! Started logfile: J0141-0928_S_2017_08_12_pus_uvs.log on Fri May 10 14:49:28 2019 obs J0141-0928_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0141-0928_S_2017_08_12_pus_uva.fits ! AN table 1: 27 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.279835 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0141-0928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0141-0928_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.618999Jy sigma=0.005226 ! Fit after self-cal, rms=0.603292Jy sigma=0.005152 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=6.919 mas, bpa=-4.694 degrees ! Estimated noise=3325.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.311188 Jy ! Component: 100 - total flux cleaned = 0.393336 Jy ! Total flux subtracted in 100 components = 0.393336 Jy ! Clean residual min=-0.020781 max=0.034622 Jy/beam ! Clean residual mean=0.000074 rms=0.006527 Jy/beam ! Combined flux in latest and established models = 0.393337 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.393337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099003Jy sigma=0.000803 ! Fit after self-cal, rms=0.098860Jy sigma=0.000802 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.871 mas, bmaj=7.469 mas, bpa=-4.376 degrees ! Estimated noise=2918.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.038155 Jy ! Component: 100 - total flux cleaned = 0.0561754 Jy ! Component: 150 - total flux cleaned = 0.0654577 Jy ! Component: 200 - total flux cleaned = 0.0703938 Jy ! Total flux subtracted in 200 components = 0.0703938 Jy ! Clean residual min=-0.012238 max=0.011661 Jy/beam ! Clean residual mean=0.000009 rms=0.002743 Jy/beam ! Combined flux in latest and established models = 0.46373 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.46373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083725Jy sigma=0.000680 ! Fit after self-cal, rms=0.083617Jy sigma=0.000679 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 0.95 KP 1.06 ! LA 1.00 MK 1.01 NL 0.90 OV 1.01 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.02 ! LA 0.98 MK 0.98 NL 1.02 OV 1.06 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 0.99 ! LA 1.01 MK 1.03 NL 1.00 OV 0.95 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.083617Jy sigma=0.000679 ! Fit after self-cal, rms=0.077760Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=7.451 mas, bpa=-4.366 degrees ! Estimated noise=2902.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103987 Jy ! Component: 100 - total flux cleaned = -0.000958962 Jy ! Component: 150 - total flux cleaned = -0.000957754 Jy ! Component: 200 - total flux cleaned = -0.000957919 Jy ! Total flux subtracted in 200 components = -0.000957919 Jy ! Clean residual min=-0.008308 max=0.009021 Jy/beam ! Clean residual mean=0.000010 rms=0.002199 Jy/beam ! Combined flux in latest and established models = 0.462772 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.462772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077589Jy sigma=0.000644 ! Fit after self-cal, rms=0.077559Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077559Jy sigma=0.000644 ! Fit after self-cal, rms=0.077495Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.876 mas, bmaj=7.452 mas, bpa=-4.313 degrees ! Estimated noise=2898.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00094965 Jy ! Component: 100 - total flux cleaned = -0.000882941 Jy ! Component: 150 - total flux cleaned = -0.000819624 Jy ! Component: 200 - total flux cleaned = -0.000758286 Jy ! Total flux subtracted in 200 components = -0.000758286 Jy ! Clean residual min=-0.008169 max=0.008638 Jy/beam ! Clean residual mean=0.000009 rms=0.002151 Jy/beam ! Combined flux in latest and established models = 0.462014 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 0.462014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077372Jy sigma=0.000643 ! Fit after self-cal, rms=0.077359Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.37631e-05 Jy ! Component: 100 - total flux cleaned = 0.00014163 Jy ! Component: 150 - total flux cleaned = 0.000200518 Jy ! Component: 200 - total flux cleaned = 0.00025449 Jy ! Total flux subtracted in 200 components = 0.00025449 Jy ! Clean residual min=-0.008141 max=0.008276 Jy/beam ! Clean residual mean=0.000009 rms=0.002121 Jy/beam ! Combined flux in latest and established models = 0.462269 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.462269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077265Jy sigma=0.000642 ! Fit after self-cal, rms=0.077253Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077253Jy sigma=0.000642 ! Fit after self-cal, rms=0.077184Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=7.453 mas, bpa=-4.248 degrees ! Estimated noise=2894.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101705 Jy ! Component: 100 - total flux cleaned = -0.00102775 Jy ! Component: 150 - total flux cleaned = -0.000973879 Jy ! Component: 200 - total flux cleaned = -0.000873795 Jy ! Total flux subtracted in 200 components = -0.000873795 Jy ! Clean residual min=-0.008017 max=0.008094 Jy/beam ! Clean residual mean=0.000008 rms=0.002081 Jy/beam ! Combined flux in latest and established models = 0.461395 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.461395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077095Jy sigma=0.000641 ! Fit after self-cal, rms=0.077085Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.93845e-05 Jy ! Component: 100 - total flux cleaned = 6.06845e-05 Jy ! Component: 150 - total flux cleaned = 0.000108563 Jy ! Component: 200 - total flux cleaned = 0.000155994 Jy ! Total flux subtracted in 200 components = 0.000155994 Jy ! Clean residual min=-0.007992 max=0.007939 Jy/beam ! Clean residual mean=0.000008 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 0.461551 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.461551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077017Jy sigma=0.000640 ! Fit after self-cal, rms=0.077008Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077008Jy sigma=0.000640 ! Fit after self-cal, rms=0.076968Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.74 mas, bmaj=14.31 mas, bpa=-7.976 degrees ! Estimated noise=3961.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213107 Jy ! Component: 100 - total flux cleaned = -0.000211524 Jy ! Component: 150 - total flux cleaned = -0.000276702 Jy ! Component: 200 - total flux cleaned = -0.000325175 Jy ! Total flux subtracted in 200 components = -0.000325175 Jy ! Clean residual min=-0.008698 max=0.011099 Jy/beam ! Clean residual mean=0.000017 rms=0.002912 Jy/beam ! Combined flux in latest and established models = 0.461226 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.461226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077000Jy sigma=0.000641 ! Fit after self-cal, rms=0.076894Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.65633e-05 Jy ! Component: 100 - total flux cleaned = -9.08204e-05 Jy ! Component: 150 - total flux cleaned = -0.000133776 Jy ! Component: 200 - total flux cleaned = -0.000134572 Jy ! Total flux subtracted in 200 components = -0.000134572 Jy ! Clean residual min=-0.008561 max=0.010830 Jy/beam ! Clean residual mean=0.000017 rms=0.002871 Jy/beam ! Combined flux in latest and established models = 0.461091 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.461091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076917Jy sigma=0.000640 ! Fit after self-cal, rms=0.076839Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=7.455 mas, bpa=-4.175 degrees ! Estimated noise=2891.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.88 x 7.455 at -4.175 degrees (North through East) ! Clean map min=-0.0084078 max=0.399 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=6.918 mas, bpa=-4.472 degrees ! Estimated noise=3274.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.305794 Jy ! Component: 100 - total flux cleaned = 0.387161 Jy ! Component: 150 - total flux cleaned = 0.423798 Jy ! Component: 200 - total flux cleaned = 0.441177 Jy ! Total flux subtracted in 200 components = 0.441177 Jy ! Clean residual min=-0.013212 max=0.013596 Jy/beam ! Clean residual mean=0.000022 rms=0.003270 Jy/beam ! Combined flux in latest and established models = 0.441177 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.441177 Jy ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=7.455 mas, bpa=-4.175 degrees ! Estimated noise=2891.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134494 Jy ! Component: 100 - total flux cleaned = 0.0178476 Jy ! Component: 150 - total flux cleaned = 0.02085 Jy ! Component: 200 - total flux cleaned = 0.0231734 Jy ! Total flux subtracted in 200 components = 0.0231734 Jy ! Clean residual min=-0.007704 max=0.007247 Jy/beam ! Clean residual mean=0.000007 rms=0.001930 Jy/beam ! Combined flux in latest and established models = 0.46435 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 0.46435 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.74 mas, bmaj=14.31 mas, bpa=-7.976 degrees ! Estimated noise=3961.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020478 Jy ! Component: 100 - total flux cleaned = 0.00219424 Jy ! Component: 150 - total flux cleaned = 0.00207579 Jy ! Component: 200 - total flux cleaned = 0.00186043 Jy ! Total flux subtracted in 200 components = 0.00186043 Jy ! Clean residual min=-0.007267 max=0.008712 Jy/beam ! Clean residual mean=0.000013 rms=0.002533 Jy/beam ! Combined flux in latest and established models = 0.466211 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.6679e-05 Jy ! Component: 100 - total flux cleaned = -0.000185964 Jy ! Component: 150 - total flux cleaned = -0.00035243 Jy ! Component: 200 - total flux cleaned = -0.000426443 Jy ! Total flux subtracted in 200 components = -0.000426443 Jy ! Clean residual min=-0.006969 max=0.008158 Jy/beam ! Clean residual mean=0.000013 rms=0.002462 Jy/beam ! Combined flux in latest and established models = 0.465784 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 53 components and 0.465784 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=7.455 mas, bpa=-4.175 degrees ! Estimated noise=2891.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000516375 Jy ! Component: 100 - total flux cleaned = -2.69733e-05 Jy ! Component: 150 - total flux cleaned = -0.000119244 Jy ! Component: 200 - total flux cleaned = -0.000122575 Jy ! Total flux subtracted in 200 components = -0.000122575 Jy ! Clean residual min=-0.006990 max=0.007352 Jy/beam ! Clean residual mean=0.000005 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.465662 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.465662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076182Jy sigma=0.000634 ! Fit after self-cal, rms=0.076100Jy sigma=0.000633 wmodel J0141-0928_S_2017_08_12_pus_map.mod ! Writing 68 model components to file: J0141-0928_S_2017_08_12_pus_map.mod wobs J0141-0928_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0141-0928_S_2017_08_12_pus_uvs.fits wwins J0141-0928_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0141-0928_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00252078 Jy ! Component: 100 - total flux cleaned = -0.00329551 Jy ! Component: 150 - total flux cleaned = -0.00381264 Jy ! Component: 200 - total flux cleaned = -0.0042042 Jy ! Component: 250 - total flux cleaned = -0.00456855 Jy ! Component: 300 - total flux cleaned = -0.00500157 Jy ! Component: 350 - total flux cleaned = -0.00516934 Jy ! Component: 400 - total flux cleaned = -0.005488 Jy ! Component: 450 - total flux cleaned = -0.00571801 Jy ! Component: 500 - total flux cleaned = -0.00608571 Jy ! Component: 550 - total flux cleaned = -0.00643663 Jy ! Component: 600 - total flux cleaned = -0.00643626 Jy ! Component: 650 - total flux cleaned = -0.00650425 Jy ! Component: 700 - total flux cleaned = -0.00682093 Jy ! Component: 750 - total flux cleaned = -0.00681732 Jy ! Component: 800 - total flux cleaned = -0.00675658 Jy ! Component: 850 - total flux cleaned = -0.0066977 Jy ! Component: 900 - total flux cleaned = -0.00664188 Jy ! Component: 950 - total flux cleaned = -0.00653231 Jy ! Component: 1000 - total flux cleaned = -0.0063185 Jy ! Component: 1050 - total flux cleaned = -0.00626745 Jy ! Component: 1100 - total flux cleaned = -0.00621688 Jy ! Component: 1150 - total flux cleaned = -0.00601711 Jy ! Component: 1200 - total flux cleaned = -0.00577425 Jy ! Component: 1250 - total flux cleaned = -0.00572626 Jy ! Component: 1300 - total flux cleaned = -0.0055384 Jy ! Component: 1350 - total flux cleaned = -0.00544534 Jy ! Component: 1400 - total flux cleaned = -0.00512834 Jy ! Component: 1450 - total flux cleaned = -0.00486265 Jy ! Component: 1500 - total flux cleaned = -0.00464445 Jy ! Component: 1550 - total flux cleaned = -0.00438642 Jy ! Component: 1600 - total flux cleaned = -0.00425921 Jy ! Component: 1650 - total flux cleaned = -0.00400715 Jy ! Component: 1700 - total flux cleaned = -0.00375823 Jy ! Component: 1750 - total flux cleaned = -0.00351181 Jy ! Component: 1800 - total flux cleaned = -0.00334852 Jy ! Component: 1850 - total flux cleaned = -0.00310638 Jy ! Component: 1900 - total flux cleaned = -0.00278695 Jy ! Component: 1950 - total flux cleaned = -0.00274779 Jy ! Component: 2000 - total flux cleaned = -0.00270796 Jy ! Component: 2050 - total flux cleaned = -0.00255197 Jy ! Component: 2100 - total flux cleaned = -0.00239718 Jy ! Component: 2150 - total flux cleaned = -0.00220497 Jy ! Component: 2200 - total flux cleaned = -0.00216679 Jy ! Component: 2250 - total flux cleaned = -0.0019381 Jy ! Component: 2300 - total flux cleaned = -0.00174883 Jy ! Component: 2350 - total flux cleaned = -0.00156001 Jy ! Component: 2400 - total flux cleaned = -0.00133389 Jy ! Component: 2450 - total flux cleaned = -0.00110816 Jy ! Component: 2500 - total flux cleaned = -0.000995504 Jy ! Component: 2550 - total flux cleaned = -0.000732544 Jy ! Component: 2600 - total flux cleaned = -0.000619856 Jy ! Component: 2650 - total flux cleaned = -0.000507129 Jy ! Component: 2700 - total flux cleaned = -0.000356766 Jy ! Component: 2750 - total flux cleaned = -0.000319101 Jy ! Component: 2800 - total flux cleaned = -0.000205729 Jy ! Component: 2850 - total flux cleaned = -0.000167672 Jy ! Component: 2900 - total flux cleaned = -9.11429e-05 Jy ! Component: 2950 - total flux cleaned = 2.41945e-05 Jy ! Component: 3000 - total flux cleaned = 0.000101834 Jy ! Component: 3050 - total flux cleaned = 0.000257262 Jy ! Component: 3100 - total flux cleaned = 0.000296403 Jy ! Component: 3150 - total flux cleaned = 0.000335388 Jy ! Component: 3200 - total flux cleaned = 0.000335296 Jy ! Component: 3250 - total flux cleaned = 0.000294836 Jy ! Component: 3300 - total flux cleaned = 0.000335706 Jy ! Component: 3350 - total flux cleaned = 0.000335887 Jy ! Component: 3400 - total flux cleaned = 0.000335595 Jy ! Component: 3450 - total flux cleaned = 0.000335181 Jy ! Component: 3500 - total flux cleaned = 0.00033497 Jy ! Component: 3550 - total flux cleaned = 0.00037923 Jy ! Component: 3600 - total flux cleaned = 0.000334022 Jy ! Component: 3650 - total flux cleaned = 0.000379341 Jy ! Component: 3700 - total flux cleaned = 0.000379318 Jy ! Component: 3750 - total flux cleaned = 0.000285311 Jy ! Component: 3800 - total flux cleaned = 0.0002851 Jy ! Component: 3850 - total flux cleaned = 0.000284503 Jy ! Component: 3900 - total flux cleaned = 0.000283926 Jy ! Component: 3950 - total flux cleaned = 0.000233522 Jy ! Component: 4000 - total flux cleaned = 0.000233987 Jy ! Component: 4050 - total flux cleaned = 0.000181888 Jy ! Total flux subtracted in 4096 components = 0.000181766 Jy ! Clean residual min=-0.002857 max=0.003152 Jy/beam ! Clean residual mean=0.000005 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.465843 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 302 components and 0.465843 Jy ![Exited script file: muppet] wmap "J0141-0928_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.88 x 7.455 at -4.175 degrees (North through East) ! Clean map min=-0.0051027 max=0.399 Jy/beam ! Writing clean map to FITS file: J0141-0928_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.398995 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00093197 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.700738 0.700738 1.40148 2.80295 5.6059 11.2118 22.4236 44.8472 89.6944 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.398 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.88 x 7.455 at -4.175 degrees (North through East) ! Clean map min=-0.0051027 max=0.399 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0141-0928_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:49:32 2019