! Started logfile: J0136+4751_X_2017_05_27_pus_uvs.log on Fri May 3 10:28:48 2019 obs J0136+4751_X_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0136+4751_X_2017_05_27_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.847343 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1033 lines of history. ! ! Reading 10524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0136+4751_X_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.884881Jy sigma=0.007881 ! Fit after self-cal, rms=0.878749Jy sigma=0.007827 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7576 mas, bmaj=1.215 mas, bpa=-3.067 degrees ! Estimated noise=1225.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39912 Jy ! Component: 100 - total flux cleaned = 1.72532 Jy ! Total flux subtracted in 100 components = 1.72532 Jy ! Clean residual min=-0.033437 max=0.122357 Jy/beam ! Clean residual mean=-0.000227 rms=0.011135 Jy/beam ! Combined flux in latest and established models = 1.72532 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.72532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.246450Jy sigma=0.002213 ! Fit after self-cal, rms=0.246238Jy sigma=0.002212 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12984 Jy ! Component: 100 - total flux cleaned = 0.195324 Jy ! Total flux subtracted in 100 components = 0.195324 Jy ! Clean residual min=-0.023596 max=0.055460 Jy/beam ! Clean residual mean=-0.000166 rms=0.006200 Jy/beam ! Combined flux in latest and established models = 1.92065 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 1.92065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.151417Jy sigma=0.001334 ! Fit after self-cal, rms=0.150921Jy sigma=0.001331 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-1.6, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0558239 Jy ! Component: 100 - total flux cleaned = 0.0898044 Jy ! Total flux subtracted in 100 components = 0.0898044 Jy ! Clean residual min=-0.019487 max=0.020276 Jy/beam ! Clean residual mean=-0.000095 rms=0.004523 Jy/beam ! Combined flux in latest and established models = 2.01045 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 2.01045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124193Jy sigma=0.001077 ! Fit after self-cal, rms=0.122918Jy sigma=0.001067 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9578 mas, bmaj=1.461 mas, bpa=0.5527 degrees ! Estimated noise=787.086 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347303 Jy ! Component: 100 - total flux cleaned = 0.0572216 Jy ! Component: 150 - total flux cleaned = 0.0728903 Jy ! Component: 200 - total flux cleaned = 0.0840754 Jy ! Total flux subtracted in 200 components = 0.0840754 Jy ! Clean residual min=-0.017684 max=0.015282 Jy/beam ! Clean residual mean=-0.000056 rms=0.003958 Jy/beam ! Combined flux in latest and established models = 2.09453 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 2.09453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111489Jy sigma=0.000956 ! Fit after self-cal, rms=0.110635Jy sigma=0.000949 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.01 KP 1.00 ! LA 0.98 MK 0.99 NL 0.97 OV 1.02 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.98 KP 0.98 ! LA 0.98 MK 0.98 NL 0.97 OV 1.01 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 1.00 ! LA 1.01 MK 1.00 NL 0.96 OV 1.01 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.01 KP 0.99 ! LA 1.01 MK 1.01 NL 0.96 OV 1.01 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.97 KP 1.00 ! LA 1.00 MK 1.02 NL 0.96 OV 1.01 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.00 ! LA 1.00 MK 1.01 NL 0.96 OV 1.01 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 0.98 ! LA 1.01 MK 1.01 NL 0.96 OV 1.01 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.99 KP 0.99 ! LA 0.98 MK 1.00 NL 0.96 OV 1.01 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 KP 0.98 ! LA 1.00 MK 0.98 NL 0.96 OV 1.01 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 0.99 ! LA 1.02 MK 1.00 NL 0.96 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.02 KP 0.99 ! LA 1.00 MK 1.01 NL 0.96 OV 1.00 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.99 KP 0.96 ! LA 0.99 MK 0.99 NL 0.96 OV 1.02 ! PT 1.04 SC 1.04 ! ! ! Fit before self-cal, rms=0.110635Jy sigma=0.000949 ! Fit after self-cal, rms=0.093180Jy sigma=0.000797 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9634 mas, bmaj=1.467 mas, bpa=0.04259 degrees ! Estimated noise=785.776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00788339 Jy ! Component: 100 - total flux cleaned = 0.0103344 Jy ! Component: 150 - total flux cleaned = 0.011592 Jy ! Component: 200 - total flux cleaned = 0.0127765 Jy ! Total flux subtracted in 200 components = 0.0127765 Jy ! Clean residual min=-0.010027 max=0.009604 Jy/beam ! Clean residual mean=-0.000079 rms=0.002558 Jy/beam ! Combined flux in latest and established models = 2.1073 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 2.1073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090908Jy sigma=0.000776 ! Fit after self-cal, rms=0.090636Jy sigma=0.000774 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090636Jy sigma=0.000774 ! Fit after self-cal, rms=0.081406Jy sigma=0.000690 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9634 mas, bmaj=1.466 mas, bpa=0.2338 degrees ! Estimated noise=785.036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321545 Jy ! Component: 100 - total flux cleaned = 0.00479744 Jy ! Component: 150 - total flux cleaned = 0.00542897 Jy ! Component: 200 - total flux cleaned = 0.00587516 Jy ! Total flux subtracted in 200 components = 0.00587516 Jy ! Clean residual min=-0.005038 max=0.007645 Jy/beam ! Clean residual mean=-0.000056 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 2.11318 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 2.11318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080757Jy sigma=0.000684 ! Fit after self-cal, rms=0.080678Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00641037 Jy ! Component: 100 - total flux cleaned = 0.0065979 Jy ! Component: 150 - total flux cleaned = 0.00660897 Jy ! Component: 200 - total flux cleaned = 0.0067366 Jy ! Total flux subtracted in 200 components = 0.0067366 Jy ! Clean residual min=-0.004606 max=0.006619 Jy/beam ! Clean residual mean=-0.000043 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 2.11991 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 2.11991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079900Jy sigma=0.000677 ! Fit after self-cal, rms=0.079835Jy sigma=0.000677 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-3.8, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678523 Jy ! Component: 100 - total flux cleaned = 0.00949512 Jy ! Component: 150 - total flux cleaned = 0.0113014 Jy ! Component: 200 - total flux cleaned = 0.0124288 Jy ! Total flux subtracted in 200 components = 0.0124288 Jy ! Clean residual min=-0.004083 max=0.004259 Jy/beam ! Clean residual mean=-0.000023 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 2.13234 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 2.13234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079148Jy sigma=0.000670 ! Fit after self-cal, rms=0.079121Jy sigma=0.000670 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-5.2, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423489 Jy ! Component: 100 - total flux cleaned = 0.00607302 Jy ! Component: 150 - total flux cleaned = 0.00694776 Jy ! Component: 200 - total flux cleaned = 0.00765065 Jy ! Total flux subtracted in 200 components = 0.00765065 Jy ! Clean residual min=-0.003434 max=0.003667 Jy/beam ! Clean residual mean=-0.000008 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 2.13999 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 105 components and 2.13999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078806Jy sigma=0.000667 ! Fit after self-cal, rms=0.078792Jy sigma=0.000667 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-3.8, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052046 Jy ! Component: 100 - total flux cleaned = -0.000104643 Jy ! Component: 150 - total flux cleaned = 0.000157282 Jy ! Component: 200 - total flux cleaned = 0.000318488 Jy ! Total flux subtracted in 200 components = 0.000318488 Jy ! Clean residual min=-0.003187 max=0.002878 Jy/beam ! Clean residual mean=-0.000006 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 2.14031 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 116 components and 2.14031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078541Jy sigma=0.000665 ! Fit after self-cal, rms=0.078536Jy sigma=0.000665 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078536Jy sigma=0.000665 ! Fit after self-cal, rms=0.078342Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9636 mas, bmaj=1.466 mas, bpa=0.1755 degrees ! Estimated noise=784.749 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137431 Jy ! Component: 100 - total flux cleaned = 0.00245815 Jy ! Component: 150 - total flux cleaned = 0.00309766 Jy ! Component: 200 - total flux cleaned = 0.00353583 Jy ! Total flux subtracted in 200 components = 0.00353583 Jy ! Clean residual min=-0.003080 max=0.002825 Jy/beam ! Clean residual mean=-0.000011 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 2.14385 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 130 components and 2.14385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078169Jy sigma=0.000662 ! Fit after self-cal, rms=0.078162Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000636422 Jy ! Component: 100 - total flux cleaned = 0.00103431 Jy ! Component: 150 - total flux cleaned = 0.00128322 Jy ! Component: 200 - total flux cleaned = 0.00134263 Jy ! Total flux subtracted in 200 components = 0.00134263 Jy ! Clean residual min=-0.002858 max=0.002659 Jy/beam ! Clean residual mean=-0.000008 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 2.14519 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 135 components and 2.14519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078068Jy sigma=0.000661 ! Fit after self-cal, rms=0.078065Jy sigma=0.000661 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078065Jy sigma=0.000661 ! Fit after self-cal, rms=0.078034Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.198 mas, bmaj=2.534 mas, bpa=2.062 degrees ! Estimated noise=995.023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232901 Jy ! Component: 100 - total flux cleaned = 0.00357541 Jy ! Component: 150 - total flux cleaned = 0.00433864 Jy ! Component: 200 - total flux cleaned = 0.00478774 Jy ! Total flux subtracted in 200 components = 0.00478774 Jy ! Clean residual min=-0.002675 max=0.002510 Jy/beam ! Clean residual mean=-0.000005 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 2.14998 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 160 components and 2.14998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078009Jy sigma=0.000661 ! Fit after self-cal, rms=0.078008Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562384 Jy ! Component: 100 - total flux cleaned = 0.000730395 Jy ! Component: 150 - total flux cleaned = 0.000914549 Jy ! Component: 200 - total flux cleaned = 0.000970958 Jy ! Total flux subtracted in 200 components = 0.000970958 Jy ! Clean residual min=-0.002562 max=0.002451 Jy/beam ! Clean residual mean=-0.000000 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 2.15095 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 169 components and 2.15095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077989Jy sigma=0.000660 ! Fit after self-cal, rms=0.077988Jy sigma=0.000660 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9638 mas, bmaj=1.466 mas, bpa=0.1368 degrees ! Estimated noise=784.691 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9638 x 1.466 at 0.1368 degrees (North through East) ! Clean map min=-0.0026677 max=1.8233 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077988Jy sigma=0.000660 ! Fit after self-cal, rms=0.072475Jy sigma=0.000613 ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9638 mas, bmaj=1.466 mas, bpa=0.1427 degrees ! Estimated noise=784.562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000763568 Jy ! Component: 100 - total flux cleaned = -0.000571636 Jy ! Component: 150 - total flux cleaned = -0.000455282 Jy ! Component: 200 - total flux cleaned = -0.000293882 Jy ! Total flux subtracted in 200 components = -0.000293882 Jy ! Clean residual min=-0.002696 max=0.002596 Jy/beam ! Clean residual mean=-0.000003 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 2.15065 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 173 components and 2.15066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072377Jy sigma=0.000612 ! Fit after self-cal, rms=0.072375Jy sigma=0.000612 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259256 Jy ! Component: 100 - total flux cleaned = 0.000355051 Jy ! Component: 150 - total flux cleaned = 0.000401777 Jy ! Component: 200 - total flux cleaned = 0.000490412 Jy ! Total flux subtracted in 200 components = 0.000490412 Jy ! Clean residual min=-0.002623 max=0.002459 Jy/beam ! Clean residual mean=-0.000003 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 2.15115 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 179 components and 2.15115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072318Jy sigma=0.000611 ! Fit after self-cal, rms=0.072317Jy sigma=0.000611 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072317Jy sigma=0.000611 ! Fit after self-cal, rms=0.072303Jy sigma=0.000611 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7615 mas, bmaj=1.222 mas, bpa=-3.506 degrees ! Estimated noise=1225.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39827 Jy ! Component: 100 - total flux cleaned = 1.72035 Jy ! Component: 150 - total flux cleaned = 1.8447 Jy ! Component: 200 - total flux cleaned = 1.91747 Jy ! Total flux subtracted in 200 components = 1.91747 Jy ! Clean residual min=-0.014508 max=0.038823 Jy/beam ! Clean residual mean=-0.000155 rms=0.004688 Jy/beam ! Combined flux in latest and established models = 1.91747 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.91747 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.964 mas, bmaj=1.466 mas, bpa=0.1141 degrees ! Estimated noise=784.542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0657668 Jy ! Component: 100 - total flux cleaned = 0.107145 Jy ! Component: 150 - total flux cleaned = 0.135255 Jy ! Component: 200 - total flux cleaned = 0.155053 Jy ! Total flux subtracted in 200 components = 0.155053 Jy ! Clean residual min=-0.005272 max=0.011054 Jy/beam ! Clean residual mean=-0.000147 rms=0.001811 Jy/beam ! Combined flux in latest and established models = 2.07252 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 49 components and 2.07252 Jy ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142314 Jy ! Component: 100 - total flux cleaned = 0.0248967 Jy ! Component: 150 - total flux cleaned = 0.0336798 Jy ! Component: 200 - total flux cleaned = 0.0411138 Jy ! Total flux subtracted in 200 components = 0.0411138 Jy ! Clean residual min=-0.003638 max=0.005422 Jy/beam ! Clean residual mean=-0.000072 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 2.11364 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 71 components and 2.11364 Jy ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-2, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00650471 Jy ! Component: 100 - total flux cleaned = 0.0119779 Jy ! Component: 150 - total flux cleaned = 0.0166718 Jy ! Component: 200 - total flux cleaned = 0.0207213 Jy ! Total flux subtracted in 200 components = 0.0207213 Jy ! Clean residual min=-0.003016 max=0.003626 Jy/beam ! Clean residual mean=-0.000034 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 2.13436 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 82 components and 2.13436 Jy ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-1, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403716 Jy ! Component: 100 - total flux cleaned = 0.0072761 Jy ! Component: 150 - total flux cleaned = 0.00947015 Jy ! Component: 200 - total flux cleaned = 0.0111415 Jy ! Total flux subtracted in 200 components = 0.0111415 Jy ! Clean residual min=-0.002614 max=0.002709 Jy/beam ! Clean residual mean=-0.000016 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 2.1455 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 98 components and 2.1455 Jy ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.198 mas, bmaj=2.533 mas, bpa=2.068 degrees ! Estimated noise=994.784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329773 Jy ! Component: 100 - total flux cleaned = 0.00535517 Jy ! Component: 150 - total flux cleaned = 0.00637853 Jy ! Component: 200 - total flux cleaned = 0.00725321 Jy ! Total flux subtracted in 200 components = 0.00725321 Jy ! Clean residual min=-0.002478 max=0.002115 Jy/beam ! Clean residual mean=-0.000006 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 2.15275 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703137 Jy ! Component: 100 - total flux cleaned = 0.00127182 Jy ! Component: 150 - total flux cleaned = 0.00163981 Jy ! Component: 200 - total flux cleaned = 0.00201213 Jy ! Total flux subtracted in 200 components = 0.00201213 Jy ! Clean residual min=-0.002294 max=0.002070 Jy/beam ! Clean residual mean=0.000002 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 2.15476 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 168 components and 2.15476 Jy ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.964 mas, bmaj=1.466 mas, bpa=0.1141 degrees ! Estimated noise=784.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000420825 Jy ! Component: 100 - total flux cleaned = -0.000651526 Jy ! Component: 150 - total flux cleaned = -0.00065318 Jy ! Component: 200 - total flux cleaned = -0.000585399 Jy ! Total flux subtracted in 200 components = -0.000585399 Jy ! Clean residual min=-0.002279 max=0.002495 Jy/beam ! Clean residual mean=-0.000000 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 2.15418 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 181 components and 2.15418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072501Jy sigma=0.000612 ! Fit after self-cal, rms=0.072441Jy sigma=0.000612 wmodel J0136+4751_X_2017_05_27_pus_map.mod ! Writing 181 model components to file: J0136+4751_X_2017_05_27_pus_map.mod wobs J0136+4751_X_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0136+4751_X_2017_05_27_pus_uvs.fits wwins J0136+4751_X_2017_05_27_pus_map.win ! wwins: Wrote 8 windows to J0136+4751_X_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504838 Jy ! Component: 100 - total flux cleaned = 0.000588715 Jy ! Component: 150 - total flux cleaned = 0.000511333 Jy ! Component: 200 - total flux cleaned = 0.000286666 Jy ! Component: 250 - total flux cleaned = 0.000142067 Jy ! Component: 300 - total flux cleaned = 0.000106203 Jy ! Component: 350 - total flux cleaned = 0.00010604 Jy ! Component: 400 - total flux cleaned = 0.000105516 Jy ! Component: 450 - total flux cleaned = 0.000104407 Jy ! Component: 500 - total flux cleaned = 7.26127e-05 Jy ! Component: 550 - total flux cleaned = 0.00023013 Jy ! Component: 600 - total flux cleaned = 0.000322462 Jy ! Component: 650 - total flux cleaned = 0.000291153 Jy ! Component: 700 - total flux cleaned = 0.000381152 Jy ! Component: 750 - total flux cleaned = 0.000439918 Jy ! Component: 800 - total flux cleaned = 0.000498207 Jy ! Component: 850 - total flux cleaned = 0.000583927 Jy ! Component: 900 - total flux cleaned = 0.00064065 Jy ! Component: 950 - total flux cleaned = 0.000723997 Jy ! Component: 1000 - total flux cleaned = 0.000861376 Jy ! Component: 1050 - total flux cleaned = 0.000861468 Jy ! Component: 1100 - total flux cleaned = 0.000969339 Jy ! Component: 1150 - total flux cleaned = 0.00102265 Jy ! Component: 1200 - total flux cleaned = 0.00107517 Jy ! Component: 1250 - total flux cleaned = 0.00117859 Jy ! Component: 1300 - total flux cleaned = 0.0012042 Jy ! Component: 1350 - total flux cleaned = 0.00122953 Jy ! Component: 1400 - total flux cleaned = 0.00122979 Jy ! Component: 1450 - total flux cleaned = 0.0014049 Jy ! Component: 1500 - total flux cleaned = 0.00142961 Jy ! Component: 1550 - total flux cleaned = 0.00147853 Jy ! Component: 1600 - total flux cleaned = 0.00150271 Jy ! Component: 1650 - total flux cleaned = 0.00159867 Jy ! Component: 1700 - total flux cleaned = 0.0016461 Jy ! Component: 1750 - total flux cleaned = 0.00159886 Jy ! Component: 1800 - total flux cleaned = 0.00171613 Jy ! Component: 1850 - total flux cleaned = 0.00180887 Jy ! Component: 1900 - total flux cleaned = 0.00173986 Jy ! Component: 1950 - total flux cleaned = 0.00180835 Jy ! Component: 2000 - total flux cleaned = 0.00183099 Jy ! Total flux subtracted in 2048 components = 0.00187613 Jy ! Clean residual min=-0.001118 max=0.001390 Jy/beam ! Clean residual mean=0.000003 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 2.15605 Jy keep ! Adding 158 model components to the UV plane model. ! The established model now contains 339 components and 2.15605 Jy ![Exited script file: muppet] wmap "J0136+4751_X_2017_05_27_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.964 x 1.466 at 0.1141 degrees (North through East) ! Clean map min=-0.0018465 max=1.8237 Jy/beam ! Writing clean map to FITS file: J0136+4751_X_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.82365 invert ! Inverting map ! Your choice of large map pixels excluded 0.114% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000412491 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0678569 0.0678569 0.135714 0.271428 0.542856 1.08571 2.17142 4.34284 8.68569 17.3714 34.7428 69.4855 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.823 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.964 x 1.466 at 0.1141 degrees (North through East) ! Clean map min=-0.0018465 max=1.8237 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0136+4751_X_2017_05_27_pus_uvs.log closed on Fri May 3 10:28:50 2019