! Started logfile: J0134-093A_S_2017_07_16_pus_uvs.log on Thu May 9 10:57:23 2019 obs J0134-093A_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0134-093A_S_2017_07_16_pus_uva.fits ! AN table 1: 219 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.668899 visibilities/baseline/integration-bin. ! Found source: J0134-093A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 26368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0134-093A_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 443 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 428 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 426 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1734 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.965007Jy sigma=0.007908 ! Fit after self-cal, rms=0.932032Jy sigma=0.007662 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=6.432 mas, bpa=-4.767 degrees ! Estimated noise=1044.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507627 Jy ! Component: 100 - total flux cleaned = 0.0706154 Jy ! Total flux subtracted in 100 components = 0.0706154 Jy ! Clean residual min=-0.011824 max=0.012518 Jy/beam ! Clean residual mean=-0.000026 rms=0.003282 Jy/beam ! Combined flux in latest and established models = 0.0706154 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0706154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114722Jy sigma=0.000919 ! Fit after self-cal, rms=0.114196Jy sigma=0.000915 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=7.167 mas, bpa=-4.073 degrees ! Estimated noise=630.668 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024004 Jy ! Component: 100 - total flux cleaned = 0.0391553 Jy ! Component: 150 - total flux cleaned = 0.0488252 Jy ! Component: 200 - total flux cleaned = 0.0550172 Jy ! Total flux subtracted in 200 components = 0.0550172 Jy ! Clean residual min=-0.013936 max=0.015629 Jy/beam ! Clean residual mean=-0.000010 rms=0.004033 Jy/beam ! Combined flux in latest and established models = 0.125633 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 59 components and 0.125633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108994Jy sigma=0.000863 ! Fit after self-cal, rms=0.108624Jy sigma=0.000859 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.00* HN 1.23 KP 0.80 ! LA 0.97 MK 1.09 NL 1.43 OV 0.67 ! PT 1.06 SC 1.16 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.54 FD 1.00* HN 1.47 KP 0.96 ! LA 0.86 MK 0.96 NL 1.72 OV 0.81 ! PT 0.76 SC 1.43 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.12 KP 0.80 ! LA 1.14 MK 0.93 NL 1.43 OV 0.78 ! PT 0.76 SC 1.19 ! ! ! Correcting IF 4. ! A total of 456 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.108624Jy sigma=0.000859 ! Fit after self-cal, rms=0.124917Jy sigma=0.000829 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=7.621 mas, bpa=-4.543 degrees ! Estimated noise=654.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000806895 Jy ! Component: 100 - total flux cleaned = 0.000733115 Jy ! Component: 150 - total flux cleaned = 0.000732547 Jy ! Component: 200 - total flux cleaned = 0.000733405 Jy ! Total flux subtracted in 200 components = 0.000733405 Jy ! Clean residual min=-0.012502 max=0.013712 Jy/beam ! Clean residual mean=-0.000013 rms=0.003773 Jy/beam ! Combined flux in latest and established models = 0.126366 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.126366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124796Jy sigma=0.000828 ! Fit after self-cal, rms=0.126948Jy sigma=0.000823 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126948Jy sigma=0.000823 ! Fit after self-cal, rms=0.179840Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=7.99 mas, bpa=-6.163 degrees ! Estimated noise=713.977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663573 Jy ! Component: 100 - total flux cleaned = 0.00891671 Jy ! Component: 150 - total flux cleaned = 0.00917388 Jy ! Component: 200 - total flux cleaned = 0.00924467 Jy ! Total flux subtracted in 200 components = 0.00924467 Jy ! Clean residual min=-0.010415 max=0.012558 Jy/beam ! Clean residual mean=0.000000 rms=0.003000 Jy/beam ! Combined flux in latest and established models = 0.135611 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 0.135611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179259Jy sigma=0.000771 ! Fit after self-cal, rms=0.181243Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000562994 Jy ! Component: 100 - total flux cleaned = -0.000623803 Jy ! Component: 150 - total flux cleaned = -0.000729216 Jy ! Component: 200 - total flux cleaned = -0.000777356 Jy ! Total flux subtracted in 200 components = -0.000777356 Jy ! Clean residual min=-0.010416 max=0.011065 Jy/beam ! Clean residual mean=0.000002 rms=0.002945 Jy/beam ! Combined flux in latest and established models = 0.134833 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.134833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181183Jy sigma=0.000767 ! Fit after self-cal, rms=0.181150Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181150Jy sigma=0.000767 ! Fit after self-cal, rms=0.215412Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.915 mas, bmaj=8.23 mas, bpa=-7.349 degrees ! Estimated noise=706.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0007786 Jy ! Component: 100 - total flux cleaned = 0.000859042 Jy ! Component: 150 - total flux cleaned = 0.000992322 Jy ! Component: 200 - total flux cleaned = 0.000992997 Jy ! Total flux subtracted in 200 components = 0.000992997 Jy ! Clean residual min=-0.009981 max=0.010394 Jy/beam ! Clean residual mean=0.000004 rms=0.002711 Jy/beam ! Combined flux in latest and established models = 0.135826 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.135826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215268Jy sigma=0.000759 ! Fit after self-cal, rms=0.216006Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227037 Jy ! Component: 100 - total flux cleaned = -0.000283581 Jy ! Component: 150 - total flux cleaned = -0.000333703 Jy ! Component: 200 - total flux cleaned = -0.000379319 Jy ! Total flux subtracted in 200 components = -0.000379319 Jy ! Clean residual min=-0.010200 max=0.010445 Jy/beam ! Clean residual mean=0.000004 rms=0.002718 Jy/beam ! Combined flux in latest and established models = 0.135447 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 84 components and 0.135447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215951Jy sigma=0.000759 ! Fit after self-cal, rms=0.215922Jy sigma=0.000758 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215922Jy sigma=0.000758 ! Fit after self-cal, rms=0.228095Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.159 mas, bmaj=14.74 mas, bpa=-6.765 degrees ! Estimated noise=892.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131802 Jy ! Component: 100 - total flux cleaned = 0.00164038 Jy ! Component: 150 - total flux cleaned = 0.0019043 Jy ! Component: 200 - total flux cleaned = 0.00190783 Jy ! Total flux subtracted in 200 components = 0.00190783 Jy ! Clean residual min=-0.017459 max=0.018471 Jy/beam ! Clean residual mean=0.000016 rms=0.005444 Jy/beam ! Combined flux in latest and established models = 0.137355 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 85 components and 0.137355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227999Jy sigma=0.000759 ! Fit after self-cal, rms=0.227948Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378145 Jy ! Component: 100 - total flux cleaned = -0.000154014 Jy ! Component: 150 - total flux cleaned = -3.04787e-05 Jy ! Component: 200 - total flux cleaned = 2.4972e-05 Jy ! Total flux subtracted in 200 components = 2.4972e-05 Jy ! Clean residual min=-0.017578 max=0.018332 Jy/beam ! Clean residual mean=0.000015 rms=0.005451 Jy/beam ! Combined flux in latest and established models = 0.13738 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 86 components and 0.13738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227921Jy sigma=0.000760 ! Fit after self-cal, rms=0.227704Jy sigma=0.000759 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=8.439 mas, bpa=-8.271 degrees ! Estimated noise=694.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 8.439 at -8.271 degrees (North through East) ! Clean map min=-0.010044 max=0.074094 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=7.31 mas, bpa=-7.497 degrees ! Estimated noise=1068.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0556217 Jy ! Component: 100 - total flux cleaned = 0.0855158 Jy ! Component: 150 - total flux cleaned = 0.10401 Jy ! Component: 200 - total flux cleaned = 0.116208 Jy ! Total flux subtracted in 200 components = 0.116208 Jy ! Clean residual min=-0.010167 max=0.009454 Jy/beam ! Clean residual mean=-0.000008 rms=0.002362 Jy/beam ! Combined flux in latest and established models = 0.116209 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.116209 Jy ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=8.439 mas, bpa=-8.271 degrees ! Estimated noise=694.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107391 Jy ! Component: 100 - total flux cleaned = 0.0165108 Jy ! Component: 150 - total flux cleaned = 0.0179088 Jy ! Component: 200 - total flux cleaned = 0.0186416 Jy ! Total flux subtracted in 200 components = 0.0186416 Jy ! Clean residual min=-0.010080 max=0.010533 Jy/beam ! Clean residual mean=0.000003 rms=0.002648 Jy/beam ! Combined flux in latest and established models = 0.13485 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.13485 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.159 mas, bmaj=14.74 mas, bpa=-6.765 degrees ! Estimated noise=892.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011758 Jy ! Component: 100 - total flux cleaned = 0.00157953 Jy ! Component: 150 - total flux cleaned = 0.00179458 Jy ! Component: 200 - total flux cleaned = 0.00197642 Jy ! Total flux subtracted in 200 components = 0.00197642 Jy ! Clean residual min=-0.017835 max=0.018189 Jy/beam ! Clean residual mean=0.000014 rms=0.005435 Jy/beam ! Combined flux in latest and established models = 0.136827 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151413 Jy ! Component: 100 - total flux cleaned = 0.000217613 Jy ! Component: 150 - total flux cleaned = 0.000330766 Jy ! Component: 200 - total flux cleaned = 0.000379662 Jy ! Total flux subtracted in 200 components = 0.000379662 Jy ! Clean residual min=-0.017656 max=0.018213 Jy/beam ! Clean residual mean=0.000014 rms=0.005448 Jy/beam ! Combined flux in latest and established models = 0.137206 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.137206 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=8.439 mas, bpa=-8.271 degrees ! Estimated noise=694.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196517 Jy ! Component: 100 - total flux cleaned = -0.000699875 Jy ! Component: 150 - total flux cleaned = -0.000703575 Jy ! Component: 200 - total flux cleaned = -0.000843082 Jy ! Total flux subtracted in 200 components = -0.000843082 Jy ! Clean residual min=-0.010209 max=0.010124 Jy/beam ! Clean residual mean=0.000004 rms=0.002640 Jy/beam ! Combined flux in latest and established models = 0.136363 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.136363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227746Jy sigma=0.000758 ! Fit after self-cal, rms=0.227679Jy sigma=0.000757 wmodel J0134-093A_S_2017_07_16_pus_map.mod ! Writing 52 model components to file: J0134-093A_S_2017_07_16_pus_map.mod wobs J0134-093A_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0134-093A_S_2017_07_16_pus_uvs.fits wwins J0134-093A_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0134-093A_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020559 Jy ! Component: 100 - total flux cleaned = 0.0030727 Jy ! Component: 150 - total flux cleaned = 0.00291586 Jy ! Component: 200 - total flux cleaned = 0.00290946 Jy ! Component: 250 - total flux cleaned = 0.00290658 Jy ! Component: 300 - total flux cleaned = 0.00290669 Jy ! Component: 350 - total flux cleaned = 0.00290674 Jy ! Component: 400 - total flux cleaned = 0.0029036 Jy ! Component: 450 - total flux cleaned = 0.002902 Jy ! Component: 500 - total flux cleaned = 0.00313904 Jy ! Component: 550 - total flux cleaned = 0.00336811 Jy ! Component: 600 - total flux cleaned = 0.00348265 Jy ! Component: 650 - total flux cleaned = 0.00391758 Jy ! Component: 700 - total flux cleaned = 0.00391556 Jy ! Component: 750 - total flux cleaned = 0.00412325 Jy ! Component: 800 - total flux cleaned = 0.00422566 Jy ! Component: 850 - total flux cleaned = 0.00452404 Jy ! Component: 900 - total flux cleaned = 0.00481204 Jy ! Component: 950 - total flux cleaned = 0.00499887 Jy ! Component: 1000 - total flux cleaned = 0.00509047 Jy ! Component: 1050 - total flux cleaned = 0.00509134 Jy ! Component: 1100 - total flux cleaned = 0.00544635 Jy ! Component: 1150 - total flux cleaned = 0.00518354 Jy ! Component: 1200 - total flux cleaned = 0.00518581 Jy ! Component: 1250 - total flux cleaned = 0.00518601 Jy ! Component: 1300 - total flux cleaned = 0.00518427 Jy ! Component: 1350 - total flux cleaned = 0.0048589 Jy ! Component: 1400 - total flux cleaned = 0.00477863 Jy ! Component: 1450 - total flux cleaned = 0.00462164 Jy ! Component: 1500 - total flux cleaned = 0.00438917 Jy ! Component: 1550 - total flux cleaned = 0.00431289 Jy ! Component: 1600 - total flux cleaned = 0.0042358 Jy ! Component: 1650 - total flux cleaned = 0.00393699 Jy ! Component: 1700 - total flux cleaned = 0.00349499 Jy ! Component: 1750 - total flux cleaned = 0.00335064 Jy ! Component: 1800 - total flux cleaned = 0.00313496 Jy ! Component: 1850 - total flux cleaned = 0.00299167 Jy ! Component: 1900 - total flux cleaned = 0.00249964 Jy ! Component: 1950 - total flux cleaned = 0.00215283 Jy ! Component: 2000 - total flux cleaned = 0.00187936 Jy ! Component: 2050 - total flux cleaned = 0.00147311 Jy ! Component: 2100 - total flux cleaned = 0.00127185 Jy ! Component: 2150 - total flux cleaned = 0.000940169 Jy ! Component: 2200 - total flux cleaned = 0.000677242 Jy ! Component: 2250 - total flux cleaned = 0.000287848 Jy ! Component: 2300 - total flux cleaned = 0.00015877 Jy ! Component: 2350 - total flux cleaned = -9.57692e-05 Jy ! Component: 2400 - total flux cleaned = -0.000347779 Jy ! Component: 2450 - total flux cleaned = -0.000597217 Jy ! Component: 2500 - total flux cleaned = -0.000782624 Jy ! Component: 2550 - total flux cleaned = -0.00108777 Jy ! Component: 2600 - total flux cleaned = -0.00133007 Jy ! Component: 2650 - total flux cleaned = -0.00162946 Jy ! Component: 2700 - total flux cleaned = -0.00192586 Jy ! Component: 2750 - total flux cleaned = -0.00227896 Jy ! Component: 2800 - total flux cleaned = -0.00251227 Jy ! Component: 2850 - total flux cleaned = -0.00280111 Jy ! Component: 2900 - total flux cleaned = -0.00314486 Jy ! Component: 2950 - total flux cleaned = -0.0033156 Jy ! Component: 3000 - total flux cleaned = -0.00370982 Jy ! Component: 3050 - total flux cleaned = -0.00393335 Jy ! Component: 3100 - total flux cleaned = -0.00415523 Jy ! Component: 3150 - total flux cleaned = -0.00448554 Jy ! Component: 3200 - total flux cleaned = -0.00481293 Jy ! Component: 3250 - total flux cleaned = -0.00513807 Jy ! Component: 3300 - total flux cleaned = -0.00535364 Jy ! Component: 3350 - total flux cleaned = -0.00572762 Jy ! Component: 3400 - total flux cleaned = -0.00615179 Jy ! Component: 3450 - total flux cleaned = -0.00636249 Jy ! Component: 3500 - total flux cleaned = -0.00678062 Jy ! Component: 3550 - total flux cleaned = -0.00719635 Jy ! Component: 3600 - total flux cleaned = -0.00760864 Jy ! Component: 3650 - total flux cleaned = -0.0080184 Jy ! Component: 3700 - total flux cleaned = -0.00827256 Jy ! Component: 3750 - total flux cleaned = -0.00862662 Jy ! Component: 3800 - total flux cleaned = -0.00897823 Jy ! Component: 3850 - total flux cleaned = -0.0091779 Jy ! Component: 3900 - total flux cleaned = -0.00957534 Jy ! Component: 3950 - total flux cleaned = -0.00972359 Jy ! Component: 4000 - total flux cleaned = -0.00992015 Jy ! Component: 4050 - total flux cleaned = -0.0100667 Jy ! Total flux subtracted in 4096 components = -0.0102612 Jy ! Clean residual min=-0.002577 max=0.002773 Jy/beam ! Clean residual mean=0.000007 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.126102 Jy keep ! Adding 456 model components to the UV plane model. ! The established model now contains 508 components and 0.126102 Jy ![Exited script file: muppet] wmap "J0134-093A_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 8.439 at -8.271 degrees (North through East) ! Clean map min=-0.0053352 max=0.074112 Jy/beam ! Writing clean map to FITS file: J0134-093A_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0741119 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000917505 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.714 3.714 7.428 14.856 29.712 59.424 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 8.439 at -8.271 degrees (North through East) ! Clean map min=-0.0053352 max=0.074112 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0134-093A_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:57:28 2019