! Started logfile: J0128-1722_S_2017_05_01_pus_uvs.log on Wed May 1 18:24:41 2019 obs J0128-1722_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0128-1722_S_2017_05_01_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.949474 visibilities/baseline/integration-bin. ! Found source: J0128-1722 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 16236 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0128-1722_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 437 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973197Jy sigma=0.005987 ! Fit after self-cal, rms=0.936315Jy sigma=0.005793 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=6.769 mas, bpa=-2.145 degrees ! Estimated noise=1357.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0523698 Jy ! Component: 100 - total flux cleaned = 0.0654679 Jy ! Total flux subtracted in 100 components = 0.0654679 Jy ! Clean residual min=-0.005276 max=0.009503 Jy/beam ! Clean residual mean=0.000003 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 0.0654679 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0654679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128065Jy sigma=0.000676 ! Fit after self-cal, rms=0.127540Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=7.863 mas, bpa=-1.654 degrees ! Estimated noise=1026.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135277 Jy ! Component: 100 - total flux cleaned = 0.0224496 Jy ! Component: 150 - total flux cleaned = 0.0288176 Jy ! Component: 200 - total flux cleaned = 0.0335136 Jy ! Total flux subtracted in 200 components = 0.0335136 Jy ! Clean residual min=-0.004495 max=0.005414 Jy/beam ! Clean residual mean=-0.000009 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.0989815 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 71 components and 0.0989815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125686Jy sigma=0.000662 ! Fit after self-cal, rms=0.125525Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.90 HN 1.09 KP 1.03 ! LA 0.93 MK 0.97 NL 1.08 OV 1.10 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.15 KP 0.96 ! LA 0.91 MK 1.00 NL 1.06 OV 1.10 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.97 HN 1.02 KP 0.99 ! LA 0.91 MK 1.21 NL 1.13 OV 1.03 ! PT 0.93 SC 1.07 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.92 HN 0.95 KP 1.00* ! LA 0.60 MK 0.94 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.125525Jy sigma=0.000659 ! Fit after self-cal, rms=0.119588Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=7.987 mas, bpa=-1.247 degrees ! Estimated noise=1002.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480056 Jy ! Component: 100 - total flux cleaned = 0.00641861 Jy ! Component: 150 - total flux cleaned = 0.00664434 Jy ! Component: 200 - total flux cleaned = 0.00658574 Jy ! Total flux subtracted in 200 components = 0.00658574 Jy ! Clean residual min=-0.003625 max=0.005291 Jy/beam ! Clean residual mean=0.000003 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.105567 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 96 components and 0.105567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119387Jy sigma=0.000655 ! Fit after self-cal, rms=0.119392Jy sigma=0.000654 ! Inverting map ! Added new window around map position (30, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00506739 Jy ! Component: 100 - total flux cleaned = 0.00807965 Jy ! Component: 150 - total flux cleaned = 0.0103098 Jy ! Component: 200 - total flux cleaned = 0.0119771 Jy ! Total flux subtracted in 200 components = 0.0119771 Jy ! Clean residual min=-0.003088 max=0.003312 Jy/beam ! Clean residual mean=0.000001 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.117544 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 0.117544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119151Jy sigma=0.000652 ! Fit after self-cal, rms=0.119068Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119068Jy sigma=0.000651 ! Fit after self-cal, rms=0.112085Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.542 mas, bmaj=7.988 mas, bpa=-1.252 degrees ! Estimated noise=993.029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292444 Jy ! Component: 100 - total flux cleaned = 0.00489848 Jy ! Component: 150 - total flux cleaned = 0.00587794 Jy ! Component: 200 - total flux cleaned = 0.00634883 Jy ! Total flux subtracted in 200 components = 0.00634883 Jy ! Clean residual min=-0.002671 max=0.002748 Jy/beam ! Clean residual mean=-0.000001 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.123893 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 138 components and 0.123893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111988Jy sigma=0.000650 ! Fit after self-cal, rms=0.111862Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188519 Jy ! Component: 100 - total flux cleaned = 0.00264388 Jy ! Component: 150 - total flux cleaned = 0.00289301 Jy ! Component: 200 - total flux cleaned = 0.00298397 Jy ! Total flux subtracted in 200 components = 0.00298397 Jy ! Clean residual min=-0.002638 max=0.002527 Jy/beam ! Clean residual mean=0.000000 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.126877 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 146 components and 0.126877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111806Jy sigma=0.000649 ! Fit after self-cal, rms=0.111772Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111772Jy sigma=0.000649 ! Fit after self-cal, rms=0.110424Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=7.977 mas, bpa=-1.172 degrees ! Estimated noise=988.006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146257 Jy ! Component: 100 - total flux cleaned = 0.0023024 Jy ! Component: 150 - total flux cleaned = 0.00262153 Jy ! Component: 200 - total flux cleaned = 0.00278732 Jy ! Total flux subtracted in 200 components = 0.00278732 Jy ! Clean residual min=-0.002783 max=0.002526 Jy/beam ! Clean residual mean=-0.000002 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.129664 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 156 components and 0.129664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110380Jy sigma=0.000648 ! Fit after self-cal, rms=0.110364Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000861757 Jy ! Component: 100 - total flux cleaned = 0.00103398 Jy ! Component: 150 - total flux cleaned = 0.00119346 Jy ! Component: 200 - total flux cleaned = 0.00123036 Jy ! Total flux subtracted in 200 components = 0.00123036 Jy ! Clean residual min=-0.002691 max=0.002481 Jy/beam ! Clean residual mean=-0.000001 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.130895 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 165 components and 0.130895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110334Jy sigma=0.000648 ! Fit after self-cal, rms=0.110312Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110312Jy sigma=0.000648 ! Fit after self-cal, rms=0.109657Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.765 mas, bmaj=15.67 mas, bpa=3.549 degrees ! Estimated noise=1172.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181626 Jy ! Component: 100 - total flux cleaned = 0.00267618 Jy ! Component: 150 - total flux cleaned = 0.00264051 Jy ! Component: 200 - total flux cleaned = 0.00261071 Jy ! Total flux subtracted in 200 components = 0.00261071 Jy ! Clean residual min=-0.003101 max=0.002677 Jy/beam ! Clean residual mean=-0.000003 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.133506 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 178 components and 0.133506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109644Jy sigma=0.000648 ! Fit after self-cal, rms=0.109640Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000689539 Jy ! Component: 100 - total flux cleaned = 0.000828738 Jy ! Component: 150 - total flux cleaned = 0.000800962 Jy ! Component: 200 - total flux cleaned = 0.000776409 Jy ! Total flux subtracted in 200 components = 0.000776409 Jy ! Clean residual min=-0.003035 max=0.002602 Jy/beam ! Clean residual mean=-0.000004 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.134282 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 183 components and 0.134282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109634Jy sigma=0.000648 ! Fit after self-cal, rms=0.109602Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=7.971 mas, bpa=-1.048 degrees ! Estimated noise=984.228 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 7.971 at -1.048 degrees (North through East) ! Clean map min=-0.0026506 max=0.063747 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=6.871 mas, bpa=-1.965 degrees ! Estimated noise=1298.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489706 Jy ! Component: 100 - total flux cleaned = 0.0657116 Jy ! Component: 150 - total flux cleaned = 0.0768974 Jy ! Component: 200 - total flux cleaned = 0.0856552 Jy ! Total flux subtracted in 200 components = 0.0856552 Jy ! Clean residual min=-0.004733 max=0.005564 Jy/beam ! Clean residual mean=0.000007 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.0856552 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0856552 Jy ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=7.971 mas, bpa=-1.048 degrees ! Estimated noise=984.228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101829 Jy ! Component: 100 - total flux cleaned = 0.0177962 Jy ! Component: 150 - total flux cleaned = 0.0237769 Jy ! Component: 200 - total flux cleaned = 0.0286289 Jy ! Total flux subtracted in 200 components = 0.0286289 Jy ! Clean residual min=-0.003315 max=0.003923 Jy/beam ! Clean residual mean=-0.000003 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.114284 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 66 components and 0.114284 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.765 mas, bmaj=15.67 mas, bpa=3.549 degrees ! Estimated noise=1172.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00625318 Jy ! Component: 100 - total flux cleaned = 0.010571 Jy ! Component: 150 - total flux cleaned = 0.0136617 Jy ! Component: 200 - total flux cleaned = 0.0159043 Jy ! Total flux subtracted in 200 components = 0.0159043 Jy ! Clean residual min=-0.003088 max=0.002972 Jy/beam ! Clean residual mean=-0.000002 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.130188 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165657 Jy ! Component: 100 - total flux cleaned = 0.00276563 Jy ! Component: 150 - total flux cleaned = 0.00324934 Jy ! Component: 200 - total flux cleaned = 0.00346152 Jy ! Total flux subtracted in 200 components = 0.00346152 Jy ! Clean residual min=-0.002900 max=0.002855 Jy/beam ! Clean residual mean=-0.000001 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.13365 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 125 components and 0.13365 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=7.971 mas, bpa=-1.048 degrees ! Estimated noise=984.228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121287 Jy ! Component: 100 - total flux cleaned = 0.00115881 Jy ! Component: 150 - total flux cleaned = 0.00104714 Jy ! Component: 200 - total flux cleaned = 0.000995871 Jy ! Total flux subtracted in 200 components = 0.000995871 Jy ! Clean residual min=-0.002727 max=0.002544 Jy/beam ! Clean residual mean=-0.000000 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.134646 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 146 components and 0.134646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109659Jy sigma=0.000648 ! Fit after self-cal, rms=0.109614Jy sigma=0.000648 wmodel J0128-1722_S_2017_05_01_pus_map.mod ! Writing 146 model components to file: J0128-1722_S_2017_05_01_pus_map.mod wobs J0128-1722_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0128-1722_S_2017_05_01_pus_uvs.fits wwins J0128-1722_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J0128-1722_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024162 Jy ! Component: 100 - total flux cleaned = 0.00028446 Jy ! Component: 150 - total flux cleaned = 0.000202515 Jy ! Component: 200 - total flux cleaned = 4.18446e-06 Jy ! Component: 250 - total flux cleaned = -0.000261964 Jy ! Component: 300 - total flux cleaned = -0.00040837 Jy ! Component: 350 - total flux cleaned = -0.000658332 Jy ! Component: 400 - total flux cleaned = -0.000900117 Jy ! Component: 450 - total flux cleaned = -0.00110286 Jy ! Component: 500 - total flux cleaned = -0.00126836 Jy ! Component: 550 - total flux cleaned = -0.00152641 Jy ! Component: 600 - total flux cleaned = -0.00174639 Jy ! Component: 650 - total flux cleaned = -0.00190077 Jy ! Component: 700 - total flux cleaned = -0.00205159 Jy ! Component: 750 - total flux cleaned = -0.00219892 Jy ! Component: 800 - total flux cleaned = -0.00231434 Jy ! Component: 850 - total flux cleaned = -0.00248319 Jy ! Component: 900 - total flux cleaned = -0.00253802 Jy ! Component: 950 - total flux cleaned = -0.00264677 Jy ! Component: 1000 - total flux cleaned = -0.00275331 Jy ! Component: 1050 - total flux cleaned = -0.00285778 Jy ! Component: 1100 - total flux cleaned = -0.00285769 Jy ! Component: 1150 - total flux cleaned = -0.0029087 Jy ! Component: 1200 - total flux cleaned = -0.00288432 Jy ! Component: 1250 - total flux cleaned = -0.00281168 Jy ! Component: 1300 - total flux cleaned = -0.00288379 Jy ! Component: 1350 - total flux cleaned = -0.00293139 Jy ! Component: 1400 - total flux cleaned = -0.00300023 Jy ! Component: 1450 - total flux cleaned = -0.00295372 Jy ! Component: 1500 - total flux cleaned = -0.00290827 Jy ! Component: 1550 - total flux cleaned = -0.00299762 Jy ! Component: 1600 - total flux cleaned = -0.00304129 Jy ! Component: 1650 - total flux cleaned = -0.00314977 Jy ! Component: 1700 - total flux cleaned = -0.00317096 Jy ! Component: 1750 - total flux cleaned = -0.00315003 Jy ! Component: 1800 - total flux cleaned = -0.00327553 Jy ! Component: 1850 - total flux cleaned = -0.00325486 Jy ! Component: 1900 - total flux cleaned = -0.0033369 Jy ! Component: 1950 - total flux cleaned = -0.00343808 Jy ! Component: 2000 - total flux cleaned = -0.00349807 Jy ! Component: 2050 - total flux cleaned = -0.0036561 Jy ! Component: 2100 - total flux cleaned = -0.00371464 Jy ! Component: 2150 - total flux cleaned = -0.00379235 Jy ! Component: 2200 - total flux cleaned = -0.00390726 Jy ! Component: 2250 - total flux cleaned = -0.00388845 Jy ! Component: 2300 - total flux cleaned = -0.00400135 Jy ! Component: 2350 - total flux cleaned = -0.00401985 Jy ! Component: 2400 - total flux cleaned = -0.00411201 Jy ! Component: 2450 - total flux cleaned = -0.00416674 Jy ! Component: 2500 - total flux cleaned = -0.00418497 Jy ! Component: 2550 - total flux cleaned = -0.00427454 Jy ! Component: 2600 - total flux cleaned = -0.00429235 Jy ! Component: 2650 - total flux cleaned = -0.00439797 Jy ! Component: 2700 - total flux cleaned = -0.00439774 Jy ! Component: 2750 - total flux cleaned = -0.00444964 Jy ! Component: 2800 - total flux cleaned = -0.00441547 Jy ! Component: 2850 - total flux cleaned = -0.00455148 Jy ! Component: 2900 - total flux cleaned = -0.00453439 Jy ! Component: 2950 - total flux cleaned = -0.00456785 Jy ! Component: 3000 - total flux cleaned = -0.00455135 Jy ! Component: 3050 - total flux cleaned = -0.00465022 Jy ! Component: 3100 - total flux cleaned = -0.00465013 Jy ! Component: 3150 - total flux cleaned = -0.00471492 Jy ! Component: 3200 - total flux cleaned = -0.00465059 Jy ! Component: 3250 - total flux cleaned = -0.00473044 Jy ! Component: 3300 - total flux cleaned = -0.00476227 Jy ! Component: 3350 - total flux cleaned = -0.00477816 Jy ! Component: 3400 - total flux cleaned = -0.00484085 Jy ! Component: 3450 - total flux cleaned = -0.00488729 Jy ! Component: 3500 - total flux cleaned = -0.00496421 Jy ! Component: 3550 - total flux cleaned = -0.00493357 Jy ! Component: 3600 - total flux cleaned = -0.00500961 Jy ! Component: 3650 - total flux cleaned = -0.00502463 Jy ! Component: 3700 - total flux cleaned = -0.00509938 Jy ! Component: 3750 - total flux cleaned = -0.00517377 Jy ! Component: 3800 - total flux cleaned = -0.00517357 Jy ! Component: 3850 - total flux cleaned = -0.00515888 Jy ! Component: 3900 - total flux cleaned = -0.00524648 Jy ! Component: 3950 - total flux cleaned = -0.00526088 Jy ! Component: 4000 - total flux cleaned = -0.00528978 Jy ! Component: 4050 - total flux cleaned = -0.00534697 Jy ! Total flux subtracted in 4096 components = -0.00536106 Jy ! Clean residual min=-0.000961 max=0.000838 Jy/beam ! Clean residual mean=-0.000004 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.129285 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 447 components and 0.129285 Jy ![Exited script file: muppet] wmap "J0128-1722_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 7.971 at -1.048 degrees (North through East) ! Clean map min=-0.0018089 max=0.063816 Jy/beam ! Writing clean map to FITS file: J0128-1722_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0638162 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259974 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22214 1.22214 2.44428 4.88855 9.77711 19.5542 39.1084 78.2169 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 7.971 at -1.048 degrees (North through East) ! Clean map min=-0.0018089 max=0.063816 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0128-1722_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:24:48 2019