! Started logfile: J0144-3938_S_2017_04_28_pus_uvs.log on Thu May 2 16:15:13 2019 obs J0144-3938_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0144-3938_S_2017_04_28_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782066 visibilities/baseline/integration-bin. ! Found source: J0144-3938 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 16048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0144-3938_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 666 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.961616Jy sigma=0.036582 ! Fit after self-cal, rms=0.908587Jy sigma=0.036481 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.323 mas, bmaj=8.219 mas, bpa=-8.831 degrees ! Estimated noise=1181.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420426 Jy ! Component: 100 - total flux cleaned = 0.0483691 Jy ! Total flux subtracted in 100 components = 0.0483691 Jy ! Clean residual min=-0.025061 max=0.024126 Jy/beam ! Clean residual mean=0.000478 rms=0.009032 Jy/beam ! Combined flux in latest and established models = 0.0483691 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0483691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185924Jy sigma=0.001783 ! Fit after self-cal, rms=0.185765Jy sigma=0.001769 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=10.04 mas, bpa=-6.738 degrees ! Estimated noise=709.481 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397167 Jy ! Component: 100 - total flux cleaned = 0.00328682 Jy ! Component: 150 - total flux cleaned = 0.00243966 Jy ! Component: 200 - total flux cleaned = 0.00197565 Jy ! Total flux subtracted in 200 components = 0.00197565 Jy ! Clean residual min=-0.024714 max=0.025097 Jy/beam ! Clean residual mean=0.001530 rms=0.008620 Jy/beam ! Combined flux in latest and established models = 0.0503447 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 10 components and 0.0503447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183064Jy sigma=0.001869 ! Fit after self-cal, rms=0.182904Jy sigma=0.001868 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.68 HN 0.78 KP 0.63 ! LA 0.65 MK 0.79 NL 0.69 OV 0.66 ! PT 0.68 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.64 HN 0.81 KP 0.62 ! LA 0.67 MK 0.81 NL 0.77 OV 0.68 ! PT 0.64 SC 1.17 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.64 HN 0.92 KP 0.64 ! LA 0.61 MK 0.81 NL 0.75 OV 0.62 ! PT 0.66 SC 1.09 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.78 HN 1.00* KP 1.00* ! LA 27.15 MK 0.77 NL 1.00* OV 1.00* ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.182904Jy sigma=0.001868 ! Fit after self-cal, rms=0.822605Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.868 mas, bpa=-4.037 degrees ! Estimated noise=711.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125105 Jy ! Component: 100 - total flux cleaned = 0.00137242 Jy ! Component: 150 - total flux cleaned = 0.00142224 Jy ! Component: 200 - total flux cleaned = 0.00142403 Jy ! Total flux subtracted in 200 components = 0.00142403 Jy ! Clean residual min=-0.002990 max=0.002700 Jy/beam ! Clean residual mean=0.000000 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0517687 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 17 components and 0.0517687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.822611Jy sigma=0.000667 ! Fit after self-cal, rms=0.823024Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.823024Jy sigma=0.000661 ! Fit after self-cal, rms=1.007180Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=8.964 mas, bpa=-4.712 degrees ! Estimated noise=707.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015804 Jy ! Component: 100 - total flux cleaned = 0.00163268 Jy ! Component: 150 - total flux cleaned = 0.00159014 Jy ! Component: 200 - total flux cleaned = 0.00155101 Jy ! Total flux subtracted in 200 components = 0.00155101 Jy ! Clean residual min=-0.002714 max=0.002588 Jy/beam ! Clean residual mean=0.000003 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0533197 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.0533198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.007173Jy sigma=0.000659 ! Fit after self-cal, rms=1.007244Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320364 Jy ! Component: 100 - total flux cleaned = 0.000279979 Jy ! Component: 150 - total flux cleaned = 0.000208631 Jy ! Component: 200 - total flux cleaned = 0.000174116 Jy ! Total flux subtracted in 200 components = 0.000174116 Jy ! Clean residual min=-0.002517 max=0.002519 Jy/beam ! Clean residual mean=0.000004 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0534939 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.0534939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.007261Jy sigma=0.000659 ! Fit after self-cal, rms=1.007272Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.007272Jy sigma=0.000659 ! Fit after self-cal, rms=0.107057Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=8.952 mas, bpa=-4.716 degrees ! Estimated noise=705.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000659348 Jy ! Component: 100 - total flux cleaned = 0.000633841 Jy ! Component: 150 - total flux cleaned = 0.000586314 Jy ! Component: 200 - total flux cleaned = 0.000565082 Jy ! Total flux subtracted in 200 components = 0.000565082 Jy ! Clean residual min=-0.001555 max=0.001634 Jy/beam ! Clean residual mean=0.000010 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0540589 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.054059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107032Jy sigma=0.000655 ! Fit after self-cal, rms=0.107038Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.45637e-05 Jy ! Component: 100 - total flux cleaned = -4.47107e-05 Jy ! Component: 150 - total flux cleaned = -6.35327e-05 Jy ! Component: 200 - total flux cleaned = -6.38305e-05 Jy ! Total flux subtracted in 200 components = -6.38305e-05 Jy ! Clean residual min=-0.001641 max=0.001687 Jy/beam ! Clean residual mean=0.000008 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0539951 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.0539951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107027Jy sigma=0.000655 ! Fit after self-cal, rms=0.107033Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107033Jy sigma=0.000655 ! Fit after self-cal, rms=0.106818Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.102 mas, bmaj=30.83 mas, bpa=2.53 degrees ! Estimated noise=817.474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00048484 Jy ! Component: 100 - total flux cleaned = 0.00055537 Jy ! Component: 150 - total flux cleaned = 0.000555844 Jy ! Component: 200 - total flux cleaned = 0.000556352 Jy ! Total flux subtracted in 200 components = 0.000556352 Jy ! Clean residual min=-0.001314 max=0.001571 Jy/beam ! Clean residual mean=0.000018 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0545515 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 50 components and 0.0545515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106816Jy sigma=0.000655 ! Fit after self-cal, rms=0.106800Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.84187e-06 Jy ! Component: 100 - total flux cleaned = -9.68584e-06 Jy ! Component: 150 - total flux cleaned = -9.48075e-06 Jy ! Component: 200 - total flux cleaned = -9.34143e-06 Jy ! Total flux subtracted in 200 components = -9.34143e-06 Jy ! Clean residual min=-0.001303 max=0.001561 Jy/beam ! Clean residual mean=0.000017 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0545421 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.0545421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106800Jy sigma=0.000655 ! Fit after self-cal, rms=0.106798Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=8.883 mas, bpa=-4.785 degrees ! Estimated noise=704.113 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 8.883 at -4.785 degrees (North through East) ! Clean map min=-0.0019307 max=0.060129 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=7.106 mas, bpa=-4.798 degrees ! Estimated noise=1311.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469751 Jy ! Component: 100 - total flux cleaned = 0.0542893 Jy ! Component: 150 - total flux cleaned = 0.0542771 Jy ! Component: 200 - total flux cleaned = 0.0542661 Jy ! Total flux subtracted in 200 components = 0.0542661 Jy ! Clean residual min=-0.004056 max=0.003774 Jy/beam ! Clean residual mean=0.000001 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.0542662 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0542662 Jy ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=8.883 mas, bpa=-4.785 degrees ! Estimated noise=704.113 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100325 Jy ! Component: 100 - total flux cleaned = 0.000710249 Jy ! Component: 150 - total flux cleaned = 0.000527539 Jy ! Component: 200 - total flux cleaned = 0.000424122 Jy ! Total flux subtracted in 200 components = 0.000424122 Jy ! Clean residual min=-0.001652 max=0.001630 Jy/beam ! Clean residual mean=0.000010 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0546903 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.0546903 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.102 mas, bmaj=30.83 mas, bpa=2.53 degrees ! Estimated noise=817.474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217143 Jy ! Component: 100 - total flux cleaned = -0.000273277 Jy ! Component: 150 - total flux cleaned = -0.000324737 Jy ! Component: 200 - total flux cleaned = -0.000383602 Jy ! Total flux subtracted in 200 components = -0.000383602 Jy ! Clean residual min=-0.001394 max=0.001552 Jy/beam ! Clean residual mean=0.000015 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0543067 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.29857e-05 Jy ! Component: 100 - total flux cleaned = -8.28856e-05 Jy ! Component: 150 - total flux cleaned = -0.000110564 Jy ! Component: 200 - total flux cleaned = -0.000137096 Jy ! Total flux subtracted in 200 components = -0.000137096 Jy ! Clean residual min=-0.001414 max=0.001545 Jy/beam ! Clean residual mean=0.000014 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0541696 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.0541696 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=8.883 mas, bpa=-4.785 degrees ! Estimated noise=704.113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.317e-05 Jy ! Component: 100 - total flux cleaned = -4.36166e-05 Jy ! Component: 150 - total flux cleaned = -0.000141162 Jy ! Component: 200 - total flux cleaned = -0.000169839 Jy ! Total flux subtracted in 200 components = -0.000169839 Jy ! Clean residual min=-0.001621 max=0.001576 Jy/beam ! Clean residual mean=0.000007 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0539997 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.0539997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106769Jy sigma=0.000654 ! Fit after self-cal, rms=0.106834Jy sigma=0.000654 wmodel J0144-3938_S_2017_04_28_pus_map.mod ! Writing 53 model components to file: J0144-3938_S_2017_04_28_pus_map.mod wobs J0144-3938_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0144-3938_S_2017_04_28_pus_uvs.fits wwins J0144-3938_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0144-3938_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119805 Jy ! Component: 100 - total flux cleaned = 0.000122046 Jy ! Component: 150 - total flux cleaned = -6.51204e-06 Jy ! Component: 200 - total flux cleaned = -7.9146e-05 Jy ! Component: 250 - total flux cleaned = -0.000125267 Jy ! Component: 300 - total flux cleaned = -0.000125071 Jy ! Component: 350 - total flux cleaned = -0.000103018 Jy ! Component: 400 - total flux cleaned = -0.000102876 Jy ! Component: 450 - total flux cleaned = -4.0578e-05 Jy ! Component: 500 - total flux cleaned = -0.000162148 Jy ! Component: 550 - total flux cleaned = -0.000221262 Jy ! Component: 600 - total flux cleaned = -0.000279488 Jy ! Component: 650 - total flux cleaned = -0.000374445 Jy ! Component: 700 - total flux cleaned = -0.00044906 Jy ! Component: 750 - total flux cleaned = -0.00054071 Jy ! Component: 800 - total flux cleaned = -0.000631184 Jy ! Component: 850 - total flux cleaned = -0.000720144 Jy ! Component: 900 - total flux cleaned = -0.000807304 Jy ! Component: 950 - total flux cleaned = -0.000892697 Jy ! Component: 1000 - total flux cleaned = -0.000909793 Jy ! Component: 1050 - total flux cleaned = -0.000959672 Jy ! Component: 1100 - total flux cleaned = -0.000992486 Jy ! Component: 1150 - total flux cleaned = -0.00102472 Jy ! Component: 1200 - total flux cleaned = -0.00108842 Jy ! Component: 1250 - total flux cleaned = -0.00113551 Jy ! Component: 1300 - total flux cleaned = -0.00116665 Jy ! Component: 1350 - total flux cleaned = -0.00119722 Jy ! Component: 1400 - total flux cleaned = -0.00121214 Jy ! Component: 1450 - total flux cleaned = -0.00116717 Jy ! Component: 1500 - total flux cleaned = -0.00119688 Jy ! Component: 1550 - total flux cleaned = -0.00118221 Jy ! Component: 1600 - total flux cleaned = -0.00121137 Jy ! Component: 1650 - total flux cleaned = -0.00118267 Jy ! Component: 1700 - total flux cleaned = -0.00118267 Jy ! Component: 1750 - total flux cleaned = -0.00118269 Jy ! Component: 1800 - total flux cleaned = -0.00121077 Jy ! Component: 1850 - total flux cleaned = -0.00121094 Jy ! Component: 1900 - total flux cleaned = -0.00125225 Jy ! Component: 1950 - total flux cleaned = -0.00127968 Jy ! Component: 2000 - total flux cleaned = -0.00130671 Jy ! Component: 2050 - total flux cleaned = -0.00132031 Jy ! Component: 2100 - total flux cleaned = -0.00140022 Jy ! Component: 2150 - total flux cleaned = -0.00138701 Jy ! Component: 2200 - total flux cleaned = -0.0014788 Jy ! Component: 2250 - total flux cleaned = -0.00150474 Jy ! Component: 2300 - total flux cleaned = -0.00155617 Jy ! Component: 2350 - total flux cleaned = -0.00154341 Jy ! Component: 2400 - total flux cleaned = -0.00159423 Jy ! Component: 2450 - total flux cleaned = -0.00163205 Jy ! Component: 2500 - total flux cleaned = -0.00168227 Jy ! Component: 2550 - total flux cleaned = -0.00170715 Jy ! Component: 2600 - total flux cleaned = -0.00170716 Jy ! Component: 2650 - total flux cleaned = -0.00175631 Jy ! Component: 2700 - total flux cleaned = -0.00180493 Jy ! Component: 2750 - total flux cleaned = -0.0018169 Jy ! Component: 2800 - total flux cleaned = -0.00181688 Jy ! Component: 2850 - total flux cleaned = -0.00184082 Jy ! Component: 2900 - total flux cleaned = -0.00187642 Jy ! Component: 2950 - total flux cleaned = -0.00188818 Jy ! Component: 3000 - total flux cleaned = -0.00192346 Jy ! Component: 3050 - total flux cleaned = -0.0019934 Jy ! Component: 3100 - total flux cleaned = -0.00198171 Jy ! Component: 3150 - total flux cleaned = -0.00198165 Jy ! Component: 3200 - total flux cleaned = -0.00206174 Jy ! Component: 3250 - total flux cleaned = -0.002073 Jy ! Component: 3300 - total flux cleaned = -0.00210697 Jy ! Component: 3350 - total flux cleaned = -0.00212941 Jy ! Component: 3400 - total flux cleaned = -0.00217415 Jy ! Component: 3450 - total flux cleaned = -0.00222969 Jy ! Component: 3500 - total flux cleaned = -0.00226281 Jy ! Component: 3550 - total flux cleaned = -0.00229573 Jy ! Component: 3600 - total flux cleaned = -0.00231757 Jy ! Component: 3650 - total flux cleaned = -0.00235027 Jy ! Component: 3700 - total flux cleaned = -0.0024369 Jy ! Component: 3750 - total flux cleaned = -0.00242614 Jy ! Component: 3800 - total flux cleaned = -0.00250125 Jy ! Component: 3850 - total flux cleaned = -0.0025439 Jy ! Component: 3900 - total flux cleaned = -0.00259703 Jy ! Component: 3950 - total flux cleaned = -0.002597 Jy ! Component: 4000 - total flux cleaned = -0.00263913 Jy ! Component: 4050 - total flux cleaned = -0.00273331 Jy ! Total flux subtracted in 4096 components = -0.00280621 Jy ! Clean residual min=-0.000616 max=0.000537 Jy/beam ! Clean residual mean=-0.000002 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.0511935 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 297 components and 0.0511935 Jy ![Exited script file: muppet] wmap "J0144-3938_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 8.883 at -4.785 degrees (North through East) ! Clean map min=-0.0013567 max=0.058949 Jy/beam ! Writing clean map to FITS file: J0144-3938_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0589495 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000178967 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.910781 0.910781 1.82156 3.64313 7.28625 14.5725 29.145 58.29 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 8.883 at -4.785 degrees (North through East) ! Clean map min=-0.0013567 max=0.058949 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0144-3938_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:15:18 2019