! Started logfile: J0128+4901_S_2017_05_01_pus_uvs.log on Wed May 1 18:24:48 2019 obs J0128+4901_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0128+4901_S_2017_05_01_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.960819 visibilities/baseline/integration-bin. ! Found source: J0128+4901 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 19716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0128+4901_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 485 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.882679Jy sigma=0.023729 ! Fit after self-cal, rms=0.870060Jy sigma=0.023693 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=4.838 mas, bpa=-13.53 degrees ! Estimated noise=1003.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.088895 Jy ! Component: 100 - total flux cleaned = 0.121448 Jy ! Total flux subtracted in 100 components = 0.121448 Jy ! Clean residual min=-0.009689 max=0.014803 Jy/beam ! Clean residual mean=0.000014 rms=0.003356 Jy/beam ! Combined flux in latest and established models = 0.121448 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.121448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102478Jy sigma=0.002058 ! Fit after self-cal, rms=0.102239Jy sigma=0.002056 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=5.659 mas, bpa=-16.42 degrees ! Estimated noise=575.501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216581 Jy ! Component: 100 - total flux cleaned = 0.0328773 Jy ! Component: 150 - total flux cleaned = 0.039107 Jy ! Component: 200 - total flux cleaned = 0.0423162 Jy ! Total flux subtracted in 200 components = 0.0423162 Jy ! Clean residual min=-0.011256 max=0.013426 Jy/beam ! Clean residual mean=0.000009 rms=0.003739 Jy/beam ! Combined flux in latest and established models = 0.163764 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 33 components and 0.163764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096676Jy sigma=0.002097 ! Fit after self-cal, rms=0.096420Jy sigma=0.002096 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.89 HN 0.91 KP 0.94 ! LA 0.94 MK 1.07 NL 0.89 OV 0.96 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 0.96 KP 0.93 ! LA 0.91 MK 1.00 NL 0.94 OV 1.11 ! PT 0.94 SC 27.32 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 0.91 KP 0.95 ! LA 0.93 MK 1.08 NL 0.93 OV 0.90 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.84 KP 1.00* ! LA 0.96 MK 1.01 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.096420Jy sigma=0.002096 ! Fit after self-cal, rms=0.909907Jy sigma=0.000724 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.08 mas, bmaj=5.798 mas, bpa=-7.82 degrees ! Estimated noise=659.094 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195458 Jy ! Component: 100 - total flux cleaned = 0.000600845 Jy ! Component: 150 - total flux cleaned = -0.000536252 Jy ! Component: 200 - total flux cleaned = -0.00142547 Jy ! Total flux subtracted in 200 components = -0.00142547 Jy ! Clean residual min=-0.004022 max=0.004130 Jy/beam ! Clean residual mean=0.000004 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.162338 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.162338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.907859Jy sigma=0.000718 ! Fit after self-cal, rms=0.908252Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.908252Jy sigma=0.000711 ! Fit after self-cal, rms=0.806326Jy sigma=0.000689 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=5.608 mas, bpa=-9.657 degrees ! Estimated noise=659.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120678 Jy ! Component: 100 - total flux cleaned = 0.00108998 Jy ! Component: 150 - total flux cleaned = 0.000913173 Jy ! Component: 200 - total flux cleaned = 0.000684 Jy ! Total flux subtracted in 200 components = 0.000684 Jy ! Clean residual min=-0.002689 max=0.002516 Jy/beam ! Clean residual mean=0.000006 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.163022 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.163022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.805540Jy sigma=0.000689 ! Fit after self-cal, rms=0.805571Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000325718 Jy ! Component: 100 - total flux cleaned = -0.000440886 Jy ! Component: 150 - total flux cleaned = -0.000701191 Jy ! Component: 200 - total flux cleaned = -0.000887074 Jy ! Total flux subtracted in 200 components = -0.000887074 Jy ! Clean residual min=-0.002653 max=0.002458 Jy/beam ! Clean residual mean=0.000006 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.162135 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.162135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.805290Jy sigma=0.000689 ! Fit after self-cal, rms=0.805294Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.805294Jy sigma=0.000689 ! Fit after self-cal, rms=0.677595Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4 mas, bmaj=5.601 mas, bpa=-7.11 degrees ! Estimated noise=667.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109132 Jy ! Component: 100 - total flux cleaned = 0.00123318 Jy ! Component: 150 - total flux cleaned = 0.00126501 Jy ! Component: 200 - total flux cleaned = 0.00134426 Jy ! Total flux subtracted in 200 components = 0.00134426 Jy ! Clean residual min=-0.001942 max=0.001833 Jy/beam ! Clean residual mean=0.000005 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.16348 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.16348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.677385Jy sigma=0.000675 ! Fit after self-cal, rms=0.677386Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.13214e-05 Jy ! Component: 100 - total flux cleaned = 6.67536e-05 Jy ! Component: 150 - total flux cleaned = 9.6449e-05 Jy ! Component: 200 - total flux cleaned = 0.000108769 Jy ! Total flux subtracted in 200 components = 0.000108769 Jy ! Clean residual min=-0.001960 max=0.001839 Jy/beam ! Clean residual mean=0.000005 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.163588 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.163588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.677333Jy sigma=0.000675 ! Fit after self-cal, rms=0.677334Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.677334Jy sigma=0.000675 ! Fit after self-cal, rms=0.698678Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.096 mas, bmaj=9.093 mas, bpa=6.569 degrees ! Estimated noise=778.869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111309 Jy ! Component: 100 - total flux cleaned = 0.0011146 Jy ! Component: 150 - total flux cleaned = 0.00115037 Jy ! Component: 200 - total flux cleaned = 0.00117677 Jy ! Total flux subtracted in 200 components = 0.00117677 Jy ! Clean residual min=-0.001955 max=0.001704 Jy/beam ! Clean residual mean=0.000013 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.164765 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 78 components and 0.164765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.698533Jy sigma=0.000675 ! Fit after self-cal, rms=0.698535Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104096 Jy ! Component: 100 - total flux cleaned = -9.25817e-05 Jy ! Component: 150 - total flux cleaned = -7.20347e-05 Jy ! Component: 200 - total flux cleaned = -5.46013e-05 Jy ! Total flux subtracted in 200 components = -5.46013e-05 Jy ! Clean residual min=-0.001946 max=0.001722 Jy/beam ! Clean residual mean=0.000013 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.164711 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 0.164711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.698492Jy sigma=0.000675 ! Fit after self-cal, rms=0.698493Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.014 mas, bmaj=5.598 mas, bpa=-5.489 degrees ! Estimated noise=677.289 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.014 x 5.598 at -5.489 degrees (North through East) ! Clean map min=-0.0018564 max=0.13009 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=4.78 mas, bpa=-5.717 degrees ! Estimated noise=1160.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101003 Jy ! Component: 100 - total flux cleaned = 0.134471 Jy ! Component: 150 - total flux cleaned = 0.149355 Jy ! Component: 200 - total flux cleaned = 0.156976 Jy ! Total flux subtracted in 200 components = 0.156976 Jy ! Clean residual min=-0.002854 max=0.003641 Jy/beam ! Clean residual mean=0.000005 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.156976 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.156976 Jy ! Inverting map and beam ! Estimated beam: bmin=4.014 mas, bmaj=5.598 mas, bpa=-5.489 degrees ! Estimated noise=677.289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048675 Jy ! Component: 100 - total flux cleaned = 0.00707881 Jy ! Component: 150 - total flux cleaned = 0.00806908 Jy ! Component: 200 - total flux cleaned = 0.00813964 Jy ! Total flux subtracted in 200 components = 0.00813964 Jy ! Clean residual min=-0.002002 max=0.001849 Jy/beam ! Clean residual mean=0.000005 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.165115 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 42 components and 0.165115 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.096 mas, bmaj=9.093 mas, bpa=6.569 degrees ! Estimated noise=778.869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127177 Jy ! Component: 100 - total flux cleaned = -0.000123452 Jy ! Component: 150 - total flux cleaned = -0.000152562 Jy ! Component: 200 - total flux cleaned = -0.000175548 Jy ! Total flux subtracted in 200 components = -0.000175548 Jy ! Clean residual min=-0.001926 max=0.001732 Jy/beam ! Clean residual mean=0.000013 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.16494 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.07696e-05 Jy ! Component: 100 - total flux cleaned = -5.01063e-05 Jy ! Component: 150 - total flux cleaned = -7.72887e-05 Jy ! Component: 200 - total flux cleaned = -9.43042e-05 Jy ! Total flux subtracted in 200 components = -9.43042e-05 Jy ! Clean residual min=-0.001927 max=0.001725 Jy/beam ! Clean residual mean=0.000013 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.164846 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.164846 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.014 mas, bmaj=5.598 mas, bpa=-5.489 degrees ! Estimated noise=677.289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432472 Jy ! Component: 100 - total flux cleaned = 0.000521508 Jy ! Component: 150 - total flux cleaned = 0.000559551 Jy ! Component: 200 - total flux cleaned = 0.000575713 Jy ! Total flux subtracted in 200 components = 0.000575713 Jy ! Clean residual min=-0.001983 max=0.001831 Jy/beam ! Clean residual mean=0.000005 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.165421 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.165421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.698478Jy sigma=0.000675 ! Fit after self-cal, rms=0.698478Jy sigma=0.000675 wmodel J0128+4901_S_2017_05_01_pus_map.mod ! Writing 58 model components to file: J0128+4901_S_2017_05_01_pus_map.mod wobs J0128+4901_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0128+4901_S_2017_05_01_pus_uvs.fits wwins J0128+4901_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J0128+4901_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000439763 Jy ! Component: 100 - total flux cleaned = -0.000305535 Jy ! Component: 150 - total flux cleaned = -0.000144534 Jy ! Component: 200 - total flux cleaned = -0.000112611 Jy ! Component: 250 - total flux cleaned = -8.226e-05 Jy ! Component: 300 - total flux cleaned = -5.27906e-05 Jy ! Component: 350 - total flux cleaned = 3.43557e-05 Jy ! Component: 400 - total flux cleaned = -5.17517e-05 Jy ! Component: 450 - total flux cleaned = -8.01784e-05 Jy ! Component: 500 - total flux cleaned = -0.000191793 Jy ! Component: 550 - total flux cleaned = -0.000301539 Jy ! Component: 600 - total flux cleaned = -0.000301271 Jy ! Component: 650 - total flux cleaned = -0.000382431 Jy ! Component: 700 - total flux cleaned = -0.000541758 Jy ! Component: 750 - total flux cleaned = -0.000594459 Jy ! Component: 800 - total flux cleaned = -0.000672108 Jy ! Component: 850 - total flux cleaned = -0.000723924 Jy ! Component: 900 - total flux cleaned = -0.000825784 Jy ! Component: 950 - total flux cleaned = -0.000901143 Jy ! Component: 1000 - total flux cleaned = -0.000950619 Jy ! Component: 1050 - total flux cleaned = -0.000950471 Jy ! Component: 1100 - total flux cleaned = -0.00102384 Jy ! Component: 1150 - total flux cleaned = -0.000999819 Jy ! Component: 1200 - total flux cleaned = -0.00107193 Jy ! Component: 1250 - total flux cleaned = -0.00107194 Jy ! Component: 1300 - total flux cleaned = -0.00102486 Jy ! Component: 1350 - total flux cleaned = -0.00109479 Jy ! Component: 1400 - total flux cleaned = -0.00111828 Jy ! Component: 1450 - total flux cleaned = -0.00118723 Jy ! Component: 1500 - total flux cleaned = -0.00130121 Jy ! Component: 1550 - total flux cleaned = -0.00136899 Jy ! Component: 1600 - total flux cleaned = -0.00143623 Jy ! Component: 1650 - total flux cleaned = -0.00150312 Jy ! Component: 1700 - total flux cleaned = -0.00161368 Jy ! Component: 1750 - total flux cleaned = -0.00165753 Jy ! Component: 1800 - total flux cleaned = -0.00178834 Jy ! Component: 1850 - total flux cleaned = -0.00185314 Jy ! Component: 1900 - total flux cleaned = -0.0018746 Jy ! Component: 1950 - total flux cleaned = -0.00202405 Jy ! Component: 2000 - total flux cleaned = -0.00210867 Jy ! Component: 2050 - total flux cleaned = -0.0021086 Jy ! Component: 2100 - total flux cleaned = -0.00219238 Jy ! Component: 2150 - total flux cleaned = -0.00223402 Jy ! Component: 2200 - total flux cleaned = -0.0023165 Jy ! Component: 2250 - total flux cleaned = -0.00233713 Jy ! Component: 2300 - total flux cleaned = -0.00239823 Jy ! Component: 2350 - total flux cleaned = -0.00245897 Jy ! Component: 2400 - total flux cleaned = -0.00245883 Jy ! Component: 2450 - total flux cleaned = -0.00251886 Jy ! Component: 2500 - total flux cleaned = -0.00253874 Jy ! Component: 2550 - total flux cleaned = -0.00259811 Jy ! Component: 2600 - total flux cleaned = -0.00265708 Jy ! Component: 2650 - total flux cleaned = -0.00271577 Jy ! Component: 2700 - total flux cleaned = -0.00285191 Jy ! Component: 2750 - total flux cleaned = -0.0028519 Jy ! Component: 2800 - total flux cleaned = -0.00292888 Jy ! Component: 2850 - total flux cleaned = -0.00292889 Jy ! Component: 2900 - total flux cleaned = -0.00298604 Jy ! Component: 2950 - total flux cleaned = -0.00306164 Jy ! Component: 3000 - total flux cleaned = -0.0031745 Jy ! Component: 3050 - total flux cleaned = -0.00315602 Jy ! Component: 3100 - total flux cleaned = -0.00321187 Jy ! Component: 3150 - total flux cleaned = -0.00332303 Jy ! Component: 3200 - total flux cleaned = -0.00332308 Jy ! Component: 3250 - total flux cleaned = -0.00334132 Jy ! Component: 3300 - total flux cleaned = -0.00339606 Jy ! Component: 3350 - total flux cleaned = -0.00343243 Jy ! Component: 3400 - total flux cleaned = -0.00350477 Jy ! Component: 3450 - total flux cleaned = -0.00354088 Jy ! Component: 3500 - total flux cleaned = -0.00363052 Jy ! Component: 3550 - total flux cleaned = -0.00363049 Jy ! Component: 3600 - total flux cleaned = -0.00370147 Jy ! Component: 3650 - total flux cleaned = -0.00373685 Jy ! Component: 3700 - total flux cleaned = -0.00377206 Jy ! Component: 3750 - total flux cleaned = -0.00382462 Jy ! Component: 3800 - total flux cleaned = -0.00387687 Jy ! Component: 3850 - total flux cleaned = -0.00385966 Jy ! Component: 3900 - total flux cleaned = -0.00391153 Jy ! Component: 3950 - total flux cleaned = -0.00398032 Jy ! Component: 4000 - total flux cleaned = -0.00403162 Jy ! Component: 4050 - total flux cleaned = -0.00404869 Jy ! Total flux subtracted in 4096 components = -0.00413338 Jy ! Clean residual min=-0.001193 max=0.000880 Jy/beam ! Clean residual mean=0.000004 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.161288 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 377 components and 0.161288 Jy ![Exited script file: muppet] wmap "J0128+4901_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.014 x 5.598 at -5.489 degrees (North through East) ! Clean map min=-0.0016556 max=0.13024 Jy/beam ! Writing clean map to FITS file: J0128+4901_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.130236 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000308574 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.710803 0.710803 1.42161 2.84321 5.68643 11.3729 22.7457 45.4914 90.9828 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.014 x 5.598 at -5.489 degrees (North through East) ! Clean map min=-0.0016556 max=0.13024 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0128+4901_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:24:56 2019