! Started logfile: J0122-0421_S_2017_07_09_pus_uvs.log on Wed May 8 14:37:38 2019 obs J0122-0421_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0122-0421_S_2017_07_09_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96892 visibilities/baseline/integration-bin. ! Found source: J0122-0421 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 24940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0122-0421_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 779 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.840806Jy sigma=0.007531 ! Fit after self-cal, rms=0.824952Jy sigma=0.007398 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=6.819 mas, bpa=-5.017 degrees ! Estimated noise=949.973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129198 Jy ! Component: 100 - total flux cleaned = 0.198463 Jy ! Total flux subtracted in 100 components = 0.198463 Jy ! Clean residual min=-0.016266 max=0.062475 Jy/beam ! Clean residual mean=0.000064 rms=0.005290 Jy/beam ! Combined flux in latest and established models = 0.198463 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.198463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152969Jy sigma=0.001373 ! Fit after self-cal, rms=0.150662Jy sigma=0.001355 ! Inverting map ! Added new window around map position (4, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573385 Jy ! Component: 100 - total flux cleaned = 0.0915053 Jy ! Total flux subtracted in 100 components = 0.0915053 Jy ! Clean residual min=-0.010957 max=0.030153 Jy/beam ! Clean residual mean=0.000046 rms=0.003074 Jy/beam ! Combined flux in latest and established models = 0.289968 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 34 components and 0.289968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112574Jy sigma=0.000997 ! Fit after self-cal, rms=0.110829Jy sigma=0.000982 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272068 Jy ! Component: 100 - total flux cleaned = 0.0443513 Jy ! Total flux subtracted in 100 components = 0.0443513 Jy ! Clean residual min=-0.008294 max=0.016502 Jy/beam ! Clean residual mean=0.000037 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 0.334319 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.334319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098742Jy sigma=0.000868 ! Fit after self-cal, rms=0.098387Jy sigma=0.000865 ! Inverting map ! Added new window around map position (-3.5, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148159 Jy ! Component: 100 - total flux cleaned = 0.0252441 Jy ! Total flux subtracted in 100 components = 0.0252441 Jy ! Clean residual min=-0.007417 max=0.008818 Jy/beam ! Clean residual mean=0.000032 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 0.359563 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.359563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094099Jy sigma=0.000824 ! Fit after self-cal, rms=0.094074Jy sigma=0.000824 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=8.034 mas, bpa=-4.387 degrees ! Estimated noise=577.885 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014797 Jy ! Component: 100 - total flux cleaned = 0.0239105 Jy ! Component: 150 - total flux cleaned = 0.0299372 Jy ! Component: 200 - total flux cleaned = 0.0341298 Jy ! Total flux subtracted in 200 components = 0.0341298 Jy ! Clean residual min=-0.009268 max=0.017951 Jy/beam ! Clean residual mean=0.000083 rms=0.003214 Jy/beam ! Combined flux in latest and established models = 0.393693 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 87 components and 0.393693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091478Jy sigma=0.000800 ! Fit after self-cal, rms=0.091454Jy sigma=0.000800 ! Inverting map ! Added new window around map position (127.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188987 Jy ! Component: 100 - total flux cleaned = 0.0294053 Jy ! Component: 150 - total flux cleaned = 0.0363398 Jy ! Component: 200 - total flux cleaned = 0.0411738 Jy ! Total flux subtracted in 200 components = 0.0411738 Jy ! Clean residual min=-0.007546 max=0.010137 Jy/beam ! Clean residual mean=0.000065 rms=0.002478 Jy/beam ! Combined flux in latest and established models = 0.434867 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 144 components and 0.434867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087491Jy sigma=0.000760 ! Fit after self-cal, rms=0.087017Jy sigma=0.000756 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.99 KP 1.03 ! LA 0.94 MK 1.30 NL 0.94 OV 1.04 ! PT 0.97 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.02 HN 1.04 KP 0.99 ! LA 0.92 MK 1.00 NL 1.11 OV 1.05 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.02 HN 1.01 KP 0.98 ! LA 0.98 MK 1.13 NL 1.06 OV 0.99 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.97 KP 1.00* ! LA 0.91 MK 0.89 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.087017Jy sigma=0.000756 ! Fit after self-cal, rms=0.085539Jy sigma=0.000735 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=8.023 mas, bpa=-2.988 degrees ! Estimated noise=581.515 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00530639 Jy ! Component: 100 - total flux cleaned = 0.00738175 Jy ! Component: 150 - total flux cleaned = 0.00872364 Jy ! Component: 200 - total flux cleaned = 0.00958942 Jy ! Total flux subtracted in 200 components = 0.00958942 Jy ! Clean residual min=-0.005586 max=0.008386 Jy/beam ! Clean residual mean=0.000030 rms=0.001865 Jy/beam ! Combined flux in latest and established models = 0.444456 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 162 components and 0.444456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085065Jy sigma=0.000730 ! Fit after self-cal, rms=0.085017Jy sigma=0.000729 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085017Jy sigma=0.000729 ! Fit after self-cal, rms=0.084252Jy sigma=0.000716 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=8.057 mas, bpa=-3.426 degrees ! Estimated noise=578.784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854748 Jy ! Component: 100 - total flux cleaned = 0.00144853 Jy ! Component: 150 - total flux cleaned = 0.00180025 Jy ! Component: 200 - total flux cleaned = 0.0021059 Jy ! Total flux subtracted in 200 components = 0.0021059 Jy ! Clean residual min=-0.004805 max=0.008371 Jy/beam ! Clean residual mean=0.000026 rms=0.001646 Jy/beam ! Combined flux in latest and established models = 0.446562 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 171 components and 0.446562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084108Jy sigma=0.000715 ! Fit after self-cal, rms=0.084116Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701306 Jy ! Component: 100 - total flux cleaned = 0.00782838 Jy ! Component: 150 - total flux cleaned = 0.00821321 Jy ! Component: 200 - total flux cleaned = 0.00863602 Jy ! Total flux subtracted in 200 components = 0.00863602 Jy ! Clean residual min=-0.004448 max=0.006389 Jy/beam ! Clean residual mean=0.000019 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.455198 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 194 components and 0.455198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083531Jy sigma=0.000709 ! Fit after self-cal, rms=0.083456Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083456Jy sigma=0.000708 ! Fit after self-cal, rms=0.083312Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=8.05 mas, bpa=-3.674 degrees ! Estimated noise=574.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251371 Jy ! Component: 100 - total flux cleaned = 0.00333184 Jy ! Component: 150 - total flux cleaned = 0.00353802 Jy ! Component: 200 - total flux cleaned = 0.00372491 Jy ! Total flux subtracted in 200 components = 0.00372491 Jy ! Clean residual min=-0.004514 max=0.006657 Jy/beam ! Clean residual mean=0.000021 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.458923 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 212 components and 0.458923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083162Jy sigma=0.000706 ! Fit after self-cal, rms=0.083149Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (93.5, 61.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00633242 Jy ! Component: 100 - total flux cleaned = 0.00985287 Jy ! Component: 150 - total flux cleaned = 0.0117315 Jy ! Component: 200 - total flux cleaned = 0.0130853 Jy ! Total flux subtracted in 200 components = 0.0130853 Jy ! Clean residual min=-0.003854 max=0.004513 Jy/beam ! Clean residual mean=0.000012 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.472009 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 245 components and 0.472008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082672Jy sigma=0.000700 ! Fit after self-cal, rms=0.082643Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082643Jy sigma=0.000700 ! Fit after self-cal, rms=0.082227Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.518 mas, bmaj=13.3 mas, bpa=-4.489 degrees ! Estimated noise=726.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504749 Jy ! Component: 100 - total flux cleaned = 0.00764938 Jy ! Component: 150 - total flux cleaned = 0.00814803 Jy ! Component: 200 - total flux cleaned = 0.00849351 Jy ! Total flux subtracted in 200 components = 0.00849351 Jy ! Clean residual min=-0.006050 max=0.007435 Jy/beam ! Clean residual mean=0.000024 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 0.480502 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 272 components and 0.480502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082111Jy sigma=0.000697 ! Fit after self-cal, rms=0.082096Jy sigma=0.000697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118483 Jy ! Component: 100 - total flux cleaned = 0.00134666 Jy ! Component: 150 - total flux cleaned = 0.00149179 Jy ! Component: 200 - total flux cleaned = 0.00155985 Jy ! Total flux subtracted in 200 components = 0.00155985 Jy ! Clean residual min=-0.005777 max=0.007316 Jy/beam ! Clean residual mean=0.000019 rms=0.002031 Jy/beam ! Combined flux in latest and established models = 0.482062 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 287 components and 0.482062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082084Jy sigma=0.000697 ! Fit after self-cal, rms=0.082075Jy sigma=0.000697 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.044 mas, bpa=-3.738 degrees ! Estimated noise=570.978 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.193 x 8.044 at -3.738 degrees (North through East) ! Clean map min=-0.0056803 max=0.1672 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.635 mas, bmaj=6.814 mas, bpa=-4.387 degrees ! Estimated noise=938.044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131891 Jy ! Component: 100 - total flux cleaned = 0.210077 Jy ! Component: 150 - total flux cleaned = 0.260754 Jy ! Component: 200 - total flux cleaned = 0.294618 Jy ! Total flux subtracted in 200 components = 0.294618 Jy ! Clean residual min=-0.008983 max=0.018635 Jy/beam ! Clean residual mean=0.000044 rms=0.002639 Jy/beam ! Combined flux in latest and established models = 0.294618 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.294618 Jy ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.044 mas, bpa=-3.738 degrees ! Estimated noise=570.978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381782 Jy ! Component: 100 - total flux cleaned = 0.0631433 Jy ! Component: 150 - total flux cleaned = 0.0825315 Jy ! Component: 200 - total flux cleaned = 0.0978974 Jy ! Total flux subtracted in 200 components = 0.0978974 Jy ! Clean residual min=-0.007310 max=0.010062 Jy/beam ! Clean residual mean=0.000074 rms=0.002618 Jy/beam ! Combined flux in latest and established models = 0.392516 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 94 components and 0.392516 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.518 mas, bmaj=13.3 mas, bpa=-4.489 degrees ! Estimated noise=726.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023518 Jy ! Component: 100 - total flux cleaned = 0.0398545 Jy ! Component: 150 - total flux cleaned = 0.0519378 Jy ! Component: 200 - total flux cleaned = 0.0611681 Jy ! Total flux subtracted in 200 components = 0.0611681 Jy ! Clean residual min=-0.008296 max=0.007685 Jy/beam ! Clean residual mean=0.000071 rms=0.002704 Jy/beam ! Combined flux in latest and established models = 0.453684 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719793 Jy ! Component: 100 - total flux cleaned = 0.0128699 Jy ! Component: 150 - total flux cleaned = 0.0173754 Jy ! Component: 200 - total flux cleaned = 0.0206001 Jy ! Total flux subtracted in 200 components = 0.0206001 Jy ! Clean residual min=-0.007303 max=0.007040 Jy/beam ! Clean residual mean=0.000046 rms=0.002217 Jy/beam ! Combined flux in latest and established models = 0.474284 Jy ! Adding 140 model components to the UV plane model. ! The established model now contains 210 components and 0.474284 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.044 mas, bpa=-3.738 degrees ! Estimated noise=570.978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000980564 Jy ! Component: 100 - total flux cleaned = 0.00158388 Jy ! Component: 150 - total flux cleaned = 0.0022351 Jy ! Component: 200 - total flux cleaned = 0.00280483 Jy ! Total flux subtracted in 200 components = 0.00280483 Jy ! Clean residual min=-0.003760 max=0.004608 Jy/beam ! Clean residual mean=0.000012 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.477089 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 233 components and 0.477089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082420Jy sigma=0.000700 ! Fit after self-cal, rms=0.082336Jy sigma=0.000699 wmodel J0122-0421_S_2017_07_09_pus_map.mod ! Writing 233 model components to file: J0122-0421_S_2017_07_09_pus_map.mod wobs J0122-0421_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0122-0421_S_2017_07_09_pus_uvs.fits wwins J0122-0421_S_2017_07_09_pus_map.win ! wwins: Wrote 6 windows to J0122-0421_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200664 Jy ! Component: 100 - total flux cleaned = 0.00376381 Jy ! Component: 150 - total flux cleaned = 0.00459646 Jy ! Component: 200 - total flux cleaned = 0.00546134 Jy ! Component: 250 - total flux cleaned = 0.00590896 Jy ! Component: 300 - total flux cleaned = 0.00634241 Jy ! Component: 350 - total flux cleaned = 0.0068239 Jy ! Component: 400 - total flux cleaned = 0.00723452 Jy ! Component: 450 - total flux cleaned = 0.0076936 Jy ! Component: 500 - total flux cleaned = 0.00808576 Jy ! Component: 550 - total flux cleaned = 0.00852373 Jy ! Component: 600 - total flux cleaned = 0.00879106 Jy ! Component: 650 - total flux cleaned = 0.00915906 Jy ! Component: 700 - total flux cleaned = 0.00946763 Jy ! Component: 750 - total flux cleaned = 0.00977099 Jy ! Component: 800 - total flux cleaned = 0.0101167 Jy ! Component: 850 - total flux cleaned = 0.0104572 Jy ! Component: 900 - total flux cleaned = 0.0107429 Jy ! Component: 950 - total flux cleaned = 0.0111163 Jy ! Component: 1000 - total flux cleaned = 0.0113922 Jy ! Component: 1050 - total flux cleaned = 0.0117091 Jy ! Component: 1100 - total flux cleaned = 0.0120652 Jy ! Component: 1150 - total flux cleaned = 0.0122404 Jy ! Component: 1200 - total flux cleaned = 0.0124145 Jy ! Component: 1250 - total flux cleaned = 0.0128401 Jy ! Component: 1300 - total flux cleaned = 0.0130088 Jy ! Component: 1350 - total flux cleaned = 0.013258 Jy ! Component: 1400 - total flux cleaned = 0.0137065 Jy ! Component: 1450 - total flux cleaned = 0.0138664 Jy ! Component: 1500 - total flux cleaned = 0.0139855 Jy ! Component: 1550 - total flux cleaned = 0.0142211 Jy ! Component: 1600 - total flux cleaned = 0.0144921 Jy ! Component: 1650 - total flux cleaned = 0.0148737 Jy ! Component: 1700 - total flux cleaned = 0.0150621 Jy ! Component: 1750 - total flux cleaned = 0.0152483 Jy ! Component: 1800 - total flux cleaned = 0.0156161 Jy ! Component: 1850 - total flux cleaned = 0.0157251 Jy ! Component: 1900 - total flux cleaned = 0.0161924 Jy ! Component: 1950 - total flux cleaned = 0.0162988 Jy ! Component: 2000 - total flux cleaned = 0.0166154 Jy ! Component: 2050 - total flux cleaned = 0.0168931 Jy ! Component: 2100 - total flux cleaned = 0.0172358 Jy ! Component: 2150 - total flux cleaned = 0.0174051 Jy ! Component: 2200 - total flux cleaned = 0.0176066 Jy ! Component: 2250 - total flux cleaned = 0.017938 Jy ! Component: 2300 - total flux cleaned = 0.0181676 Jy ! Component: 2350 - total flux cleaned = 0.018492 Jy ! Component: 2400 - total flux cleaned = 0.018749 Jy ! Component: 2450 - total flux cleaned = 0.0190665 Jy ! Component: 2500 - total flux cleaned = 0.019287 Jy ! Component: 2550 - total flux cleaned = 0.0194743 Jy ! Component: 2600 - total flux cleaned = 0.0197525 Jy ! Component: 2650 - total flux cleaned = 0.0200893 Jy ! Component: 2700 - total flux cleaned = 0.0202712 Jy ! Component: 2750 - total flux cleaned = 0.0204815 Jy ! Component: 2800 - total flux cleaned = 0.0206304 Jy ! Component: 2850 - total flux cleaned = 0.0209257 Jy ! Component: 2900 - total flux cleaned = 0.0210135 Jy ! Component: 2950 - total flux cleaned = 0.0213322 Jy ! Component: 3000 - total flux cleaned = 0.0214751 Jy ! Component: 3050 - total flux cleaned = 0.0216173 Jy ! Component: 3100 - total flux cleaned = 0.0217581 Jy ! Component: 3150 - total flux cleaned = 0.0218136 Jy ! Component: 3200 - total flux cleaned = 0.021952 Jy ! Component: 3250 - total flux cleaned = 0.0222258 Jy ! Component: 3300 - total flux cleaned = 0.0222528 Jy ! Component: 3350 - total flux cleaned = 0.0224145 Jy ! Component: 3400 - total flux cleaned = 0.022468 Jy ! Component: 3450 - total flux cleaned = 0.0226004 Jy ! Component: 3500 - total flux cleaned = 0.0227581 Jy ! Component: 3550 - total flux cleaned = 0.022966 Jy ! Component: 3600 - total flux cleaned = 0.022889 Jy ! Component: 3650 - total flux cleaned = 0.0230428 Jy ! Component: 3700 - total flux cleaned = 0.023145 Jy ! Component: 3750 - total flux cleaned = 0.0231953 Jy ! Component: 3800 - total flux cleaned = 0.0232705 Jy ! Component: 3850 - total flux cleaned = 0.0234442 Jy ! Component: 3900 - total flux cleaned = 0.023469 Jy ! Component: 3950 - total flux cleaned = 0.0235424 Jy ! Component: 4000 - total flux cleaned = 0.0237123 Jy ! Component: 4050 - total flux cleaned = 0.0237605 Jy ! Total flux subtracted in 4096 components = 0.0237367 Jy ! Clean residual min=-0.001470 max=0.001249 Jy/beam ! Clean residual mean=0.000004 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.500826 Jy keep ! Adding 397 model components to the UV plane model. ! The established model now contains 630 components and 0.500826 Jy ![Exited script file: muppet] wmap "J0122-0421_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.193 x 8.044 at -3.738 degrees (North through East) ! Clean map min=-0.0030357 max=0.16753 Jy/beam ! Writing clean map to FITS file: J0122-0421_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.167529 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000479247 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.858205 0.858205 1.71641 3.43282 6.86564 13.7313 27.4626 54.9251 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.167 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.193 x 8.044 at -3.738 degrees (North through East) ! Clean map min=-0.0030357 max=0.16753 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0122-0421_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:37:43 2019