! Started logfile: J0121+1149_X_2017_06_10_pus_uvs.log on Mon May 6 12:40:32 2019 obs J0121+1149_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0121+1149_X_2017_06_10_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.780342 visibilities/baseline/integration-bin. ! Found source: J0121+1149 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 10956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0121+1149_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.509419Jy sigma=0.004701 ! Fit after self-cal, rms=0.494162Jy sigma=0.004556 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7416 mas, bmaj=1.814 mas, bpa=4.499 degrees ! Estimated noise=1056.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.765269 Jy ! Component: 100 - total flux cleaned = 1.08431 Jy ! Total flux subtracted in 100 components = 1.08431 Jy ! Clean residual min=-0.056273 max=0.152653 Jy/beam ! Clean residual mean=-0.000244 rms=0.018673 Jy/beam ! Combined flux in latest and established models = 1.08431 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.08431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.349600Jy sigma=0.003328 ! Fit after self-cal, rms=0.337507Jy sigma=0.003223 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189263 Jy ! Component: 100 - total flux cleaned = 0.301731 Jy ! Total flux subtracted in 100 components = 0.301731 Jy ! Clean residual min=-0.031963 max=0.064704 Jy/beam ! Clean residual mean=-0.000083 rms=0.008958 Jy/beam ! Combined flux in latest and established models = 1.38604 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 1.38604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177408Jy sigma=0.001670 ! Fit after self-cal, rms=0.174247Jy sigma=0.001641 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-0.4, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.080997 Jy ! Component: 100 - total flux cleaned = 0.134216 Jy ! Total flux subtracted in 100 components = 0.134216 Jy ! Clean residual min=-0.021831 max=0.033648 Jy/beam ! Clean residual mean=-0.000021 rms=0.005448 Jy/beam ! Combined flux in latest and established models = 1.52026 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 1.52026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121331Jy sigma=0.001116 ! Fit after self-cal, rms=0.119539Jy sigma=0.001100 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415841 Jy ! Component: 100 - total flux cleaned = 0.0703887 Jy ! Total flux subtracted in 100 components = 0.0703887 Jy ! Clean residual min=-0.018500 max=0.021964 Jy/beam ! Clean residual mean=0.000013 rms=0.003940 Jy/beam ! Combined flux in latest and established models = 1.59065 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 1.59065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101210Jy sigma=0.000912 ! Fit after self-cal, rms=0.100358Jy sigma=0.000904 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8976 mas, bmaj=2.041 mas, bpa=4.322 degrees ! Estimated noise=732.099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258856 Jy ! Component: 100 - total flux cleaned = 0.041752 Jy ! Component: 150 - total flux cleaned = 0.0475864 Jy ! Component: 200 - total flux cleaned = 0.0519253 Jy ! Total flux subtracted in 200 components = 0.0519253 Jy ! Clean residual min=-0.013063 max=0.012223 Jy/beam ! Clean residual mean=0.000069 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 1.64257 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 60 components and 1.64257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092156Jy sigma=0.000823 ! Fit after self-cal, rms=0.091657Jy sigma=0.000819 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.02 KP 1.00 ! LA 0.97 MK 1.01 NL 0.97 OV 0.99 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.98 KP 0.98 ! LA 0.97 MK 1.02 NL 0.97 OV 0.99 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 0.99 ! LA 1.00 MK 1.04 NL 0.97 OV 0.99 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.02 KP 0.99 ! LA 1.00 MK 1.04 NL 0.97 OV 0.99 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.96 KP 0.99 ! LA 0.99 MK 1.05 NL 0.97 OV 1.00 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.00 KP 1.00 ! LA 1.00 MK 1.03 NL 0.98 OV 1.00 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.99 KP 1.01 ! LA 1.01 MK 1.05 NL 0.98 OV 1.00 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.00 KP 1.00 ! LA 0.98 MK 1.04 NL 0.97 OV 1.00 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.00 KP 1.01 ! LA 1.00 MK 1.04 NL 0.98 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.99 KP 1.01 ! LA 1.02 MK 1.06 NL 0.98 OV 1.00 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.03 KP 1.00 ! LA 1.02 MK 1.04 NL 0.98 OV 1.00 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 0.99 ! LA 1.00 MK 1.08 NL 0.99 OV 1.01 ! PT 1.03 SC 1.02 ! ! ! Fit before self-cal, rms=0.091657Jy sigma=0.000819 ! Fit after self-cal, rms=0.087186Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9082 mas, bmaj=2.054 mas, bpa=4.228 degrees ! Estimated noise=738.242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000438111 Jy ! Component: 100 - total flux cleaned = -0.000686974 Jy ! Component: 150 - total flux cleaned = -0.000915227 Jy ! Component: 200 - total flux cleaned = -0.000712033 Jy ! Total flux subtracted in 200 components = -0.000712033 Jy ! Clean residual min=-0.007908 max=0.007592 Jy/beam ! Clean residual mean=0.000047 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 1.64186 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 66 components and 1.64186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085564Jy sigma=0.000747 ! Fit after self-cal, rms=0.085319Jy sigma=0.000745 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085319Jy sigma=0.000745 ! Fit after self-cal, rms=0.083615Jy sigma=0.000728 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.909 mas, bmaj=2.055 mas, bpa=4.243 degrees ! Estimated noise=738.762 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000848464 Jy ! Component: 100 - total flux cleaned = -0.00107779 Jy ! Component: 150 - total flux cleaned = -0.000911677 Jy ! Component: 200 - total flux cleaned = -0.000916879 Jy ! Total flux subtracted in 200 components = -0.000916879 Jy ! Clean residual min=-0.008598 max=0.006562 Jy/beam ! Clean residual mean=0.000014 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 1.64094 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 1.64094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082657Jy sigma=0.000720 ! Fit after self-cal, rms=0.082460Jy sigma=0.000719 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218772 Jy ! Component: 100 - total flux cleaned = 0.000426359 Jy ! Component: 150 - total flux cleaned = 0.000564719 Jy ! Component: 200 - total flux cleaned = 0.000565889 Jy ! Total flux subtracted in 200 components = 0.000565889 Jy ! Clean residual min=-0.008634 max=0.006364 Jy/beam ! Clean residual mean=0.000013 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 1.64151 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 1.64151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081807Jy sigma=0.000714 ! Fit after self-cal, rms=0.081658Jy sigma=0.000713 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081658Jy sigma=0.000713 ! Fit after self-cal, rms=0.081668Jy sigma=0.000712 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9091 mas, bmaj=2.055 mas, bpa=4.193 degrees ! Estimated noise=739.067 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000444543 Jy ! Component: 100 - total flux cleaned = -0.000155696 Jy ! Component: 150 - total flux cleaned = -2.58821e-05 Jy ! Component: 200 - total flux cleaned = 9.90589e-05 Jy ! Total flux subtracted in 200 components = 9.90589e-05 Jy ! Clean residual min=-0.008583 max=0.006147 Jy/beam ! Clean residual mean=0.000008 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 1.64161 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 1.64161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081129Jy sigma=0.000708 ! Fit after self-cal, rms=0.081016Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.32641e-05 Jy ! Component: 100 - total flux cleaned = 9.091e-05 Jy ! Component: 150 - total flux cleaned = 0.00033041 Jy ! Component: 200 - total flux cleaned = 0.000326874 Jy ! Total flux subtracted in 200 components = 0.000326874 Jy ! Clean residual min=-0.008567 max=0.005934 Jy/beam ! Clean residual mean=0.000008 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 1.64193 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 1.64194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080586Jy sigma=0.000703 ! Fit after self-cal, rms=0.080500Jy sigma=0.000703 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080500Jy sigma=0.000703 ! Fit after self-cal, rms=0.080512Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.139 mas, bmaj=2.972 mas, bpa=-0.4534 degrees ! Estimated noise=925.788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000459151 Jy ! Component: 100 - total flux cleaned = 0.000558523 Jy ! Component: 150 - total flux cleaned = 0.000618495 Jy ! Component: 200 - total flux cleaned = 0.000617924 Jy ! Total flux subtracted in 200 components = 0.000617924 Jy ! Clean residual min=-0.003630 max=0.005055 Jy/beam ! Clean residual mean=0.000018 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 1.64255 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 1.64255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080595Jy sigma=0.000703 ! Fit after self-cal, rms=0.080436Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, 23.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323354 Jy ! Component: 100 - total flux cleaned = 0.00448764 Jy ! Component: 150 - total flux cleaned = 0.00574174 Jy ! Component: 200 - total flux cleaned = 0.00689133 Jy ! Total flux subtracted in 200 components = 0.00689133 Jy ! Clean residual min=-0.003445 max=0.003176 Jy/beam ! Clean residual mean=0.000012 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 1.64944 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 113 components and 1.64944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080276Jy sigma=0.000700 ! Fit after self-cal, rms=0.080211Jy sigma=0.000700 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9092 mas, bmaj=2.055 mas, bpa=4.141 degrees ! Estimated noise=739.269 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9092 x 2.055 at 4.141 degrees (North through East) ! Clean map min=-0.0043922 max=0.96016 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080211Jy sigma=0.000700 ! Fit after self-cal, rms=0.075650Jy sigma=0.000657 ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9086 mas, bmaj=2.055 mas, bpa=4.175 degrees ! Estimated noise=738.627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274104 Jy ! Component: 100 - total flux cleaned = 0.0034074 Jy ! Component: 150 - total flux cleaned = 0.00385757 Jy ! Component: 200 - total flux cleaned = 0.00426801 Jy ! Total flux subtracted in 200 components = 0.00426801 Jy ! Clean residual min=-0.006986 max=0.005081 Jy/beam ! Clean residual mean=0.000004 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 1.65371 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 132 components and 1.65371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074989Jy sigma=0.000651 ! Fit after self-cal, rms=0.074951Jy sigma=0.000651 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554582 Jy ! Component: 100 - total flux cleaned = 0.000688658 Jy ! Component: 150 - total flux cleaned = 0.000815032 Jy ! Component: 200 - total flux cleaned = 0.000817972 Jy ! Total flux subtracted in 200 components = 0.000817972 Jy ! Clean residual min=-0.006675 max=0.004843 Jy/beam ! Clean residual mean=0.000003 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 1.65453 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 141 components and 1.65453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074545Jy sigma=0.000648 ! Fit after self-cal, rms=0.074516Jy sigma=0.000648 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074516Jy sigma=0.000648 ! Fit after self-cal, rms=0.074523Jy sigma=0.000647 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7502 mas, bmaj=1.825 mas, bpa=4.319 degrees ! Estimated noise=1072.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.784102 Jy ! Component: 100 - total flux cleaned = 1.12054 Jy ! Component: 150 - total flux cleaned = 1.3038 Jy ! Component: 200 - total flux cleaned = 1.41292 Jy ! Total flux subtracted in 200 components = 1.41292 Jy ! Clean residual min=-0.021408 max=0.056997 Jy/beam ! Clean residual mean=-0.000092 rms=0.006736 Jy/beam ! Combined flux in latest and established models = 1.41291 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.41291 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9088 mas, bmaj=2.055 mas, bpa=4.13 degrees ! Estimated noise=738.879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0858215 Jy ! Component: 100 - total flux cleaned = 0.135966 Jy ! Component: 150 - total flux cleaned = 0.167436 Jy ! Component: 200 - total flux cleaned = 0.188573 Jy ! Total flux subtracted in 200 components = 0.188573 Jy ! Clean residual min=-0.006383 max=0.012337 Jy/beam ! Clean residual mean=-0.000019 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 1.60149 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 45 components and 1.60149 Jy ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (0.2, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149911 Jy ! Component: 100 - total flux cleaned = 0.0256299 Jy ! Component: 150 - total flux cleaned = 0.0334534 Jy ! Component: 200 - total flux cleaned = 0.0383656 Jy ! Total flux subtracted in 200 components = 0.0383656 Jy ! Clean residual min=-0.005064 max=0.005557 Jy/beam ! Clean residual mean=0.000007 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 1.63985 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 1.63985 Jy ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (1, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427641 Jy ! Component: 100 - total flux cleaned = 0.00675022 Jy ! Component: 150 - total flux cleaned = 0.00880431 Jy ! Component: 200 - total flux cleaned = 0.00984147 Jy ! Total flux subtracted in 200 components = 0.00984147 Jy ! Clean residual min=-0.004386 max=0.004310 Jy/beam ! Clean residual mean=0.000007 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 1.64969 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 71 components and 1.64969 Jy ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.139 mas, bmaj=2.972 mas, bpa=-0.4461 degrees ! Estimated noise=925.752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193758 Jy ! Component: 100 - total flux cleaned = 0.00374492 Jy ! Component: 150 - total flux cleaned = 0.00476208 Jy ! Component: 200 - total flux cleaned = 0.00554047 Jy ! Total flux subtracted in 200 components = 0.00554047 Jy ! Clean residual min=-0.002753 max=0.002773 Jy/beam ! Clean residual mean=0.000015 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 1.65524 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182882 Jy ! Component: 100 - total flux cleaned = 7.11816e-05 Jy ! Component: 150 - total flux cleaned = 7.27455e-05 Jy ! Component: 200 - total flux cleaned = 2.29555e-05 Jy ! Total flux subtracted in 200 components = 2.29555e-05 Jy ! Clean residual min=-0.002603 max=0.002685 Jy/beam ! Clean residual mean=0.000015 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 1.65526 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 123 components and 1.65526 Jy ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9088 mas, bmaj=2.055 mas, bpa=4.13 degrees ! Estimated noise=738.879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00189205 Jy ! Component: 100 - total flux cleaned = -0.00203611 Jy ! Component: 150 - total flux cleaned = -0.00189786 Jy ! Component: 200 - total flux cleaned = -0.00190001 Jy ! Total flux subtracted in 200 components = -0.00190001 Jy ! Clean residual min=-0.003846 max=0.003799 Jy/beam ! Clean residual mean=0.000004 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 1.65336 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 136 components and 1.65336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073774Jy sigma=0.000642 ! Fit after self-cal, rms=0.073699Jy sigma=0.000641 wmodel J0121+1149_X_2017_06_10_pus_map.mod ! Writing 136 model components to file: J0121+1149_X_2017_06_10_pus_map.mod wobs J0121+1149_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0121+1149_X_2017_06_10_pus_uvs.fits wwins J0121+1149_X_2017_06_10_pus_map.win ! wwins: Wrote 5 windows to J0121+1149_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.13501e-05 Jy ! Component: 100 - total flux cleaned = -0.000119258 Jy ! Component: 150 - total flux cleaned = -0.000180715 Jy ! Component: 200 - total flux cleaned = -6.23454e-05 Jy ! Component: 250 - total flux cleaned = -0.000120107 Jy ! Component: 300 - total flux cleaned = -0.000233915 Jy ! Component: 350 - total flux cleaned = -0.000345271 Jy ! Component: 400 - total flux cleaned = -0.000453568 Jy ! Component: 450 - total flux cleaned = -0.000454182 Jy ! Component: 500 - total flux cleaned = -0.000504856 Jy ! Component: 550 - total flux cleaned = -0.000605435 Jy ! Component: 600 - total flux cleaned = -0.000506861 Jy ! Component: 650 - total flux cleaned = -0.000410572 Jy ! Component: 700 - total flux cleaned = -0.000363557 Jy ! Component: 750 - total flux cleaned = -0.000364738 Jy ! Component: 800 - total flux cleaned = -0.000504272 Jy ! Component: 850 - total flux cleaned = -0.000685978 Jy ! Component: 900 - total flux cleaned = -0.000731085 Jy ! Component: 950 - total flux cleaned = -0.000863156 Jy ! Component: 1000 - total flux cleaned = -0.000993663 Jy ! Component: 1050 - total flux cleaned = -0.0011226 Jy ! Component: 1100 - total flux cleaned = -0.00124881 Jy ! Component: 1150 - total flux cleaned = -0.00120693 Jy ! Component: 1200 - total flux cleaned = -0.00137205 Jy ! Component: 1250 - total flux cleaned = -0.00133116 Jy ! Component: 1300 - total flux cleaned = -0.0013311 Jy ! Component: 1350 - total flux cleaned = -0.00141123 Jy ! Component: 1400 - total flux cleaned = -0.00137122 Jy ! Component: 1450 - total flux cleaned = -0.00121609 Jy ! Component: 1500 - total flux cleaned = -0.0012169 Jy ! Component: 1550 - total flux cleaned = -0.00129279 Jy ! Component: 1600 - total flux cleaned = -0.00114235 Jy ! Component: 1650 - total flux cleaned = -0.00110475 Jy ! Component: 1700 - total flux cleaned = -0.00103068 Jy ! Component: 1750 - total flux cleaned = -0.000848784 Jy ! Component: 1800 - total flux cleaned = -0.000776839 Jy ! Component: 1850 - total flux cleaned = -0.000776772 Jy ! Component: 1900 - total flux cleaned = -0.000777126 Jy ! Component: 1950 - total flux cleaned = -0.000846007 Jy ! Component: 2000 - total flux cleaned = -0.000810991 Jy ! Total flux subtracted in 2048 components = -0.000742735 Jy ! Clean residual min=-0.001969 max=0.001697 Jy/beam ! Clean residual mean=0.000002 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 1.65261 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 255 components and 1.65261 Jy ![Exited script file: muppet] wmap "J0121+1149_X_2017_06_10_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9088 x 2.055 at 4.13 degrees (North through East) ! Clean map min=-0.0025467 max=0.95838 Jy/beam ! Writing clean map to FITS file: J0121+1149_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.958379 invert ! Inverting map ! Your choice of large map pixels excluded 0.164% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000587288 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.183838 0.183838 0.367676 0.735352 1.4707 2.94141 5.88281 11.7656 23.5313 47.0625 94.125 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.958 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9088 x 2.055 at 4.13 degrees (North through East) ! Clean map min=-0.0025467 max=0.95838 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0121+1149_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:40:34 2019