! Started logfile: J0136+4751_X_2017_05_31_pus_uvs.log on Tue Feb 5 10:43:19 2019 obs J0136+4751_X_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0136+4751_X_2017_05_31_pus_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.801961 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1698 lines of history. ! ! Reading 14724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0136+4751_X_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968789Jy sigma=0.008372 ! Fit after self-cal, rms=0.954513Jy sigma=0.008254 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7012 mas, bmaj=1.318 mas, bpa=-5.676 degrees ! Estimated noise=1071.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.43031 Jy ! Component: 100 - total flux cleaned = 1.76016 Jy ! Total flux subtracted in 100 components = 1.76016 Jy ! Clean residual min=-0.042967 max=0.123379 Jy/beam ! Clean residual mean=-0.000010 rms=0.012452 Jy/beam ! Combined flux in latest and established models = 1.76016 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.76016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.309199Jy sigma=0.002672 ! Fit after self-cal, rms=0.309155Jy sigma=0.002672 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131344 Jy ! Component: 100 - total flux cleaned = 0.197598 Jy ! Total flux subtracted in 100 components = 0.197598 Jy ! Clean residual min=-0.038207 max=0.057003 Jy/beam ! Clean residual mean=-0.000065 rms=0.008801 Jy/beam ! Combined flux in latest and established models = 1.95776 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 1.95776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.219673Jy sigma=0.001876 ! Fit after self-cal, rms=0.219559Jy sigma=0.001875 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-1.6, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573505 Jy ! Component: 100 - total flux cleaned = 0.0926741 Jy ! Total flux subtracted in 100 components = 0.0926741 Jy ! Clean residual min=-0.040450 max=0.030726 Jy/beam ! Clean residual mean=-0.000039 rms=0.007692 Jy/beam ! Combined flux in latest and established models = 2.05043 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 2.05043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.196531Jy sigma=0.001662 ! Fit after self-cal, rms=0.195224Jy sigma=0.001650 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8914 mas, bmaj=1.651 mas, bpa=-2.871 degrees ! Estimated noise=686.065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0512156 Jy ! Component: 100 - total flux cleaned = 0.082298 Jy ! Component: 150 - total flux cleaned = 0.103252 Jy ! Component: 200 - total flux cleaned = 0.11767 Jy ! Total flux subtracted in 200 components = 0.11767 Jy ! Clean residual min=-0.051179 max=0.028258 Jy/beam ! Clean residual mean=0.000046 rms=0.008475 Jy/beam ! Combined flux in latest and established models = 2.1681 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 45 components and 2.1681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.180945Jy sigma=0.001512 ! Fit after self-cal, rms=0.180209Jy sigma=0.001505 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.00 KP 0.99 ! LA 0.98 MK 0.96 NL 0.95 OV 1.09 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.01 KP 0.94 ! LA 0.98 MK 0.96 NL 0.95 OV 1.11 ! PT 1.08 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.03 KP 0.89 ! LA 1.00 MK 0.99 NL 0.96 OV 1.08 ! PT 1.04 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.00 KP 0.98 ! LA 1.00 MK 0.99 NL 0.96 OV 1.10 ! PT 1.05 SC 1.07 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.95 KP 0.98 ! LA 1.00 MK 1.01 NL 0.87 OV 1.09 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.99 KP 0.96 ! LA 1.00 MK 0.98 NL 0.87 OV 1.00 ! PT 1.04 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.05 KP 0.97 ! LA 1.01 MK 1.01 NL 0.86 OV 1.01 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.05 KP 0.97 ! LA 0.98 MK 0.99 NL 0.87 OV 1.02 ! PT 1.06 SC 1.07 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.06 KP 0.97 ! LA 1.00 MK 0.99 NL 0.86 OV 1.01 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.03 KP 0.98 ! LA 1.02 MK 1.01 NL 0.88 OV 1.01 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.04 KP 0.89 ! LA 1.02 MK 1.01 NL 0.88 OV 1.03 ! PT 1.07 SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 0.93 ! LA 1.00 MK 1.03 NL 0.88 OV 1.08 ! PT 1.08 SC 1.04 ! ! ! Fit before self-cal, rms=0.180209Jy sigma=0.001505 ! Fit after self-cal, rms=0.102877Jy sigma=0.000819 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8976 mas, bmaj=1.657 mas, bpa=-3.445 degrees ! Estimated noise=684.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00790188 Jy ! Component: 100 - total flux cleaned = -0.00633306 Jy ! Component: 150 - total flux cleaned = -0.00500752 Jy ! Component: 200 - total flux cleaned = -0.00360111 Jy ! Total flux subtracted in 200 components = -0.00360111 Jy ! Clean residual min=-0.009881 max=0.012024 Jy/beam ! Clean residual mean=-0.000009 rms=0.002540 Jy/beam ! Combined flux in latest and established models = 2.1645 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 2.1645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099232Jy sigma=0.000794 ! Fit after self-cal, rms=0.099063Jy sigma=0.000792 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099063Jy sigma=0.000792 ! Fit after self-cal, rms=0.086037Jy sigma=0.000698 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8978 mas, bmaj=1.658 mas, bpa=-3.179 degrees ! Estimated noise=684.672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395875 Jy ! Component: 100 - total flux cleaned = 0.00551033 Jy ! Component: 150 - total flux cleaned = 0.0053674 Jy ! Component: 200 - total flux cleaned = 0.00536258 Jy ! Total flux subtracted in 200 components = 0.00536258 Jy ! Clean residual min=-0.004458 max=0.008254 Jy/beam ! Clean residual mean=-0.000037 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 2.16986 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 2.16986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085154Jy sigma=0.000691 ! Fit after self-cal, rms=0.085090Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692473 Jy ! Component: 100 - total flux cleaned = 0.00831756 Jy ! Component: 150 - total flux cleaned = 0.0089231 Jy ! Component: 200 - total flux cleaned = 0.00919054 Jy ! Total flux subtracted in 200 components = 0.00919054 Jy ! Clean residual min=-0.004087 max=0.006682 Jy/beam ! Clean residual mean=-0.000025 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 2.17905 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 75 components and 2.17905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084041Jy sigma=0.000681 ! Fit after self-cal, rms=0.083971Jy sigma=0.000681 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-2.2, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00640102 Jy ! Component: 100 - total flux cleaned = 0.00910545 Jy ! Component: 150 - total flux cleaned = 0.0106819 Jy ! Component: 200 - total flux cleaned = 0.0117475 Jy ! Total flux subtracted in 200 components = 0.0117475 Jy ! Clean residual min=-0.003465 max=0.004704 Jy/beam ! Clean residual mean=-0.000014 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 2.1908 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 2.1908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083378Jy sigma=0.000676 ! Fit after self-cal, rms=0.083365Jy sigma=0.000675 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-4.2, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268326 Jy ! Component: 100 - total flux cleaned = 0.00453255 Jy ! Component: 150 - total flux cleaned = 0.00555487 Jy ! Component: 200 - total flux cleaned = 0.00602566 Jy ! Total flux subtracted in 200 components = 0.00602566 Jy ! Clean residual min=-0.003012 max=0.004035 Jy/beam ! Clean residual mean=-0.000010 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 2.19683 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 2.19682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083042Jy sigma=0.000673 ! Fit after self-cal, rms=0.083034Jy sigma=0.000673 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348846 Jy ! Component: 100 - total flux cleaned = 0.00416545 Jy ! Component: 150 - total flux cleaned = 0.00417344 Jy ! Component: 200 - total flux cleaned = 0.00435379 Jy ! Total flux subtracted in 200 components = 0.00435379 Jy ! Clean residual min=-0.002752 max=0.002747 Jy/beam ! Clean residual mean=-0.000006 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 2.20118 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 118 components and 2.20118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082749Jy sigma=0.000670 ! Fit after self-cal, rms=0.082744Jy sigma=0.000670 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082744Jy sigma=0.000670 ! Fit after self-cal, rms=0.082542Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.898 mas, bmaj=1.659 mas, bpa=-3.162 degrees ! Estimated noise=684.433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207834 Jy ! Component: 100 - total flux cleaned = 0.00352611 Jy ! Component: 150 - total flux cleaned = 0.00420969 Jy ! Component: 200 - total flux cleaned = 0.00460113 Jy ! Total flux subtracted in 200 components = 0.00460113 Jy ! Clean residual min=-0.002683 max=0.002466 Jy/beam ! Clean residual mean=-0.000009 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 2.20578 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 126 components and 2.20578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082337Jy sigma=0.000667 ! Fit after self-cal, rms=0.082336Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000872218 Jy ! Component: 100 - total flux cleaned = 0.00137214 Jy ! Component: 150 - total flux cleaned = 0.00190896 Jy ! Component: 200 - total flux cleaned = 0.00216464 Jy ! Total flux subtracted in 200 components = 0.00216464 Jy ! Clean residual min=-0.002583 max=0.002324 Jy/beam ! Clean residual mean=-0.000007 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 2.20794 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 134 components and 2.20794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082225Jy sigma=0.000666 ! Fit after self-cal, rms=0.082225Jy sigma=0.000666 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082225Jy sigma=0.000666 ! Fit after self-cal, rms=0.082199Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.16 mas, bmaj=2.711 mas, bpa=-9.574 degrees ! Estimated noise=880.808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301136 Jy ! Component: 100 - total flux cleaned = 0.00460523 Jy ! Component: 150 - total flux cleaned = 0.00494383 Jy ! Component: 200 - total flux cleaned = 0.00506853 Jy ! Total flux subtracted in 200 components = 0.00506853 Jy ! Clean residual min=-0.002793 max=0.002111 Jy/beam ! Clean residual mean=-0.000006 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 2.21301 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 150 components and 2.21301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082171Jy sigma=0.000666 ! Fit after self-cal, rms=0.082164Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000726026 Jy ! Component: 100 - total flux cleaned = 0.000728262 Jy ! Component: 150 - total flux cleaned = 0.0007307 Jy ! Component: 200 - total flux cleaned = 0.000789547 Jy ! Total flux subtracted in 200 components = 0.000789547 Jy ! Clean residual min=-0.002698 max=0.002143 Jy/beam ! Clean residual mean=-0.000004 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 2.2138 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 161 components and 2.2138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082154Jy sigma=0.000666 ! Fit after self-cal, rms=0.082153Jy sigma=0.000666 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8981 mas, bmaj=1.659 mas, bpa=-3.157 degrees ! Estimated noise=684.362 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8981 x 1.659 at -3.157 degrees (North through East) ! Clean map min=-0.0022176 max=1.8837 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082153Jy sigma=0.000666 ! Fit after self-cal, rms=0.075327Jy sigma=0.000607 ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8982 mas, bmaj=1.659 mas, bpa=-3.143 degrees ! Estimated noise=684.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.41194e-05 Jy ! Component: 100 - total flux cleaned = -3.93781e-05 Jy ! Component: 150 - total flux cleaned = 8.22743e-05 Jy ! Component: 200 - total flux cleaned = 0.000138604 Jy ! Total flux subtracted in 200 components = 0.000138604 Jy ! Clean residual min=-0.002465 max=0.002215 Jy/beam ! Clean residual mean=-0.000005 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 2.21394 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 170 components and 2.21394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075229Jy sigma=0.000606 ! Fit after self-cal, rms=0.075229Jy sigma=0.000606 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339046 Jy ! Component: 100 - total flux cleaned = 0.000389449 Jy ! Component: 150 - total flux cleaned = 0.000439375 Jy ! Component: 200 - total flux cleaned = 0.000485836 Jy ! Total flux subtracted in 200 components = 0.000485836 Jy ! Clean residual min=-0.002391 max=0.002141 Jy/beam ! Clean residual mean=-0.000005 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 2.21443 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 177 components and 2.21443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075164Jy sigma=0.000605 ! Fit after self-cal, rms=0.075165Jy sigma=0.000605 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075165Jy sigma=0.000605 ! Fit after self-cal, rms=0.075154Jy sigma=0.000605 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7038 mas, bmaj=1.322 mas, bpa=-5.887 degrees ! Estimated noise=1079.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.44074 Jy ! Component: 100 - total flux cleaned = 1.77046 Jy ! Component: 150 - total flux cleaned = 1.89932 Jy ! Component: 200 - total flux cleaned = 1.97338 Jy ! Total flux subtracted in 200 components = 1.97338 Jy ! Clean residual min=-0.014683 max=0.038741 Jy/beam ! Clean residual mean=-0.000049 rms=0.004490 Jy/beam ! Combined flux in latest and established models = 1.97338 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.97338 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8983 mas, bmaj=1.659 mas, bpa=-3.143 degrees ! Estimated noise=684.402 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0710007 Jy ! Component: 100 - total flux cleaned = 0.114227 Jy ! Component: 150 - total flux cleaned = 0.143382 Jy ! Component: 200 - total flux cleaned = 0.163841 Jy ! Total flux subtracted in 200 components = 0.163841 Jy ! Clean residual min=-0.004971 max=0.011407 Jy/beam ! Clean residual mean=-0.000061 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 2.13722 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 57 components and 2.13722 Jy ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146382 Jy ! Component: 100 - total flux cleaned = 0.0253798 Jy ! Component: 150 - total flux cleaned = 0.0337989 Jy ! Component: 200 - total flux cleaned = 0.0408672 Jy ! Total flux subtracted in 200 components = 0.0408672 Jy ! Clean residual min=-0.003292 max=0.004975 Jy/beam ! Clean residual mean=-0.000034 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 2.17808 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 80 components and 2.17808 Jy ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-4.6, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00622842 Jy ! Component: 100 - total flux cleaned = 0.011548 Jy ! Component: 150 - total flux cleaned = 0.0161622 Jy ! Component: 200 - total flux cleaned = 0.0195598 Jy ! Total flux subtracted in 200 components = 0.0195598 Jy ! Clean residual min=-0.002732 max=0.003429 Jy/beam ! Clean residual mean=-0.000018 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 2.19764 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 98 components and 2.19764 Jy ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (4.6, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310053 Jy ! Component: 100 - total flux cleaned = 0.00535642 Jy ! Component: 150 - total flux cleaned = 0.00740893 Jy ! Component: 200 - total flux cleaned = 0.00928012 Jy ! Total flux subtracted in 200 components = 0.00928012 Jy ! Clean residual min=-0.002467 max=0.002976 Jy/beam ! Clean residual mean=-0.000011 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 2.20692 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 113 components and 2.20692 Jy ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (3.8, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259081 Jy ! Component: 100 - total flux cleaned = 0.00400147 Jy ! Component: 150 - total flux cleaned = 0.00504271 Jy ! Component: 200 - total flux cleaned = 0.00585665 Jy ! Total flux subtracted in 200 components = 0.00585665 Jy ! Clean residual min=-0.002344 max=0.002211 Jy/beam ! Clean residual mean=-0.000007 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 2.21278 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 130 components and 2.21278 Jy ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.16 mas, bmaj=2.711 mas, bpa=-9.567 degrees ! Estimated noise=880.728 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261344 Jy ! Component: 100 - total flux cleaned = 0.00427811 Jy ! Component: 150 - total flux cleaned = 0.00512296 Jy ! Component: 200 - total flux cleaned = 0.00553669 Jy ! Total flux subtracted in 200 components = 0.00553669 Jy ! Clean residual min=-0.002187 max=0.002358 Jy/beam ! Clean residual mean=-0.000006 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 2.21832 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188399 Jy ! Component: 100 - total flux cleaned = 0.000362796 Jy ! Component: 150 - total flux cleaned = 0.000443568 Jy ! Component: 200 - total flux cleaned = 0.000444117 Jy ! Total flux subtracted in 200 components = 0.000444117 Jy ! Clean residual min=-0.002167 max=0.002256 Jy/beam ! Clean residual mean=-0.000004 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 2.21876 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 200 components and 2.21876 Jy ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8983 mas, bmaj=1.659 mas, bpa=-3.143 degrees ! Estimated noise=684.402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00066268 Jy ! Component: 100 - total flux cleaned = -0.000730386 Jy ! Component: 150 - total flux cleaned = -0.000797357 Jy ! Component: 200 - total flux cleaned = -0.00086351 Jy ! Total flux subtracted in 200 components = -0.00086351 Jy ! Clean residual min=-0.002193 max=0.002038 Jy/beam ! Clean residual mean=-0.000002 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 2.2179 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 212 components and 2.2179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075424Jy sigma=0.000607 ! Fit after self-cal, rms=0.075377Jy sigma=0.000607 wmodel J0136+4751_X_2017_05_31_pus_map.mod ! Writing 212 model components to file: J0136+4751_X_2017_05_31_pus_map.mod wobs J0136+4751_X_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0136+4751_X_2017_05_31_pus_uvs.fits wwins J0136+4751_X_2017_05_31_pus_map.win ! wwins: Wrote 9 windows to J0136+4751_X_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.53771e-05 Jy ! Component: 100 - total flux cleaned = -5.57861e-05 Jy ! Component: 150 - total flux cleaned = 8.25498e-06 Jy ! Component: 200 - total flux cleaned = 6.99468e-05 Jy ! Component: 250 - total flux cleaned = 0.000130968 Jy ! Component: 300 - total flux cleaned = 0.000190097 Jy ! Component: 350 - total flux cleaned = 0.000219083 Jy ! Component: 400 - total flux cleaned = 0.00030446 Jy ! Component: 450 - total flux cleaned = 0.000360303 Jy ! Component: 500 - total flux cleaned = 0.000469306 Jy ! Component: 550 - total flux cleaned = 0.000442602 Jy ! Component: 600 - total flux cleaned = 0.000442639 Jy ! Component: 650 - total flux cleaned = 0.000599329 Jy ! Component: 700 - total flux cleaned = 0.000753344 Jy ! Component: 750 - total flux cleaned = 0.000904765 Jy ! Component: 800 - total flux cleaned = 0.000929683 Jy ! Component: 850 - total flux cleaned = 0.00100404 Jy ! Component: 900 - total flux cleaned = 0.00112619 Jy ! Component: 950 - total flux cleaned = 0.00119825 Jy ! Component: 1000 - total flux cleaned = 0.00117455 Jy ! Component: 1050 - total flux cleaned = 0.00124595 Jy ! Component: 1100 - total flux cleaned = 0.00131628 Jy ! Component: 1150 - total flux cleaned = 0.00131613 Jy ! Component: 1200 - total flux cleaned = 0.00133889 Jy ! Component: 1250 - total flux cleaned = 0.00138422 Jy ! Component: 1300 - total flux cleaned = 0.00142899 Jy ! Component: 1350 - total flux cleaned = 0.00145162 Jy ! Component: 1400 - total flux cleaned = 0.00149548 Jy ! Component: 1450 - total flux cleaned = 0.00151714 Jy ! Component: 1500 - total flux cleaned = 0.00166943 Jy ! Component: 1550 - total flux cleaned = 0.0016692 Jy ! Component: 1600 - total flux cleaned = 0.00173357 Jy ! Component: 1650 - total flux cleaned = 0.00186117 Jy ! Component: 1700 - total flux cleaned = 0.00186101 Jy ! Component: 1750 - total flux cleaned = 0.00179834 Jy ! Component: 1800 - total flux cleaned = 0.00188148 Jy ! Component: 1850 - total flux cleaned = 0.00194314 Jy ! Component: 1900 - total flux cleaned = 0.00194311 Jy ! Component: 1950 - total flux cleaned = 0.00200386 Jy ! Component: 2000 - total flux cleaned = 0.00202421 Jy ! Total flux subtracted in 2048 components = 0.00204405 Jy ! Clean residual min=-0.000997 max=0.001202 Jy/beam ! Clean residual mean=0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 2.21994 Jy keep ! Adding 157 model components to the UV plane model. ! The established model now contains 368 components and 2.21994 Jy ![Exited script file: muppet] wmap "J0136+4751_X_2017_05_31_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8983 x 1.659 at -3.143 degrees (North through East) ! Clean map min=-0.0017316 max=1.8847 Jy/beam ! Writing clean map to FITS file: J0136+4751_X_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.88466 invert ! Inverting map ! Your choice of large map pixels excluded 0.217% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000361095 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.057479 0.057479 0.114958 0.229916 0.459832 0.919664 1.83933 3.67865 7.35731 14.7146 29.4292 58.8585 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.884 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8983 x 1.659 at -3.143 degrees (North through East) ! Clean map min=-0.0017316 max=1.8847 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0136+4751_X_2017_05_31_pus_uvs.log closed on Tue Feb 5 10:43:21 2019