! Started logfile: J0136+4751_S_2017_06_10_pus_uvs.log on Mon May 6 14:41:53 2019 obs J0136+4751_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0136+4751_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.724444 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0136+4751_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.401336Jy sigma=0.003693 ! Fit after self-cal, rms=0.347968Jy sigma=0.003195 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.851 mas, bmaj=9.603 mas, bpa=-61.79 degrees ! Estimated noise=2862.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.816957 Jy ! Component: 100 - total flux cleaned = 1.08485 Jy ! Total flux subtracted in 100 components = 1.08485 Jy ! Clean residual min=-0.064849 max=0.122275 Jy/beam ! Clean residual mean=-0.000109 rms=0.021303 Jy/beam ! Combined flux in latest and established models = 1.08485 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.08485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270761Jy sigma=0.002473 ! Fit after self-cal, rms=0.270730Jy sigma=0.002472 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=10.01 mas, bpa=-62.97 degrees ! Estimated noise=2314.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170414 Jy ! Component: 100 - total flux cleaned = 0.251578 Jy ! Component: 150 - total flux cleaned = 0.295213 Jy ! Component: 200 - total flux cleaned = 0.320025 Jy ! Total flux subtracted in 200 components = 0.320025 Jy ! Clean residual min=-0.021569 max=0.036961 Jy/beam ! Clean residual mean=0.000208 rms=0.007319 Jy/beam ! Combined flux in latest and established models = 1.40488 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 46 components and 1.40488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131964Jy sigma=0.001322 ! Fit after self-cal, rms=0.130746Jy sigma=0.001313 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.01 KP 1.01 ! LA 1.00 MK 1.03 NL 0.90 OV 0.99 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.03 KP 0.96 ! LA 0.95 MK 1.00 NL 1.03 OV 1.25 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 0.99 KP 0.95 ! LA 0.96 MK 1.01 NL 0.97 OV 0.94 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.97 KP 1.00* ! LA 1.00 MK 0.98 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.130746Jy sigma=0.001313 ! Fit after self-cal, rms=0.081656Jy sigma=0.000749 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=9.996 mas, bpa=-63.03 degrees ! Estimated noise=2295.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196004 Jy ! Component: 100 - total flux cleaned = 0.0188493 Jy ! Component: 150 - total flux cleaned = 0.0181383 Jy ! Component: 200 - total flux cleaned = 0.0187209 Jy ! Total flux subtracted in 200 components = 0.0187209 Jy ! Clean residual min=-0.007897 max=0.017521 Jy/beam ! Clean residual mean=0.000006 rms=0.003122 Jy/beam ! Combined flux in latest and established models = 1.4236 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 1.4236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075356Jy sigma=0.000693 ! Fit after self-cal, rms=0.074982Jy sigma=0.000690 ! Inverting map ! Added new window around map position (1.5, 24.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141586 Jy ! Component: 100 - total flux cleaned = 0.0150359 Jy ! Component: 150 - total flux cleaned = 0.0141926 Jy ! Component: 200 - total flux cleaned = 0.0132473 Jy ! Total flux subtracted in 200 components = 0.0132473 Jy ! Clean residual min=-0.006495 max=0.008516 Jy/beam ! Clean residual mean=0.000049 rms=0.002065 Jy/beam ! Combined flux in latest and established models = 1.43684 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 101 components and 1.43684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071709Jy sigma=0.000661 ! Fit after self-cal, rms=0.071634Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071634Jy sigma=0.000661 ! Fit after self-cal, rms=0.070479Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=9.986 mas, bpa=-63.05 degrees ! Estimated noise=2287.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00636015 Jy ! Component: 100 - total flux cleaned = 0.00685691 Jy ! Component: 150 - total flux cleaned = 0.0069949 Jy ! Component: 200 - total flux cleaned = 0.00712177 Jy ! Total flux subtracted in 200 components = 0.00712177 Jy ! Clean residual min=-0.004579 max=0.006599 Jy/beam ! Clean residual mean=0.000036 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 1.44397 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 132 components and 1.44397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069668Jy sigma=0.000648 ! Fit after self-cal, rms=0.069642Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (114, -111). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544515 Jy ! Component: 100 - total flux cleaned = 0.00585602 Jy ! Component: 150 - total flux cleaned = 0.00584406 Jy ! Component: 200 - total flux cleaned = 0.00603245 Jy ! Total flux subtracted in 200 components = 0.00603245 Jy ! Clean residual min=-0.003993 max=0.004885 Jy/beam ! Clean residual mean=0.000009 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 1.45 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 167 components and 1.45 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069014Jy sigma=0.000642 ! Fit after self-cal, rms=0.069001Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069001Jy sigma=0.000642 ! Fit after self-cal, rms=0.068790Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=9.983 mas, bpa=-63.06 degrees ! Estimated noise=2286.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270338 Jy ! Component: 100 - total flux cleaned = 0.00363391 Jy ! Component: 150 - total flux cleaned = 0.00379756 Jy ! Component: 200 - total flux cleaned = 0.00401649 Jy ! Total flux subtracted in 200 components = 0.00401649 Jy ! Clean residual min=-0.003774 max=0.004179 Jy/beam ! Clean residual mean=-0.000004 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 1.45401 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 185 components and 1.45401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068563Jy sigma=0.000639 ! Fit after self-cal, rms=0.068560Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 61.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298862 Jy ! Component: 100 - total flux cleaned = 0.00414173 Jy ! Component: 150 - total flux cleaned = 0.00530313 Jy ! Component: 200 - total flux cleaned = 0.00605841 Jy ! Total flux subtracted in 200 components = 0.00605841 Jy ! Clean residual min=-0.003050 max=0.002938 Jy/beam ! Clean residual mean=0.000009 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 1.46007 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 205 components and 1.46007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068261Jy sigma=0.000637 ! Fit after self-cal, rms=0.068254Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068254Jy sigma=0.000636 ! Fit after self-cal, rms=0.068223Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.272 mas, bmaj=12.62 mas, bpa=-86.82 degrees ! Estimated noise=2736.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000601043 Jy ! Component: 100 - total flux cleaned = 0.00132971 Jy ! Component: 150 - total flux cleaned = 0.00202968 Jy ! Component: 200 - total flux cleaned = 0.00251482 Jy ! Total flux subtracted in 200 components = 0.00251482 Jy ! Clean residual min=-0.003425 max=0.002706 Jy/beam ! Clean residual mean=0.000015 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 1.46259 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 248 components and 1.46259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068160Jy sigma=0.000636 ! Fit after self-cal, rms=0.068159Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521684 Jy ! Component: 100 - total flux cleaned = 0.000953727 Jy ! Component: 150 - total flux cleaned = 0.00143443 Jy ! Component: 200 - total flux cleaned = 0.00185067 Jy ! Total flux subtracted in 200 components = 0.00185067 Jy ! Clean residual min=-0.003211 max=0.002443 Jy/beam ! Clean residual mean=0.000009 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 1.46444 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 272 components and 1.46444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068129Jy sigma=0.000636 ! Fit after self-cal, rms=0.068129Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=9.982 mas, bpa=-63.07 degrees ! Estimated noise=2285.71 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.562 x 9.982 at -63.07 degrees (North through East) ! Clean map min=-0.0060237 max=1.1153 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068129Jy sigma=0.000636 ! Fit after self-cal, rms=0.062375Jy sigma=0.000580 ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=9.981 mas, bpa=-63.06 degrees ! Estimated noise=2284.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122445 Jy ! Component: 100 - total flux cleaned = 0.00215715 Jy ! Component: 150 - total flux cleaned = 0.00257139 Jy ! Component: 200 - total flux cleaned = 0.00290274 Jy ! Total flux subtracted in 200 components = 0.00290274 Jy ! Clean residual min=-0.002952 max=0.002481 Jy/beam ! Clean residual mean=0.000000 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 1.46734 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 304 components and 1.46734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062273Jy sigma=0.000579 ! Fit after self-cal, rms=0.062270Jy sigma=0.000579 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425635 Jy ! Component: 100 - total flux cleaned = 0.000898371 Jy ! Component: 150 - total flux cleaned = 0.00130345 Jy ! Component: 200 - total flux cleaned = 0.00157327 Jy ! Total flux subtracted in 200 components = 0.00157327 Jy ! Clean residual min=-0.002974 max=0.002441 Jy/beam ! Clean residual mean=0.000000 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 1.46891 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 320 components and 1.46891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062215Jy sigma=0.000578 ! Fit after self-cal, rms=0.062214Jy sigma=0.000578 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062214Jy sigma=0.000578 ! Fit after self-cal, rms=0.062213Jy sigma=0.000578 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.851 mas, bmaj=9.586 mas, bpa=-61.86 degrees ! Estimated noise=2822.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.80547 Jy ! Component: 100 - total flux cleaned = 1.07031 Jy ! Component: 150 - total flux cleaned = 1.20616 Jy ! Component: 200 - total flux cleaned = 1.28476 Jy ! Total flux subtracted in 200 components = 1.28476 Jy ! Clean residual min=-0.022333 max=0.041004 Jy/beam ! Clean residual mean=-0.000103 rms=0.008582 Jy/beam ! Combined flux in latest and established models = 1.28476 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 1.28476 Jy ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=9.98 mas, bpa=-63.07 degrees ! Estimated noise=2284.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633628 Jy ! Component: 100 - total flux cleaned = 0.0984882 Jy ! Component: 150 - total flux cleaned = 0.120763 Jy ! Component: 200 - total flux cleaned = 0.136517 Jy ! Total flux subtracted in 200 components = 0.136517 Jy ! Clean residual min=-0.008723 max=0.010342 Jy/beam ! Clean residual mean=0.000001 rms=0.002813 Jy/beam ! Combined flux in latest and established models = 1.42128 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 74 components and 1.42128 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.269 mas, bmaj=12.62 mas, bpa=-86.8 degrees ! Estimated noise=2735.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156246 Jy ! Component: 100 - total flux cleaned = 0.0242006 Jy ! Component: 150 - total flux cleaned = 0.0289995 Jy ! Component: 200 - total flux cleaned = 0.0331503 Jy ! Total flux subtracted in 200 components = 0.0331503 Jy ! Clean residual min=-0.005822 max=0.005988 Jy/beam ! Clean residual mean=0.000037 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 1.45443 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322704 Jy ! Component: 100 - total flux cleaned = 0.00626121 Jy ! Component: 150 - total flux cleaned = 0.00859741 Jy ! Component: 200 - total flux cleaned = 0.0104271 Jy ! Total flux subtracted in 200 components = 0.0104271 Jy ! Clean residual min=-0.004783 max=0.004678 Jy/beam ! Clean residual mean=0.000056 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 1.46486 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 145 components and 1.46486 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=9.98 mas, bpa=-63.07 degrees ! Estimated noise=2284.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418726 Jy ! Component: 100 - total flux cleaned = 0.00108866 Jy ! Component: 150 - total flux cleaned = 0.00223948 Jy ! Component: 200 - total flux cleaned = 0.00325249 Jy ! Total flux subtracted in 200 components = 0.00325249 Jy ! Clean residual min=-0.003930 max=0.004049 Jy/beam ! Clean residual mean=0.000006 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 1.46811 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 175 components and 1.46811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062905Jy sigma=0.000584 ! Fit after self-cal, rms=0.062833Jy sigma=0.000584 wmodel J0136+4751_S_2017_06_10_pus_map.mod ! Writing 175 model components to file: J0136+4751_S_2017_06_10_pus_map.mod wobs J0136+4751_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0136+4751_S_2017_06_10_pus_uvs.fits wwins J0136+4751_S_2017_06_10_pus_map.win ! wwins: Wrote 5 windows to J0136+4751_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122863 Jy ! Component: 100 - total flux cleaned = -0.000428984 Jy ! Component: 150 - total flux cleaned = -0.000656019 Jy ! Component: 200 - total flux cleaned = -0.000709421 Jy ! Component: 250 - total flux cleaned = -0.000504449 Jy ! Component: 300 - total flux cleaned = -0.000259307 Jy ! Component: 350 - total flux cleaned = 2.30531e-05 Jy ! Component: 400 - total flux cleaned = 0.000157983 Jy ! Component: 450 - total flux cleaned = 0.000246426 Jy ! Component: 500 - total flux cleaned = 0.000288328 Jy ! Component: 550 - total flux cleaned = 0.000247801 Jy ! Component: 600 - total flux cleaned = 0.000526083 Jy ! Component: 650 - total flux cleaned = 0.000641755 Jy ! Component: 700 - total flux cleaned = 0.000793887 Jy ! Component: 750 - total flux cleaned = 0.00101637 Jy ! Component: 800 - total flux cleaned = 0.00101597 Jy ! Component: 850 - total flux cleaned = 0.00101668 Jy ! Component: 900 - total flux cleaned = 0.00112088 Jy ! Component: 950 - total flux cleaned = 0.00115445 Jy ! Component: 1000 - total flux cleaned = 0.00118725 Jy ! Component: 1050 - total flux cleaned = 0.0013831 Jy ! Component: 1100 - total flux cleaned = 0.00144675 Jy ! Component: 1150 - total flux cleaned = 0.00157211 Jy ! Component: 1200 - total flux cleaned = 0.00157174 Jy ! Component: 1250 - total flux cleaned = 0.00166287 Jy ! Component: 1300 - total flux cleaned = 0.00166291 Jy ! Component: 1350 - total flux cleaned = 0.00178085 Jy ! Component: 1400 - total flux cleaned = 0.00189647 Jy ! Component: 1450 - total flux cleaned = 0.00206754 Jy ! Component: 1500 - total flux cleaned = 0.00206792 Jy ! Component: 1550 - total flux cleaned = 0.00217942 Jy ! Component: 1600 - total flux cleaned = 0.00228885 Jy ! Component: 1650 - total flux cleaned = 0.00231595 Jy ! Component: 1700 - total flux cleaned = 0.00242245 Jy ! Component: 1750 - total flux cleaned = 0.00244899 Jy ! Component: 1800 - total flux cleaned = 0.00255279 Jy ! Component: 1850 - total flux cleaned = 0.00260391 Jy ! Component: 1900 - total flux cleaned = 0.00265475 Jy ! Component: 1950 - total flux cleaned = 0.00278056 Jy ! Component: 2000 - total flux cleaned = 0.00280563 Jy ! Component: 2050 - total flux cleaned = 0.00292861 Jy ! Component: 2100 - total flux cleaned = 0.00295311 Jy ! Component: 2150 - total flux cleaned = 0.00302563 Jy ! Component: 2200 - total flux cleaned = 0.00302567 Jy ! Component: 2250 - total flux cleaned = 0.00309676 Jy ! Component: 2300 - total flux cleaned = 0.00316722 Jy ! Component: 2350 - total flux cleaned = 0.00323699 Jy ! Component: 2400 - total flux cleaned = 0.00330627 Jy ! Component: 2450 - total flux cleaned = 0.00335212 Jy ! Component: 2500 - total flux cleaned = 0.00346593 Jy ! Component: 2550 - total flux cleaned = 0.00355619 Jy ! Component: 2600 - total flux cleaned = 0.00362346 Jy ! Component: 2650 - total flux cleaned = 0.00373467 Jy ! Component: 2700 - total flux cleaned = 0.00382293 Jy ! Component: 2750 - total flux cleaned = 0.00397625 Jy ! Component: 2800 - total flux cleaned = 0.00401964 Jy ! Component: 2850 - total flux cleaned = 0.00410637 Jy ! Component: 2900 - total flux cleaned = 0.004171 Jy ! Component: 2950 - total flux cleaned = 0.00432072 Jy ! Component: 3000 - total flux cleaned = 0.00442686 Jy ! Component: 3050 - total flux cleaned = 0.00451127 Jy ! Component: 3100 - total flux cleaned = 0.00457431 Jy ! Component: 3150 - total flux cleaned = 0.00463702 Jy ! Component: 3200 - total flux cleaned = 0.00472 Jy ! Component: 3250 - total flux cleaned = 0.00480275 Jy ! Component: 3300 - total flux cleaned = 0.00488506 Jy ! Component: 3350 - total flux cleaned = 0.00496708 Jy ! Component: 3400 - total flux cleaned = 0.00500781 Jy ! Component: 3450 - total flux cleaned = 0.00508888 Jy ! Component: 3500 - total flux cleaned = 0.00518972 Jy ! Component: 3550 - total flux cleaned = 0.00525016 Jy ! Component: 3600 - total flux cleaned = 0.00529022 Jy ! Component: 3650 - total flux cleaned = 0.00535015 Jy ! Component: 3700 - total flux cleaned = 0.00539 Jy ! Component: 3750 - total flux cleaned = 0.00540984 Jy ! Component: 3800 - total flux cleaned = 0.00544949 Jy ! Component: 3850 - total flux cleaned = 0.0054496 Jy ! Component: 3900 - total flux cleaned = 0.00548901 Jy ! Component: 3950 - total flux cleaned = 0.00546939 Jy ! Component: 4000 - total flux cleaned = 0.00542998 Jy ! Component: 4050 - total flux cleaned = 0.00550876 Jy ! Total flux subtracted in 4096 components = 0.00554811 Jy ! Clean residual min=-0.001113 max=0.001225 Jy/beam ! Clean residual mean=0.000006 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 1.47366 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 422 components and 1.47366 Jy ![Exited script file: muppet] wmap "J0136+4751_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.561 x 9.98 at -63.07 degrees (North through East) ! Clean map min=-0.0052839 max=1.1123 Jy/beam ! Writing clean map to FITS file: J0136+4751_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.11226 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000324243 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0874549 0.0874549 0.17491 0.349819 0.699639 1.39928 2.79856 5.59711 11.1942 22.3884 44.7769 89.5538 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.561 x 9.98 at -63.07 degrees (North through East) ! Clean map min=-0.0052839 max=1.1123 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0136+4751_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:41:59 2019