! Started logfile: J0141-0928_S_2017_06_10_pus_uvs.log on Mon May 6 14:42:04 2019 obs J0141-0928_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0141-0928_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.551111 visibilities/baseline/integration-bin. ! Found source: J0141-0928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0141-0928_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.533738Jy sigma=0.005064 ! Fit after self-cal, rms=0.526820Jy sigma=0.005000 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=9.727 mas, bpa=10.8 degrees ! Estimated noise=3179.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.369493 Jy ! Component: 100 - total flux cleaned = 0.450903 Jy ! Total flux subtracted in 100 components = 0.450903 Jy ! Clean residual min=-0.016248 max=0.027155 Jy/beam ! Clean residual mean=0.000071 rms=0.005789 Jy/beam ! Combined flux in latest and established models = 0.450903 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.450903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092932Jy sigma=0.000864 ! Fit after self-cal, rms=0.092927Jy sigma=0.000864 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=11.3 mas, bpa=10.82 degrees ! Estimated noise=2749.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357203 Jy ! Component: 100 - total flux cleaned = 0.0522981 Jy ! Component: 150 - total flux cleaned = 0.060203 Jy ! Component: 200 - total flux cleaned = 0.0639574 Jy ! Total flux subtracted in 200 components = 0.0639574 Jy ! Clean residual min=-0.009512 max=0.008560 Jy/beam ! Clean residual mean=-0.000011 rms=0.002342 Jy/beam ! Combined flux in latest and established models = 0.51486 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 28 components and 0.51486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079750Jy sigma=0.000740 ! Fit after self-cal, rms=0.079638Jy sigma=0.000739 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.02 KP 1.03 ! LA 1.06 MK 1.00* NL 0.91 OV 1.00 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.07 KP 1.02 ! LA 0.99 MK 1.00* NL 1.07 OV 1.04 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.91 KP 1.00 ! LA 1.00 MK 1.00* NL 0.99 OV 0.98 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.079638Jy sigma=0.000739 ! Fit after self-cal, rms=0.073387Jy sigma=0.000688 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.779 mas, bmaj=11.28 mas, bpa=10.79 degrees ! Estimated noise=2742.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139106 Jy ! Component: 100 - total flux cleaned = 0.00143962 Jy ! Component: 150 - total flux cleaned = 0.00135101 Jy ! Component: 200 - total flux cleaned = 0.00135036 Jy ! Total flux subtracted in 200 components = 0.00135036 Jy ! Clean residual min=-0.005471 max=0.006021 Jy/beam ! Clean residual mean=-0.000001 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.51621 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.51621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073310Jy sigma=0.000687 ! Fit after self-cal, rms=0.073309Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073309Jy sigma=0.000687 ! Fit after self-cal, rms=0.073331Jy sigma=0.000687 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=11.28 mas, bpa=10.79 degrees ! Estimated noise=2743.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560351 Jy ! Component: 100 - total flux cleaned = 0.000558496 Jy ! Component: 150 - total flux cleaned = 0.000558946 Jy ! Component: 200 - total flux cleaned = 0.000528525 Jy ! Total flux subtracted in 200 components = 0.000528525 Jy ! Clean residual min=-0.005583 max=0.006051 Jy/beam ! Clean residual mean=-0.000001 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.516739 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.516739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073298Jy sigma=0.000687 ! Fit after self-cal, rms=0.073293Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.44114e-05 Jy ! Component: 100 - total flux cleaned = -2.40991e-05 Jy ! Component: 150 - total flux cleaned = -4.82036e-05 Jy ! Component: 200 - total flux cleaned = -4.69609e-05 Jy ! Total flux subtracted in 200 components = -4.69609e-05 Jy ! Clean residual min=-0.005666 max=0.006021 Jy/beam ! Clean residual mean=-0.000001 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.516692 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.516692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073273Jy sigma=0.000686 ! Fit after self-cal, rms=0.073269Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073269Jy sigma=0.000686 ! Fit after self-cal, rms=0.073260Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=11.28 mas, bpa=10.8 degrees ! Estimated noise=2743.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.72045e-05 Jy ! Component: 100 - total flux cleaned = 8.74745e-05 Jy ! Component: 150 - total flux cleaned = 6.76584e-05 Jy ! Component: 200 - total flux cleaned = 8.60663e-05 Jy ! Total flux subtracted in 200 components = 8.60663e-05 Jy ! Clean residual min=-0.005729 max=0.006029 Jy/beam ! Clean residual mean=-0.000000 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.516778 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.516778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073246Jy sigma=0.000686 ! Fit after self-cal, rms=0.073244Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.35046e-06 Jy ! Component: 100 - total flux cleaned = -3.0313e-05 Jy ! Component: 150 - total flux cleaned = -1.40165e-05 Jy ! Component: 200 - total flux cleaned = 1.90356e-06 Jy ! Total flux subtracted in 200 components = 1.90356e-06 Jy ! Clean residual min=-0.005766 max=0.006007 Jy/beam ! Clean residual mean=-0.000000 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.51678 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.51678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073235Jy sigma=0.000686 ! Fit after self-cal, rms=0.073233Jy sigma=0.000686 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073233Jy sigma=0.000686 ! Fit after self-cal, rms=0.073227Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.67 mas, bmaj=16.98 mas, bpa=-4.707 degrees ! Estimated noise=3326.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605557 Jy ! Component: 100 - total flux cleaned = 0.000531962 Jy ! Component: 150 - total flux cleaned = 0.000501088 Jy ! Component: 200 - total flux cleaned = 0.000553977 Jy ! Total flux subtracted in 200 components = 0.000553977 Jy ! Clean residual min=-0.004503 max=0.005670 Jy/beam ! Clean residual mean=-0.000001 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.517334 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.517334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073240Jy sigma=0.000686 ! Fit after self-cal, rms=0.073234Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.86558e-05 Jy ! Component: 100 - total flux cleaned = -1.30768e-05 Jy ! Component: 150 - total flux cleaned = 8.3781e-06 Jy ! Component: 200 - total flux cleaned = 4.69214e-05 Jy ! Total flux subtracted in 200 components = 4.69214e-05 Jy ! Clean residual min=-0.004543 max=0.005583 Jy/beam ! Clean residual mean=-0.000001 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.517381 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 71 components and 0.517381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073254Jy sigma=0.000686 ! Fit after self-cal, rms=0.073251Jy sigma=0.000686 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=11.28 mas, bpa=10.8 degrees ! Estimated noise=2743.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.777 x 11.28 at 10.8 degrees (North through East) ! Clean map min=-0.0057861 max=0.47747 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=9.706 mas, bpa=10.64 degrees ! Estimated noise=3151.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.366183 Jy ! Component: 100 - total flux cleaned = 0.44718 Jy ! Component: 150 - total flux cleaned = 0.478404 Jy ! Component: 200 - total flux cleaned = 0.495625 Jy ! Total flux subtracted in 200 components = 0.495625 Jy ! Clean residual min=-0.009120 max=0.009198 Jy/beam ! Clean residual mean=0.000024 rms=0.002469 Jy/beam ! Combined flux in latest and established models = 0.495625 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.495625 Jy ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=11.28 mas, bpa=10.8 degrees ! Estimated noise=2743.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114732 Jy ! Component: 100 - total flux cleaned = 0.0170841 Jy ! Component: 150 - total flux cleaned = 0.0198981 Jy ! Component: 200 - total flux cleaned = 0.0208201 Jy ! Total flux subtracted in 200 components = 0.0208201 Jy ! Clean residual min=-0.005807 max=0.006021 Jy/beam ! Clean residual mean=0.000001 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 0.516445 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.516445 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.67 mas, bmaj=16.98 mas, bpa=-4.707 degrees ! Estimated noise=3326.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000895041 Jy ! Component: 100 - total flux cleaned = 0.00101167 Jy ! Component: 150 - total flux cleaned = 0.0010785 Jy ! Component: 200 - total flux cleaned = 0.00110673 Jy ! Total flux subtracted in 200 components = 0.00110673 Jy ! Clean residual min=-0.004685 max=0.005712 Jy/beam ! Clean residual mean=-0.000001 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.517552 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.65871e-05 Jy ! Component: 100 - total flux cleaned = 5.0984e-05 Jy ! Component: 150 - total flux cleaned = 7.41123e-05 Jy ! Component: 200 - total flux cleaned = 9.62641e-05 Jy ! Total flux subtracted in 200 components = 9.62641e-05 Jy ! Clean residual min=-0.004675 max=0.005608 Jy/beam ! Clean residual mean=-0.000001 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.517648 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.517648 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=11.28 mas, bpa=10.8 degrees ! Estimated noise=2743.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000749185 Jy ! Component: 100 - total flux cleaned = -0.000565484 Jy ! Component: 150 - total flux cleaned = -0.000392814 Jy ! Component: 200 - total flux cleaned = -0.000276883 Jy ! Total flux subtracted in 200 components = -0.000276883 Jy ! Clean residual min=-0.005923 max=0.005834 Jy/beam ! Clean residual mean=-0.000001 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.517371 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.517371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073235Jy sigma=0.000686 ! Fit after self-cal, rms=0.073232Jy sigma=0.000686 wmodel J0141-0928_S_2017_06_10_pus_map.mod ! Writing 50 model components to file: J0141-0928_S_2017_06_10_pus_map.mod wobs J0141-0928_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0141-0928_S_2017_06_10_pus_uvs.fits wwins J0141-0928_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0141-0928_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000502506 Jy ! Component: 100 - total flux cleaned = 0.000236158 Jy ! Component: 150 - total flux cleaned = -0.000365771 Jy ! Component: 200 - total flux cleaned = -0.00084441 Jy ! Component: 250 - total flux cleaned = -0.00129344 Jy ! Component: 300 - total flux cleaned = -0.00200196 Jy ! Component: 350 - total flux cleaned = -0.00247362 Jy ! Component: 400 - total flux cleaned = -0.00285536 Jy ! Component: 450 - total flux cleaned = -0.00291594 Jy ! Component: 500 - total flux cleaned = -0.00303678 Jy ! Component: 550 - total flux cleaned = -0.00326587 Jy ! Component: 600 - total flux cleaned = -0.00309936 Jy ! Component: 650 - total flux cleaned = -0.0029912 Jy ! Component: 700 - total flux cleaned = -0.00288744 Jy ! Component: 750 - total flux cleaned = -0.00298895 Jy ! Component: 800 - total flux cleaned = -0.00283879 Jy ! Component: 850 - total flux cleaned = -0.00283882 Jy ! Component: 900 - total flux cleaned = -0.00283879 Jy ! Component: 950 - total flux cleaned = -0.00274557 Jy ! Component: 1000 - total flux cleaned = -0.00270046 Jy ! Component: 1050 - total flux cleaned = -0.00270086 Jy ! Component: 1100 - total flux cleaned = -0.00256855 Jy ! Component: 1150 - total flux cleaned = -0.00239515 Jy ! Component: 1200 - total flux cleaned = -0.00230916 Jy ! Component: 1250 - total flux cleaned = -0.00192872 Jy ! Component: 1300 - total flux cleaned = -0.00163472 Jy ! Component: 1350 - total flux cleaned = -0.00130104 Jy ! Component: 1400 - total flux cleaned = -0.000968557 Jy ! Component: 1450 - total flux cleaned = -0.000720384 Jy ! Component: 1500 - total flux cleaned = -0.000596577 Jy ! Component: 1550 - total flux cleaned = -0.0003908 Jy ! Component: 1600 - total flux cleaned = -0.000102784 Jy ! Component: 1650 - total flux cleaned = 6.16285e-05 Jy ! Component: 1700 - total flux cleaned = 0.000267178 Jy ! Component: 1750 - total flux cleaned = 0.000390552 Jy ! Component: 1800 - total flux cleaned = 0.000637195 Jy ! Component: 1850 - total flux cleaned = 0.000884677 Jy ! Component: 1900 - total flux cleaned = 0.0012155 Jy ! Component: 1950 - total flux cleaned = 0.00142328 Jy ! Component: 2000 - total flux cleaned = 0.00163225 Jy ! Component: 2050 - total flux cleaned = 0.00180024 Jy ! Component: 2100 - total flux cleaned = 0.00201139 Jy ! Component: 2150 - total flux cleaned = 0.0022244 Jy ! Component: 2200 - total flux cleaned = 0.00243957 Jy ! Component: 2250 - total flux cleaned = 0.00270055 Jy ! Component: 2300 - total flux cleaned = 0.00283192 Jy ! Component: 2350 - total flux cleaned = 0.00305272 Jy ! Component: 2400 - total flux cleaned = 0.00323126 Jy ! Component: 2450 - total flux cleaned = 0.00341143 Jy ! Component: 2500 - total flux cleaned = 0.00359368 Jy ! Component: 2550 - total flux cleaned = 0.00377733 Jy ! Component: 2600 - total flux cleaned = 0.00391656 Jy ! Component: 2650 - total flux cleaned = 0.00415168 Jy ! Component: 2700 - total flux cleaned = 0.00429468 Jy ! Component: 2750 - total flux cleaned = 0.0044878 Jy ! Component: 2800 - total flux cleaned = 0.00463423 Jy ! Component: 2850 - total flux cleaned = 0.00488161 Jy ! Component: 2900 - total flux cleaned = 0.00503222 Jy ! Component: 2950 - total flux cleaned = 0.00523536 Jy ! Component: 3000 - total flux cleaned = 0.00539022 Jy ! Component: 3050 - total flux cleaned = 0.00554688 Jy ! Component: 3100 - total flux cleaned = 0.00565283 Jy ! Component: 3150 - total flux cleaned = 0.00575965 Jy ! Component: 3200 - total flux cleaned = 0.00586794 Jy ! Component: 3250 - total flux cleaned = 0.00597785 Jy ! Component: 3300 - total flux cleaned = 0.00608953 Jy ! Component: 3350 - total flux cleaned = 0.00614532 Jy ! Component: 3400 - total flux cleaned = 0.00626024 Jy ! Component: 3450 - total flux cleaned = 0.0064362 Jy ! Component: 3500 - total flux cleaned = 0.00643622 Jy ! Component: 3550 - total flux cleaned = 0.00655675 Jy ! Component: 3600 - total flux cleaned = 0.00661759 Jy ! Component: 3650 - total flux cleaned = 0.00674245 Jy ! Component: 3700 - total flux cleaned = 0.00674206 Jy ! Component: 3750 - total flux cleaned = 0.00680649 Jy ! Component: 3800 - total flux cleaned = 0.00693676 Jy ! Component: 3850 - total flux cleaned = 0.00700326 Jy ! Component: 3900 - total flux cleaned = 0.00713762 Jy ! Component: 3950 - total flux cleaned = 0.00727446 Jy ! Component: 4000 - total flux cleaned = 0.0072737 Jy ! Component: 4050 - total flux cleaned = 0.00741461 Jy ! Total flux subtracted in 4096 components = 0.007486 Jy ! Clean residual min=-0.003993 max=0.004225 Jy/beam ! Clean residual mean=0.000008 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.524857 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 278 components and 0.524857 Jy ![Exited script file: muppet] wmap "J0141-0928_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.777 x 11.28 at 10.8 degrees (North through East) ! Clean map min=-0.012214 max=0.47605 Jy/beam ! Writing clean map to FITS file: J0141-0928_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.476051 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00135538 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.854138 0.854138 1.70828 3.41655 6.8331 13.6662 27.3324 54.6648 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.476 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.777 x 11.28 at 10.8 degrees (North through East) ! Clean map min=-0.012214 max=0.47605 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0141-0928_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:42:09 2019