! Started logfile: J0121-2806_S_2017_07_16_pus_uvs.log on Thu May 9 10:57:08 2019 obs J0121-2806_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0121-2806_S_2017_07_16_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.594667 visibilities/baseline/integration-bin. ! Found source: J0121-2806 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 8028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0121-2806_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 543 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894211Jy sigma=0.005854 ! Fit after self-cal, rms=0.873200Jy sigma=0.005724 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.268 mas, bmaj=6.74 mas, bpa=-8.052 degrees ! Estimated noise=1949.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103455 Jy ! Component: 100 - total flux cleaned = 0.126051 Jy ! Total flux subtracted in 100 components = 0.126051 Jy ! Clean residual min=-0.008950 max=0.010939 Jy/beam ! Clean residual mean=0.000024 rms=0.002449 Jy/beam ! Combined flux in latest and established models = 0.126051 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.126051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112358Jy sigma=0.000675 ! Fit after self-cal, rms=0.112341Jy sigma=0.000675 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=6.997 mas, bpa=-7.273 degrees ! Estimated noise=1531.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102224 Jy ! Component: 100 - total flux cleaned = 0.0153894 Jy ! Component: 150 - total flux cleaned = 0.0173575 Jy ! Component: 200 - total flux cleaned = 0.0178485 Jy ! Total flux subtracted in 200 components = 0.0178485 Jy ! Clean residual min=-0.007544 max=0.010646 Jy/beam ! Clean residual mean=0.000043 rms=0.002232 Jy/beam ! Combined flux in latest and established models = 0.1439 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.1439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111584Jy sigma=0.000668 ! Fit after self-cal, rms=0.111536Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* HN 1.17 KP 0.96 ! LA 1.00* MK 0.98 NL 0.84 OV 0.98 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.33 KP 0.89 ! LA 1.00* MK 1.00 NL 0.99 OV 0.98 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.21 KP 0.91 ! LA 1.00* MK 1.05 NL 0.93 OV 0.92 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 4. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.111536Jy sigma=0.000668 ! Fit after self-cal, rms=0.119317Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.549 mas, bmaj=6.988 mas, bpa=-5.875 degrees ! Estimated noise=1537.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0096242 Jy ! Component: 100 - total flux cleaned = 0.0130751 Jy ! Component: 150 - total flux cleaned = 0.013989 Jy ! Component: 200 - total flux cleaned = 0.0145133 Jy ! Total flux subtracted in 200 components = 0.0145133 Jy ! Clean residual min=-0.004862 max=0.005687 Jy/beam ! Clean residual mean=0.000022 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.158413 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.158413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118524Jy sigma=0.000659 ! Fit after self-cal, rms=0.118805Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118805Jy sigma=0.000658 ! Fit after self-cal, rms=0.120327Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.539 mas, bmaj=6.961 mas, bpa=-5.959 degrees ! Estimated noise=1523.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385417 Jy ! Component: 100 - total flux cleaned = 0.00524442 Jy ! Component: 150 - total flux cleaned = 0.00544184 Jy ! Component: 200 - total flux cleaned = 0.00555392 Jy ! Total flux subtracted in 200 components = 0.00555392 Jy ! Clean residual min=-0.003807 max=0.003558 Jy/beam ! Clean residual mean=0.000005 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.163967 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.163967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120163Jy sigma=0.000652 ! Fit after self-cal, rms=0.120269Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152018 Jy ! Component: 100 - total flux cleaned = 0.00178767 Jy ! Component: 150 - total flux cleaned = 0.00192055 Jy ! Component: 200 - total flux cleaned = 0.00196064 Jy ! Total flux subtracted in 200 components = 0.00196064 Jy ! Clean residual min=-0.003846 max=0.003647 Jy/beam ! Clean residual mean=0.000006 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.165927 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.165927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120208Jy sigma=0.000652 ! Fit after self-cal, rms=0.120217Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120217Jy sigma=0.000652 ! Fit after self-cal, rms=0.122675Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=6.941 mas, bpa=-6.064 degrees ! Estimated noise=1517.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110799 Jy ! Component: 100 - total flux cleaned = 0.00125808 Jy ! Component: 150 - total flux cleaned = 0.00122713 Jy ! Component: 200 - total flux cleaned = 0.00119943 Jy ! Total flux subtracted in 200 components = 0.00119943 Jy ! Clean residual min=-0.003466 max=0.003027 Jy/beam ! Clean residual mean=0.000001 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.167127 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.167127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122639Jy sigma=0.000650 ! Fit after self-cal, rms=0.122705Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562059 Jy ! Component: 100 - total flux cleaned = 0.000536254 Jy ! Component: 150 - total flux cleaned = 0.000512185 Jy ! Component: 200 - total flux cleaned = 0.000469764 Jy ! Total flux subtracted in 200 components = 0.000469764 Jy ! Clean residual min=-0.003526 max=0.003003 Jy/beam ! Clean residual mean=0.000002 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.167597 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.167597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122684Jy sigma=0.000650 ! Fit after self-cal, rms=0.122691Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122691Jy sigma=0.000650 ! Fit after self-cal, rms=0.122582Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.444 mas, bmaj=15.2 mas, bpa=-3.74 degrees ! Estimated noise=2179.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111834 Jy ! Component: 100 - total flux cleaned = -8.66494e-06 Jy ! Component: 150 - total flux cleaned = -4.38472e-05 Jy ! Component: 200 - total flux cleaned = -0.00010635 Jy ! Total flux subtracted in 200 components = -0.00010635 Jy ! Clean residual min=-0.005345 max=0.003550 Jy/beam ! Clean residual mean=0.000004 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.16749 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 78 components and 0.16749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122581Jy sigma=0.000650 ! Fit after self-cal, rms=0.122582Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.36286e-05 Jy ! Component: 100 - total flux cleaned = -7.0431e-05 Jy ! Component: 150 - total flux cleaned = -9.47312e-05 Jy ! Component: 200 - total flux cleaned = -0.000117173 Jy ! Total flux subtracted in 200 components = -0.000117173 Jy ! Clean residual min=-0.005370 max=0.003528 Jy/beam ! Clean residual mean=0.000004 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.167373 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 81 components and 0.167373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122587Jy sigma=0.000650 ! Fit after self-cal, rms=0.122588Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=6.933 mas, bpa=-6.068 degrees ! Estimated noise=1515.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.538 x 6.933 at -6.068 degrees (North through East) ! Clean map min=-0.0033254 max=0.13209 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.292 mas, bmaj=6.637 mas, bpa=-6.828 degrees ! Estimated noise=1971.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101962 Jy ! Component: 100 - total flux cleaned = 0.125569 Jy ! Component: 150 - total flux cleaned = 0.137617 Jy ! Component: 200 - total flux cleaned = 0.146059 Jy ! Total flux subtracted in 200 components = 0.146059 Jy ! Clean residual min=-0.005621 max=0.005599 Jy/beam ! Clean residual mean=-0.000007 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.146059 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.146059 Jy ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=6.933 mas, bpa=-6.068 degrees ! Estimated noise=1515.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692655 Jy ! Component: 100 - total flux cleaned = 0.0115402 Jy ! Component: 150 - total flux cleaned = 0.0148057 Jy ! Component: 200 - total flux cleaned = 0.0172427 Jy ! Total flux subtracted in 200 components = 0.0172427 Jy ! Clean residual min=-0.003728 max=0.003226 Jy/beam ! Clean residual mean=0.000002 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.163302 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.163302 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.444 mas, bmaj=15.2 mas, bpa=-3.74 degrees ! Estimated noise=2179.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242867 Jy ! Component: 100 - total flux cleaned = 0.0030551 Jy ! Component: 150 - total flux cleaned = 0.00321912 Jy ! Component: 200 - total flux cleaned = 0.00336381 Jy ! Total flux subtracted in 200 components = 0.00336381 Jy ! Clean residual min=-0.005421 max=0.003696 Jy/beam ! Clean residual mean=0.000005 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.166666 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.51895e-05 Jy ! Component: 100 - total flux cleaned = 0.000124056 Jy ! Component: 150 - total flux cleaned = 0.000124748 Jy ! Component: 200 - total flux cleaned = 0.000149878 Jy ! Total flux subtracted in 200 components = 0.000149878 Jy ! Clean residual min=-0.005426 max=0.003616 Jy/beam ! Clean residual mean=0.000004 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.166816 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 49 components and 0.166816 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=6.933 mas, bpa=-6.068 degrees ! Estimated noise=1515.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362579 Jy ! Component: 100 - total flux cleaned = 0.00046251 Jy ! Component: 150 - total flux cleaned = 0.000464249 Jy ! Component: 200 - total flux cleaned = 0.000548203 Jy ! Total flux subtracted in 200 components = 0.000548203 Jy ! Clean residual min=-0.003389 max=0.003037 Jy/beam ! Clean residual mean=0.000001 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.167364 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.167364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122644Jy sigma=0.000651 ! Fit after self-cal, rms=0.122649Jy sigma=0.000651 wmodel J0121-2806_S_2017_07_16_pus_map.mod ! Writing 66 model components to file: J0121-2806_S_2017_07_16_pus_map.mod wobs J0121-2806_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0121-2806_S_2017_07_16_pus_uvs.fits wwins J0121-2806_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J0121-2806_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117505 Jy ! Component: 100 - total flux cleaned = -0.00112069 Jy ! Component: 150 - total flux cleaned = -0.00107008 Jy ! Component: 200 - total flux cleaned = -0.00111833 Jy ! Component: 250 - total flux cleaned = -0.00120924 Jy ! Component: 300 - total flux cleaned = -0.00120963 Jy ! Component: 350 - total flux cleaned = -0.00145833 Jy ! Component: 400 - total flux cleaned = -0.00157756 Jy ! Component: 450 - total flux cleaned = -0.00161652 Jy ! Component: 500 - total flux cleaned = -0.00169261 Jy ! Component: 550 - total flux cleaned = -0.00162059 Jy ! Component: 600 - total flux cleaned = -0.00158554 Jy ! Component: 650 - total flux cleaned = -0.00151686 Jy ! Component: 700 - total flux cleaned = -0.00141613 Jy ! Component: 750 - total flux cleaned = -0.00125318 Jy ! Component: 800 - total flux cleaned = -0.00118998 Jy ! Component: 850 - total flux cleaned = -0.00106517 Jy ! Component: 900 - total flux cleaned = -0.000942675 Jy ! Component: 950 - total flux cleaned = -0.000735058 Jy ! Component: 1000 - total flux cleaned = -0.00064813 Jy ! Component: 1050 - total flux cleaned = -0.000563063 Jy ! Component: 1100 - total flux cleaned = -0.000452107 Jy ! Component: 1150 - total flux cleaned = -0.000424796 Jy ! Component: 1200 - total flux cleaned = -0.000371944 Jy ! Component: 1250 - total flux cleaned = -0.000293308 Jy ! Component: 1300 - total flux cleaned = -0.000164401 Jy ! Component: 1350 - total flux cleaned = -3.75602e-05 Jy ! Component: 1400 - total flux cleaned = 8.62501e-05 Jy ! Component: 1450 - total flux cleaned = 0.000159512 Jy ! Component: 1500 - total flux cleaned = 0.000303043 Jy ! Component: 1550 - total flux cleaned = 0.000350291 Jy ! Component: 1600 - total flux cleaned = 0.000443059 Jy ! Component: 1650 - total flux cleaned = 0.00046643 Jy ! Component: 1700 - total flux cleaned = 0.000647325 Jy ! Component: 1750 - total flux cleaned = 0.000736339 Jy ! Component: 1800 - total flux cleaned = 0.000802615 Jy ! Component: 1850 - total flux cleaned = 0.000911275 Jy ! Component: 1900 - total flux cleaned = 0.00108315 Jy ! Component: 1950 - total flux cleaned = 0.00118887 Jy ! Component: 2000 - total flux cleaned = 0.00127255 Jy ! Component: 2050 - total flux cleaned = 0.00135529 Jy ! Component: 2100 - total flux cleaned = 0.00151859 Jy ! Component: 2150 - total flux cleaned = 0.00159949 Jy ! Component: 2200 - total flux cleaned = 0.00173933 Jy ! Component: 2250 - total flux cleaned = 0.00187742 Jy ! Component: 2300 - total flux cleaned = 0.00199449 Jy ! Component: 2350 - total flux cleaned = 0.00209107 Jy ! Component: 2400 - total flux cleaned = 0.00222542 Jy ! Component: 2450 - total flux cleaned = 0.00237721 Jy ! Component: 2500 - total flux cleaned = 0.00248982 Jy ! Component: 2550 - total flux cleaned = 0.00265718 Jy ! Component: 2600 - total flux cleaned = 0.0027861 Jy ! Component: 2650 - total flux cleaned = 0.00295037 Jy ! Component: 2700 - total flux cleaned = 0.00313107 Jy ! Component: 2750 - total flux cleaned = 0.00329216 Jy ! Component: 2800 - total flux cleaned = 0.00341637 Jy ! Component: 2850 - total flux cleaned = 0.00357469 Jy ! Component: 2900 - total flux cleaned = 0.00367945 Jy ! Component: 2950 - total flux cleaned = 0.00383511 Jy ! Component: 3000 - total flux cleaned = 0.00402363 Jy ! Component: 3050 - total flux cleaned = 0.00412564 Jy ! Component: 3100 - total flux cleaned = 0.00426048 Jy ! Component: 3150 - total flux cleaned = 0.00437769 Jy ! Component: 3200 - total flux cleaned = 0.00452695 Jy ! Component: 3250 - total flux cleaned = 0.00464206 Jy ! Component: 3300 - total flux cleaned = 0.00477244 Jy ! Component: 3350 - total flux cleaned = 0.00486938 Jy ! Component: 3400 - total flux cleaned = 0.00491772 Jy ! Component: 3450 - total flux cleaned = 0.00509307 Jy ! Component: 3500 - total flux cleaned = 0.00515646 Jy ! Component: 3550 - total flux cleaned = 0.00523488 Jy ! Component: 3600 - total flux cleaned = 0.00531293 Jy ! Component: 3650 - total flux cleaned = 0.00548298 Jy ! Component: 3700 - total flux cleaned = 0.00554435 Jy ! Component: 3750 - total flux cleaned = 0.00562047 Jy ! Component: 3800 - total flux cleaned = 0.00571124 Jy ! Component: 3850 - total flux cleaned = 0.00581634 Jy ! Component: 3900 - total flux cleaned = 0.00586106 Jy ! Component: 3950 - total flux cleaned = 0.0060091 Jy ! Component: 4000 - total flux cleaned = 0.00605316 Jy ! Component: 4050 - total flux cleaned = 0.00616999 Jy ! Total flux subtracted in 4096 components = 0.00624249 Jy ! Clean residual min=-0.000807 max=0.000917 Jy/beam ! Clean residual mean=0.000002 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.173607 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 338 components and 0.173606 Jy ![Exited script file: muppet] wmap "J0121-2806_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.538 x 6.933 at -6.068 degrees (North through East) ! Clean map min=-0.0018726 max=0.13149 Jy/beam ! Writing clean map to FITS file: J0121-2806_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.131493 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000252191 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.57537 0.57537 1.15074 2.30148 4.60296 9.20592 18.4118 36.8237 73.6474 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.131 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.538 x 6.933 at -6.068 degrees (North through East) ! Clean map min=-0.0018726 max=0.13149 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0121-2806_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:57:13 2019