! Started logfile: J0136+4751_S_2017_09_26_pus_uvs.log on Sat May 11 12:53:34 2019 obs J0136+4751_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0136+4751_S_2017_09_26_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.700855 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 1312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0136+4751_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.656271Jy sigma=0.005527 ! Fit after self-cal, rms=0.639830Jy sigma=0.005396 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.927 mas, bmaj=10.78 mas, bpa=37.28 degrees ! Estimated noise=2946.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.13891 Jy ! Component: 100 - total flux cleaned = 1.43263 Jy ! Total flux subtracted in 100 components = 1.43263 Jy ! Clean residual min=-0.089139 max=0.133641 Jy/beam ! Clean residual mean=-0.000804 rms=0.030661 Jy/beam ! Combined flux in latest and established models = 1.43263 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.43263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366745Jy sigma=0.002668 ! Fit after self-cal, rms=0.366197Jy sigma=0.002665 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.56 mas, bmaj=11.18 mas, bpa=35.84 degrees ! Estimated noise=2525.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152214 Jy ! Component: 100 - total flux cleaned = 0.183541 Jy ! Component: 150 - total flux cleaned = 0.192724 Jy ! Component: 200 - total flux cleaned = 0.20257 Jy ! Total flux subtracted in 200 components = 0.20257 Jy ! Clean residual min=-0.063026 max=0.077099 Jy/beam ! Clean residual mean=-0.000574 rms=0.017565 Jy/beam ! Combined flux in latest and established models = 1.6352 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 1.6352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295058Jy sigma=0.001959 ! Fit after self-cal, rms=0.293975Jy sigma=0.001949 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 1.00* KP 1.03 ! LA 0.98 MK 1.02 NL 0.91 OV 1.03 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 1.10 HN 1.00* KP 0.99 ! LA 0.96 MK 1.03 NL 1.05 OV 1.06 ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.12 HN 1.00* KP 0.98 ! LA 0.97 MK 1.04 NL 0.99 OV 0.97 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.293975Jy sigma=0.001949 ! Fit after self-cal, rms=0.098519Jy sigma=0.000843 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.582 mas, bmaj=10.91 mas, bpa=35.83 degrees ! Estimated noise=2493.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.5, -85.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353764 Jy ! Component: 100 - total flux cleaned = 0.0441777 Jy ! Component: 150 - total flux cleaned = 0.0474545 Jy ! Component: 200 - total flux cleaned = 0.0492446 Jy ! Total flux subtracted in 200 components = 0.0492446 Jy ! Clean residual min=-0.013120 max=0.013251 Jy/beam ! Clean residual mean=0.000023 rms=0.003835 Jy/beam ! Combined flux in latest and established models = 1.68445 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 54 components and 1.68445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085518Jy sigma=0.000726 ! Fit after self-cal, rms=0.085118Jy sigma=0.000722 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085118Jy sigma=0.000722 ! Fit after self-cal, rms=0.084286Jy sigma=0.000717 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.581 mas, bmaj=10.89 mas, bpa=35.83 degrees ! Estimated noise=2489.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00978977 Jy ! Component: 100 - total flux cleaned = 0.0125246 Jy ! Component: 150 - total flux cleaned = 0.0140496 Jy ! Component: 200 - total flux cleaned = 0.0147835 Jy ! Total flux subtracted in 200 components = 0.0147835 Jy ! Clean residual min=-0.010631 max=0.010860 Jy/beam ! Clean residual mean=0.000020 rms=0.002920 Jy/beam ! Combined flux in latest and established models = 1.69923 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 1.69923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082646Jy sigma=0.000702 ! Fit after self-cal, rms=0.082565Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661375 Jy ! Component: 100 - total flux cleaned = 0.00158018 Jy ! Component: 150 - total flux cleaned = 0.0018547 Jy ! Component: 200 - total flux cleaned = 0.00173138 Jy ! Total flux subtracted in 200 components = 0.00173138 Jy ! Clean residual min=-0.009999 max=0.010198 Jy/beam ! Clean residual mean=0.000026 rms=0.002681 Jy/beam ! Combined flux in latest and established models = 1.70096 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 87 components and 1.70096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082092Jy sigma=0.000697 ! Fit after self-cal, rms=0.082061Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082061Jy sigma=0.000696 ! Fit after self-cal, rms=0.081663Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.581 mas, bmaj=10.87 mas, bpa=35.83 degrees ! Estimated noise=2487.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518845 Jy ! Component: 100 - total flux cleaned = 0.00708401 Jy ! Component: 150 - total flux cleaned = 0.00763816 Jy ! Component: 200 - total flux cleaned = 0.00804691 Jy ! Total flux subtracted in 200 components = 0.00804691 Jy ! Clean residual min=-0.008917 max=0.009070 Jy/beam ! Clean residual mean=0.000011 rms=0.002322 Jy/beam ! Combined flux in latest and established models = 1.70901 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 105 components and 1.70901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081224Jy sigma=0.000690 ! Fit after self-cal, rms=0.081215Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104318 Jy ! Component: 100 - total flux cleaned = 1.07764e-05 Jy ! Component: 150 - total flux cleaned = -0.000167576 Jy ! Component: 200 - total flux cleaned = -0.000253908 Jy ! Total flux subtracted in 200 components = -0.000253908 Jy ! Clean residual min=-0.008467 max=0.008769 Jy/beam ! Clean residual mean=0.000010 rms=0.002237 Jy/beam ! Combined flux in latest and established models = 1.70875 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 116 components and 1.70875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081025Jy sigma=0.000688 ! Fit after self-cal, rms=0.081027Jy sigma=0.000688 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081027Jy sigma=0.000688 ! Fit after self-cal, rms=0.080905Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.229 mas, bmaj=11.51 mas, bpa=39.75 degrees ! Estimated noise=2663.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370873 Jy ! Component: 100 - total flux cleaned = 0.00523484 Jy ! Component: 150 - total flux cleaned = 0.00566592 Jy ! Component: 200 - total flux cleaned = 0.00590731 Jy ! Total flux subtracted in 200 components = 0.00590731 Jy ! Clean residual min=-0.007424 max=0.007316 Jy/beam ! Clean residual mean=-0.000009 rms=0.002287 Jy/beam ! Combined flux in latest and established models = 1.71466 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 134 components and 1.71466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080770Jy sigma=0.000686 ! Fit after self-cal, rms=0.080763Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510158 Jy ! Component: 100 - total flux cleaned = 0.000585974 Jy ! Component: 150 - total flux cleaned = 0.000585653 Jy ! Component: 200 - total flux cleaned = 0.000654606 Jy ! Total flux subtracted in 200 components = 0.000654606 Jy ! Clean residual min=-0.007108 max=0.007087 Jy/beam ! Clean residual mean=-0.000006 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 1.71532 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 147 components and 1.71532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080674Jy sigma=0.000685 ! Fit after self-cal, rms=0.080676Jy sigma=0.000685 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.58 mas, bmaj=10.87 mas, bpa=35.83 degrees ! Estimated noise=2486.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.58 x 10.87 at 35.83 degrees (North through East) ! Clean map min=-0.011193 max=1.4902 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080676Jy sigma=0.000685 ! Fit after self-cal, rms=0.072300Jy sigma=0.000614 ! Inverting map and beam ! Estimated beam: bmin=5.579 mas, bmaj=10.86 mas, bpa=35.82 degrees ! Estimated noise=2486.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027454 Jy ! Component: 100 - total flux cleaned = 0.00309847 Jy ! Component: 150 - total flux cleaned = 0.00301679 Jy ! Component: 200 - total flux cleaned = 0.00309309 Jy ! Total flux subtracted in 200 components = 0.00309309 Jy ! Clean residual min=-0.007562 max=0.008300 Jy/beam ! Clean residual mean=-0.000005 rms=0.001967 Jy/beam ! Combined flux in latest and established models = 1.71841 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 166 components and 1.71841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072085Jy sigma=0.000612 ! Fit after self-cal, rms=0.072096Jy sigma=0.000612 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.73097e-05 Jy ! Component: 100 - total flux cleaned = -0.000163034 Jy ! Component: 150 - total flux cleaned = -0.000165603 Jy ! Component: 200 - total flux cleaned = -0.000234388 Jy ! Total flux subtracted in 200 components = -0.000234388 Jy ! Clean residual min=-0.007312 max=0.008195 Jy/beam ! Clean residual mean=-0.000007 rms=0.001939 Jy/beam ! Combined flux in latest and established models = 1.71817 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 169 components and 1.71817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071943Jy sigma=0.000611 ! Fit after self-cal, rms=0.071955Jy sigma=0.000611 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071955Jy sigma=0.000611 ! Fit after self-cal, rms=0.071927Jy sigma=0.000611 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.97 mas, bmaj=10.54 mas, bpa=37.42 degrees ! Estimated noise=2917.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.1461 Jy ! Component: 100 - total flux cleaned = 1.44067 Jy ! Component: 150 - total flux cleaned = 1.56819 Jy ! Component: 200 - total flux cleaned = 1.62761 Jy ! Total flux subtracted in 200 components = 1.62761 Jy ! Clean residual min=-0.027427 max=0.033837 Jy/beam ! Clean residual mean=-0.000240 rms=0.008942 Jy/beam ! Combined flux in latest and established models = 1.62761 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 1.62761 Jy ! Inverting map and beam ! Estimated beam: bmin=5.578 mas, bmaj=10.86 mas, bpa=35.82 degrees ! Estimated noise=2486.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29.5, 101.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.037955 Jy ! Component: 100 - total flux cleaned = 0.0624071 Jy ! Component: 150 - total flux cleaned = 0.0701042 Jy ! Component: 200 - total flux cleaned = 0.0773761 Jy ! Total flux subtracted in 200 components = 0.0773761 Jy ! Clean residual min=-0.012961 max=0.011973 Jy/beam ! Clean residual mean=-0.000068 rms=0.003594 Jy/beam ! Combined flux in latest and established models = 1.70499 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 51 components and 1.70499 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=11.5 mas, bpa=39.75 degrees ! Estimated noise=2664.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126808 Jy ! Component: 100 - total flux cleaned = 0.0152282 Jy ! Component: 150 - total flux cleaned = 0.0164277 Jy ! Component: 200 - total flux cleaned = 0.0174511 Jy ! Total flux subtracted in 200 components = 0.0174511 Jy ! Clean residual min=-0.008467 max=0.008574 Jy/beam ! Clean residual mean=-0.000028 rms=0.002639 Jy/beam ! Combined flux in latest and established models = 1.72244 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110814 Jy ! Component: 100 - total flux cleaned = 0.00168965 Jy ! Component: 150 - total flux cleaned = 0.00203301 Jy ! Component: 200 - total flux cleaned = 0.00266664 Jy ! Total flux subtracted in 200 components = 0.00266664 Jy ! Clean residual min=-0.006521 max=0.006824 Jy/beam ! Clean residual mean=-0.000013 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 1.7251 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 97 components and 1.7251 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.578 mas, bmaj=10.86 mas, bpa=35.82 degrees ! Estimated noise=2486.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524014 Jy ! Component: 100 - total flux cleaned = 0.000872816 Jy ! Component: 150 - total flux cleaned = 0.000873693 Jy ! Component: 200 - total flux cleaned = 0.00116391 Jy ! Total flux subtracted in 200 components = 0.00116391 Jy ! Clean residual min=-0.005633 max=0.006279 Jy/beam ! Clean residual mean=0.000006 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 1.72627 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 1.72627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071208Jy sigma=0.000606 ! Fit after self-cal, rms=0.071081Jy sigma=0.000604 wmodel J0136+4751_S_2017_09_26_pus_map.mod ! Writing 121 model components to file: J0136+4751_S_2017_09_26_pus_map.mod wobs J0136+4751_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0136+4751_S_2017_09_26_pus_uvs.fits wwins J0136+4751_S_2017_09_26_pus_map.win ! wwins: Wrote 3 windows to J0136+4751_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460659 Jy ! Component: 100 - total flux cleaned = 0.000862169 Jy ! Component: 150 - total flux cleaned = 0.00068506 Jy ! Component: 200 - total flux cleaned = 0.000507969 Jy ! Component: 250 - total flux cleaned = 0.000506042 Jy ! Component: 300 - total flux cleaned = 0.000503329 Jy ! Component: 350 - total flux cleaned = 0.000501903 Jy ! Component: 400 - total flux cleaned = 0.000368514 Jy ! Component: 450 - total flux cleaned = 0.000111908 Jy ! Component: 500 - total flux cleaned = -1.0169e-05 Jy ! Component: 550 - total flux cleaned = -6.78937e-05 Jy ! Component: 600 - total flux cleaned = -1.32453e-05 Jy ! Component: 650 - total flux cleaned = 0.00014772 Jy ! Component: 700 - total flux cleaned = 0.000354567 Jy ! Component: 750 - total flux cleaned = 0.000406327 Jy ! Component: 800 - total flux cleaned = 0.000647851 Jy ! Component: 850 - total flux cleaned = 0.000928306 Jy ! Component: 900 - total flux cleaned = 0.00119799 Jy ! Component: 950 - total flux cleaned = 0.00146054 Jy ! Component: 1000 - total flux cleaned = 0.00171556 Jy ! Component: 1050 - total flux cleaned = 0.00192158 Jy ! Component: 1100 - total flux cleaned = 0.00208215 Jy ! Component: 1150 - total flux cleaned = 0.00223926 Jy ! Component: 1200 - total flux cleaned = 0.00239252 Jy ! Component: 1250 - total flux cleaned = 0.00250446 Jy ! Component: 1300 - total flux cleaned = 0.00264898 Jy ! Component: 1350 - total flux cleaned = 0.00275602 Jy ! Component: 1400 - total flux cleaned = 0.0028958 Jy ! Component: 1450 - total flux cleaned = 0.00310138 Jy ! Component: 1500 - total flux cleaned = 0.00323564 Jy ! Component: 1550 - total flux cleaned = 0.00343298 Jy ! Component: 1600 - total flux cleaned = 0.00356218 Jy ! Component: 1650 - total flux cleaned = 0.00381656 Jy ! Component: 1700 - total flux cleaned = 0.00400407 Jy ! Component: 1750 - total flux cleaned = 0.00415771 Jy ! Component: 1800 - total flux cleaned = 0.00430925 Jy ! Component: 1850 - total flux cleaned = 0.00457687 Jy ! Component: 1900 - total flux cleaned = 0.00460604 Jy ! Component: 1950 - total flux cleaned = 0.00477914 Jy ! Component: 2000 - total flux cleaned = 0.00475071 Jy ! Component: 2050 - total flux cleaned = 0.00475068 Jy ! Component: 2100 - total flux cleaned = 0.00472282 Jy ! Component: 2150 - total flux cleaned = 0.00472294 Jy ! Component: 2200 - total flux cleaned = 0.00472279 Jy ! Component: 2250 - total flux cleaned = 0.00472238 Jy ! Component: 2300 - total flux cleaned = 0.00464247 Jy ! Component: 2350 - total flux cleaned = 0.00456356 Jy ! Component: 2400 - total flux cleaned = 0.00445959 Jy ! Component: 2450 - total flux cleaned = 0.00443393 Jy ! Component: 2500 - total flux cleaned = 0.00440833 Jy ! Component: 2550 - total flux cleaned = 0.004256 Jy ! Component: 2600 - total flux cleaned = 0.00412998 Jy ! Component: 2650 - total flux cleaned = 0.00402916 Jy ! Component: 2700 - total flux cleaned = 0.00387856 Jy ! Component: 2750 - total flux cleaned = 0.00372847 Jy ! Component: 2800 - total flux cleaned = 0.00355389 Jy ! Component: 2850 - total flux cleaned = 0.0034546 Jy ! Component: 2900 - total flux cleaned = 0.00330554 Jy ! Component: 2950 - total flux cleaned = 0.00323132 Jy ! Component: 3000 - total flux cleaned = 0.00303345 Jy ! Component: 3050 - total flux cleaned = 0.00293474 Jy ! Component: 3100 - total flux cleaned = 0.00281155 Jy ! Component: 3150 - total flux cleaned = 0.00268846 Jy ! Component: 3200 - total flux cleaned = 0.00259029 Jy ! Component: 3250 - total flux cleaned = 0.00246766 Jy ! Component: 3300 - total flux cleaned = 0.00229621 Jy ! Component: 3350 - total flux cleaned = 0.00217386 Jy ! Component: 3400 - total flux cleaned = 0.00202712 Jy ! Component: 3450 - total flux cleaned = 0.00180671 Jy ! Component: 3500 - total flux cleaned = 0.00168422 Jy ! Component: 3550 - total flux cleaned = 0.00151226 Jy ! Component: 3600 - total flux cleaned = 0.00134034 Jy ! Component: 3650 - total flux cleaned = 0.00114336 Jy ! Component: 3700 - total flux cleaned = 0.000970839 Jy ! Component: 3750 - total flux cleaned = 0.000798166 Jy ! Component: 3800 - total flux cleaned = 0.000625098 Jy ! Component: 3850 - total flux cleaned = 0.000451719 Jy ! Component: 3900 - total flux cleaned = 0.000302803 Jy ! Component: 3950 - total flux cleaned = 0.000228198 Jy ! Component: 4000 - total flux cleaned = 2.83481e-05 Jy ! Component: 4050 - total flux cleaned = -4.69044e-05 Jy ! Total flux subtracted in 4096 components = -0.000172896 Jy ! Clean residual min=-0.001489 max=0.001603 Jy/beam ! Clean residual mean=0.000008 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 1.7261 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 353 components and 1.7261 Jy ![Exited script file: muppet] wmap "J0136+4751_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.578 x 10.86 at 35.82 degrees (North through East) ! Clean map min=-0.012678 max=1.4874 Jy/beam ! Writing clean map to FITS file: J0136+4751_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.48738 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000438681 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0884807 0.0884807 0.176961 0.353923 0.707846 1.41569 2.83138 5.66277 11.3255 22.6511 45.3021 90.6043 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.487 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.578 x 10.86 at 35.82 degrees (North through East) ! Clean map min=-0.012678 max=1.4874 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0136+4751_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:53:38 2019