497 max=0.010147 Jy/beam ! Clean residual mean=-0.000034 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.114026 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.114026 Jy ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=5.093 mas, bpa=-3.725 degrees ! Estimated noise=446.849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242626 Jy ! Component: 100 - total flux cleaned = 0.0404994 Jy ! Component: 150 - total flux cleaned = 0.0519738 Jy ! Component: 200 - total flux cleaned = 0.0602397 Jy ! Total flux subtracted in 200 components = 0.0602397 Jy ! Clean residual min=-0.003273 max=0.005126 Jy/beam ! Clean residual mean=-0.000047 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.174266 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 111 components and 0.174266 Jy ! Inverting map ! Added new window around map position (-1, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00616213 Jy ! Component: 100 - total flux cleaned = 0.0110391 Jy ! Component: 150 - total flux cleaned = 0.0151639 Jy ! Component: 200 - total flux cleaned = 0.0186881 Jy ! Total flux subtracted in 200 components = 0.0186881 Jy ! Clean residual min=-0.002480 max=0.002634 Jy/beam ! Clean residual mean=-0.000033 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.192954 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 157 components and 0.192954 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.261 mas, bmaj=8.931 mas, bpa=0.2303 degrees ! Estimated noise=545.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00545699 Jy ! Component: 100 - total flux cleaned = 0.00938664 Jy ! Component: 150 - total flux cleaned = 0.0124625 Jy ! Component: 200 - total flux cleaned = 0.0149109 Jy ! Total flux subtracted in 200 components = 0.0149109 Jy ! Clean residual min=-0.002617 max=0.003086 Jy/beam ! Clean residual mean=-0.000049 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.207865 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196747 Jy ! Component: 100 - total flux cleaned = 0.00333254 Jy ! Component: 150 - total flux cleaned = 0.00421841 Jy ! Component: 200 - total flux cleaned = 0.00480207 Jy ! Total flux subtracted in 200 components = 0.00480207 Jy ! Clean residual min=-0.002434 max=0.002776 Jy/beam ! Clean residual mean=-0.000038 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.212667 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 233 components and 0.212667 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=5.093 mas, bpa=-3.725 degrees ! Estimated noise=446.849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260309 Jy ! Component: 100 - total flux cleaned = 0.000591182 Jy ! Component: 150 - total flux cleaned = 0.000847157 Jy ! Component: 200 - total flux cleaned = 0.00111274 Jy ! Total flux subtracted in 200 components = 0.00111274 Jy ! Clean residual min=-0.001918 max=0.002005 Jy/beam ! Clean residual mean=-0.000015 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.21378 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 253 components and 0.21378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082218Jy sigma=0.000655 ! Fit after self-cal, rms=0.082167Jy sigma=0.000655 wmodel J0145+5810_S_2017_05_27_pus_map.mod ! Writing 253 model components to file: J0145+5810_S_2017_05_27_pus_map.mod wobs J0145+5810_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0145+5810_S_2017_05_27_pus_uvs.fits wwins J0145+5810_S_2017_05_27_pus_map.win ! wwins: Wrote 6 windows to J0145+5810_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000337426 Jy ! Component: 100 - total flux cleaned = -0.000306275 Jy ! Component: 150 - total flux cleaned = -0.00021436 Jy ! Component: 200 - total flux cleaned = -3.82954e-05 Jy ! Component: 250 - total flux cleaned = 7.41883e-05 Jy ! Component: 300 - total flux cleaned = 0.000210673 Jy ! Component: 350 - total flux cleaned = 0.000369749 Jy ! Component: 400 - total flux cleaned = 0.000472945 Jy ! Component: 450 - total flux cleaned = 0.000548597 Jy ! Component: 500 - total flux cleaned = 0.000597634 Jy ! Component: 550 - total flux cleaned = 0.000670076 Jy ! Component: 600 - total flux cleaned = 0.000763915 Jy ! Component: 650 - total flux cleaned = 0.000878933 Jy ! Component: 700 - total flux cleaned = 0.000924278 Jy ! Component: 750 - total flux cleaned = 0.00101359 Jy ! Component: 800 - total flux cleaned = 0.00110116 Jy ! Component: 850 - total flux cleaned = 0.00112282 Jy ! Component: 900 - total flux cleaned = 0.00124901 Jy ! Component: 950 - total flux cleaned = 0.00120767 Jy ! Component: 1000 - total flux cleaned = 0.00128887 Jy ! Component: 1050 - total flux cleaned = 0.0012687 Jy ! Component: 1100 - total flux cleaned = 0.00132769 Jy ! Component: 1150 - total flux cleaned = 0.00134687 Jy ! Component: 1200 - total flux cleaned = 0.00142338 Jy ! Component: 1250 - total flux cleaned = 0.0014422 Jy ! Component: 1300 - total flux cleaned = 0.00149757 Jy ! Component: 1350 - total flux cleaned = 0.00151535 Jy ! Component: 1400 - total flux cleaned = 0.00160456 Jy ! Component: 1450 - total flux cleaned = 0.00162189 Jy ! Component: 1500 - total flux cleaned = 0.0016744 Jy ! Component: 1550 - total flux cleaned = 0.00177806 Jy ! Component: 1600 - total flux cleaned = 0.00179536 Jy ! Component: 1650 - total flux cleaned = 0.00187985 Jy ! Component: 1700 - total flux cleaned = 0.00197964 Jy ! Component: 1750 - total flux cleaned = 0.00197937 Jy ! Component: 1800 - total flux cleaned = 0.00207703 Jy ! Component: 1850 - total flux cleaned = 0.0021412 Jy ! Component: 1900 - total flux cleaned = 0.00220493 Jy ! Component: 1950 - total flux cleaned = 0.00229919 Jy ! Component: 2000 - total flux cleaned = 0.00229906 Jy ! Component: 2050 - total flux cleaned = 0.00234549 Jy ! Component: 2100 - total flux cleaned = 0.00237623 Jy ! Component: 2150 - total flux cleaned = 0.00243674 Jy ! Component: 2200 - total flux cleaned = 0.00245174 Jy ! Component: 2250 - total flux cleaned = 0.00246668 Jy ! Component: 2300 - total flux cleaned = 0.00249612 Jy ! Component: 2350 - total flux cleaned = 0.00252518 Jy ! Component: 2400 - total flux cleaned = 0.00255412 Jy ! Component: 2450 - total flux cleaned = 0.00262564 Jy ! Component: 2500 - total flux cleaned = 0.00262557 Jy ! Component: 2550 - total flux cleaned = 0.00266767 Jy ! Component: 2600 - total flux cleaned = 0.00265363 Jy ! Component: 2650 - total flux cleaned = 0.00269495 Jy ! Component: 2700 - total flux cleaned = 0.00270866 Jy ! Component: 2750 - total flux cleaned = 0.0027358 Jy ! Component: 2800 - total flux cleaned = 0.00274925 Jy ! Component: 2850 - total flux cleaned = 0.00274933 Jy ! Component: 2900 - total flux cleaned = 0.00273617 Jy ! Component: 2950 - total flux cleaned = 0.00277539 Jy ! Component: 3000 - total flux cleaned = 0.0027624 Jy ! Component: 3050 - total flux cleaned = 0.00281396 Jy ! Component: 3100 - total flux cleaned = 0.00281415 Jy ! Component: 3150 - total flux cleaned = 0.00281418 Jy ! Component: 3200 - total flux cleaned = 0.00280148 Jy ! Component: 3250 - total flux cleaned = 0.00283919 Jy ! Component: 3300 - total flux cleaned = 0.00286396 Jy ! Component: 3350 - total flux cleaned = 0.00290097 Jy ! Component: 3400 - total flux cleaned = 0.00292549 Jy ! Component: 3450 - total flux cleaned = 0.00294977 Jy ! Component: 3500 - total flux cleaned = 0.00297392 Jy ! Component: 3550 - total flux cleaned = 0.00302182 Jy ! Component: 3600 - total flux cleaned = 0.00308105 Jy ! Component: 3650 - total flux cleaned = 0.00312837 Jy ! Component: 3700 - total flux cleaned = 0.0031166 Jy ! Component: 3750 - total flux cleaned = 0.00317478 Jy ! Component: 3800 - total flux cleaned = 0.00318641 Jy ! Component: 3850 - total flux cleaned = 0.0032438 Jy ! Component: 3900 - total flux cleaned = 0.00330079 Jy ! Component: 3950 - total flux cleaned = 0.00331215 Jy ! Component: 4000 - total flux cleaned = 0.00336847 Jy ! Component: 4050 - total flux cleaned = 0.00340202 Jy ! Total flux subtracted in 4096 components = 0.00342412 Jy ! Clean residual min=-0.000681 max=0.000629 Jy/beam ! Clean residual mean=-0.000004 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.217204 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 572 components and 0.217204 Jy ![Exited script file: muppet] wmap "J0145+5810_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 5.093 at -3.725 degrees (North through East) ! Clean map min=-0.0013578 max=0.052273 Jy/beam ! Writing clean map to FITS file: J0145+5810_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0522733 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213801 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22702 1.22702 2.45404 4.90807 9.81615 19.6323 39.2646 78.5292 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 5.093 at -3.725 degrees (North through East) ! Clean map min=-0.0013578 max=0.052273 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0145+5810_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:54:49 2019