! Started logfile: J0124+5618_S_2017_05_27_pus_uvs.log on Fri May 3 10:54:05 2019 obs J0124+5618_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0124+5618_S_2017_05_27_pus_uva.fits ! AN table 1: 174 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97765 visibilities/baseline/integration-bin. ! Found source: J0124+5618 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 30620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0124+5618_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 893 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.873763Jy sigma=0.026275 ! Fit after self-cal, rms=0.857156Jy sigma=0.026216 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=4.144 mas, bpa=-13.66 degrees ! Estimated noise=734.206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0902662 Jy ! Component: 100 - total flux cleaned = 0.120842 Jy ! Total flux subtracted in 100 components = 0.120842 Jy ! Clean residual min=-0.014184 max=0.023253 Jy/beam ! Clean residual mean=0.000004 rms=0.004627 Jy/beam ! Combined flux in latest and established models = 0.120842 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.120842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096702Jy sigma=0.002718 ! Fit after self-cal, rms=0.096609Jy sigma=0.002717 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=5.196 mas, bpa=-11.91 degrees ! Estimated noise=392.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115148 Jy ! Component: 100 - total flux cleaned = 0.0141227 Jy ! Component: 150 - total flux cleaned = 0.014752 Jy ! Component: 200 - total flux cleaned = 0.0147507 Jy ! Total flux subtracted in 200 components = 0.0147507 Jy ! Clean residual min=-0.017791 max=0.029794 Jy/beam ! Clean residual mean=-0.000011 rms=0.006148 Jy/beam ! Combined flux in latest and established models = 0.135593 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.135593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092050Jy sigma=0.002926 ! Fit after self-cal, rms=0.092020Jy sigma=0.002926 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.79 HN 0.91 KP 0.85 ! LA 0.85 MK 0.99 NL 0.83 OV 0.90 ! PT 0.89 SC 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 19.62 FD 0.84 HN 1.01 KP 0.83 ! LA 0.81 MK 0.98 NL 0.94 OV 0.88 ! PT 0.87 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.85 HN 0.96 KP 0.84 ! LA 0.84 MK 0.97 NL 0.94 OV 0.82 ! PT 0.84 SC 0.92 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 1.00 KP 1.00* ! LA 0.90 MK 1.02 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.092020Jy sigma=0.002926 ! Fit after self-cal, rms=0.675865Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.904 mas, bmaj=5.159 mas, bpa=-3.091 degrees ! Estimated noise=414.231 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00864539 Jy ! Component: 100 - total flux cleaned = 0.0114902 Jy ! Component: 150 - total flux cleaned = 0.013071 Jy ! Component: 200 - total flux cleaned = 0.013659 Jy ! Total flux subtracted in 200 components = 0.013659 Jy ! Clean residual min=-0.005136 max=0.006304 Jy/beam ! Clean residual mean=0.000007 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.149252 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 53 components and 0.149252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.674674Jy sigma=0.000759 ! Fit after self-cal, rms=0.674861Jy sigma=0.000749 ! Inverting map ! Added new window around map position (-22.5, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00640455 Jy ! Component: 100 - total flux cleaned = 0.0102472 Jy ! Component: 150 - total flux cleaned = 0.0115879 Jy ! Component: 200 - total flux cleaned = 0.0121085 Jy ! Total flux subtracted in 200 components = 0.0121085 Jy ! Clean residual min=-0.004343 max=0.003875 Jy/beam ! Clean residual mean=0.000013 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.16136 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 83 components and 0.16136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.674384Jy sigma=0.000743 ! Fit after self-cal, rms=0.674369Jy sigma=0.000743 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.674369Jy sigma=0.000743 ! Fit after self-cal, rms=0.306401Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.842 mas, bmaj=5.102 mas, bpa=-6.707 degrees ! Estimated noise=407.556 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359728 Jy ! Component: 100 - total flux cleaned = 0.00584877 Jy ! Component: 150 - total flux cleaned = 0.0075097 Jy ! Component: 200 - total flux cleaned = 0.00841759 Jy ! Total flux subtracted in 200 components = 0.00841759 Jy ! Clean residual min=-0.002067 max=0.001847 Jy/beam ! Clean residual mean=0.000010 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.169778 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 0.169778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306190Jy sigma=0.000681 ! Fit after self-cal, rms=0.306174Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144969 Jy ! Component: 100 - total flux cleaned = 0.00231693 Jy ! Component: 150 - total flux cleaned = 0.00274652 Jy ! Component: 200 - total flux cleaned = 0.00293497 Jy ! Total flux subtracted in 200 components = 0.00293497 Jy ! Clean residual min=-0.001932 max=0.001864 Jy/beam ! Clean residual mean=0.000010 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.172713 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 127 components and 0.172713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306106Jy sigma=0.000680 ! Fit after self-cal, rms=0.306106Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306106Jy sigma=0.000680 ! Fit after self-cal, rms=0.313173Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.824 mas, bmaj=5.086 mas, bpa=-6.937 degrees ! Estimated noise=409.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186473 Jy ! Component: 100 - total flux cleaned = 0.0030301 Jy ! Component: 150 - total flux cleaned = 0.00390802 Jy ! Component: 200 - total flux cleaned = 0.00447855 Jy ! Total flux subtracted in 200 components = 0.00447855 Jy ! Clean residual min=-0.001876 max=0.001686 Jy/beam ! Clean residual mean=0.000010 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.177191 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 145 components and 0.177191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313039Jy sigma=0.000679 ! Fit after self-cal, rms=0.313037Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676629 Jy ! Component: 100 - total flux cleaned = 0.000955429 Jy ! Component: 150 - total flux cleaned = 0.00109253 Jy ! Component: 200 - total flux cleaned = 0.00111404 Jy ! Total flux subtracted in 200 components = 0.00111404 Jy ! Clean residual min=-0.001803 max=0.001667 Jy/beam ! Clean residual mean=0.000010 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.178305 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 155 components and 0.178305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313002Jy sigma=0.000678 ! Fit after self-cal, rms=0.313003Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313003Jy sigma=0.000678 ! Fit after self-cal, rms=0.317716Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.2 mas, bmaj=8.828 mas, bpa=0.5156 degrees ! Estimated noise=506.957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174297 Jy ! Component: 100 - total flux cleaned = 0.00256981 Jy ! Component: 150 - total flux cleaned = 0.00283789 Jy ! Component: 200 - total flux cleaned = 0.00300074 Jy ! Total flux subtracted in 200 components = 0.00300074 Jy ! Clean residual min=-0.002163 max=0.002050 Jy/beam ! Clean residual mean=0.000021 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.181306 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 183 components and 0.181306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317592Jy sigma=0.000678 ! Fit after self-cal, rms=0.317592Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322083 Jy ! Component: 100 - total flux cleaned = 0.000415603 Jy ! Component: 150 - total flux cleaned = 0.000415817 Jy ! Component: 200 - total flux cleaned = 0.000401199 Jy ! Total flux subtracted in 200 components = 0.000401199 Jy ! Clean residual min=-0.002100 max=0.001986 Jy/beam ! Clean residual mean=0.000021 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.181707 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 200 components and 0.181707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317567Jy sigma=0.000678 ! Fit after self-cal, rms=0.317568Jy sigma=0.000678 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=5.07 mas, bpa=-7.058 degrees ! Estimated noise=412.202 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 5.07 at -7.058 degrees (North through East) ! Clean map min=-0.0016792 max=0.11734 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=3.982 mas, bpa=-12.04 degrees ! Estimated noise=722.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0893436 Jy ! Component: 100 - total flux cleaned = 0.11947 Jy ! Component: 150 - total flux cleaned = 0.13408 Jy ! Component: 200 - total flux cleaned = 0.143518 Jy ! Total flux subtracted in 200 components = 0.143518 Jy ! Clean residual min=-0.003185 max=0.005070 Jy/beam ! Clean residual mean=0.000003 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.143518 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.143518 Jy ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=5.07 mas, bpa=-7.058 degrees ! Estimated noise=412.202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00910673 Jy ! Component: 100 - total flux cleaned = 0.0156472 Jy ! Component: 150 - total flux cleaned = 0.0206548 Jy ! Component: 200 - total flux cleaned = 0.0245676 Jy ! Total flux subtracted in 200 components = 0.0245676 Jy ! Clean residual min=-0.002229 max=0.002334 Jy/beam ! Clean residual mean=0.000005 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.168086 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 73 components and 0.168086 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.2 mas, bmaj=8.828 mas, bpa=0.5156 degrees ! Estimated noise=506.957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499545 Jy ! Component: 100 - total flux cleaned = 0.0082065 Jy ! Component: 150 - total flux cleaned = 0.010125 Jy ! Component: 200 - total flux cleaned = 0.0110284 Jy ! Total flux subtracted in 200 components = 0.0110284 Jy ! Clean residual min=-0.002009 max=0.002225 Jy/beam ! Clean residual mean=0.000019 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.179114 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00078439 Jy ! Component: 100 - total flux cleaned = 0.00137354 Jy ! Component: 150 - total flux cleaned = 0.0018569 Jy ! Component: 200 - total flux cleaned = 0.00213952 Jy ! Total flux subtracted in 200 components = 0.00213952 Jy ! Clean residual min=-0.002098 max=0.002020 Jy/beam ! Clean residual mean=0.000021 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.181254 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 143 components and 0.181254 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=5.07 mas, bpa=-7.058 degrees ! Estimated noise=412.202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587726 Jy ! Component: 100 - total flux cleaned = 0.000800118 Jy ! Component: 150 - total flux cleaned = 0.000923895 Jy ! Component: 200 - total flux cleaned = 0.00103539 Jy ! Total flux subtracted in 200 components = 0.00103539 Jy ! Clean residual min=-0.001719 max=0.001656 Jy/beam ! Clean residual mean=0.000010 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.182289 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 160 components and 0.182289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317579Jy sigma=0.000678 ! Fit after self-cal, rms=0.317584Jy sigma=0.000678 wmodel J0124+5618_S_2017_05_27_pus_map.mod ! Writing 160 model components to file: J0124+5618_S_2017_05_27_pus_map.mod wobs J0124+5618_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0124+5618_S_2017_05_27_pus_uvs.fits wwins J0124+5618_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J0124+5618_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000466837 Jy ! Component: 100 - total flux cleaned = -0.000694209 Jy ! Component: 150 - total flux cleaned = -0.000773763 Jy ! Component: 200 - total flux cleaned = -0.000824598 Jy ! Component: 250 - total flux cleaned = -0.000874814 Jy ! Component: 300 - total flux cleaned = -0.000947607 Jy ! Component: 350 - total flux cleaned = -0.000922947 Jy ! Component: 400 - total flux cleaned = -0.000969441 Jy ! Component: 450 - total flux cleaned = -0.000969505 Jy ! Component: 500 - total flux cleaned = -0.000969841 Jy ! Component: 550 - total flux cleaned = -0.000969896 Jy ! Component: 600 - total flux cleaned = -0.000948972 Jy ! Component: 650 - total flux cleaned = -0.000991579 Jy ! Component: 700 - total flux cleaned = -0.000991761 Jy ! Component: 750 - total flux cleaned = -0.00101227 Jy ! Component: 800 - total flux cleaned = -0.00103234 Jy ! Component: 850 - total flux cleaned = -0.000992494 Jy ! Component: 900 - total flux cleaned = -0.00103166 Jy ! Component: 950 - total flux cleaned = -0.00103165 Jy ! Component: 1000 - total flux cleaned = -0.00101247 Jy ! Component: 1050 - total flux cleaned = -0.00110708 Jy ! Component: 1100 - total flux cleaned = -0.00110693 Jy ! Component: 1150 - total flux cleaned = -0.00110677 Jy ! Component: 1200 - total flux cleaned = -0.00110648 Jy ! Component: 1250 - total flux cleaned = -0.00110655 Jy ! Component: 1300 - total flux cleaned = -0.00114226 Jy ! Component: 1350 - total flux cleaned = -0.00114208 Jy ! Component: 1400 - total flux cleaned = -0.00115925 Jy ! Component: 1450 - total flux cleaned = -0.00114201 Jy ! Component: 1500 - total flux cleaned = -0.00119255 Jy ! Component: 1550 - total flux cleaned = -0.00109185 Jy ! Component: 1600 - total flux cleaned = -0.00105883 Jy ! Component: 1650 - total flux cleaned = -0.00102585 Jy ! Component: 1700 - total flux cleaned = -0.000977307 Jy ! Component: 1750 - total flux cleaned = -0.00092917 Jy ! Component: 1800 - total flux cleaned = -0.000961024 Jy ! Component: 1850 - total flux cleaned = -0.000898173 Jy ! Component: 1900 - total flux cleaned = -0.000851751 Jy ! Component: 1950 - total flux cleaned = -0.000836141 Jy ! Component: 2000 - total flux cleaned = -0.000820811 Jy ! Component: 2050 - total flux cleaned = -0.000775553 Jy ! Component: 2100 - total flux cleaned = -0.000820694 Jy ! Component: 2150 - total flux cleaned = -0.000791195 Jy ! Component: 2200 - total flux cleaned = -0.000776538 Jy ! Component: 2250 - total flux cleaned = -0.000747449 Jy ! Component: 2300 - total flux cleaned = -0.000732971 Jy ! Component: 2350 - total flux cleaned = -0.000718426 Jy ! Component: 2400 - total flux cleaned = -0.000647304 Jy ! Component: 2450 - total flux cleaned = -0.000619209 Jy ! Component: 2500 - total flux cleaned = -0.000591166 Jy ! Component: 2550 - total flux cleaned = -0.000591248 Jy ! Component: 2600 - total flux cleaned = -0.000563765 Jy ! Component: 2650 - total flux cleaned = -0.000536258 Jy ! Component: 2700 - total flux cleaned = -0.000481984 Jy ! Component: 2750 - total flux cleaned = -0.000441854 Jy ! Component: 2800 - total flux cleaned = -0.000441982 Jy ! Component: 2850 - total flux cleaned = -0.000388998 Jy ! Component: 2900 - total flux cleaned = -0.000389098 Jy ! Component: 2950 - total flux cleaned = -0.000363068 Jy ! Component: 3000 - total flux cleaned = -0.000350008 Jy ! Component: 3050 - total flux cleaned = -0.000337088 Jy ! Component: 3100 - total flux cleaned = -0.000248157 Jy ! Component: 3150 - total flux cleaned = -0.000248036 Jy ! Component: 3200 - total flux cleaned = -0.000185492 Jy ! Component: 3250 - total flux cleaned = -0.000173156 Jy ! Component: 3300 - total flux cleaned = -0.000160776 Jy ! Component: 3350 - total flux cleaned = -7.52212e-05 Jy ! Component: 3400 - total flux cleaned = -9.95687e-05 Jy ! Component: 3450 - total flux cleaned = -5.13274e-05 Jy ! Component: 3500 - total flux cleaned = -8.74004e-05 Jy ! Component: 3550 - total flux cleaned = -2.78639e-05 Jy ! Component: 3600 - total flux cleaned = -1.60844e-05 Jy ! Component: 3650 - total flux cleaned = 7.22896e-06 Jy ! Component: 3700 - total flux cleaned = -1.5978e-05 Jy ! Component: 3750 - total flux cleaned = 1.86261e-05 Jy ! Component: 3800 - total flux cleaned = 4.13655e-05 Jy ! Component: 3850 - total flux cleaned = 5.27417e-05 Jy ! Component: 3900 - total flux cleaned = 7.53105e-05 Jy ! Component: 3950 - total flux cleaned = 5.2832e-05 Jy ! Component: 4000 - total flux cleaned = 9.72105e-05 Jy ! Component: 4050 - total flux cleaned = 0.000130382 Jy ! Total flux subtracted in 4096 components = 0.000130417 Jy ! Clean residual min=-0.000664 max=0.000679 Jy/beam ! Clean residual mean=0.000005 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.182419 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 467 components and 0.182419 Jy ![Exited script file: muppet] wmap "J0124+5618_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 5.07 at -7.058 degrees (North through East) ! Clean map min=-0.001393 max=0.11709 Jy/beam ! Writing clean map to FITS file: J0124+5618_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117087 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201801 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.517054 0.517054 1.03411 2.06821 4.13643 8.27286 16.5457 33.0914 66.1829 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.813 x 5.07 at -7.058 degrees (North through East) ! Clean map min=-0.001393 max=0.11709 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0124+5618_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:54:11 2019