! Started logfile: J0134-093A_S_2017_06_15_pus_uvs.log on Tue May 7 15:08:02 2019 obs J0134-093A_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0134-093A_S_2017_06_15_pus_uva.fits ! AN table 1: 263 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.922518 visibilities/baseline/integration-bin. ! Found source: J0134-093A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 43672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0134-093A_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 353 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 353 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1776 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.957282Jy sigma=0.008120 ! Fit after self-cal, rms=0.924633Jy sigma=0.007840 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.591 mas, bmaj=6.905 mas, bpa=-5.432 degrees ! Estimated noise=914.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0549928 Jy ! Component: 100 - total flux cleaned = 0.0799391 Jy ! Total flux subtracted in 100 components = 0.0799391 Jy ! Clean residual min=-0.009828 max=0.017345 Jy/beam ! Clean residual mean=-0.000017 rms=0.003380 Jy/beam ! Combined flux in latest and established models = 0.0799391 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.0799391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127579Jy sigma=0.001116 ! Fit after self-cal, rms=0.127237Jy sigma=0.001113 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=8.047 mas, bpa=-4.279 degrees ! Estimated noise=486.629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336983 Jy ! Component: 100 - total flux cleaned = 0.0525996 Jy ! Component: 150 - total flux cleaned = 0.0633438 Jy ! Component: 200 - total flux cleaned = 0.0695883 Jy ! Total flux subtracted in 200 components = 0.0695883 Jy ! Clean residual min=-0.016898 max=0.023563 Jy/beam ! Clean residual mean=0.000021 rms=0.005639 Jy/beam ! Combined flux in latest and established models = 0.149527 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.149527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119547Jy sigma=0.001026 ! Fit after self-cal, rms=0.118936Jy sigma=0.001021 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.71 HN 1.68 KP 1.21 ! LA 1.00 MK 0.81 NL 1.99 OV 1.15 ! PT 0.70 SC 1.42 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.81 FD 0.78 HN 1.87 KP 1.35 ! LA 0.84 MK 0.74 NL 2.28 OV 1.30 ! PT 0.62 SC 1.49 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.98 FD 0.73 HN 1.59 KP 1.56 ! LA 0.84 MK 0.81 NL 2.30 OV 1.09 ! PT 0.64 SC 1.57 ! ! ! Correcting IF 4. ! A total of 354 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.64 HN 1.44 KP 1.00* ! LA 1.00* MK 0.48 NL 1.00* OV 1.00* ! PT 0.71 SC 1.00* ! ! ! Fit before self-cal, rms=0.118936Jy sigma=0.001021 ! Fit after self-cal, rms=0.173153Jy sigma=0.000933 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=8.874 mas, bpa=-8.339 degrees ! Estimated noise=513.799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119241 Jy ! Component: 100 - total flux cleaned = 0.00132329 Jy ! Component: 150 - total flux cleaned = 0.00126281 Jy ! Component: 200 - total flux cleaned = 0.00120841 Jy ! Total flux subtracted in 200 components = 0.00120841 Jy ! Clean residual min=-0.015579 max=0.013987 Jy/beam ! Clean residual mean=0.000005 rms=0.004271 Jy/beam ! Combined flux in latest and established models = 0.150736 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.150736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172988Jy sigma=0.000933 ! Fit after self-cal, rms=0.176536Jy sigma=0.000924 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176536Jy sigma=0.000924 ! Fit after self-cal, rms=0.221853Jy sigma=0.000888 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=9.167 mas, bpa=-9.676 degrees ! Estimated noise=512.216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347283 Jy ! Component: 100 - total flux cleaned = 0.00444887 Jy ! Component: 150 - total flux cleaned = 0.00455729 Jy ! Component: 200 - total flux cleaned = 0.00464561 Jy ! Total flux subtracted in 200 components = 0.00464561 Jy ! Clean residual min=-0.012868 max=0.012171 Jy/beam ! Clean residual mean=0.000005 rms=0.003578 Jy/beam ! Combined flux in latest and established models = 0.155381 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.155381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221640Jy sigma=0.000887 ! Fit after self-cal, rms=0.222661Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000376885 Jy ! Component: 100 - total flux cleaned = -0.000335644 Jy ! Component: 150 - total flux cleaned = -0.00037015 Jy ! Component: 200 - total flux cleaned = -0.000369244 Jy ! Total flux subtracted in 200 components = -0.000369244 Jy ! Clean residual min=-0.012659 max=0.012498 Jy/beam ! Clean residual mean=0.000004 rms=0.003599 Jy/beam ! Combined flux in latest and established models = 0.155012 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.155012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222603Jy sigma=0.000886 ! Fit after self-cal, rms=0.222599Jy sigma=0.000886 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222599Jy sigma=0.000886 ! Fit after self-cal, rms=0.236459Jy sigma=0.000883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=9.364 mas, bpa=-10.14 degrees ! Estimated noise=499.447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00042752 Jy ! Component: 100 - total flux cleaned = 0.000516474 Jy ! Component: 150 - total flux cleaned = 0.000553523 Jy ! Component: 200 - total flux cleaned = 0.000586599 Jy ! Total flux subtracted in 200 components = 0.000586599 Jy ! Clean residual min=-0.011734 max=0.012035 Jy/beam ! Clean residual mean=0.000005 rms=0.003450 Jy/beam ! Combined flux in latest and established models = 0.155599 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 0.155599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236372Jy sigma=0.000883 ! Fit after self-cal, rms=0.236488Jy sigma=0.000883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189748 Jy ! Component: 100 - total flux cleaned = -0.000117222 Jy ! Component: 150 - total flux cleaned = -8.49962e-05 Jy ! Component: 200 - total flux cleaned = -5.62793e-05 Jy ! Total flux subtracted in 200 components = -5.62793e-05 Jy ! Clean residual min=-0.011724 max=0.012081 Jy/beam ! Clean residual mean=0.000005 rms=0.003457 Jy/beam ! Combined flux in latest and established models = 0.155542 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 78 components and 0.155542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236437Jy sigma=0.000883 ! Fit after self-cal, rms=0.236436Jy sigma=0.000883 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236436Jy sigma=0.000883 ! Fit after self-cal, rms=0.240774Jy sigma=0.000883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.333 mas, bmaj=17.11 mas, bpa=-8.058 degrees ! Estimated noise=646.503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238015 Jy ! Component: 100 - total flux cleaned = 0.00237595 Jy ! Component: 150 - total flux cleaned = 0.0023721 Jy ! Component: 200 - total flux cleaned = 0.00235918 Jy ! Total flux subtracted in 200 components = 0.00235918 Jy ! Clean residual min=-0.022261 max=0.021612 Jy/beam ! Clean residual mean=0.000010 rms=0.006548 Jy/beam ! Combined flux in latest and established models = 0.157902 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 79 components and 0.157902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240688Jy sigma=0.000885 ! Fit after self-cal, rms=0.240623Jy sigma=0.000883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.80111e-05 Jy ! Component: 100 - total flux cleaned = -3.16911e-05 Jy ! Component: 150 - total flux cleaned = -2.82439e-05 Jy ! Component: 200 - total flux cleaned = -3.45445e-05 Jy ! Total flux subtracted in 200 components = -3.45445e-05 Jy ! Clean residual min=-0.022191 max=0.021662 Jy/beam ! Clean residual mean=0.000010 rms=0.006546 Jy/beam ! Combined flux in latest and established models = 0.157867 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 79 components and 0.157867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240594Jy sigma=0.000885 ! Fit after self-cal, rms=0.240530Jy sigma=0.000884 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=9.567 mas, bpa=-10.61 degrees ! Estimated noise=492.303 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.966 x 9.567 at -10.61 degrees (North through East) ! Clean map min=-0.01141 max=0.070874 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.432 mas, bmaj=8.186 mas, bpa=-11.07 degrees ! Estimated noise=920.486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568281 Jy ! Component: 100 - total flux cleaned = 0.0899169 Jy ! Component: 150 - total flux cleaned = 0.111206 Jy ! Component: 200 - total flux cleaned = 0.125444 Jy ! Total flux subtracted in 200 components = 0.125444 Jy ! Clean residual min=-0.009149 max=0.008679 Jy/beam ! Clean residual mean=0.000001 rms=0.002404 Jy/beam ! Combined flux in latest and established models = 0.125444 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.125444 Jy ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=9.567 mas, bpa=-10.61 degrees ! Estimated noise=492.303 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141703 Jy ! Component: 100 - total flux cleaned = 0.0218117 Jy ! Component: 150 - total flux cleaned = 0.0260586 Jy ! Component: 200 - total flux cleaned = 0.0284345 Jy ! Total flux subtracted in 200 components = 0.0284345 Jy ! Clean residual min=-0.011988 max=0.011430 Jy/beam ! Clean residual mean=0.000003 rms=0.003420 Jy/beam ! Combined flux in latest and established models = 0.153878 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 56 components and 0.153878 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.333 mas, bmaj=17.11 mas, bpa=-8.058 degrees ! Estimated noise=646.503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372513 Jy ! Component: 100 - total flux cleaned = 0.00407582 Jy ! Component: 150 - total flux cleaned = 0.00406102 Jy ! Component: 200 - total flux cleaned = 0.00400965 Jy ! Total flux subtracted in 200 components = 0.00400965 Jy ! Clean residual min=-0.022365 max=0.021596 Jy/beam ! Clean residual mean=0.000010 rms=0.006549 Jy/beam ! Combined flux in latest and established models = 0.157888 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.35482e-06 Jy ! Component: 100 - total flux cleaned = -1.76855e-06 Jy ! Component: 150 - total flux cleaned = -5.7762e-06 Jy ! Component: 200 - total flux cleaned = -1.33961e-05 Jy ! Total flux subtracted in 200 components = -1.33961e-05 Jy ! Clean residual min=-0.022307 max=0.021612 Jy/beam ! Clean residual mean=0.000010 rms=0.006546 Jy/beam ! Combined flux in latest and established models = 0.157875 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 58 components and 0.157875 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=9.567 mas, bpa=-10.61 degrees ! Estimated noise=492.303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00217962 Jy ! Component: 100 - total flux cleaned = -0.00207324 Jy ! Component: 150 - total flux cleaned = -0.00200705 Jy ! Component: 200 - total flux cleaned = -0.00191351 Jy ! Total flux subtracted in 200 components = -0.00191351 Jy ! Clean residual min=-0.011772 max=0.011631 Jy/beam ! Clean residual mean=0.000004 rms=0.003409 Jy/beam ! Combined flux in latest and established models = 0.155961 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.155961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240559Jy sigma=0.000884 ! Fit after self-cal, rms=0.240606Jy sigma=0.000883 wmodel J0134-093A_S_2017_06_15_pus_map.mod ! Writing 71 model components to file: J0134-093A_S_2017_06_15_pus_map.mod wobs J0134-093A_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0134-093A_S_2017_06_15_pus_uvs.fits wwins J0134-093A_S_2017_06_15_pus_map.win ! wwins: Wrote 1 windows to J0134-093A_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230633 Jy ! Component: 100 - total flux cleaned = -0.000232046 Jy ! Component: 150 - total flux cleaned = 0.000702431 Jy ! Component: 200 - total flux cleaned = 0.00160183 Jy ! Component: 250 - total flux cleaned = 0.00212966 Jy ! Component: 300 - total flux cleaned = 0.00298493 Jy ! Component: 350 - total flux cleaned = 0.00415239 Jy ! Component: 400 - total flux cleaned = 0.00512929 Jy ! Component: 450 - total flux cleaned = 0.00592219 Jy ! Component: 500 - total flux cleaned = 0.00638941 Jy ! Component: 550 - total flux cleaned = 0.0073044 Jy ! Component: 600 - total flux cleaned = 0.00760172 Jy ! Component: 650 - total flux cleaned = 0.00818792 Jy ! Component: 700 - total flux cleaned = 0.00876416 Jy ! Component: 750 - total flux cleaned = 0.00947314 Jy ! Component: 800 - total flux cleaned = 0.0104501 Jy ! Component: 850 - total flux cleaned = 0.0109994 Jy ! Component: 900 - total flux cleaned = 0.0112718 Jy ! Component: 950 - total flux cleaned = 0.0116709 Jy ! Component: 1000 - total flux cleaned = 0.0119325 Jy ! Component: 1050 - total flux cleaned = 0.0120637 Jy ! Component: 1100 - total flux cleaned = 0.012576 Jy ! Component: 1150 - total flux cleaned = 0.0125759 Jy ! Component: 1200 - total flux cleaned = 0.0130756 Jy ! Component: 1250 - total flux cleaned = 0.0134432 Jy ! Component: 1300 - total flux cleaned = 0.0135648 Jy ! Component: 1350 - total flux cleaned = 0.0141677 Jy ! Component: 1400 - total flux cleaned = 0.0144077 Jy ! Component: 1450 - total flux cleaned = 0.015116 Jy ! Component: 1500 - total flux cleaned = 0.015467 Jy ! Component: 1550 - total flux cleaned = 0.0159282 Jy ! Component: 1600 - total flux cleaned = 0.016613 Jy ! Component: 1650 - total flux cleaned = 0.0171771 Jy ! Component: 1700 - total flux cleaned = 0.0177341 Jy ! Component: 1750 - total flux cleaned = 0.0180648 Jy ! Component: 1800 - total flux cleaned = 0.0183919 Jy ! Component: 1850 - total flux cleaned = 0.0189352 Jy ! Component: 1900 - total flux cleaned = 0.0194717 Jy ! Component: 1950 - total flux cleaned = 0.0196846 Jy ! Component: 2000 - total flux cleaned = 0.0204219 Jy ! Component: 2050 - total flux cleaned = 0.0208384 Jy ! Component: 2100 - total flux cleaned = 0.0207356 Jy ! Component: 2150 - total flux cleaned = 0.0215566 Jy ! Component: 2200 - total flux cleaned = 0.0219631 Jy ! Component: 2250 - total flux cleaned = 0.0220653 Jy ! Component: 2300 - total flux cleaned = 0.0228638 Jy ! Component: 2350 - total flux cleaned = 0.0232597 Jy ! Component: 2400 - total flux cleaned = 0.0235523 Jy ! Component: 2450 - total flux cleaned = 0.0237461 Jy ! Component: 2500 - total flux cleaned = 0.0237464 Jy ! Component: 2550 - total flux cleaned = 0.024225 Jy ! Component: 2600 - total flux cleaned = 0.0246049 Jy ! Component: 2650 - total flux cleaned = 0.0247937 Jy ! Component: 2700 - total flux cleaned = 0.0248885 Jy ! Component: 2750 - total flux cleaned = 0.0254447 Jy ! Component: 2800 - total flux cleaned = 0.025904 Jy ! Component: 2850 - total flux cleaned = 0.0257212 Jy ! Component: 2900 - total flux cleaned = 0.0260835 Jy ! Component: 2950 - total flux cleaned = 0.0261723 Jy ! Component: 3000 - total flux cleaned = 0.0262619 Jy ! Component: 3050 - total flux cleaned = 0.0265282 Jy ! Component: 3100 - total flux cleaned = 0.0267047 Jy ! Component: 3150 - total flux cleaned = 0.0269661 Jy ! Component: 3200 - total flux cleaned = 0.0270518 Jy ! Component: 3250 - total flux cleaned = 0.0269661 Jy ! Component: 3300 - total flux cleaned = 0.0273933 Jy ! Component: 3350 - total flux cleaned = 0.0272241 Jy ! Component: 3400 - total flux cleaned = 0.027729 Jy ! Component: 3450 - total flux cleaned = 0.0278117 Jy ! Component: 3500 - total flux cleaned = 0.0278944 Jy ! Component: 3550 - total flux cleaned = 0.0279761 Jy ! Component: 3600 - total flux cleaned = 0.0278938 Jy ! Component: 3650 - total flux cleaned = 0.0279751 Jy ! Component: 3700 - total flux cleaned = 0.0278947 Jy ! Component: 3750 - total flux cleaned = 0.027734 Jy ! Component: 3800 - total flux cleaned = 0.0274152 Jy ! Component: 3850 - total flux cleaned = 0.0274153 Jy ! Component: 3900 - total flux cleaned = 0.0274154 Jy ! Component: 3950 - total flux cleaned = 0.0270248 Jy ! Component: 4000 - total flux cleaned = 0.0270248 Jy ! Component: 4050 - total flux cleaned = 0.026947 Jy ! Total flux subtracted in 4096 components = 0.0265623 Jy ! Clean residual min=-0.004277 max=0.004468 Jy/beam ! Clean residual mean=-0.000001 rms=0.001679 Jy/beam ! Combined flux in latest and established models = 0.182523 Jy keep ! Adding 571 model components to the UV plane model. ! The established model now contains 642 components and 0.182524 Jy ![Exited script file: muppet] wmap "J0134-093A_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.966 x 9.567 at -10.61 degrees (North through East) ! Clean map min=-0.011828 max=0.069132 Jy/beam ! Writing clean map to FITS file: J0134-093A_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0691325 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00167027 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.24813 7.24813 14.4963 28.9925 57.985 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.966 x 9.567 at -10.61 degrees (North through East) ! Clean map min=-0.011828 max=0.069132 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0134-093A_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:08:08 2019