! Started logfile: J0125-2549_S_2017_07_16_pus_uvs.log on Thu May 9 10:57:13 2019 obs J0125-2549_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0125-2549_S_2017_07_16_pus_uva.fits ! AN table 1: 81 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.410151 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0125-2549 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 5980 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0125-2549_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 381 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 666 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920267Jy sigma=0.006187 ! Fit after self-cal, rms=0.893643Jy sigma=0.006041 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.29 mas, bmaj=6.574 mas, bpa=-7.287 degrees ! Estimated noise=2505.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0880828 Jy ! Component: 100 - total flux cleaned = 0.107991 Jy ! Total flux subtracted in 100 components = 0.107991 Jy ! Clean residual min=-0.008384 max=0.009421 Jy/beam ! Clean residual mean=0.000019 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 0.107991 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.107991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107079Jy sigma=0.000671 ! Fit after self-cal, rms=0.107001Jy sigma=0.000671 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=7.009 mas, bpa=-7.277 degrees ! Estimated noise=1718.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933485 Jy ! Component: 100 - total flux cleaned = 0.0139882 Jy ! Component: 150 - total flux cleaned = 0.0161895 Jy ! Component: 200 - total flux cleaned = 0.0169505 Jy ! Total flux subtracted in 200 components = 0.0169505 Jy ! Clean residual min=-0.005388 max=0.006555 Jy/beam ! Clean residual mean=0.000006 rms=0.001494 Jy/beam ! Combined flux in latest and established models = 0.124941 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.124941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106298Jy sigma=0.000665 ! Fit after self-cal, rms=0.106251Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.43 KP 1.00 ! LA 1.00* MK 0.97 NL 0.84 OV 0.96 ! PT 1.03 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.06 KP 0.96 ! LA 1.00* MK 0.94 NL 1.02 OV 0.98 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.42 KP 0.93 ! LA 1.00* MK 1.08 NL 0.98 OV 0.96 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 4. ! A total of 144 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.106251Jy sigma=0.000664 ! Fit after self-cal, rms=0.117832Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.564 mas, bmaj=6.968 mas, bpa=-5.935 degrees ! Estimated noise=1744.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103977 Jy ! Component: 100 - total flux cleaned = 0.000874567 Jy ! Component: 150 - total flux cleaned = 0.000842117 Jy ! Component: 200 - total flux cleaned = 0.000782173 Jy ! Total flux subtracted in 200 components = 0.000782173 Jy ! Clean residual min=-0.004914 max=0.004359 Jy/beam ! Clean residual mean=-0.000001 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.125723 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.125723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117783Jy sigma=0.000662 ! Fit after self-cal, rms=0.118101Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118101Jy sigma=0.000662 ! Fit after self-cal, rms=0.123399Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=6.945 mas, bpa=-5.962 degrees ! Estimated noise=1763.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159306 Jy ! Component: 100 - total flux cleaned = 0.00200081 Jy ! Component: 150 - total flux cleaned = 0.00200183 Jy ! Component: 200 - total flux cleaned = 0.00193431 Jy ! Total flux subtracted in 200 components = 0.00193431 Jy ! Clean residual min=-0.004395 max=0.003901 Jy/beam ! Clean residual mean=-0.000003 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.127658 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 21 components and 0.127658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123360Jy sigma=0.000659 ! Fit after self-cal, rms=0.123452Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108537 Jy ! Component: 100 - total flux cleaned = -1.61395e-05 Jy ! Component: 150 - total flux cleaned = -6.85051e-05 Jy ! Component: 200 - total flux cleaned = -0.000116773 Jy ! Total flux subtracted in 200 components = -0.000116773 Jy ! Clean residual min=-0.004371 max=0.003969 Jy/beam ! Clean residual mean=-0.000003 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.127541 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.127541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123438Jy sigma=0.000659 ! Fit after self-cal, rms=0.123440Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123440Jy sigma=0.000659 ! Fit after self-cal, rms=0.125130Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.551 mas, bmaj=6.939 mas, bpa=-6.05 degrees ! Estimated noise=1758.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363455 Jy ! Component: 100 - total flux cleaned = 0.00041073 Jy ! Component: 150 - total flux cleaned = 0.000437604 Jy ! Component: 200 - total flux cleaned = 0.000460401 Jy ! Total flux subtracted in 200 components = 0.000460401 Jy ! Clean residual min=-0.004013 max=0.003888 Jy/beam ! Clean residual mean=-0.000004 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.128001 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.128001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125121Jy sigma=0.000658 ! Fit after self-cal, rms=0.125137Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.873e-06 Jy ! Component: 100 - total flux cleaned = -1.75599e-05 Jy ! Component: 150 - total flux cleaned = 1.01897e-06 Jy ! Component: 200 - total flux cleaned = 9.44754e-06 Jy ! Total flux subtracted in 200 components = 9.44754e-06 Jy ! Clean residual min=-0.004037 max=0.003852 Jy/beam ! Clean residual mean=-0.000005 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.128011 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.128011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125133Jy sigma=0.000658 ! Fit after self-cal, rms=0.125134Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125134Jy sigma=0.000658 ! Fit after self-cal, rms=0.125344Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.403 mas, bmaj=14.71 mas, bpa=-3.842 degrees ! Estimated noise=2521.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000502352 Jy ! Component: 100 - total flux cleaned = 0.000487367 Jy ! Component: 150 - total flux cleaned = 0.00048668 Jy ! Component: 200 - total flux cleaned = 0.000486026 Jy ! Total flux subtracted in 200 components = 0.000486026 Jy ! Clean residual min=-0.004408 max=0.004174 Jy/beam ! Clean residual mean=-0.000007 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.128497 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 34 components and 0.128497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125347Jy sigma=0.000658 ! Fit after self-cal, rms=0.125345Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.0421e-05 Jy ! Component: 100 - total flux cleaned = -5.53745e-05 Jy ! Component: 150 - total flux cleaned = -5.52779e-05 Jy ! Component: 200 - total flux cleaned = -5.54708e-05 Jy ! Total flux subtracted in 200 components = -5.54708e-05 Jy ! Clean residual min=-0.004425 max=0.004147 Jy/beam ! Clean residual mean=-0.000007 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.128441 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 34 components and 0.128441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125348Jy sigma=0.000658 ! Fit after self-cal, rms=0.125344Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=6.934 mas, bpa=-6.081 degrees ! Estimated noise=1758.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.547 x 6.934 at -6.081 degrees (North through East) ! Clean map min=-0.0037235 max=0.11505 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.321 mas, bmaj=6.508 mas, bpa=-5.252 degrees ! Estimated noise=2598.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882562 Jy ! Component: 100 - total flux cleaned = 0.109755 Jy ! Component: 150 - total flux cleaned = 0.11912 Jy ! Component: 200 - total flux cleaned = 0.123872 Jy ! Total flux subtracted in 200 components = 0.123872 Jy ! Clean residual min=-0.006388 max=0.005943 Jy/beam ! Clean residual mean=0.000004 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 0.123872 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.123872 Jy ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=6.934 mas, bpa=-6.081 degrees ! Estimated noise=1758.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293061 Jy ! Component: 100 - total flux cleaned = 0.00373793 Jy ! Component: 150 - total flux cleaned = 0.00407546 Jy ! Component: 200 - total flux cleaned = 0.00430332 Jy ! Total flux subtracted in 200 components = 0.00430332 Jy ! Clean residual min=-0.004142 max=0.003790 Jy/beam ! Clean residual mean=-0.000004 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.128175 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.128175 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.403 mas, bmaj=14.71 mas, bpa=-3.842 degrees ! Estimated noise=2521.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016952 Jy ! Component: 100 - total flux cleaned = 0.000198014 Jy ! Component: 150 - total flux cleaned = 0.00019577 Jy ! Component: 200 - total flux cleaned = 0.00019392 Jy ! Total flux subtracted in 200 components = 0.00019392 Jy ! Clean residual min=-0.004437 max=0.004257 Jy/beam ! Clean residual mean=-0.000006 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.128369 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17373e-06 Jy ! Component: 100 - total flux cleaned = 5.25824e-08 Jy ! Component: 150 - total flux cleaned = 1.19987e-07 Jy ! Component: 200 - total flux cleaned = 1.87471e-06 Jy ! Total flux subtracted in 200 components = 1.87471e-06 Jy ! Clean residual min=-0.004439 max=0.004216 Jy/beam ! Clean residual mean=-0.000006 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.128371 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.128371 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=6.934 mas, bpa=-6.081 degrees ! Estimated noise=1758.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370856 Jy ! Component: 100 - total flux cleaned = -0.000533842 Jy ! Component: 150 - total flux cleaned = -0.00053455 Jy ! Component: 200 - total flux cleaned = -0.000535593 Jy ! Total flux subtracted in 200 components = -0.000535593 Jy ! Clean residual min=-0.004053 max=0.003819 Jy/beam ! Clean residual mean=-0.000004 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.127835 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.127835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125341Jy sigma=0.000658 ! Fit after self-cal, rms=0.125339Jy sigma=0.000658 wmodel J0125-2549_S_2017_07_16_pus_map.mod ! Writing 34 model components to file: J0125-2549_S_2017_07_16_pus_map.mod wobs J0125-2549_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0125-2549_S_2017_07_16_pus_uvs.fits wwins J0125-2549_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0125-2549_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120865 Jy ! Component: 100 - total flux cleaned = -0.00154832 Jy ! Component: 150 - total flux cleaned = -0.00205935 Jy ! Component: 200 - total flux cleaned = -0.00261323 Jy ! Component: 250 - total flux cleaned = -0.0030276 Jy ! Component: 300 - total flux cleaned = -0.0034271 Jy ! Component: 350 - total flux cleaned = -0.00375997 Jy ! Component: 400 - total flux cleaned = -0.00408287 Jy ! Component: 450 - total flux cleaned = -0.00434483 Jy ! Component: 500 - total flux cleaned = -0.00459892 Jy ! Component: 550 - total flux cleaned = -0.00484648 Jy ! Component: 600 - total flux cleaned = -0.00508836 Jy ! Component: 650 - total flux cleaned = -0.00541817 Jy ! Component: 700 - total flux cleaned = -0.00555643 Jy ! Component: 750 - total flux cleaned = -0.00573771 Jy ! Component: 800 - total flux cleaned = -0.00604792 Jy ! Component: 850 - total flux cleaned = -0.00630838 Jy ! Component: 900 - total flux cleaned = -0.00647788 Jy ! Component: 950 - total flux cleaned = -0.00672763 Jy ! Component: 1000 - total flux cleaned = -0.00684993 Jy ! Component: 1050 - total flux cleaned = -0.00705161 Jy ! Component: 1100 - total flux cleaned = -0.00721001 Jy ! Component: 1150 - total flux cleaned = -0.00744401 Jy ! Component: 1200 - total flux cleaned = -0.00767455 Jy ! Component: 1250 - total flux cleaned = -0.00778836 Jy ! Component: 1300 - total flux cleaned = -0.00812319 Jy ! Component: 1350 - total flux cleaned = -0.00830605 Jy ! Component: 1400 - total flux cleaned = -0.00855863 Jy ! Component: 1450 - total flux cleaned = -0.00870147 Jy ! Component: 1500 - total flux cleaned = -0.00884244 Jy ! Component: 1550 - total flux cleaned = -0.00915511 Jy ! Component: 1600 - total flux cleaned = -0.00922353 Jy ! Component: 1650 - total flux cleaned = -0.00946003 Jy ! Component: 1700 - total flux cleaned = -0.00962594 Jy ! Component: 1750 - total flux cleaned = -0.00969139 Jy ! Component: 1800 - total flux cleaned = -0.00988672 Jy ! Component: 1850 - total flux cleaned = -0.00995057 Jy ! Component: 1900 - total flux cleaned = -0.00995086 Jy ! Component: 1950 - total flux cleaned = -0.0100758 Jy ! Component: 2000 - total flux cleaned = -0.0101369 Jy ! Component: 2050 - total flux cleaned = -0.0102286 Jy ! Component: 2100 - total flux cleaned = -0.0102289 Jy ! Component: 2150 - total flux cleaned = -0.010318 Jy ! Component: 2200 - total flux cleaned = -0.0103768 Jy ! Component: 2250 - total flux cleaned = -0.0104061 Jy ! Component: 2300 - total flux cleaned = -0.0104062 Jy ! Component: 2350 - total flux cleaned = -0.0104059 Jy ! Component: 2400 - total flux cleaned = -0.0103779 Jy ! Component: 2450 - total flux cleaned = -0.0103229 Jy ! Component: 2500 - total flux cleaned = -0.0103777 Jy ! Component: 2550 - total flux cleaned = -0.0102694 Jy ! Component: 2600 - total flux cleaned = -0.0103233 Jy ! Component: 2650 - total flux cleaned = -0.0102967 Jy ! Component: 2700 - total flux cleaned = -0.0102966 Jy ! Component: 2750 - total flux cleaned = -0.0102708 Jy ! Component: 2800 - total flux cleaned = -0.0102707 Jy ! Component: 2850 - total flux cleaned = -0.0102451 Jy ! Component: 2900 - total flux cleaned = -0.010169 Jy ! Component: 2950 - total flux cleaned = -0.0101191 Jy ! Component: 3000 - total flux cleaned = -0.0101195 Jy ! Component: 3050 - total flux cleaned = -0.0101441 Jy ! Component: 3100 - total flux cleaned = -0.010144 Jy ! Component: 3150 - total flux cleaned = -0.0101436 Jy ! Component: 3200 - total flux cleaned = -0.0100719 Jy ! Component: 3250 - total flux cleaned = -0.0100957 Jy ! Component: 3300 - total flux cleaned = -0.0101189 Jy ! Component: 3350 - total flux cleaned = -0.0101185 Jy ! Component: 3400 - total flux cleaned = -0.0100956 Jy ! Component: 3450 - total flux cleaned = -0.0101644 Jy ! Component: 3500 - total flux cleaned = -0.0102325 Jy ! Component: 3550 - total flux cleaned = -0.0102549 Jy ! Component: 3600 - total flux cleaned = -0.0102993 Jy ! Component: 3650 - total flux cleaned = -0.0102551 Jy ! Component: 3700 - total flux cleaned = -0.0103873 Jy ! Component: 3750 - total flux cleaned = -0.0103652 Jy ! Component: 3800 - total flux cleaned = -0.0104304 Jy ! Component: 3850 - total flux cleaned = -0.0104735 Jy ! Component: 3900 - total flux cleaned = -0.0104949 Jy ! Component: 3950 - total flux cleaned = -0.0105375 Jy ! Component: 4000 - total flux cleaned = -0.010622 Jy ! Component: 4050 - total flux cleaned = -0.010622 Jy ! Total flux subtracted in 4096 components = -0.0107056 Jy ! Clean residual min=-0.001299 max=0.001212 Jy/beam ! Clean residual mean=-0.000002 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.11713 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 305 components and 0.11713 Jy ![Exited script file: muppet] wmap "J0125-2549_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.547 x 6.934 at -6.081 degrees (North through East) ! Clean map min=-0.003143 max=0.11494 Jy/beam ! Writing clean map to FITS file: J0125-2549_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11494 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000352019 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.918792 0.918792 1.83758 3.67517 7.35034 14.7007 29.4013 58.8027 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.547 x 6.934 at -6.081 degrees (North through East) ! Clean map min=-0.003143 max=0.11494 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0125-2549_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:57:17 2019