! Started logfile: J0138-0540_S_2017_07_16_pus_uvs.log on Thu May 9 10:57:28 2019 obs J0138-0540_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0138-0540_S_2017_07_16_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.65848 visibilities/baseline/integration-bin. ! Found source: J0138-0540 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 13512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0138-0540_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 858 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.827673Jy sigma=0.007117 ! Fit after self-cal, rms=0.802405Jy sigma=0.006921 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.434 mas, bmaj=6.65 mas, bpa=-5.681 degrees ! Estimated noise=1257.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149523 Jy ! Component: 100 - total flux cleaned = 0.193159 Jy ! Total flux subtracted in 100 components = 0.193159 Jy ! Clean residual min=-0.010603 max=0.018600 Jy/beam ! Clean residual mean=0.000002 rms=0.003209 Jy/beam ! Combined flux in latest and established models = 0.193159 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.193159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100446Jy sigma=0.000840 ! Fit after self-cal, rms=0.100425Jy sigma=0.000839 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=7.077 mas, bpa=-3.769 degrees ! Estimated noise=823.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248367 Jy ! Component: 100 - total flux cleaned = 0.0380001 Jy ! Component: 150 - total flux cleaned = 0.0465427 Jy ! Component: 200 - total flux cleaned = 0.0521539 Jy ! Total flux subtracted in 200 components = 0.0521539 Jy ! Clean residual min=-0.010032 max=0.016438 Jy/beam ! Clean residual mean=-0.000014 rms=0.003068 Jy/beam ! Combined flux in latest and established models = 0.245313 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 27 components and 0.245313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093996Jy sigma=0.000785 ! Fit after self-cal, rms=0.093963Jy sigma=0.000784 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 1.01 KP 0.97 ! LA 0.97 MK 1.01 NL 0.91 OV 0.95 ! PT 0.97 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.52 FD 1.00* HN 1.06 KP 0.92 ! LA 0.97 MK 1.00 NL 1.07 OV 0.98 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* HN 1.05 KP 0.92 ! LA 0.96 MK 1.04 NL 1.03 OV 0.91 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 4. ! A total of 282 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.093963Jy sigma=0.000784 ! Fit after self-cal, rms=0.097680Jy sigma=0.000758 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=7.151 mas, bpa=-2.513 degrees ! Estimated noise=827.528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013091 Jy ! Component: 100 - total flux cleaned = 0.0156775 Jy ! Component: 150 - total flux cleaned = 0.0162062 Jy ! Component: 200 - total flux cleaned = 0.0160665 Jy ! Total flux subtracted in 200 components = 0.0160665 Jy ! Clean residual min=-0.008160 max=0.008976 Jy/beam ! Clean residual mean=-0.000022 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 0.261379 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.261379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095717Jy sigma=0.000742 ! Fit after self-cal, rms=0.095712Jy sigma=0.000740 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095712Jy sigma=0.000740 ! Fit after self-cal, rms=0.093496Jy sigma=0.000700 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.851 mas, bmaj=7.144 mas, bpa=-2.636 degrees ! Estimated noise=832.729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514888 Jy ! Component: 100 - total flux cleaned = 0.00638576 Jy ! Component: 150 - total flux cleaned = 0.00733872 Jy ! Component: 200 - total flux cleaned = 0.00750918 Jy ! Total flux subtracted in 200 components = 0.00750918 Jy ! Clean residual min=-0.004634 max=0.004631 Jy/beam ! Clean residual mean=-0.000014 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.268888 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.268888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093062Jy sigma=0.000696 ! Fit after self-cal, rms=0.093134Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128593 Jy ! Component: 100 - total flux cleaned = 0.00143079 Jy ! Component: 150 - total flux cleaned = 0.00130383 Jy ! Component: 200 - total flux cleaned = 0.00113309 Jy ! Total flux subtracted in 200 components = 0.00113309 Jy ! Clean residual min=-0.004541 max=0.004617 Jy/beam ! Clean residual mean=-0.000014 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.270022 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.270022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093034Jy sigma=0.000694 ! Fit after self-cal, rms=0.093019Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093019Jy sigma=0.000694 ! Fit after self-cal, rms=0.093963Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=7.125 mas, bpa=-2.68 degrees ! Estimated noise=828.704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211961 Jy ! Component: 100 - total flux cleaned = 0.00236099 Jy ! Component: 150 - total flux cleaned = 0.00226696 Jy ! Component: 200 - total flux cleaned = 0.00222688 Jy ! Total flux subtracted in 200 components = 0.00222688 Jy ! Clean residual min=-0.002620 max=0.002430 Jy/beam ! Clean residual mean=0.000001 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.272249 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 86 components and 0.272248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093893Jy sigma=0.000683 ! Fit after self-cal, rms=0.093924Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189484 Jy ! Component: 100 - total flux cleaned = 0.000155526 Jy ! Component: 150 - total flux cleaned = 0.000157245 Jy ! Component: 200 - total flux cleaned = 0.000188465 Jy ! Total flux subtracted in 200 components = 0.000188465 Jy ! Clean residual min=-0.002480 max=0.002329 Jy/beam ! Clean residual mean=0.000001 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.272437 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 97 components and 0.272437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093897Jy sigma=0.000683 ! Fit after self-cal, rms=0.093896Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093896Jy sigma=0.000683 ! Fit after self-cal, rms=0.093878Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.656 mas, bmaj=12.22 mas, bpa=-2.12 degrees ! Estimated noise=1121.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176978 Jy ! Component: 100 - total flux cleaned = 0.00203613 Jy ! Component: 150 - total flux cleaned = 0.00217164 Jy ! Component: 200 - total flux cleaned = 0.00231016 Jy ! Total flux subtracted in 200 components = 0.00231016 Jy ! Clean residual min=-0.002507 max=0.002643 Jy/beam ! Clean residual mean=0.000000 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.274747 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 110 components and 0.274747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093884Jy sigma=0.000683 ! Fit after self-cal, rms=0.093875Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123118 Jy ! Component: 100 - total flux cleaned = 0.000295191 Jy ! Component: 150 - total flux cleaned = 0.000401864 Jy ! Component: 200 - total flux cleaned = 0.000427757 Jy ! Total flux subtracted in 200 components = 0.000427757 Jy ! Clean residual min=-0.002538 max=0.002699 Jy/beam ! Clean residual mean=0.000000 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.275175 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 118 components and 0.275175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093872Jy sigma=0.000683 ! Fit after self-cal, rms=0.093869Jy sigma=0.000683 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=7.123 mas, bpa=-2.662 degrees ! Estimated noise=828.153 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.849 x 7.123 at -2.662 degrees (North through East) ! Clean map min=-0.0024255 max=0.19667 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=6.674 mas, bpa=-4.083 degrees ! Estimated noise=1249.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149374 Jy ! Component: 100 - total flux cleaned = 0.193164 Jy ! Component: 150 - total flux cleaned = 0.217368 Jy ! Component: 200 - total flux cleaned = 0.232387 Jy ! Total flux subtracted in 200 components = 0.232387 Jy ! Clean residual min=-0.004907 max=0.007810 Jy/beam ! Clean residual mean=0.000007 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.232387 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.232387 Jy ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=7.123 mas, bpa=-2.662 degrees ! Estimated noise=828.153 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127152 Jy ! Component: 100 - total flux cleaned = 0.0206552 Jy ! Component: 150 - total flux cleaned = 0.0262319 Jy ! Component: 200 - total flux cleaned = 0.0303297 Jy ! Total flux subtracted in 200 components = 0.0303297 Jy ! Clean residual min=-0.002739 max=0.002926 Jy/beam ! Clean residual mean=-0.000001 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.262717 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 62 components and 0.262717 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.656 mas, bmaj=12.22 mas, bpa=-2.12 degrees ! Estimated noise=1121.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567703 Jy ! Component: 100 - total flux cleaned = 0.00858253 Jy ! Component: 150 - total flux cleaned = 0.010288 Jy ! Component: 200 - total flux cleaned = 0.0113544 Jy ! Total flux subtracted in 200 components = 0.0113544 Jy ! Clean residual min=-0.002907 max=0.002723 Jy/beam ! Clean residual mean=-0.000001 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.274071 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562509 Jy ! Component: 100 - total flux cleaned = 0.000747524 Jy ! Component: 150 - total flux cleaned = 0.000897582 Jy ! Component: 200 - total flux cleaned = 0.0010194 Jy ! Total flux subtracted in 200 components = 0.0010194 Jy ! Clean residual min=-0.002685 max=0.002708 Jy/beam ! Clean residual mean=-0.000001 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.27509 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 126 components and 0.27509 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=7.123 mas, bpa=-2.662 degrees ! Estimated noise=828.153 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106373 Jy ! Component: 100 - total flux cleaned = -0.00122539 Jy ! Component: 150 - total flux cleaned = -0.00118879 Jy ! Component: 200 - total flux cleaned = -0.00115641 Jy ! Total flux subtracted in 200 components = -0.00115641 Jy ! Clean residual min=-0.002262 max=0.002226 Jy/beam ! Clean residual mean=-0.000000 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.273934 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 137 components and 0.273934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093823Jy sigma=0.000683 ! Fit after self-cal, rms=0.093818Jy sigma=0.000682 wmodel J0138-0540_S_2017_07_16_pus_map.mod ! Writing 137 model components to file: J0138-0540_S_2017_07_16_pus_map.mod wobs J0138-0540_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0138-0540_S_2017_07_16_pus_uvs.fits wwins J0138-0540_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J0138-0540_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.6102e-05 Jy ! Component: 100 - total flux cleaned = 4.63444e-05 Jy ! Component: 150 - total flux cleaned = -3.04897e-05 Jy ! Component: 200 - total flux cleaned = -0.000102972 Jy ! Component: 250 - total flux cleaned = -3.29157e-05 Jy ! Component: 300 - total flux cleaned = -3.30362e-05 Jy ! Component: 350 - total flux cleaned = -3.29704e-05 Jy ! Component: 400 - total flux cleaned = 3.05948e-05 Jy ! Component: 450 - total flux cleaned = 9.19556e-05 Jy ! Component: 500 - total flux cleaned = 0.000240214 Jy ! Component: 550 - total flux cleaned = 0.000355889 Jy ! Component: 600 - total flux cleaned = 0.000497249 Jy ! Component: 650 - total flux cleaned = 0.000635522 Jy ! Component: 700 - total flux cleaned = 0.000797884 Jy ! Component: 750 - total flux cleaned = 0.000877555 Jy ! Component: 800 - total flux cleaned = 0.00103397 Jy ! Component: 850 - total flux cleaned = 0.00113634 Jy ! Component: 900 - total flux cleaned = 0.00128626 Jy ! Component: 950 - total flux cleaned = 0.00140901 Jy ! Component: 1000 - total flux cleaned = 0.00150559 Jy ! Component: 1050 - total flux cleaned = 0.00167165 Jy ! Component: 1100 - total flux cleaned = 0.00171771 Jy ! Component: 1150 - total flux cleaned = 0.00178665 Jy ! Component: 1200 - total flux cleaned = 0.00187751 Jy ! Component: 1250 - total flux cleaned = 0.00192199 Jy ! Component: 1300 - total flux cleaned = 0.00205456 Jy ! Component: 1350 - total flux cleaned = 0.00205468 Jy ! Component: 1400 - total flux cleaned = 0.00211905 Jy ! Component: 1450 - total flux cleaned = 0.00226654 Jy ! Component: 1500 - total flux cleaned = 0.00232882 Jy ! Component: 1550 - total flux cleaned = 0.00241044 Jy ! Component: 1600 - total flux cleaned = 0.00249129 Jy ! Component: 1650 - total flux cleaned = 0.00253115 Jy ! Component: 1700 - total flux cleaned = 0.00257047 Jy ! Component: 1750 - total flux cleaned = 0.00259012 Jy ! Component: 1800 - total flux cleaned = 0.00257082 Jy ! Component: 1850 - total flux cleaned = 0.0025708 Jy ! Component: 1900 - total flux cleaned = 0.0026272 Jy ! Component: 1950 - total flux cleaned = 0.00270128 Jy ! Component: 2000 - total flux cleaned = 0.00271946 Jy ! Component: 2050 - total flux cleaned = 0.00275574 Jy ! Component: 2100 - total flux cleaned = 0.00284528 Jy ! Component: 2150 - total flux cleaned = 0.00280942 Jy ! Component: 2200 - total flux cleaned = 0.00280948 Jy ! Component: 2250 - total flux cleaned = 0.00284412 Jy ! Component: 2300 - total flux cleaned = 0.0028612 Jy ! Component: 2350 - total flux cleaned = 0.00292909 Jy ! Component: 2400 - total flux cleaned = 0.00289563 Jy ! Component: 2450 - total flux cleaned = 0.00292908 Jy ! Component: 2500 - total flux cleaned = 0.00296179 Jy ! Component: 2550 - total flux cleaned = 0.00292941 Jy ! Component: 2600 - total flux cleaned = 0.00301059 Jy ! Component: 2650 - total flux cleaned = 0.00302666 Jy ! Component: 2700 - total flux cleaned = 0.00304271 Jy ! Component: 2750 - total flux cleaned = 0.00312131 Jy ! Component: 2800 - total flux cleaned = 0.00315254 Jy ! Component: 2850 - total flux cleaned = 0.00322991 Jy ! Component: 2900 - total flux cleaned = 0.00318399 Jy ! Component: 2950 - total flux cleaned = 0.00325994 Jy ! Component: 3000 - total flux cleaned = 0.00329019 Jy ! Component: 3050 - total flux cleaned = 0.00330522 Jy ! Component: 3100 - total flux cleaned = 0.00340906 Jy ! Component: 3150 - total flux cleaned = 0.00339427 Jy ! Component: 3200 - total flux cleaned = 0.00346731 Jy ! Component: 3250 - total flux cleaned = 0.00351074 Jy ! Component: 3300 - total flux cleaned = 0.00351106 Jy ! Component: 3350 - total flux cleaned = 0.00359685 Jy ! Component: 3400 - total flux cleaned = 0.00370998 Jy ! Component: 3450 - total flux cleaned = 0.00375201 Jy ! Component: 3500 - total flux cleaned = 0.00379379 Jy ! Component: 3550 - total flux cleaned = 0.00382146 Jy ! Component: 3600 - total flux cleaned = 0.00382137 Jy ! Component: 3650 - total flux cleaned = 0.0038897 Jy ! Component: 3700 - total flux cleaned = 0.00388957 Jy ! Component: 3750 - total flux cleaned = 0.00397028 Jy ! Component: 3800 - total flux cleaned = 0.00399712 Jy ! Component: 3850 - total flux cleaned = 0.00405025 Jy ! Component: 3900 - total flux cleaned = 0.0041161 Jy ! Component: 3950 - total flux cleaned = 0.00415528 Jy ! Component: 4000 - total flux cleaned = 0.00418121 Jy ! Component: 4050 - total flux cleaned = 0.00420714 Jy ! Total flux subtracted in 4096 components = 0.00425834 Jy ! Clean residual min=-0.000715 max=0.000686 Jy/beam ! Clean residual mean=0.000000 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.278192 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 416 components and 0.278192 Jy ![Exited script file: muppet] wmap "J0138-0540_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.849 x 7.123 at -2.662 degrees (North through East) ! Clean map min=-0.00157 max=0.19743 Jy/beam ! Writing clean map to FITS file: J0138-0540_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.197428 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229641 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.348949 0.348949 0.697899 1.3958 2.7916 5.58319 11.1664 22.3328 44.6655 89.3311 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.197 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.849 x 7.123 at -2.662 degrees (North through East) ! Clean map min=-0.00157 max=0.19743 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0138-0540_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:57:33 2019