! Started logfile: J0128-1722_S_2017_10_21_pus_uvs.log on Sat May 11 20:48:16 2019 obs J0128-1722_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0128-1722_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.671935 visibilities/baseline/integration-bin. ! Found source: J0128-1722 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 11224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0128-1722_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 207 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 600 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971843Jy sigma=0.008743 ! Fit after self-cal, rms=0.939022Jy sigma=0.008459 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.585 mas, bmaj=17.85 mas, bpa=-18.19 degrees ! Estimated noise=1461.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446983 Jy ! Component: 100 - total flux cleaned = 0.0564075 Jy ! Total flux subtracted in 100 components = 0.0564075 Jy ! Clean residual min=-0.005693 max=0.008529 Jy/beam ! Clean residual mean=-0.000008 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.0564075 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0564075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091588Jy sigma=0.000745 ! Fit after self-cal, rms=0.091001Jy sigma=0.000740 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=19.86 mas, bpa=-17.03 degrees ! Estimated noise=849.646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134051 Jy ! Component: 100 - total flux cleaned = 0.0209211 Jy ! Component: 150 - total flux cleaned = 0.0257971 Jy ! Component: 200 - total flux cleaned = 0.0291734 Jy ! Total flux subtracted in 200 components = 0.0291734 Jy ! Clean residual min=-0.005218 max=0.009890 Jy/beam ! Clean residual mean=-0.000026 rms=0.001893 Jy/beam ! Combined flux in latest and established models = 0.0855809 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 80 components and 0.0855809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088897Jy sigma=0.000720 ! Fit after self-cal, rms=0.088724Jy sigma=0.000718 ! Inverting map ! Added new window around map position (10.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933763 Jy ! Component: 100 - total flux cleaned = 0.0142596 Jy ! Component: 150 - total flux cleaned = 0.0177919 Jy ! Component: 200 - total flux cleaned = 0.0206 Jy ! Total flux subtracted in 200 components = 0.0206 Jy ! Clean residual min=-0.003772 max=0.004132 Jy/beam ! Clean residual mean=-0.000014 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.106181 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 135 components and 0.106181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087604Jy sigma=0.000708 ! Fit after self-cal, rms=0.087404Jy sigma=0.000706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.94 KP 1.11 ! LA 1.05 MK 0.99 NL 0.99 OV 1.10 ! PT 0.91 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.01 KP 1.09 ! LA 0.96 MK 1.05 NL 1.09 OV 1.04 ! PT 0.90 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.96 KP 1.04 ! LA 0.80 MK 1.05 NL 1.26 OV 1.04 ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 159 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.81 KP 1.00* ! LA 1.08 MK 0.88 NL 1.00* OV 1.00* ! PT 0.75 ! ! ! Fit before self-cal, rms=0.087404Jy sigma=0.000706 ! Fit after self-cal, rms=0.085762Jy sigma=0.000701 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=19.94 mas, bpa=-16.95 degrees ! Estimated noise=863.162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225597 Jy ! Component: 100 - total flux cleaned = 0.00248943 Jy ! Component: 150 - total flux cleaned = 0.00238384 Jy ! Component: 200 - total flux cleaned = 0.00219127 Jy ! Total flux subtracted in 200 components = 0.00219127 Jy ! Clean residual min=-0.002511 max=0.003395 Jy/beam ! Clean residual mean=0.000005 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.108372 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 171 components and 0.108372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085602Jy sigma=0.000700 ! Fit after self-cal, rms=0.085736Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085736Jy sigma=0.000699 ! Fit after self-cal, rms=0.086331Jy sigma=0.000698 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=19.8 mas, bpa=-17.11 degrees ! Estimated noise=863.065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000783429 Jy ! Component: 100 - total flux cleaned = 0.000497998 Jy ! Component: 150 - total flux cleaned = 0.000407058 Jy ! Component: 200 - total flux cleaned = 0.000221187 Jy ! Total flux subtracted in 200 components = 0.000221187 Jy ! Clean residual min=-0.002155 max=0.003015 Jy/beam ! Clean residual mean=0.000013 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.108593 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 187 components and 0.108593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086255Jy sigma=0.000697 ! Fit after self-cal, rms=0.086384Jy sigma=0.000697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037187 Jy ! Component: 100 - total flux cleaned = 0.000148831 Jy ! Component: 150 - total flux cleaned = -1.54475e-05 Jy ! Component: 200 - total flux cleaned = -0.000136556 Jy ! Total flux subtracted in 200 components = -0.000136556 Jy ! Clean residual min=-0.002185 max=0.003033 Jy/beam ! Clean residual mean=0.000013 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.108457 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 206 components and 0.108457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086346Jy sigma=0.000696 ! Fit after self-cal, rms=0.086325Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086325Jy sigma=0.000696 ! Fit after self-cal, rms=0.086674Jy sigma=0.000696 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.301 mas, bmaj=19.75 mas, bpa=-17.19 degrees ! Estimated noise=861.061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526968 Jy ! Component: 100 - total flux cleaned = 0.000449417 Jy ! Component: 150 - total flux cleaned = 0.000482262 Jy ! Component: 200 - total flux cleaned = 0.000427497 Jy ! Total flux subtracted in 200 components = 0.000427497 Jy ! Clean residual min=-0.002093 max=0.003065 Jy/beam ! Clean residual mean=0.000015 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.108884 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 226 components and 0.108884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086634Jy sigma=0.000696 ! Fit after self-cal, rms=0.086693Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (35.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283462 Jy ! Component: 100 - total flux cleaned = 0.00445718 Jy ! Component: 150 - total flux cleaned = 0.00558219 Jy ! Component: 200 - total flux cleaned = 0.00610615 Jy ! Total flux subtracted in 200 components = 0.00610615 Jy ! Clean residual min=-0.002136 max=0.002543 Jy/beam ! Clean residual mean=0.000010 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.11499 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 291 components and 0.11499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086589Jy sigma=0.000695 ! Fit after self-cal, rms=0.086553Jy sigma=0.000695 ! Inverting map ! Added new window around map position (-123.5, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171862 Jy ! Component: 100 - total flux cleaned = 0.00248971 Jy ! Component: 150 - total flux cleaned = 0.00328631 Jy ! Component: 200 - total flux cleaned = 0.00372808 Jy ! Total flux subtracted in 200 components = 0.00372808 Jy ! Clean residual min=-0.002124 max=0.002011 Jy/beam ! Clean residual mean=0.000008 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.118719 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 327 components and 0.118719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086465Jy sigma=0.000694 ! Fit after self-cal, rms=0.086443Jy sigma=0.000694 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086443Jy sigma=0.000694 ! Fit after self-cal, rms=0.086536Jy sigma=0.000693 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.536 mas, bmaj=27.32 mas, bpa=-8.024 degrees ! Estimated noise=1046.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172316 Jy ! Component: 100 - total flux cleaned = 0.00236295 Jy ! Component: 150 - total flux cleaned = 0.00272314 Jy ! Component: 200 - total flux cleaned = 0.00275909 Jy ! Total flux subtracted in 200 components = 0.00275909 Jy ! Clean residual min=-0.002024 max=0.001718 Jy/beam ! Clean residual mean=0.000012 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.121478 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 381 components and 0.121478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086496Jy sigma=0.000693 ! Fit after self-cal, rms=0.086516Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000981169 Jy ! Component: 100 - total flux cleaned = 0.00122693 Jy ! Component: 150 - total flux cleaned = 0.00122977 Jy ! Component: 200 - total flux cleaned = 0.00114813 Jy ! Total flux subtracted in 200 components = 0.00114813 Jy ! Clean residual min=-0.001954 max=0.001689 Jy/beam ! Clean residual mean=0.000010 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.122626 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 416 components and 0.122626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086495Jy sigma=0.000693 ! Fit after self-cal, rms=0.086481Jy sigma=0.000693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=19.77 mas, bpa=-17.2 degrees ! Estimated noise=854.546 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.295 x 19.77 at -17.2 degrees (North through East) ! Clean map min=-0.0029435 max=0.057872 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=17.8 mas, bpa=-18.27 degrees ! Estimated noise=1448.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042544 Jy ! Component: 100 - total flux cleaned = 0.057887 Jy ! Component: 150 - total flux cleaned = 0.0676192 Jy ! Component: 200 - total flux cleaned = 0.0744312 Jy ! Total flux subtracted in 200 components = 0.0744312 Jy ! Clean residual min=-0.005136 max=0.004937 Jy/beam ! Clean residual mean=0.000006 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.0744312 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0744312 Jy ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=19.77 mas, bpa=-17.2 degrees ! Estimated noise=854.546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101985 Jy ! Component: 100 - total flux cleaned = 0.0170504 Jy ! Component: 150 - total flux cleaned = 0.0225086 Jy ! Component: 200 - total flux cleaned = 0.0270487 Jy ! Total flux subtracted in 200 components = 0.0270487 Jy ! Clean residual min=-0.003909 max=0.003623 Jy/beam ! Clean residual mean=0.000011 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.10148 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 103 components and 0.10148 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.536 mas, bmaj=27.32 mas, bpa=-8.024 degrees ! Estimated noise=1046.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058331 Jy ! Component: 100 - total flux cleaned = 0.00966839 Jy ! Component: 150 - total flux cleaned = 0.0120307 Jy ! Component: 200 - total flux cleaned = 0.0140713 Jy ! Total flux subtracted in 200 components = 0.0140713 Jy ! Clean residual min=-0.002902 max=0.002736 Jy/beam ! Clean residual mean=0.000015 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.115551 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170495 Jy ! Component: 100 - total flux cleaned = 0.00292226 Jy ! Component: 150 - total flux cleaned = 0.0035612 Jy ! Component: 200 - total flux cleaned = 0.00407039 Jy ! Total flux subtracted in 200 components = 0.00407039 Jy ! Clean residual min=-0.002311 max=0.002088 Jy/beam ! Clean residual mean=0.000014 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.119622 Jy ! Adding 135 model components to the UV plane model. ! The established model now contains 224 components and 0.119622 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=19.77 mas, bpa=-17.2 degrees ! Estimated noise=854.546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421394 Jy ! Component: 100 - total flux cleaned = 0.000613989 Jy ! Component: 150 - total flux cleaned = 0.00109206 Jy ! Component: 200 - total flux cleaned = 0.00148389 Jy ! Total flux subtracted in 200 components = 0.00148389 Jy ! Clean residual min=-0.002359 max=0.002597 Jy/beam ! Clean residual mean=0.000007 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.121106 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 257 components and 0.121106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086554Jy sigma=0.000694 ! Fit after self-cal, rms=0.086472Jy sigma=0.000693 wmodel J0128-1722_S_2017_10_21_pus_map.mod ! Writing 257 model components to file: J0128-1722_S_2017_10_21_pus_map.mod wobs J0128-1722_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0128-1722_S_2017_10_21_pus_uvs.fits wwins J0128-1722_S_2017_10_21_pus_map.win ! wwins: Wrote 4 windows to J0128-1722_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000666786 Jy ! Component: 100 - total flux cleaned = 0.000809937 Jy ! Component: 150 - total flux cleaned = 0.000776949 Jy ! Component: 200 - total flux cleaned = 0.000658329 Jy ! Component: 250 - total flux cleaned = 0.000462562 Jy ! Component: 300 - total flux cleaned = 0.000304129 Jy ! Component: 350 - total flux cleaned = 0.00022844 Jy ! Component: 400 - total flux cleaned = 8.29759e-05 Jy ! Component: 450 - total flux cleaned = 5.92118e-05 Jy ! Component: 500 - total flux cleaned = -3.24569e-05 Jy ! Component: 550 - total flux cleaned = -7.65693e-05 Jy ! Component: 600 - total flux cleaned = -0.000184619 Jy ! Component: 650 - total flux cleaned = -0.000247618 Jy ! Component: 700 - total flux cleaned = -0.000267789 Jy ! Component: 750 - total flux cleaned = -0.000307537 Jy ! Component: 800 - total flux cleaned = -0.00028706 Jy ! Component: 850 - total flux cleaned = -0.000267476 Jy ! Component: 900 - total flux cleaned = -0.000229327 Jy ! Component: 950 - total flux cleaned = -0.000284609 Jy ! Component: 1000 - total flux cleaned = -0.000266177 Jy ! Component: 1050 - total flux cleaned = -0.000337596 Jy ! Component: 1100 - total flux cleaned = -0.000372698 Jy ! Component: 1150 - total flux cleaned = -0.000458854 Jy ! Component: 1200 - total flux cleaned = -0.000509734 Jy ! Component: 1250 - total flux cleaned = -0.000593003 Jy ! Component: 1300 - total flux cleaned = -0.000625727 Jy ! Component: 1350 - total flux cleaned = -0.000706501 Jy ! Component: 1400 - total flux cleaned = -0.00072224 Jy ! Component: 1450 - total flux cleaned = -0.000769379 Jy ! Component: 1500 - total flux cleaned = -0.000831075 Jy ! Component: 1550 - total flux cleaned = -0.000861541 Jy ! Component: 1600 - total flux cleaned = -0.0009213 Jy ! Component: 1650 - total flux cleaned = -0.000920936 Jy ! Component: 1700 - total flux cleaned = -0.000964323 Jy ! Component: 1750 - total flux cleaned = -0.000949981 Jy ! Component: 1800 - total flux cleaned = -0.00100646 Jy ! Component: 1850 - total flux cleaned = -0.000978685 Jy ! Component: 1900 - total flux cleaned = -0.00101991 Jy ! Component: 1950 - total flux cleaned = -0.00103336 Jy ! Component: 2000 - total flux cleaned = -0.00101999 Jy ! Component: 2050 - total flux cleaned = -0.00101998 Jy ! Component: 2100 - total flux cleaned = -0.000980703 Jy ! Component: 2150 - total flux cleaned = -0.000980895 Jy ! Component: 2200 - total flux cleaned = -0.000929685 Jy ! Component: 2250 - total flux cleaned = -0.000879304 Jy ! Component: 2300 - total flux cleaned = -0.000854421 Jy ! Component: 2350 - total flux cleaned = -0.00080514 Jy ! Component: 2400 - total flux cleaned = -0.000792858 Jy ! Component: 2450 - total flux cleaned = -0.000744434 Jy ! Component: 2500 - total flux cleaned = -0.000684291 Jy ! Component: 2550 - total flux cleaned = -0.000601205 Jy ! Component: 2600 - total flux cleaned = -0.000542476 Jy ! Component: 2650 - total flux cleaned = -0.000495954 Jy ! Component: 2700 - total flux cleaned = -0.000403532 Jy ! Component: 2750 - total flux cleaned = -0.000357756 Jy ! Component: 2800 - total flux cleaned = -0.000267029 Jy ! Component: 2850 - total flux cleaned = -0.00022209 Jy ! Component: 2900 - total flux cleaned = -0.000155092 Jy ! Component: 2950 - total flux cleaned = -5.56178e-05 Jy ! Component: 3000 - total flux cleaned = -1.18544e-05 Jy ! Component: 3050 - total flux cleaned = 6.43248e-05 Jy ! Component: 3100 - total flux cleaned = 0.000128998 Jy ! Component: 3150 - total flux cleaned = 0.000171848 Jy ! Component: 3200 - total flux cleaned = 0.00023578 Jy ! Component: 3250 - total flux cleaned = 0.000278019 Jy ! Component: 3300 - total flux cleaned = 0.000309362 Jy ! Component: 3350 - total flux cleaned = 0.000309376 Jy ! Component: 3400 - total flux cleaned = 0.000361175 Jy ! Component: 3450 - total flux cleaned = 0.000371421 Jy ! Component: 3500 - total flux cleaned = 0.000371496 Jy ! Component: 3550 - total flux cleaned = 0.000401946 Jy ! Component: 3600 - total flux cleaned = 0.000422186 Jy ! Component: 3650 - total flux cleaned = 0.000462316 Jy ! Component: 3700 - total flux cleaned = 0.000452319 Jy ! Component: 3750 - total flux cleaned = 0.000442424 Jy ! Component: 3800 - total flux cleaned = 0.000472045 Jy ! Component: 3850 - total flux cleaned = 0.000481825 Jy ! Component: 3900 - total flux cleaned = 0.000481857 Jy ! Component: 3950 - total flux cleaned = 0.000540289 Jy ! Component: 4000 - total flux cleaned = 0.000540267 Jy ! Component: 4050 - total flux cleaned = 0.000549906 Jy ! Total flux subtracted in 4096 components = 0.000578736 Jy ! Clean residual min=-0.000521 max=0.000523 Jy/beam ! Clean residual mean=0.000003 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.121684 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 533 components and 0.121684 Jy ![Exited script file: muppet] wmap "J0128-1722_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.295 x 19.77 at -17.2 degrees (North through East) ! Clean map min=-0.0022712 max=0.057817 Jy/beam ! Writing clean map to FITS file: J0128-1722_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0578173 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000173317 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.899299 0.899299 1.7986 3.5972 7.19439 14.3888 28.7776 57.5551 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.295 x 19.77 at -17.2 degrees (North through East) ! Clean map min=-0.0022712 max=0.057817 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0128-1722_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:48:21 2019