! Started logfile: J0133-4430_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:01:29 2019 obs J0133-4430_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0133-4430_S_2017_01_16_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.456322 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0133-4430 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 4764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0133-4430_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 179 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 179 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 179 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.884852Jy sigma=0.003846 ! Fit after self-cal, rms=0.812433Jy sigma=0.003572 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=22.21 mas, bpa=1.205 degrees ! Estimated noise=4664.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172447 Jy ! Component: 100 - total flux cleaned = 0.232408 Jy ! Total flux subtracted in 100 components = 0.232408 Jy ! Clean residual min=-0.024542 max=0.038751 Jy/beam ! Clean residual mean=0.001496 rms=0.009817 Jy/beam ! Combined flux in latest and established models = 0.232408 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.232408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192845Jy sigma=0.000760 ! Fit after self-cal, rms=0.190995Jy sigma=0.000758 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=24 mas, bpa=1.262 degrees ! Estimated noise=2394.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514045 Jy ! Component: 100 - total flux cleaned = 0.0810446 Jy ! Component: 150 - total flux cleaned = 0.0985412 Jy ! Component: 200 - total flux cleaned = 0.109201 Jy ! Total flux subtracted in 200 components = 0.109201 Jy ! Clean residual min=-0.014456 max=0.015459 Jy/beam ! Clean residual mean=0.000252 rms=0.004703 Jy/beam ! Combined flux in latest and established models = 0.341609 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 89 components and 0.341609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180750Jy sigma=0.000659 ! Fit after self-cal, rms=0.178283Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.23 KP 0.90 ! LA 1.01 MK 1.00* NL 1.10 OV 1.00* ! PT 0.91 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.46 KP 0.87 ! LA 0.97 MK 1.00* NL 1.27 OV 1.00* ! PT 0.90 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.16 KP 0.96 ! LA 1.00 MK 1.00* NL 1.09 OV 1.00* ! PT 0.91 SC 1.12 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.74 KP 0.96 ! LA 1.01 MK 1.00* NL 1.00* OV 1.00* ! PT 0.90 SC 0.92 ! ! ! Fit before self-cal, rms=0.178283Jy sigma=0.000657 ! Fit after self-cal, rms=0.190728Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=24.84 mas, bpa=1.234 degrees ! Estimated noise=2408.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108319 Jy ! Component: 100 - total flux cleaned = -0.00132427 Jy ! Component: 150 - total flux cleaned = -0.00140257 Jy ! Component: 200 - total flux cleaned = -0.00143747 Jy ! Total flux subtracted in 200 components = -0.00143747 Jy ! Clean residual min=-0.005529 max=0.005919 Jy/beam ! Clean residual mean=0.000125 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.340172 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 0.340172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190700Jy sigma=0.000641 ! Fit after self-cal, rms=0.192095Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192095Jy sigma=0.000641 ! Fit after self-cal, rms=0.195031Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=24.95 mas, bpa=1.253 degrees ! Estimated noise=2418.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118125 Jy ! Component: 100 - total flux cleaned = -0.00158849 Jy ! Component: 150 - total flux cleaned = -0.00184927 Jy ! Component: 200 - total flux cleaned = -0.00202393 Jy ! Total flux subtracted in 200 components = -0.00202393 Jy ! Clean residual min=-0.004997 max=0.005939 Jy/beam ! Clean residual mean=0.000140 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.338148 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 117 components and 0.338148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194983Jy sigma=0.000641 ! Fit after self-cal, rms=0.195354Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044513 Jy ! Component: 100 - total flux cleaned = -0.000543277 Jy ! Component: 150 - total flux cleaned = -0.000543607 Jy ! Component: 200 - total flux cleaned = -0.000543321 Jy ! Total flux subtracted in 200 components = -0.000543321 Jy ! Clean residual min=-0.004981 max=0.005870 Jy/beam ! Clean residual mean=0.000150 rms=0.001584 Jy/beam ! Combined flux in latest and established models = 0.337604 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 127 components and 0.337604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195336Jy sigma=0.000641 ! Fit after self-cal, rms=0.195425Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195425Jy sigma=0.000641 ! Fit after self-cal, rms=0.200303Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.828 mas, bmaj=25.13 mas, bpa=1.314 degrees ! Estimated noise=2436.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000757857 Jy ! Component: 100 - total flux cleaned = -0.00105605 Jy ! Component: 150 - total flux cleaned = -0.00132898 Jy ! Component: 200 - total flux cleaned = -0.00151514 Jy ! Total flux subtracted in 200 components = -0.00151514 Jy ! Clean residual min=-0.004795 max=0.005673 Jy/beam ! Clean residual mean=0.000136 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.336089 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 0.336089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200270Jy sigma=0.000640 ! Fit after self-cal, rms=0.200664Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000377667 Jy ! Component: 100 - total flux cleaned = -0.000462248 Jy ! Component: 150 - total flux cleaned = -0.000487436 Jy ! Component: 200 - total flux cleaned = -0.000487036 Jy ! Total flux subtracted in 200 components = -0.000487036 Jy ! Clean residual min=-0.004850 max=0.005706 Jy/beam ! Clean residual mean=0.000145 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.335602 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 138 components and 0.335602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200651Jy sigma=0.000640 ! Fit after self-cal, rms=0.200718Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200718Jy sigma=0.000640 ! Fit after self-cal, rms=0.205313Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.266 mas, bmaj=32.32 mas, bpa=-4.313 degrees ! Estimated noise=2754.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406145 Jy ! Component: 100 - total flux cleaned = 0.000364532 Jy ! Component: 150 - total flux cleaned = 0.000289726 Jy ! Component: 200 - total flux cleaned = 0.000290373 Jy ! Total flux subtracted in 200 components = 0.000290373 Jy ! Clean residual min=-0.005581 max=0.005018 Jy/beam ! Clean residual mean=0.000183 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.335892 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 148 components and 0.335892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205315Jy sigma=0.000641 ! Fit after self-cal, rms=0.205438Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222883 Jy ! Component: 100 - total flux cleaned = 0.000186372 Jy ! Component: 150 - total flux cleaned = 0.000188624 Jy ! Component: 200 - total flux cleaned = 0.000187722 Jy ! Total flux subtracted in 200 components = 0.000187722 Jy ! Clean residual min=-0.005540 max=0.004864 Jy/beam ! Clean residual mean=0.000179 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.33608 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 151 components and 0.33608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205435Jy sigma=0.000641 ! Fit after self-cal, rms=0.205461Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=25.3 mas, bpa=1.367 degrees ! Estimated noise=2451.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.835 x 25.3 at 1.367 degrees (North through East) ! Clean map min=-0.0048912 max=0.22772 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=22.93 mas, bpa=1.366 degrees ! Estimated noise=4798.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175032 Jy ! Component: 100 - total flux cleaned = 0.233352 Jy ! Component: 150 - total flux cleaned = 0.263767 Jy ! Component: 200 - total flux cleaned = 0.284227 Jy ! Total flux subtracted in 200 components = 0.284227 Jy ! Clean residual min=-0.016380 max=0.018835 Jy/beam ! Clean residual mean=0.000725 rms=0.005048 Jy/beam ! Combined flux in latest and established models = 0.284227 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.284227 Jy ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=25.3 mas, bpa=1.367 degrees ! Estimated noise=2451.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220428 Jy ! Component: 100 - total flux cleaned = 0.034096 Jy ! Component: 150 - total flux cleaned = 0.0410642 Jy ! Component: 200 - total flux cleaned = 0.0451905 Jy ! Total flux subtracted in 200 components = 0.0451905 Jy ! Clean residual min=-0.005933 max=0.006758 Jy/beam ! Clean residual mean=0.000226 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.329418 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 88 components and 0.329418 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.266 mas, bmaj=32.32 mas, bpa=-4.313 degrees ! Estimated noise=2754.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435222 Jy ! Component: 100 - total flux cleaned = 0.00601345 Jy ! Component: 150 - total flux cleaned = 0.00616358 Jy ! Component: 200 - total flux cleaned = 0.00630198 Jy ! Total flux subtracted in 200 components = 0.00630198 Jy ! Clean residual min=-0.005781 max=0.004571 Jy/beam ! Clean residual mean=0.000193 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.33572 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168017 Jy ! Component: 100 - total flux cleaned = 0.000282592 Jy ! Component: 150 - total flux cleaned = 0.000354917 Jy ! Component: 200 - total flux cleaned = 0.000389883 Jy ! Total flux subtracted in 200 components = 0.000389883 Jy ! Clean residual min=-0.005711 max=0.004419 Jy/beam ! Clean residual mean=0.000181 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.33611 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 95 components and 0.33611 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=25.3 mas, bpa=1.367 degrees ! Estimated noise=2451.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101333 Jy ! Component: 100 - total flux cleaned = -0.00131402 Jy ! Component: 150 - total flux cleaned = -0.0014082 Jy ! Component: 200 - total flux cleaned = -0.00145207 Jy ! Total flux subtracted in 200 components = -0.00145207 Jy ! Clean residual min=-0.005154 max=0.005615 Jy/beam ! Clean residual mean=0.000132 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.334658 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 0.334658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205453Jy sigma=0.000640 ! Fit after self-cal, rms=0.205655Jy sigma=0.000640 wmodel J0133-4430_S_2017_01_16_pus_map.mod ! Writing 107 model components to file: J0133-4430_S_2017_01_16_pus_map.mod wobs J0133-4430_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0133-4430_S_2017_01_16_pus_uvs.fits wwins J0133-4430_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0133-4430_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132186 Jy ! Component: 100 - total flux cleaned = 0.00250515 Jy ! Component: 150 - total flux cleaned = 0.00319998 Jy ! Component: 200 - total flux cleaned = 0.00383501 Jy ! Component: 250 - total flux cleaned = 0.00429125 Jy ! Component: 300 - total flux cleaned = 0.00453398 Jy ! Component: 350 - total flux cleaned = 0.0047628 Jy ! Component: 400 - total flux cleaned = 0.00498019 Jy ! Component: 450 - total flux cleaned = 0.00523959 Jy ! Component: 500 - total flux cleaned = 0.00543698 Jy ! Component: 550 - total flux cleaned = 0.00548403 Jy ! Component: 600 - total flux cleaned = 0.00543922 Jy ! Component: 650 - total flux cleaned = 0.00548332 Jy ! Component: 700 - total flux cleaned = 0.00523115 Jy ! Component: 750 - total flux cleaned = 0.00502776 Jy ! Component: 800 - total flux cleaned = 0.0047506 Jy ! Component: 850 - total flux cleaned = 0.00451958 Jy ! Component: 900 - total flux cleaned = 0.00433233 Jy ! Component: 950 - total flux cleaned = 0.00404135 Jy ! Component: 1000 - total flux cleaned = 0.00386461 Jy ! Component: 1050 - total flux cleaned = 0.00358874 Jy ! Component: 1100 - total flux cleaned = 0.00335406 Jy ! Component: 1150 - total flux cleaned = 0.00312503 Jy ! Component: 1200 - total flux cleaned = 0.0029654 Jy ! Component: 1250 - total flux cleaned = 0.0027462 Jy ! Component: 1300 - total flux cleaned = 0.00256254 Jy ! Component: 1350 - total flux cleaned = 0.00232209 Jy ! Component: 1400 - total flux cleaned = 0.00208637 Jy ! Component: 1450 - total flux cleaned = 0.00185466 Jy ! Component: 1500 - total flux cleaned = 0.00162748 Jy ! Component: 1550 - total flux cleaned = 0.00132085 Jy ! Component: 1600 - total flux cleaned = 0.00110195 Jy ! Component: 1650 - total flux cleaned = 0.000805751 Jy ! Component: 1700 - total flux cleaned = 0.000594124 Jy ! Component: 1750 - total flux cleaned = 0.000359497 Jy ! Component: 1800 - total flux cleaned = 0.000102417 Jy ! Component: 1850 - total flux cleaned = -0.00022682 Jy ! Component: 1900 - total flux cleaned = -0.000477144 Jy ! Component: 1950 - total flux cleaned = -0.000774453 Jy ! Component: 2000 - total flux cleaned = -0.00106885 Jy ! Component: 2050 - total flux cleaned = -0.00128807 Jy ! Component: 2100 - total flux cleaned = -0.00160222 Jy ! Component: 2150 - total flux cleaned = -0.00191409 Jy ! Component: 2200 - total flux cleaned = -0.0022236 Jy ! Component: 2250 - total flux cleaned = -0.00248356 Jy ! Component: 2300 - total flux cleaned = -0.00283561 Jy ! Component: 2350 - total flux cleaned = -0.00311529 Jy ! Component: 2400 - total flux cleaned = -0.00343921 Jy ! Component: 2450 - total flux cleaned = -0.00366897 Jy ! Component: 2500 - total flux cleaned = -0.0039429 Jy ! Component: 2550 - total flux cleaned = -0.00423779 Jy ! Component: 2600 - total flux cleaned = -0.00448587 Jy ! Component: 2650 - total flux cleaned = -0.00470999 Jy ! Component: 2700 - total flux cleaned = -0.00499988 Jy ! Component: 2750 - total flux cleaned = -0.0052881 Jy ! Component: 2800 - total flux cleaned = -0.00555272 Jy ! Component: 2850 - total flux cleaned = -0.00579416 Jy ! Component: 2900 - total flux cleaned = -0.00599079 Jy ! Component: 2950 - total flux cleaned = -0.00618681 Jy ! Component: 3000 - total flux cleaned = -0.00644689 Jy ! Component: 3050 - total flux cleaned = -0.00668445 Jy ! Component: 3100 - total flux cleaned = -0.00694318 Jy ! Component: 3150 - total flux cleaned = -0.00715836 Jy ! Component: 3200 - total flux cleaned = -0.00735188 Jy ! Component: 3250 - total flux cleaned = -0.00758802 Jy ! Component: 3300 - total flux cleaned = -0.00780268 Jy ! Component: 3350 - total flux cleaned = -0.00797422 Jy ! Component: 3400 - total flux cleaned = -0.00818889 Jy ! Component: 3450 - total flux cleaned = -0.00836064 Jy ! Component: 3500 - total flux cleaned = -0.00851099 Jy ! Component: 3550 - total flux cleaned = -0.00870444 Jy ! Component: 3600 - total flux cleaned = -0.008769 Jy ! Component: 3650 - total flux cleaned = -0.00887688 Jy ! Component: 3700 - total flux cleaned = -0.00896306 Jy ! Component: 3750 - total flux cleaned = -0.00904943 Jy ! Component: 3800 - total flux cleaned = -0.00915753 Jy ! Component: 3850 - total flux cleaned = -0.00920074 Jy ! Component: 3900 - total flux cleaned = -0.00928749 Jy ! Component: 3950 - total flux cleaned = -0.00937441 Jy ! Component: 4000 - total flux cleaned = -0.00948334 Jy ! Component: 4050 - total flux cleaned = -0.00950511 Jy ! Total flux subtracted in 4096 components = -0.0095707 Jy ! Clean residual min=-0.001268 max=0.001143 Jy/beam ! Clean residual mean=0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.325087 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 365 components and 0.325087 Jy ![Exited script file: muppet] wmap "J0133-4430_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.835 x 25.3 at 1.367 degrees (North through East) ! Clean map min=-0.0034125 max=0.22829 Jy/beam ! Writing clean map to FITS file: J0133-4430_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.228288 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000430427 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.565637 0.565637 1.13127 2.26255 4.5251 9.0502 18.1004 36.2008 72.4016 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.228 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.835 x 25.3 at 1.367 degrees (North through East) ! Clean map min=-0.0034125 max=0.22829 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0133-4430_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:01:35 2019