! Started logfile: J0127-0821_S_2017_07_16_pus_uvs.log on Thu May 9 10:57:18 2019 obs J0127-0821_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0127-0821_S_2017_07_16_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.660819 visibilities/baseline/integration-bin. ! Found source: J0127-0821 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 13560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0127-0821_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 825 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.875843Jy sigma=0.007276 ! Fit after self-cal, rms=0.858670Jy sigma=0.007148 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.413 mas, bmaj=6.739 mas, bpa=-5.733 degrees ! Estimated noise=1273.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110804 Jy ! Component: 100 - total flux cleaned = 0.135988 Jy ! Total flux subtracted in 100 components = 0.135988 Jy ! Clean residual min=-0.005454 max=0.009201 Jy/beam ! Clean residual mean=-0.000005 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 0.135988 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.135988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090072Jy sigma=0.000685 ! Fit after self-cal, rms=0.090081Jy sigma=0.000685 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=7.383 mas, bpa=-4.886 degrees ! Estimated noise=918.646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111598 Jy ! Component: 100 - total flux cleaned = 0.0164655 Jy ! Component: 150 - total flux cleaned = 0.0194673 Jy ! Component: 200 - total flux cleaned = 0.0212524 Jy ! Total flux subtracted in 200 components = 0.0212524 Jy ! Clean residual min=-0.004244 max=0.004361 Jy/beam ! Clean residual mean=-0.000005 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.15724 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 34 components and 0.15724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088644Jy sigma=0.000675 ! Fit after self-cal, rms=0.088659Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.94 KP 1.00 ! LA 1.02 MK 1.01 NL 0.98 OV 1.00 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.01 KP 1.01 ! LA 0.98 MK 0.99 NL 1.14 OV 1.03 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 0.95 ! LA 0.99 MK 1.05 NL 1.05 OV 0.91 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! A total of 315 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.088659Jy sigma=0.000674 ! Fit after self-cal, rms=0.086477Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.793 mas, bmaj=7.382 mas, bpa=-3.863 degrees ! Estimated noise=927.769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331037 Jy ! Component: 100 - total flux cleaned = 0.000335658 Jy ! Component: 150 - total flux cleaned = 0.000334778 Jy ! Component: 200 - total flux cleaned = 0.000294414 Jy ! Total flux subtracted in 200 components = 0.000294414 Jy ! Clean residual min=-0.004236 max=0.004100 Jy/beam ! Clean residual mean=-0.000005 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.157535 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.157535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086456Jy sigma=0.000675 ! Fit after self-cal, rms=0.086427Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086427Jy sigma=0.000675 ! Fit after self-cal, rms=0.086637Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.793 mas, bmaj=7.384 mas, bpa=-3.916 degrees ! Estimated noise=931.732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000686266 Jy ! Component: 100 - total flux cleaned = 0.000857486 Jy ! Component: 150 - total flux cleaned = 0.000950589 Jy ! Component: 200 - total flux cleaned = 0.00099647 Jy ! Total flux subtracted in 200 components = 0.00099647 Jy ! Clean residual min=-0.002226 max=0.002197 Jy/beam ! Clean residual mean=-0.000003 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.158531 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.158531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086630Jy sigma=0.000666 ! Fit after self-cal, rms=0.086666Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.87194e-05 Jy ! Component: 100 - total flux cleaned = 0.000106903 Jy ! Component: 150 - total flux cleaned = 0.000132627 Jy ! Component: 200 - total flux cleaned = 0.000148882 Jy ! Total flux subtracted in 200 components = 0.000148882 Jy ! Clean residual min=-0.002238 max=0.002203 Jy/beam ! Clean residual mean=-0.000003 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.15868 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.15868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086663Jy sigma=0.000666 ! Fit after self-cal, rms=0.086663Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086663Jy sigma=0.000666 ! Fit after self-cal, rms=0.087131Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.379 mas, bpa=-3.925 degrees ! Estimated noise=931.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218078 Jy ! Component: 100 - total flux cleaned = 0.000253253 Jy ! Component: 150 - total flux cleaned = 0.00026071 Jy ! Component: 200 - total flux cleaned = 0.000260833 Jy ! Total flux subtracted in 200 components = 0.000260833 Jy ! Clean residual min=-0.002206 max=0.002166 Jy/beam ! Clean residual mean=-0.000002 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.158941 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.158941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087129Jy sigma=0.000666 ! Fit after self-cal, rms=0.087140Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17735e-05 Jy ! Component: 100 - total flux cleaned = 4.54306e-06 Jy ! Component: 150 - total flux cleaned = 1.09166e-05 Jy ! Component: 200 - total flux cleaned = 1.7251e-05 Jy ! Total flux subtracted in 200 components = 1.7251e-05 Jy ! Clean residual min=-0.002207 max=0.002159 Jy/beam ! Clean residual mean=-0.000002 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.158958 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.158958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087138Jy sigma=0.000666 ! Fit after self-cal, rms=0.087138Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087138Jy sigma=0.000666 ! Fit after self-cal, rms=0.087167Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.579 mas, bmaj=13.34 mas, bpa=-3.667 degrees ! Estimated noise=1273.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319689 Jy ! Component: 100 - total flux cleaned = 0.000349978 Jy ! Component: 150 - total flux cleaned = 0.000382845 Jy ! Component: 200 - total flux cleaned = 0.00040329 Jy ! Total flux subtracted in 200 components = 0.00040329 Jy ! Clean residual min=-0.002677 max=0.002390 Jy/beam ! Clean residual mean=-0.000004 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.159361 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 67 components and 0.159361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087167Jy sigma=0.000666 ! Fit after self-cal, rms=0.087165Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.48534e-05 Jy ! Component: 100 - total flux cleaned = -6.31157e-06 Jy ! Component: 150 - total flux cleaned = 9.43996e-06 Jy ! Component: 200 - total flux cleaned = 1.41993e-05 Jy ! Total flux subtracted in 200 components = 1.41993e-05 Jy ! Clean residual min=-0.002677 max=0.002391 Jy/beam ! Clean residual mean=-0.000004 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.159376 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 69 components and 0.159376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087167Jy sigma=0.000666 ! Fit after self-cal, rms=0.087166Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=7.377 mas, bpa=-3.935 degrees ! Estimated noise=931.466 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.788 x 7.377 at -3.935 degrees (North through East) ! Clean map min=-0.0020636 max=0.14464 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.458 mas, bmaj=6.715 mas, bpa=-4.687 degrees ! Estimated noise=1302.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11073 Jy ! Component: 100 - total flux cleaned = 0.135802 Jy ! Component: 150 - total flux cleaned = 0.145328 Jy ! Component: 200 - total flux cleaned = 0.150269 Jy ! Total flux subtracted in 200 components = 0.150269 Jy ! Clean residual min=-0.003546 max=0.003729 Jy/beam ! Clean residual mean=-0.000003 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.150269 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.150269 Jy ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=7.377 mas, bpa=-3.935 degrees ! Estimated noise=931.466 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408095 Jy ! Component: 100 - total flux cleaned = 0.00625659 Jy ! Component: 150 - total flux cleaned = 0.00756724 Jy ! Component: 200 - total flux cleaned = 0.00834196 Jy ! Total flux subtracted in 200 components = 0.00834196 Jy ! Clean residual min=-0.002223 max=0.002141 Jy/beam ! Clean residual mean=-0.000002 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.158611 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.158611 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.579 mas, bmaj=13.34 mas, bpa=-3.667 degrees ! Estimated noise=1273.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00067955 Jy ! Component: 100 - total flux cleaned = 0.000819214 Jy ! Component: 150 - total flux cleaned = 0.00083773 Jy ! Component: 200 - total flux cleaned = 0.000837936 Jy ! Total flux subtracted in 200 components = 0.000837936 Jy ! Clean residual min=-0.002662 max=0.002398 Jy/beam ! Clean residual mean=-0.000004 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.159449 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.71984e-06 Jy ! Component: 100 - total flux cleaned = 1.45587e-05 Jy ! Component: 150 - total flux cleaned = 2.08413e-05 Jy ! Component: 200 - total flux cleaned = 2.61938e-05 Jy ! Total flux subtracted in 200 components = 2.61938e-05 Jy ! Clean residual min=-0.002659 max=0.002395 Jy/beam ! Clean residual mean=-0.000004 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.159475 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.159475 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=7.377 mas, bpa=-3.935 degrees ! Estimated noise=931.466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265605 Jy ! Component: 100 - total flux cleaned = -0.000349393 Jy ! Component: 150 - total flux cleaned = -0.000350927 Jy ! Component: 200 - total flux cleaned = -0.000323233 Jy ! Total flux subtracted in 200 components = -0.000323233 Jy ! Clean residual min=-0.002205 max=0.002142 Jy/beam ! Clean residual mean=-0.000002 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.159152 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.159152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087170Jy sigma=0.000666 ! Fit after self-cal, rms=0.087169Jy sigma=0.000666 wmodel J0127-0821_S_2017_07_16_pus_map.mod ! Writing 62 model components to file: J0127-0821_S_2017_07_16_pus_map.mod wobs J0127-0821_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0127-0821_S_2017_07_16_pus_uvs.fits wwins J0127-0821_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0127-0821_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012734 Jy ! Component: 100 - total flux cleaned = -0.000425432 Jy ! Component: 150 - total flux cleaned = -0.00071016 Jy ! Component: 200 - total flux cleaned = -0.00101781 Jy ! Component: 250 - total flux cleaned = -0.00121471 Jy ! Component: 300 - total flux cleaned = -0.001438 Jy ! Component: 350 - total flux cleaned = -0.0015931 Jy ! Component: 400 - total flux cleaned = -0.00186466 Jy ! Component: 450 - total flux cleaned = -0.00198238 Jy ! Component: 500 - total flux cleaned = -0.00201151 Jy ! Component: 550 - total flux cleaned = -0.00212438 Jy ! Component: 600 - total flux cleaned = -0.00212425 Jy ! Component: 650 - total flux cleaned = -0.00212435 Jy ! Component: 700 - total flux cleaned = -0.00207213 Jy ! Component: 750 - total flux cleaned = -0.00209863 Jy ! Component: 800 - total flux cleaned = -0.00209873 Jy ! Component: 850 - total flux cleaned = -0.00207359 Jy ! Component: 900 - total flux cleaned = -0.00199946 Jy ! Component: 950 - total flux cleaned = -0.0019026 Jy ! Component: 1000 - total flux cleaned = -0.00185539 Jy ! Component: 1050 - total flux cleaned = -0.00169055 Jy ! Component: 1100 - total flux cleaned = -0.00164391 Jy ! Component: 1150 - total flux cleaned = -0.00148366 Jy ! Component: 1200 - total flux cleaned = -0.00139352 Jy ! Component: 1250 - total flux cleaned = -0.00130414 Jy ! Component: 1300 - total flux cleaned = -0.00119382 Jy ! Component: 1350 - total flux cleaned = -0.000998743 Jy ! Component: 1400 - total flux cleaned = -0.00087044 Jy ! Component: 1450 - total flux cleaned = -0.000786107 Jy ! Component: 1500 - total flux cleaned = -0.000682202 Jy ! Component: 1550 - total flux cleaned = -0.00053839 Jy ! Component: 1600 - total flux cleaned = -0.000457769 Jy ! Component: 1650 - total flux cleaned = -0.000338529 Jy ! Component: 1700 - total flux cleaned = -0.000279583 Jy ! Component: 1750 - total flux cleaned = -0.000123875 Jy ! Component: 1800 - total flux cleaned = -6.63221e-05 Jy ! Component: 1850 - total flux cleaned = -8.78065e-06 Jy ! Component: 1900 - total flux cleaned = 0.000104117 Jy ! Component: 1950 - total flux cleaned = 0.000178761 Jy ! Component: 2000 - total flux cleaned = 0.000307488 Jy ! Component: 2050 - total flux cleaned = 0.000289617 Jy ! Component: 2100 - total flux cleaned = 0.000397745 Jy ! Component: 2150 - total flux cleaned = 0.000504447 Jy ! Component: 2200 - total flux cleaned = 0.000504785 Jy ! Component: 2250 - total flux cleaned = 0.000609301 Jy ! Component: 2300 - total flux cleaned = 0.000643916 Jy ! Component: 2350 - total flux cleaned = 0.000763507 Jy ! Component: 2400 - total flux cleaned = 0.000780205 Jy ! Component: 2450 - total flux cleaned = 0.000863622 Jy ! Component: 2500 - total flux cleaned = 0.00086365 Jy ! Component: 2550 - total flux cleaned = 0.000945547 Jy ! Component: 2600 - total flux cleaned = 0.000977935 Jy ! Component: 2650 - total flux cleaned = 0.00104216 Jy ! Component: 2700 - total flux cleaned = 0.00104211 Jy ! Component: 2750 - total flux cleaned = 0.00112112 Jy ! Component: 2800 - total flux cleaned = 0.0012149 Jy ! Component: 2850 - total flux cleaned = 0.00119943 Jy ! Component: 2900 - total flux cleaned = 0.0012764 Jy ! Component: 2950 - total flux cleaned = 0.00123069 Jy ! Component: 3000 - total flux cleaned = 0.00132094 Jy ! Component: 3050 - total flux cleaned = 0.00132119 Jy ! Component: 3100 - total flux cleaned = 0.00139507 Jy ! Component: 3150 - total flux cleaned = 0.00136567 Jy ! Component: 3200 - total flux cleaned = 0.00148196 Jy ! Component: 3250 - total flux cleaned = 0.00145318 Jy ! Component: 3300 - total flux cleaned = 0.00151049 Jy ! Component: 3350 - total flux cleaned = 0.00153887 Jy ! Component: 3400 - total flux cleaned = 0.00155306 Jy ! Component: 3450 - total flux cleaned = 0.00160894 Jy ! Component: 3500 - total flux cleaned = 0.00163655 Jy ! Component: 3550 - total flux cleaned = 0.00169143 Jy ! Component: 3600 - total flux cleaned = 0.00177303 Jy ! Component: 3650 - total flux cleaned = 0.0018539 Jy ! Component: 3700 - total flux cleaned = 0.00190741 Jy ! Component: 3750 - total flux cleaned = 0.00188092 Jy ! Component: 3800 - total flux cleaned = 0.00190741 Jy ! Component: 3850 - total flux cleaned = 0.00193361 Jy ! Component: 3900 - total flux cleaned = 0.00202463 Jy ! Component: 3950 - total flux cleaned = 0.00202468 Jy ! Component: 4000 - total flux cleaned = 0.00206319 Jy ! Component: 4050 - total flux cleaned = 0.00215257 Jy ! Total flux subtracted in 4096 components = 0.00215246 Jy ! Clean residual min=-0.000779 max=0.000668 Jy/beam ! Clean residual mean=-0.000001 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.161304 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 340 components and 0.161304 Jy ![Exited script file: muppet] wmap "J0127-0821_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.788 x 7.377 at -3.935 degrees (North through East) ! Clean map min=-0.0016792 max=0.14434 Jy/beam ! Writing clean map to FITS file: J0127-0821_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144338 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000216942 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.450904 0.450904 0.901807 1.80361 3.60723 7.21446 14.4289 28.8578 57.7157 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.788 x 7.377 at -3.935 degrees (North through East) ! Clean map min=-0.0016792 max=0.14434 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0127-0821_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:57:23 2019