! Started logfile: J0141-0928_S_2017_06_15_pus_uvs.log on Tue May 7 15:08:19 2019 obs J0141-0928_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0141-0928_S_2017_06_15_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.327536 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0141-0928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 1356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0141-0928_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.596911Jy sigma=0.005081 ! Fit after self-cal, rms=0.577663Jy sigma=0.004953 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=6.646 mas, bpa=-1.054 degrees ! Estimated noise=2949.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.326903 Jy ! Component: 100 - total flux cleaned = 0.407582 Jy ! Total flux subtracted in 100 components = 0.407582 Jy ! Clean residual min=-0.023343 max=0.040917 Jy/beam ! Clean residual mean=0.000026 rms=0.008240 Jy/beam ! Combined flux in latest and established models = 0.407583 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.407583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125131Jy sigma=0.001048 ! Fit after self-cal, rms=0.125100Jy sigma=0.001048 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=7.573 mas, bpa=-0.5851 degrees ! Estimated noise=2601.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483335 Jy ! Component: 100 - total flux cleaned = 0.0720352 Jy ! Component: 150 - total flux cleaned = 0.0848841 Jy ! Component: 200 - total flux cleaned = 0.0922134 Jy ! Total flux subtracted in 200 components = 0.0922134 Jy ! Clean residual min=-0.020740 max=0.028283 Jy/beam ! Clean residual mean=-0.000002 rms=0.006085 Jy/beam ! Combined flux in latest and established models = 0.499796 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 44 components and 0.499796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107636Jy sigma=0.000872 ! Fit after self-cal, rms=0.107614Jy sigma=0.000871 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.85 HN 1.00* KP 1.07 ! LA 0.99 MK 1.03 NL 0.88 OV 0.99 ! PT 1.03 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.84 FD 0.86 HN 1.00* KP 1.00 ! LA 0.97 MK 0.98 NL 1.00 OV 1.02 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 0.90 HN 1.00* KP 0.99 ! LA 0.99 MK 1.05 NL 0.97 OV 0.95 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.107614Jy sigma=0.000871 ! Fit after self-cal, rms=0.086925Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.022 mas, bmaj=7.703 mas, bpa=0.2374 degrees ! Estimated noise=2632.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00073886 Jy ! Component: 100 - total flux cleaned = -0.00119774 Jy ! Component: 150 - total flux cleaned = -0.00118965 Jy ! Component: 200 - total flux cleaned = -0.00131575 Jy ! Total flux subtracted in 200 components = -0.00131575 Jy ! Clean residual min=-0.009544 max=0.009176 Jy/beam ! Clean residual mean=-0.000000 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 0.49848 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.49848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086421Jy sigma=0.000664 ! Fit after self-cal, rms=0.086601Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086601Jy sigma=0.000664 ! Fit after self-cal, rms=0.086911Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=7.71 mas, bpa=0.2235 degrees ! Estimated noise=2635.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.44309e-05 Jy ! Component: 100 - total flux cleaned = -0.000539488 Jy ! Component: 150 - total flux cleaned = -0.000754754 Jy ! Component: 200 - total flux cleaned = -0.000957755 Jy ! Total flux subtracted in 200 components = -0.000957755 Jy ! Clean residual min=-0.008861 max=0.008946 Jy/beam ! Clean residual mean=-0.000000 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.497522 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.497523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086612Jy sigma=0.000661 ! Fit after self-cal, rms=0.086609Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00644434 Jy ! Component: 100 - total flux cleaned = 0.00557241 Jy ! Component: 150 - total flux cleaned = 0.00471829 Jy ! Component: 200 - total flux cleaned = 0.00397285 Jy ! Total flux subtracted in 200 components = 0.00397285 Jy ! Clean residual min=-0.007997 max=0.007331 Jy/beam ! Clean residual mean=-0.000001 rms=0.001813 Jy/beam ! Combined flux in latest and established models = 0.501495 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.501495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085855Jy sigma=0.000655 ! Fit after self-cal, rms=0.085817Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085817Jy sigma=0.000655 ! Fit after self-cal, rms=0.085689Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=7.699 mas, bpa=0.1986 degrees ! Estimated noise=2624.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156885 Jy ! Component: 100 - total flux cleaned = 0.00109182 Jy ! Component: 150 - total flux cleaned = 0.00066369 Jy ! Component: 200 - total flux cleaned = 0.000263147 Jy ! Total flux subtracted in 200 components = 0.000263147 Jy ! Clean residual min=-0.007479 max=0.007295 Jy/beam ! Clean residual mean=-0.000001 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.501759 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.501759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085469Jy sigma=0.000652 ! Fit after self-cal, rms=0.085462Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.74973e-05 Jy ! Component: 100 - total flux cleaned = -0.000250174 Jy ! Component: 150 - total flux cleaned = -0.000455462 Jy ! Component: 200 - total flux cleaned = -0.000652315 Jy ! Total flux subtracted in 200 components = -0.000652315 Jy ! Clean residual min=-0.007263 max=0.007148 Jy/beam ! Clean residual mean=-0.000000 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.501106 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.501106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085346Jy sigma=0.000651 ! Fit after self-cal, rms=0.085339Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085339Jy sigma=0.000651 ! Fit after self-cal, rms=0.085364Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.409 mas, bmaj=15.74 mas, bpa=0.3239 degrees ! Estimated noise=3372.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605813 Jy ! Component: 100 - total flux cleaned = 0.000659334 Jy ! Component: 150 - total flux cleaned = 0.00059339 Jy ! Component: 200 - total flux cleaned = 0.000562763 Jy ! Total flux subtracted in 200 components = 0.000562763 Jy ! Clean residual min=-0.008293 max=0.006514 Jy/beam ! Clean residual mean=-0.000001 rms=0.002165 Jy/beam ! Combined flux in latest and established models = 0.501669 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 90 components and 0.501669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085317Jy sigma=0.000651 ! Fit after self-cal, rms=0.085312Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329127 Jy ! Component: 100 - total flux cleaned = 0.00033019 Jy ! Component: 150 - total flux cleaned = 0.000300555 Jy ! Component: 200 - total flux cleaned = 0.000298912 Jy ! Total flux subtracted in 200 components = 0.000298912 Jy ! Clean residual min=-0.008164 max=0.006535 Jy/beam ! Clean residual mean=-0.000001 rms=0.002158 Jy/beam ! Combined flux in latest and established models = 0.501968 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 98 components and 0.501968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085283Jy sigma=0.000651 ! Fit after self-cal, rms=0.085280Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=7.695 mas, bpa=0.1703 degrees ! Estimated noise=2621.19 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.013 x 7.695 at 0.1703 degrees (North through East) ! Clean map min=-0.0065622 max=0.42483 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.508 mas, bmaj=6.76 mas, bpa=-0.8101 degrees ! Estimated noise=2930.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.323803 Jy ! Component: 100 - total flux cleaned = 0.403728 Jy ! Component: 150 - total flux cleaned = 0.440605 Jy ! Component: 200 - total flux cleaned = 0.460488 Jy ! Total flux subtracted in 200 components = 0.460488 Jy ! Clean residual min=-0.009222 max=0.010620 Jy/beam ! Clean residual mean=0.000008 rms=0.002600 Jy/beam ! Combined flux in latest and established models = 0.460488 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.460488 Jy ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=7.695 mas, bpa=0.1703 degrees ! Estimated noise=2621.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173448 Jy ! Component: 100 - total flux cleaned = 0.0269719 Jy ! Component: 150 - total flux cleaned = 0.0328338 Jy ! Component: 200 - total flux cleaned = 0.0347956 Jy ! Total flux subtracted in 200 components = 0.0347956 Jy ! Clean residual min=-0.006212 max=0.006546 Jy/beam ! Clean residual mean=0.000002 rms=0.001667 Jy/beam ! Combined flux in latest and established models = 0.495283 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 70 components and 0.495283 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.409 mas, bmaj=15.74 mas, bpa=0.3239 degrees ! Estimated noise=3372.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416639 Jy ! Component: 100 - total flux cleaned = 0.00484762 Jy ! Component: 150 - total flux cleaned = 0.00526945 Jy ! Component: 200 - total flux cleaned = 0.00553853 Jy ! Total flux subtracted in 200 components = 0.00553853 Jy ! Clean residual min=-0.007428 max=0.007374 Jy/beam ! Clean residual mean=0.000001 rms=0.002177 Jy/beam ! Combined flux in latest and established models = 0.500822 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012855 Jy ! Component: 100 - total flux cleaned = 0.000272231 Jy ! Component: 150 - total flux cleaned = 0.000333428 Jy ! Component: 200 - total flux cleaned = 0.000363229 Jy ! Total flux subtracted in 200 components = 0.000363229 Jy ! Clean residual min=-0.007358 max=0.007324 Jy/beam ! Clean residual mean=0.000001 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 0.501185 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 114 components and 0.501185 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=7.695 mas, bpa=0.1703 degrees ! Estimated noise=2621.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000374059 Jy ! Component: 100 - total flux cleaned = -0.000543095 Jy ! Component: 150 - total flux cleaned = -0.000688508 Jy ! Component: 200 - total flux cleaned = -0.000776626 Jy ! Total flux subtracted in 200 components = -0.000776626 Jy ! Clean residual min=-0.005780 max=0.006604 Jy/beam ! Clean residual mean=0.000000 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.500408 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 127 components and 0.500408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085138Jy sigma=0.000649 ! Fit after self-cal, rms=0.085112Jy sigma=0.000649 wmodel J0141-0928_S_2017_06_15_pus_map.mod ! Writing 127 model components to file: J0141-0928_S_2017_06_15_pus_map.mod wobs J0141-0928_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0141-0928_S_2017_06_15_pus_uvs.fits wwins J0141-0928_S_2017_06_15_pus_map.win ! wwins: Wrote 2 windows to J0141-0928_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167223 Jy ! Component: 100 - total flux cleaned = 0.00204897 Jy ! Component: 150 - total flux cleaned = 0.00248654 Jy ! Component: 200 - total flux cleaned = 0.00306146 Jy ! Component: 250 - total flux cleaned = 0.00337095 Jy ! Component: 300 - total flux cleaned = 0.0037402 Jy ! Component: 350 - total flux cleaned = 0.00416153 Jy ! Component: 400 - total flux cleaned = 0.0044961 Jy ! Component: 450 - total flux cleaned = 0.00481838 Jy ! Component: 500 - total flux cleaned = 0.00500696 Jy ! Component: 550 - total flux cleaned = 0.00530747 Jy ! Component: 600 - total flux cleaned = 0.00542111 Jy ! Component: 650 - total flux cleaned = 0.00542045 Jy ! Component: 700 - total flux cleaned = 0.00547446 Jy ! Component: 750 - total flux cleaned = 0.00547449 Jy ! Component: 800 - total flux cleaned = 0.00567804 Jy ! Component: 850 - total flux cleaned = 0.00572728 Jy ! Component: 900 - total flux cleaned = 0.00587223 Jy ! Component: 950 - total flux cleaned = 0.00591965 Jy ! Component: 1000 - total flux cleaned = 0.0060562 Jy ! Component: 1050 - total flux cleaned = 0.00623353 Jy ! Component: 1100 - total flux cleaned = 0.00640715 Jy ! Component: 1150 - total flux cleaned = 0.00661959 Jy ! Component: 1200 - total flux cleaned = 0.00682676 Jy ! Component: 1250 - total flux cleaned = 0.0070293 Jy ! Component: 1300 - total flux cleaned = 0.00710926 Jy ! Component: 1350 - total flux cleaned = 0.00734344 Jy ! Component: 1400 - total flux cleaned = 0.00749582 Jy ! Component: 1450 - total flux cleaned = 0.00768224 Jy ! Component: 1500 - total flux cleaned = 0.00782947 Jy ! Component: 1550 - total flux cleaned = 0.00804591 Jy ! Component: 1600 - total flux cleaned = 0.00815202 Jy ! Component: 1650 - total flux cleaned = 0.00829154 Jy ! Component: 1700 - total flux cleaned = 0.00832587 Jy ! Component: 1750 - total flux cleaned = 0.00835936 Jy ! Component: 1800 - total flux cleaned = 0.00845912 Jy ! Component: 1850 - total flux cleaned = 0.00832815 Jy ! Component: 1900 - total flux cleaned = 0.00836138 Jy ! Component: 1950 - total flux cleaned = 0.00842547 Jy ! Component: 2000 - total flux cleaned = 0.00845671 Jy ! Component: 2050 - total flux cleaned = 0.00845647 Jy ! Component: 2100 - total flux cleaned = 0.0084561 Jy ! Component: 2150 - total flux cleaned = 0.008426 Jy ! Component: 2200 - total flux cleaned = 0.00845636 Jy ! Component: 2250 - total flux cleaned = 0.00845655 Jy ! Component: 2300 - total flux cleaned = 0.00854422 Jy ! Component: 2350 - total flux cleaned = 0.00848607 Jy ! Component: 2400 - total flux cleaned = 0.00845725 Jy ! Component: 2450 - total flux cleaned = 0.00840036 Jy ! Component: 2500 - total flux cleaned = 0.00837192 Jy ! Component: 2550 - total flux cleaned = 0.00826041 Jy ! Component: 2600 - total flux cleaned = 0.00831543 Jy ! Component: 2650 - total flux cleaned = 0.00826023 Jy ! Component: 2700 - total flux cleaned = 0.00820582 Jy ! Component: 2750 - total flux cleaned = 0.00825994 Jy ! Component: 2800 - total flux cleaned = 0.00828677 Jy ! Component: 2850 - total flux cleaned = 0.00831351 Jy ! Component: 2900 - total flux cleaned = 0.00841936 Jy ! Component: 2950 - total flux cleaned = 0.008498 Jy ! Component: 3000 - total flux cleaned = 0.00857636 Jy ! Component: 3050 - total flux cleaned = 0.00865416 Jy ! Component: 3100 - total flux cleaned = 0.00865421 Jy ! Component: 3150 - total flux cleaned = 0.00870576 Jy ! Component: 3200 - total flux cleaned = 0.00867995 Jy ! Component: 3250 - total flux cleaned = 0.00865434 Jy ! Component: 3300 - total flux cleaned = 0.00870563 Jy ! Component: 3350 - total flux cleaned = 0.00860299 Jy ! Component: 3400 - total flux cleaned = 0.00865415 Jy ! Component: 3450 - total flux cleaned = 0.00865411 Jy ! Component: 3500 - total flux cleaned = 0.0087054 Jy ! Component: 3550 - total flux cleaned = 0.00873115 Jy ! Component: 3600 - total flux cleaned = 0.0087056 Jy ! Component: 3650 - total flux cleaned = 0.00870586 Jy ! Component: 3700 - total flux cleaned = 0.00873146 Jy ! Component: 3750 - total flux cleaned = 0.00870585 Jy ! Component: 3800 - total flux cleaned = 0.00870598 Jy ! Component: 3850 - total flux cleaned = 0.00865439 Jy ! Component: 3900 - total flux cleaned = 0.00865431 Jy ! Component: 3950 - total flux cleaned = 0.00857645 Jy ! Component: 4000 - total flux cleaned = 0.00852441 Jy ! Component: 4050 - total flux cleaned = 0.00849809 Jy ! Total flux subtracted in 4096 components = 0.00841908 Jy ! Clean residual min=-0.001651 max=0.001857 Jy/beam ! Clean residual mean=0.000006 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.508827 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 366 components and 0.508828 Jy ![Exited script file: muppet] wmap "J0141-0928_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.013 x 7.695 at 0.1703 degrees (North through East) ! Clean map min=-0.0044336 max=0.42934 Jy/beam ! Writing clean map to FITS file: J0141-0928_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.42934 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000437673 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.305823 0.305823 0.611646 1.22329 2.44658 4.89317 9.78634 19.5727 39.1453 78.2907 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.429 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.013 x 7.695 at 0.1703 degrees (North through East) ! Clean map min=-0.0044336 max=0.42934 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0141-0928_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:08:23 2019