! Started logfile: J0144+2705_S_2017_07_16_pus_uvs.log on Thu May 9 10:57:43 2019 obs J0144+2705_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0144+2705_S_2017_07_16_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.659722 visibilities/baseline/integration-bin. ! Found source: J0144+2705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 13300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0144+2705_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 792 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911416Jy sigma=0.009015 ! Fit after self-cal, rms=0.893298Jy sigma=0.008846 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=5.296 mas, bpa=-5.703 degrees ! Estimated noise=1014.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0781034 Jy ! Component: 100 - total flux cleaned = 0.100087 Jy ! Total flux subtracted in 100 components = 0.100087 Jy ! Clean residual min=-0.007024 max=0.011287 Jy/beam ! Clean residual mean=-0.000006 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 0.100086 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.100086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077900Jy sigma=0.000733 ! Fit after self-cal, rms=0.077871Jy sigma=0.000732 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119568 Jy ! Component: 100 - total flux cleaned = 0.0187192 Jy ! Total flux subtracted in 100 components = 0.0187192 Jy ! Clean residual min=-0.005903 max=0.011011 Jy/beam ! Clean residual mean=-0.000004 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.118806 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.118806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074961Jy sigma=0.000702 ! Fit after self-cal, rms=0.074949Jy sigma=0.000702 ! Inverting map ! Added new window around map position (-4.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00940567 Jy ! Component: 100 - total flux cleaned = 0.0145095 Jy ! Total flux subtracted in 100 components = 0.0145095 Jy ! Clean residual min=-0.005424 max=0.008652 Jy/beam ! Clean residual mean=-0.000002 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.133315 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 37 components and 0.133315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073159Jy sigma=0.000682 ! Fit after self-cal, rms=0.073052Jy sigma=0.000681 ! Inverting map ! Added new window around map position (-9.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781767 Jy ! Component: 100 - total flux cleaned = 0.0126952 Jy ! Total flux subtracted in 100 components = 0.0126952 Jy ! Clean residual min=-0.004423 max=0.004203 Jy/beam ! Clean residual mean=-0.000001 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.14601 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.14601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071920Jy sigma=0.000669 ! Fit after self-cal, rms=0.071830Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=6.276 mas, bpa=-4.497 degrees ! Estimated noise=726.191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0068434 Jy ! Component: 100 - total flux cleaned = 0.011403 Jy ! Component: 150 - total flux cleaned = 0.0147072 Jy ! Component: 200 - total flux cleaned = 0.017181 Jy ! Total flux subtracted in 200 components = 0.017181 Jy ! Clean residual min=-0.003393 max=0.003666 Jy/beam ! Clean residual mean=-0.000003 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.163191 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 85 components and 0.163191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071048Jy sigma=0.000659 ! Fit after self-cal, rms=0.070978Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.00 KP 0.99 ! LA 0.97 MK 1.03 NL 0.91 OV 1.02 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.03 KP 0.97 ! LA 0.95 MK 1.02 NL 1.10 OV 1.01 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.99 KP 0.94 ! LA 0.99 MK 1.03 NL 1.13 OV 0.94 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 4. ! A total of 288 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.05 KP 1.00* ! LA 0.84 MK 1.64 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.070978Jy sigma=0.000659 ! Fit after self-cal, rms=0.070169Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=6.277 mas, bpa=-3.798 degrees ! Estimated noise=732.278 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305664 Jy ! Component: 100 - total flux cleaned = 0.00480282 Jy ! Component: 150 - total flux cleaned = 0.00597882 Jy ! Component: 200 - total flux cleaned = 0.0065749 Jy ! Total flux subtracted in 200 components = 0.0065749 Jy ! Clean residual min=-0.002174 max=0.002472 Jy/beam ! Clean residual mean=-0.000002 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.169766 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.169766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070028Jy sigma=0.000654 ! Fit after self-cal, rms=0.070013Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070013Jy sigma=0.000654 ! Fit after self-cal, rms=0.069481Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=6.271 mas, bpa=-3.928 degrees ! Estimated noise=733.338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121529 Jy ! Component: 100 - total flux cleaned = 0.00168081 Jy ! Component: 150 - total flux cleaned = 0.00201027 Jy ! Component: 200 - total flux cleaned = 0.00226713 Jy ! Total flux subtracted in 200 components = 0.00226713 Jy ! Clean residual min=-0.001976 max=0.002068 Jy/beam ! Clean residual mean=-0.000000 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.172033 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 0.172033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069449Jy sigma=0.000648 ! Fit after self-cal, rms=0.069461Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-118, -89.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000913726 Jy ! Component: 100 - total flux cleaned = 0.00125709 Jy ! Component: 150 - total flux cleaned = 0.0016928 Jy ! Component: 200 - total flux cleaned = 0.00191995 Jy ! Total flux subtracted in 200 components = 0.00191995 Jy ! Clean residual min=-0.001929 max=0.001706 Jy/beam ! Clean residual mean=-0.000000 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.173953 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 0.173953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069410Jy sigma=0.000647 ! Fit after self-cal, rms=0.069406Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069406Jy sigma=0.000647 ! Fit after self-cal, rms=0.069368Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=6.269 mas, bpa=-3.909 degrees ! Estimated noise=733.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000499158 Jy ! Component: 100 - total flux cleaned = 0.000727375 Jy ! Component: 150 - total flux cleaned = 0.000910104 Jy ! Component: 200 - total flux cleaned = 0.00107936 Jy ! Total flux subtracted in 200 components = 0.00107936 Jy ! Clean residual min=-0.001847 max=0.001653 Jy/beam ! Clean residual mean=-0.000000 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.175033 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 145 components and 0.175033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069352Jy sigma=0.000647 ! Fit after self-cal, rms=0.069351Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302197 Jy ! Component: 100 - total flux cleaned = 0.000418929 Jy ! Component: 150 - total flux cleaned = 0.000436923 Jy ! Component: 200 - total flux cleaned = 0.000490702 Jy ! Total flux subtracted in 200 components = 0.000490702 Jy ! Clean residual min=-0.001813 max=0.001626 Jy/beam ! Clean residual mean=-0.000000 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.175523 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 152 components and 0.175523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069341Jy sigma=0.000647 ! Fit after self-cal, rms=0.069341Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069341Jy sigma=0.000647 ! Fit after self-cal, rms=0.069356Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.682 mas, bmaj=9.485 mas, bpa=-8.589 degrees ! Estimated noise=946.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525879 Jy ! Component: 100 - total flux cleaned = 0.000914471 Jy ! Component: 150 - total flux cleaned = 0.00126286 Jy ! Component: 200 - total flux cleaned = 0.00155839 Jy ! Total flux subtracted in 200 components = 0.00155839 Jy ! Clean residual min=-0.002136 max=0.001628 Jy/beam ! Clean residual mean=-0.000000 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.177082 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 177 components and 0.177082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069355Jy sigma=0.000647 ! Fit after self-cal, rms=0.069354Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232795 Jy ! Component: 100 - total flux cleaned = 0.000454067 Jy ! Component: 150 - total flux cleaned = 0.00061311 Jy ! Component: 200 - total flux cleaned = 0.000751663 Jy ! Total flux subtracted in 200 components = 0.000751663 Jy ! Clean residual min=-0.002074 max=0.001570 Jy/beam ! Clean residual mean=-0.000000 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.177833 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 189 components and 0.177833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069357Jy sigma=0.000647 ! Fit after self-cal, rms=0.069357Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=6.271 mas, bpa=-3.906 degrees ! Estimated noise=734.073 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.083 x 6.271 at -3.906 degrees (North through East) ! Clean map min=-0.0016444 max=0.10584 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=5.282 mas, bpa=-4.918 degrees ! Estimated noise=1031.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785766 Jy ! Component: 100 - total flux cleaned = 0.101486 Jy ! Component: 150 - total flux cleaned = 0.115368 Jy ! Component: 200 - total flux cleaned = 0.125635 Jy ! Total flux subtracted in 200 components = 0.125635 Jy ! Clean residual min=-0.004994 max=0.005974 Jy/beam ! Clean residual mean=-0.000003 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.125635 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.125635 Jy ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=6.271 mas, bpa=-3.906 degrees ! Estimated noise=734.073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120294 Jy ! Component: 100 - total flux cleaned = 0.0201771 Jy ! Component: 150 - total flux cleaned = 0.0260149 Jy ! Component: 200 - total flux cleaned = 0.0303853 Jy ! Total flux subtracted in 200 components = 0.0303853 Jy ! Clean residual min=-0.002571 max=0.002719 Jy/beam ! Clean residual mean=-0.000002 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.15602 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 53 components and 0.15602 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.682 mas, bmaj=9.485 mas, bpa=-8.589 degrees ! Estimated noise=946.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645909 Jy ! Component: 100 - total flux cleaned = 0.0102935 Jy ! Component: 150 - total flux cleaned = 0.0129986 Jy ! Component: 200 - total flux cleaned = 0.0150395 Jy ! Total flux subtracted in 200 components = 0.0150395 Jy ! Clean residual min=-0.002310 max=0.002137 Jy/beam ! Clean residual mean=-0.000001 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.17106 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157427 Jy ! Component: 100 - total flux cleaned = 0.00280069 Jy ! Component: 150 - total flux cleaned = 0.0036942 Jy ! Component: 200 - total flux cleaned = 0.00417548 Jy ! Total flux subtracted in 200 components = 0.00417548 Jy ! Clean residual min=-0.002131 max=0.001775 Jy/beam ! Clean residual mean=-0.000000 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.175235 Jy ! Adding 118 model components to the UV plane model. ! The established model now contains 158 components and 0.175235 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=6.271 mas, bpa=-3.906 degrees ! Estimated noise=734.073 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.51855e-05 Jy ! Component: 100 - total flux cleaned = 0.000222302 Jy ! Component: 150 - total flux cleaned = 0.000365619 Jy ! Component: 200 - total flux cleaned = 0.000496289 Jy ! Total flux subtracted in 200 components = 0.000496289 Jy ! Clean residual min=-0.001739 max=0.001632 Jy/beam ! Clean residual mean=-0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.175731 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 179 components and 0.175731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069398Jy sigma=0.000647 ! Fit after self-cal, rms=0.069385Jy sigma=0.000647 wmodel J0144+2705_S_2017_07_16_pus_map.mod ! Writing 179 model components to file: J0144+2705_S_2017_07_16_pus_map.mod wobs J0144+2705_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0144+2705_S_2017_07_16_pus_uvs.fits wwins J0144+2705_S_2017_07_16_pus_map.win ! wwins: Wrote 5 windows to J0144+2705_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000563668 Jy ! Component: 100 - total flux cleaned = -0.000993189 Jy ! Component: 150 - total flux cleaned = -0.00128893 Jy ! Component: 200 - total flux cleaned = -0.00141674 Jy ! Component: 250 - total flux cleaned = -0.00156513 Jy ! Component: 300 - total flux cleaned = -0.00156446 Jy ! Component: 350 - total flux cleaned = -0.00154143 Jy ! Component: 400 - total flux cleaned = -0.00149634 Jy ! Component: 450 - total flux cleaned = -0.00147472 Jy ! Component: 500 - total flux cleaned = -0.0013891 Jy ! Component: 550 - total flux cleaned = -0.00136848 Jy ! Component: 600 - total flux cleaned = -0.00136856 Jy ! Component: 650 - total flux cleaned = -0.00130738 Jy ! Component: 700 - total flux cleaned = -0.00124779 Jy ! Component: 750 - total flux cleaned = -0.00115084 Jy ! Component: 800 - total flux cleaned = -0.00115042 Jy ! Component: 850 - total flux cleaned = -0.000962825 Jy ! Component: 900 - total flux cleaned = -0.000871057 Jy ! Component: 950 - total flux cleaned = -0.00074394 Jy ! Component: 1000 - total flux cleaned = -0.000672315 Jy ! Component: 1050 - total flux cleaned = -0.000566364 Jy ! Component: 1100 - total flux cleaned = -0.000531387 Jy ! Component: 1150 - total flux cleaned = -0.000462548 Jy ! Component: 1200 - total flux cleaned = -0.000411367 Jy ! Component: 1250 - total flux cleaned = -0.000360984 Jy ! Component: 1300 - total flux cleaned = -0.000294688 Jy ! Component: 1350 - total flux cleaned = -0.000311075 Jy ! Component: 1400 - total flux cleaned = -0.00021445 Jy ! Component: 1450 - total flux cleaned = -0.000198522 Jy ! Component: 1500 - total flux cleaned = -0.00015157 Jy ! Component: 1550 - total flux cleaned = -0.000167 Jy ! Component: 1600 - total flux cleaned = -0.000167169 Jy ! Component: 1650 - total flux cleaned = -0.00018227 Jy ! Component: 1700 - total flux cleaned = -0.000211931 Jy ! Component: 1750 - total flux cleaned = -0.000152534 Jy ! Component: 1800 - total flux cleaned = -0.000152489 Jy ! Component: 1850 - total flux cleaned = -0.00013781 Jy ! Component: 1900 - total flux cleaned = -0.000123438 Jy ! Component: 1950 - total flux cleaned = -6.68318e-05 Jy ! Component: 2000 - total flux cleaned = -8.08683e-05 Jy ! Component: 2050 - total flux cleaned = -3.91734e-05 Jy ! Component: 2100 - total flux cleaned = -1.15385e-05 Jy ! Component: 2150 - total flux cleaned = 4.28893e-05 Jy ! Component: 2200 - total flux cleaned = 5.65861e-05 Jy ! Component: 2250 - total flux cleaned = 9.64523e-05 Jy ! Component: 2300 - total flux cleaned = 9.678e-05 Jy ! Component: 2350 - total flux cleaned = 0.000122862 Jy ! Component: 2400 - total flux cleaned = 0.000135786 Jy ! Component: 2450 - total flux cleaned = 0.000174015 Jy ! Component: 2500 - total flux cleaned = 0.000186457 Jy ! Component: 2550 - total flux cleaned = 0.000136215 Jy ! Component: 2600 - total flux cleaned = 0.000161011 Jy ! Component: 2650 - total flux cleaned = 0.000136518 Jy ! Component: 2700 - total flux cleaned = 0.000185297 Jy ! Component: 2750 - total flux cleaned = 0.000125163 Jy ! Component: 2800 - total flux cleaned = 0.000161158 Jy ! Component: 2850 - total flux cleaned = 0.000184984 Jy ! Component: 2900 - total flux cleaned = 0.000173248 Jy ! Component: 2950 - total flux cleaned = 0.000173329 Jy ! Component: 3000 - total flux cleaned = 0.00015037 Jy ! Component: 3050 - total flux cleaned = 0.000173337 Jy ! Component: 3100 - total flux cleaned = 0.00015052 Jy ! Component: 3150 - total flux cleaned = 0.000150496 Jy ! Component: 3200 - total flux cleaned = 0.000139225 Jy ! Component: 3250 - total flux cleaned = 0.000172606 Jy ! Component: 3300 - total flux cleaned = 0.000194552 Jy ! Component: 3350 - total flux cleaned = 0.000183463 Jy ! Component: 3400 - total flux cleaned = 0.000140013 Jy ! Component: 3450 - total flux cleaned = 0.000139879 Jy ! Component: 3500 - total flux cleaned = 0.000118446 Jy ! Component: 3550 - total flux cleaned = 8.64899e-05 Jy ! Component: 3600 - total flux cleaned = 0.000128644 Jy ! Component: 3650 - total flux cleaned = 9.71537e-05 Jy ! Component: 3700 - total flux cleaned = 8.67379e-05 Jy ! Component: 3750 - total flux cleaned = 5.5718e-05 Jy ! Component: 3800 - total flux cleaned = 9.6994e-05 Jy ! Component: 3850 - total flux cleaned = 7.65503e-05 Jy ! Component: 3900 - total flux cleaned = 0.000127249 Jy ! Component: 3950 - total flux cleaned = 0.000117111 Jy ! Component: 4000 - total flux cleaned = 0.00014709 Jy ! Component: 4050 - total flux cleaned = 9.73125e-05 Jy ! Total flux subtracted in 4096 components = 0.000107217 Jy ! Clean residual min=-0.000583 max=0.000625 Jy/beam ! Clean residual mean=0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.175838 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 438 components and 0.175839 Jy ![Exited script file: muppet] wmap "J0144+2705_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.083 x 6.271 at -3.906 degrees (North through East) ! Clean map min=-0.0012323 max=0.10632 Jy/beam ! Writing clean map to FITS file: J0144+2705_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106315 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000173123 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.488517 0.488517 0.977034 1.95407 3.90813 7.81627 15.6325 31.2651 62.5301 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.083 x 6.271 at -3.906 degrees (North through East) ! Clean map min=-0.0012323 max=0.10632 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0144+2705_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:57:49 2019