! Started logfile: J0124-3416_S_2017_04_28_pus_uvs.log on Thu May 2 16:14:52 2019 obs J0124-3416_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0124-3416_S_2017_04_28_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877295 visibilities/baseline/integration-bin. ! Found source: J0124-3416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 18160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0124-3416_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 579 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938874Jy sigma=0.189563 ! Fit after self-cal, rms=0.901192Jy sigma=0.189576 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=8.756 mas, bpa=-3.821 degrees ! Estimated noise=701.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334485 Jy ! Component: 100 - total flux cleaned = 0.0379281 Jy ! Total flux subtracted in 100 components = 0.0379281 Jy ! Clean residual min=-0.021919 max=0.017265 Jy/beam ! Clean residual mean=0.000020 rms=0.007499 Jy/beam ! Combined flux in latest and established models = 0.0379281 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0379281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174322Jy sigma=0.005243 ! Fit after self-cal, rms=0.174256Jy sigma=0.005212 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.313 mas, bmaj=11.42 mas, bpa=2.052 degrees ! Estimated noise=365.584 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136302 Jy ! Component: 100 - total flux cleaned = 0.0183975 Jy ! Component: 150 - total flux cleaned = 0.0215691 Jy ! Component: 200 - total flux cleaned = 0.0244583 Jy ! Total flux subtracted in 200 components = 0.0244583 Jy ! Clean residual min=-0.018015 max=0.016962 Jy/beam ! Clean residual mean=0.000136 rms=0.008430 Jy/beam ! Combined flux in latest and established models = 0.0623865 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.0623865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168861Jy sigma=0.004409 ! Fit after self-cal, rms=0.168416Jy sigma=0.004400 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.50 FD 0.62 HN 0.51 KP 0.69 ! LA 0.75 MK 0.89 NL 0.78 OV 0.67 ! PT 0.76 SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.52 FD 0.59 HN 0.53 KP 0.66 ! LA 0.68 MK 0.90 NL 0.89 OV 0.71 ! PT 0.76 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.50 FD 0.65 HN 0.50 KP 0.73 ! LA 0.73 MK 0.90 NL 0.77 OV 0.62 ! PT 0.71 SC 0.88 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 11.97 FD 0.70 HN 0.34 KP 1.00* ! LA 13.54 MK 1.16 NL 1.00* OV 1.00* ! PT 0.83 SC 1.00* ! ! ! Fit before self-cal, rms=0.168416Jy sigma=0.004400 ! Fit after self-cal, rms=3.179502Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.614 mas, bpa=1.396 degrees ! Estimated noise=601.833 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237957 Jy ! Component: 100 - total flux cleaned = 0.00194421 Jy ! Component: 150 - total flux cleaned = 0.00143632 Jy ! Component: 200 - total flux cleaned = 0.00110419 Jy ! Total flux subtracted in 200 components = 0.00110419 Jy ! Clean residual min=-0.004776 max=0.003345 Jy/beam ! Clean residual mean=-0.000024 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.0634907 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 17 components and 0.0634906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.179283Jy sigma=0.000669 ! Fit after self-cal, rms=3.179900Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.179900Jy sigma=0.000664 ! Fit after self-cal, rms=5.364229Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=8.69 mas, bpa=1.287 degrees ! Estimated noise=615.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164277 Jy ! Component: 100 - total flux cleaned = 0.00117826 Jy ! Component: 150 - total flux cleaned = 0.000972734 Jy ! Component: 200 - total flux cleaned = 0.000697031 Jy ! Total flux subtracted in 200 components = 0.000697031 Jy ! Clean residual min=-0.004017 max=0.002975 Jy/beam ! Clean residual mean=-0.000037 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.0641877 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0641877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.364123Jy sigma=0.000660 ! Fit after self-cal, rms=5.364114Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000311909 Jy ! Component: 100 - total flux cleaned = -0.000585285 Jy ! Component: 150 - total flux cleaned = -0.000666549 Jy ! Component: 200 - total flux cleaned = -0.000816906 Jy ! Total flux subtracted in 200 components = -0.000816906 Jy ! Clean residual min=-0.003484 max=0.002841 Jy/beam ! Clean residual mean=-0.000039 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.0633708 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.0633708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.364077Jy sigma=0.000658 ! Fit after self-cal, rms=5.364095Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.364095Jy sigma=0.000658 ! Fit after self-cal, rms=0.311010Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.277 mas, bmaj=8.602 mas, bpa=1.209 degrees ! Estimated noise=617.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217704 Jy ! Component: 100 - total flux cleaned = -0.000423509 Jy ! Component: 150 - total flux cleaned = -0.000604664 Jy ! Component: 200 - total flux cleaned = -0.000658814 Jy ! Total flux subtracted in 200 components = -0.000658814 Jy ! Clean residual min=-0.002770 max=0.002033 Jy/beam ! Clean residual mean=-0.000020 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.062712 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.062712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310989Jy sigma=0.000649 ! Fit after self-cal, rms=0.310934Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000237771 Jy ! Component: 100 - total flux cleaned = -0.000450186 Jy ! Component: 150 - total flux cleaned = -0.000498777 Jy ! Component: 200 - total flux cleaned = -0.000586083 Jy ! Total flux subtracted in 200 components = -0.000586083 Jy ! Clean residual min=-0.002461 max=0.002054 Jy/beam ! Clean residual mean=-0.000019 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0621259 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.0621259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310925Jy sigma=0.000647 ! Fit after self-cal, rms=0.310933Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310933Jy sigma=0.000647 ! Fit after self-cal, rms=0.324716Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.388 mas, bmaj=25.93 mas, bpa=8.643 degrees ! Estimated noise=729.027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247145 Jy ! Component: 100 - total flux cleaned = 9.15029e-05 Jy ! Component: 150 - total flux cleaned = -5.04206e-05 Jy ! Component: 200 - total flux cleaned = -0.000148003 Jy ! Total flux subtracted in 200 components = -0.000148003 Jy ! Clean residual min=-0.001839 max=0.001880 Jy/beam ! Clean residual mean=-0.000032 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0619779 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.0619779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324703Jy sigma=0.000646 ! Fit after self-cal, rms=0.324695Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195924 Jy ! Component: 100 - total flux cleaned = -0.000280566 Jy ! Component: 150 - total flux cleaned = -0.000384223 Jy ! Component: 200 - total flux cleaned = -0.00045444 Jy ! Total flux subtracted in 200 components = -0.00045444 Jy ! Clean residual min=-0.001638 max=0.001913 Jy/beam ! Clean residual mean=-0.000033 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0615234 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.0615234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324698Jy sigma=0.000646 ! Fit after self-cal, rms=0.324702Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=8.53 mas, bpa=1.29 degrees ! Estimated noise=625.144 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.261 x 8.53 at 1.29 degrees (North through East) ! Clean map min=-0.0019885 max=0.048817 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.627 mas, bmaj=7.088 mas, bpa=1.273 degrees ! Estimated noise=1005.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0480214 Jy ! Component: 100 - total flux cleaned = 0.0549992 Jy ! Component: 150 - total flux cleaned = 0.0567555 Jy ! Component: 200 - total flux cleaned = 0.0574484 Jy ! Total flux subtracted in 200 components = 0.0574484 Jy ! Clean residual min=-0.003366 max=0.004495 Jy/beam ! Clean residual mean=-0.000005 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.0574484 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0574484 Jy ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=8.53 mas, bpa=1.29 degrees ! Estimated noise=625.144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250862 Jy ! Component: 100 - total flux cleaned = 0.00280633 Jy ! Component: 150 - total flux cleaned = 0.00293235 Jy ! Component: 200 - total flux cleaned = 0.00293267 Jy ! Total flux subtracted in 200 components = 0.00293267 Jy ! Clean residual min=-0.001792 max=0.001957 Jy/beam ! Clean residual mean=-0.000019 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0603811 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 0.0603811 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.388 mas, bmaj=25.93 mas, bpa=8.643 degrees ! Estimated noise=729.027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340101 Jy ! Component: 100 - total flux cleaned = 0.000434643 Jy ! Component: 150 - total flux cleaned = 0.000517885 Jy ! Component: 200 - total flux cleaned = 0.000607958 Jy ! Total flux subtracted in 200 components = 0.000607958 Jy ! Clean residual min=-0.001536 max=0.001563 Jy/beam ! Clean residual mean=-0.000034 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0609891 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.86445e-05 Jy ! Component: 100 - total flux cleaned = 0.000106771 Jy ! Component: 150 - total flux cleaned = 0.000142841 Jy ! Component: 200 - total flux cleaned = 0.000176907 Jy ! Total flux subtracted in 200 components = 0.000176907 Jy ! Clean residual min=-0.001496 max=0.001520 Jy/beam ! Clean residual mean=-0.000033 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.061166 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.061166 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=8.53 mas, bpa=1.29 degrees ! Estimated noise=625.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000362787 Jy ! Component: 100 - total flux cleaned = -0.000325339 Jy ! Component: 150 - total flux cleaned = -0.000286864 Jy ! Component: 200 - total flux cleaned = -0.000287172 Jy ! Total flux subtracted in 200 components = -0.000287172 Jy ! Clean residual min=-0.001700 max=0.001777 Jy/beam ! Clean residual mean=-0.000018 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0608788 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.0608788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324682Jy sigma=0.000645 ! Fit after self-cal, rms=0.324666Jy sigma=0.000645 wmodel J0124-3416_S_2017_04_28_pus_map.mod ! Writing 58 model components to file: J0124-3416_S_2017_04_28_pus_map.mod wobs J0124-3416_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0124-3416_S_2017_04_28_pus_uvs.fits wwins J0124-3416_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0124-3416_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191304 Jy ! Component: 100 - total flux cleaned = 0.000400053 Jy ! Component: 150 - total flux cleaned = 0.00059793 Jy ! Component: 200 - total flux cleaned = 0.000733077 Jy ! Component: 250 - total flux cleaned = 0.000732719 Jy ! Component: 300 - total flux cleaned = 0.000731929 Jy ! Component: 350 - total flux cleaned = 0.000658652 Jy ! Component: 400 - total flux cleaned = 0.000611337 Jy ! Component: 450 - total flux cleaned = 0.000588361 Jy ! Component: 500 - total flux cleaned = 0.000565425 Jy ! Component: 550 - total flux cleaned = 0.00043177 Jy ! Component: 600 - total flux cleaned = 0.000367224 Jy ! Component: 650 - total flux cleaned = 0.000346316 Jy ! Component: 700 - total flux cleaned = 0.000283268 Jy ! Component: 750 - total flux cleaned = 0.000242067 Jy ! Component: 800 - total flux cleaned = 0.000160634 Jy ! Component: 850 - total flux cleaned = 8.09869e-05 Jy ! Component: 900 - total flux cleaned = 2.23715e-05 Jy ! Component: 950 - total flux cleaned = -7.40334e-05 Jy ! Component: 1000 - total flux cleaned = -0.00014928 Jy ! Component: 1050 - total flux cleaned = -0.000149651 Jy ! Component: 1100 - total flux cleaned = -0.000241473 Jy ! Component: 1150 - total flux cleaned = -0.000368193 Jy ! Component: 1200 - total flux cleaned = -0.000368112 Jy ! Component: 1250 - total flux cleaned = -0.000473755 Jy ! Component: 1300 - total flux cleaned = -0.000490877 Jy ! Component: 1350 - total flux cleaned = -0.000542209 Jy ! Component: 1400 - total flux cleaned = -0.000576202 Jy ! Component: 1450 - total flux cleaned = -0.00064326 Jy ! Component: 1500 - total flux cleaned = -0.000693207 Jy ! Component: 1550 - total flux cleaned = -0.000709617 Jy ! Component: 1600 - total flux cleaned = -0.000758316 Jy ! Component: 1650 - total flux cleaned = -0.000805897 Jy ! Component: 1700 - total flux cleaned = -0.000821637 Jy ! Component: 1750 - total flux cleaned = -0.000821646 Jy ! Component: 1800 - total flux cleaned = -0.000883 Jy ! Component: 1850 - total flux cleaned = -0.000867627 Jy ! Component: 1900 - total flux cleaned = -0.000897753 Jy ! Component: 1950 - total flux cleaned = -0.00091261 Jy ! Component: 2000 - total flux cleaned = -0.000927407 Jy ! Component: 2050 - total flux cleaned = -0.000971001 Jy ! Component: 2100 - total flux cleaned = -0.00097105 Jy ! Component: 2150 - total flux cleaned = -0.001042 Jy ! Component: 2200 - total flux cleaned = -0.00105576 Jy ! Component: 2250 - total flux cleaned = -0.0010557 Jy ! Component: 2300 - total flux cleaned = -0.00109728 Jy ! Component: 2350 - total flux cleaned = -0.00112468 Jy ! Component: 2400 - total flux cleaned = -0.00112469 Jy ! Component: 2450 - total flux cleaned = -0.00115171 Jy ! Component: 2500 - total flux cleaned = -0.00119167 Jy ! Component: 2550 - total flux cleaned = -0.00121804 Jy ! Component: 2600 - total flux cleaned = -0.00124408 Jy ! Component: 2650 - total flux cleaned = -0.00127013 Jy ! Component: 2700 - total flux cleaned = -0.00129562 Jy ! Component: 2750 - total flux cleaned = -0.00129556 Jy ! Component: 2800 - total flux cleaned = -0.00132089 Jy ! Component: 2850 - total flux cleaned = -0.00134568 Jy ! Component: 2900 - total flux cleaned = -0.00137039 Jy ! Component: 2950 - total flux cleaned = -0.0014072 Jy ! Component: 3000 - total flux cleaned = -0.00149251 Jy ! Component: 3050 - total flux cleaned = -0.00152875 Jy ! Component: 3100 - total flux cleaned = -0.00157677 Jy ! Component: 3150 - total flux cleaned = -0.00158875 Jy ! Component: 3200 - total flux cleaned = -0.00163623 Jy ! Component: 3250 - total flux cleaned = -0.00167159 Jy ! Component: 3300 - total flux cleaned = -0.00173007 Jy ! Component: 3350 - total flux cleaned = -0.00174165 Jy ! Component: 3400 - total flux cleaned = -0.00177628 Jy ! Component: 3450 - total flux cleaned = -0.0018566 Jy ! Component: 3500 - total flux cleaned = -0.00186793 Jy ! Component: 3550 - total flux cleaned = -0.00187927 Jy ! Component: 3600 - total flux cleaned = -0.00192437 Jy ! Component: 3650 - total flux cleaned = -0.00194682 Jy ! Component: 3700 - total flux cleaned = -0.00200244 Jy ! Component: 3750 - total flux cleaned = -0.00203564 Jy ! Component: 3800 - total flux cleaned = -0.00205771 Jy ! Component: 3850 - total flux cleaned = -0.00211254 Jy ! Component: 3900 - total flux cleaned = -0.0021561 Jy ! Component: 3950 - total flux cleaned = -0.00223193 Jy ! Component: 4000 - total flux cleaned = -0.0022643 Jy ! Component: 4050 - total flux cleaned = -0.00231784 Jy ! Total flux subtracted in 4096 components = -0.00233924 Jy ! Clean residual min=-0.000625 max=0.000644 Jy/beam ! Clean residual mean=-0.000005 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0585396 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 340 components and 0.0585395 Jy ![Exited script file: muppet] wmap "J0124-3416_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.261 x 8.53 at 1.29 degrees (North through East) ! Clean map min=-0.0015367 max=0.055012 Jy/beam ! Writing clean map to FITS file: J0124-3416_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0550123 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191855 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04625 1.04625 2.09249 4.18499 8.36998 16.74 33.4799 66.9598 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.261 x 8.53 at 1.29 degrees (North through East) ! Clean map min=-0.0015367 max=0.055012 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0124-3416_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:14:57 2019