! Started logfile: J0121+1149_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:32:31 2019 obs J0121+1149_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0121+1149_S_2017_05_31_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.420513 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0121+1149 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0121+1149_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.059087Jy sigma=0.009412 ! Fit after self-cal, rms=1.051784Jy sigma=0.009356 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.21 mas, bmaj=8.531 mas, bpa=8.422 degrees ! Estimated noise=3289.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58949 Jy ! Component: 100 - total flux cleaned = 1.93615 Jy ! Total flux subtracted in 100 components = 1.93615 Jy ! Clean residual min=-0.053351 max=0.096842 Jy/beam ! Clean residual mean=0.000307 rms=0.020515 Jy/beam ! Combined flux in latest and established models = 1.93615 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 1.93615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179856Jy sigma=0.001559 ! Fit after self-cal, rms=0.179866Jy sigma=0.001559 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.665 mas, bmaj=9.349 mas, bpa=7.16 degrees ! Estimated noise=2834.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.089369 Jy ! Component: 100 - total flux cleaned = 0.125707 Jy ! Component: 150 - total flux cleaned = 0.144342 Jy ! Component: 200 - total flux cleaned = 0.151493 Jy ! Total flux subtracted in 200 components = 0.151493 Jy ! Clean residual min=-0.029769 max=0.042433 Jy/beam ! Clean residual mean=0.000068 rms=0.010216 Jy/beam ! Combined flux in latest and established models = 2.08764 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 2.08764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135041Jy sigma=0.001142 ! Fit after self-cal, rms=0.134920Jy sigma=0.001142 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.99 KP 1.04 ! LA 1.02 MK 1.00* NL 0.92 OV 1.00* ! PT 1.02 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.04 KP 1.00 ! LA 1.00 MK 1.00* NL 1.05 OV 1.00* ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.03 KP 1.01 ! LA 1.01 MK 1.00* NL 0.99 OV 1.00* ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.94 KP 1.00* ! LA 1.01 MK 1.00* NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.134920Jy sigma=0.001142 ! Fit after self-cal, rms=0.090809Jy sigma=0.000781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.661 mas, bmaj=9.325 mas, bpa=7.158 degrees ! Estimated noise=2839.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014977 Jy ! Component: 100 - total flux cleaned = 0.00122406 Jy ! Component: 150 - total flux cleaned = 0.00122091 Jy ! Component: 200 - total flux cleaned = 0.00120295 Jy ! Total flux subtracted in 200 components = 0.00120295 Jy ! Clean residual min=-0.017166 max=0.032890 Jy/beam ! Clean residual mean=0.000047 rms=0.006864 Jy/beam ! Combined flux in latest and established models = 2.08884 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 2.08884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089532Jy sigma=0.000768 ! Fit after self-cal, rms=0.089231Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089231Jy sigma=0.000767 ! Fit after self-cal, rms=0.089197Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.661 mas, bmaj=9.325 mas, bpa=7.172 degrees ! Estimated noise=2839.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000821329 Jy ! Component: 100 - total flux cleaned = 0.000611253 Jy ! Component: 150 - total flux cleaned = 0.000798493 Jy ! Component: 200 - total flux cleaned = 0.000800182 Jy ! Total flux subtracted in 200 components = 0.000800182 Jy ! Clean residual min=-0.017319 max=0.032072 Jy/beam ! Clean residual mean=0.000046 rms=0.006636 Jy/beam ! Combined flux in latest and established models = 2.08964 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 2.08964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088456Jy sigma=0.000760 ! Fit after self-cal, rms=0.088275Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (46, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268815 Jy ! Component: 100 - total flux cleaned = 0.0392032 Jy ! Component: 150 - total flux cleaned = 0.0477228 Jy ! Component: 200 - total flux cleaned = 0.0544008 Jy ! Total flux subtracted in 200 components = 0.0544008 Jy ! Clean residual min=-0.011533 max=0.010910 Jy/beam ! Clean residual mean=0.000015 rms=0.002925 Jy/beam ! Combined flux in latest and established models = 2.14404 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 76 components and 2.14404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079953Jy sigma=0.000680 ! Fit after self-cal, rms=0.079676Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079676Jy sigma=0.000678 ! Fit after self-cal, rms=0.079259Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.663 mas, bmaj=9.324 mas, bpa=7.147 degrees ! Estimated noise=2833.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00656601 Jy ! Component: 100 - total flux cleaned = 0.0113307 Jy ! Component: 150 - total flux cleaned = 0.0150803 Jy ! Component: 200 - total flux cleaned = 0.0180858 Jy ! Total flux subtracted in 200 components = 0.0180858 Jy ! Clean residual min=-0.009458 max=0.008059 Jy/beam ! Clean residual mean=0.000009 rms=0.002286 Jy/beam ! Combined flux in latest and established models = 2.16213 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 107 components and 2.16213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078527Jy sigma=0.000669 ! Fit after self-cal, rms=0.078487Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173294 Jy ! Component: 100 - total flux cleaned = 0.00319416 Jy ! Component: 150 - total flux cleaned = 0.00452848 Jy ! Component: 200 - total flux cleaned = 0.00559599 Jy ! Total flux subtracted in 200 components = 0.00559599 Jy ! Clean residual min=-0.008983 max=0.007472 Jy/beam ! Clean residual mean=0.000010 rms=0.002147 Jy/beam ! Combined flux in latest and established models = 2.16773 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 122 components and 2.16773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078285Jy sigma=0.000667 ! Fit after self-cal, rms=0.078270Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078270Jy sigma=0.000667 ! Fit after self-cal, rms=0.078154Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.55 mas, bmaj=12.67 mas, bpa=-25.63 degrees ! Estimated noise=3056.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003338 Jy ! Component: 100 - total flux cleaned = 0.00490826 Jy ! Component: 150 - total flux cleaned = 0.00585146 Jy ! Component: 200 - total flux cleaned = 0.00659167 Jy ! Total flux subtracted in 200 components = 0.00659167 Jy ! Clean residual min=-0.008382 max=0.006948 Jy/beam ! Clean residual mean=0.000009 rms=0.002189 Jy/beam ! Combined flux in latest and established models = 2.17432 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 140 components and 2.17432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078048Jy sigma=0.000665 ! Fit after self-cal, rms=0.078026Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000819996 Jy ! Component: 100 - total flux cleaned = 0.00120489 Jy ! Component: 150 - total flux cleaned = 0.00130503 Jy ! Component: 200 - total flux cleaned = 0.00135301 Jy ! Total flux subtracted in 200 components = 0.00135301 Jy ! Clean residual min=-0.008119 max=0.006830 Jy/beam ! Clean residual mean=0.000009 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 2.17567 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 144 components and 2.17567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077967Jy sigma=0.000664 ! Fit after self-cal, rms=0.077956Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.662 mas, bmaj=9.32 mas, bpa=7.124 degrees ! Estimated noise=2832.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.662 x 9.32 at 7.124 degrees (North through East) ! Clean map min=-0.0075505 max=2.0405 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077956Jy sigma=0.000664 ! Fit after self-cal, rms=0.068945Jy sigma=0.000585 ! Inverting map and beam ! Estimated beam: bmin=5.663 mas, bmaj=9.318 mas, bpa=7.108 degrees ! Estimated noise=2832.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.22431e-05 Jy ! Component: 100 - total flux cleaned = 0.000457307 Jy ! Component: 150 - total flux cleaned = 0.000943277 Jy ! Component: 200 - total flux cleaned = 0.00138062 Jy ! Total flux subtracted in 200 components = 0.00138062 Jy ! Clean residual min=-0.007221 max=0.006531 Jy/beam ! Clean residual mean=0.000005 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 2.17705 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 159 components and 2.17705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068789Jy sigma=0.000584 ! Fit after self-cal, rms=0.068787Jy sigma=0.000584 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265603 Jy ! Component: 100 - total flux cleaned = 0.000378988 Jy ! Component: 150 - total flux cleaned = 0.000587087 Jy ! Component: 200 - total flux cleaned = 0.000780354 Jy ! Total flux subtracted in 200 components = 0.000780354 Jy ! Clean residual min=-0.007076 max=0.006387 Jy/beam ! Clean residual mean=0.000006 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 2.17783 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 164 components and 2.17783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068701Jy sigma=0.000584 ! Fit after self-cal, rms=0.068699Jy sigma=0.000584 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068699Jy sigma=0.000584 ! Fit after self-cal, rms=0.068684Jy sigma=0.000583 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.248 mas, bmaj=8.513 mas, bpa=8.103 degrees ! Estimated noise=3274.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58189 Jy ! Component: 100 - total flux cleaned = 1.92685 Jy ! Component: 150 - total flux cleaned = 2.00922 Jy ! Component: 200 - total flux cleaned = 2.04867 Jy ! Total flux subtracted in 200 components = 2.04867 Jy ! Clean residual min=-0.022026 max=0.027260 Jy/beam ! Clean residual mean=0.000123 rms=0.007381 Jy/beam ! Combined flux in latest and established models = 2.04867 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 2.04867 Jy ! Inverting map and beam ! Estimated beam: bmin=5.662 mas, bmaj=9.316 mas, bpa=7.101 degrees ! Estimated noise=2833.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310259 Jy ! Component: 100 - total flux cleaned = 0.0526487 Jy ! Component: 150 - total flux cleaned = 0.0689959 Jy ! Component: 200 - total flux cleaned = 0.0816512 Jy ! Total flux subtracted in 200 components = 0.0816512 Jy ! Clean residual min=-0.014447 max=0.014471 Jy/beam ! Clean residual mean=0.000031 rms=0.003951 Jy/beam ! Combined flux in latest and established models = 2.13032 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 60 components and 2.13032 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.546 mas, bmaj=12.67 mas, bpa=-25.65 degrees ! Estimated noise=3057.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133517 Jy ! Component: 100 - total flux cleaned = 0.0226257 Jy ! Component: 150 - total flux cleaned = 0.0295177 Jy ! Component: 200 - total flux cleaned = 0.034823 Jy ! Total flux subtracted in 200 components = 0.034823 Jy ! Clean residual min=-0.011114 max=0.008607 Jy/beam ! Clean residual mean=0.000023 rms=0.002693 Jy/beam ! Combined flux in latest and established models = 2.16514 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415472 Jy ! Component: 100 - total flux cleaned = 0.00750666 Jy ! Component: 150 - total flux cleaned = 0.0102405 Jy ! Component: 200 - total flux cleaned = 0.0124143 Jy ! Total flux subtracted in 200 components = 0.0124143 Jy ! Clean residual min=-0.009755 max=0.006595 Jy/beam ! Clean residual mean=0.000011 rms=0.002302 Jy/beam ! Combined flux in latest and established models = 2.17756 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 121 components and 2.17756 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.662 mas, bmaj=9.316 mas, bpa=7.101 degrees ! Estimated noise=2833.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585188 Jy ! Component: 100 - total flux cleaned = 0.000924422 Jy ! Component: 150 - total flux cleaned = 0.00122916 Jy ! Component: 200 - total flux cleaned = 0.00149793 Jy ! Total flux subtracted in 200 components = 0.00149793 Jy ! Clean residual min=-0.009679 max=0.008323 Jy/beam ! Clean residual mean=0.000012 rms=0.002183 Jy/beam ! Combined flux in latest and established models = 2.17906 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 136 components and 2.17906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069499Jy sigma=0.000590 ! Fit after self-cal, rms=0.069433Jy sigma=0.000589 wmodel J0121+1149_S_2017_05_31_pus_map.mod ! Writing 136 model components to file: J0121+1149_S_2017_05_31_pus_map.mod wobs J0121+1149_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0121+1149_S_2017_05_31_pus_uvs.fits wwins J0121+1149_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J0121+1149_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234964 Jy ! Component: 100 - total flux cleaned = -0.00296467 Jy ! Component: 150 - total flux cleaned = -0.00395977 Jy ! Component: 200 - total flux cleaned = -0.00456361 Jy ! Component: 250 - total flux cleaned = -0.00512107 Jy ! Component: 300 - total flux cleaned = -0.0058804 Jy ! Component: 350 - total flux cleaned = -0.00619054 Jy ! Component: 400 - total flux cleaned = -0.00618997 Jy ! Component: 450 - total flux cleaned = -0.00652663 Jy ! Component: 500 - total flux cleaned = -0.0067813 Jy ! Component: 550 - total flux cleaned = -0.00720245 Jy ! Component: 600 - total flux cleaned = -0.00754484 Jy ! Component: 650 - total flux cleaned = -0.00792346 Jy ! Component: 700 - total flux cleaned = -0.00823143 Jy ! Component: 750 - total flux cleaned = -0.00857227 Jy ! Component: 800 - total flux cleaned = -0.00885113 Jy ! Component: 850 - total flux cleaned = -0.00912111 Jy ! Component: 900 - total flux cleaned = -0.00947382 Jy ! Component: 950 - total flux cleaned = -0.00981873 Jy ! Component: 1000 - total flux cleaned = -0.0101981 Jy ! Component: 1050 - total flux cleaned = -0.0105291 Jy ! Component: 1100 - total flux cleaned = -0.0109375 Jy ! Component: 1150 - total flux cleaned = -0.0113022 Jy ! Component: 1200 - total flux cleaned = -0.0116651 Jy ! Component: 1250 - total flux cleaned = -0.0120284 Jy ! Component: 1300 - total flux cleaned = -0.012392 Jy ! Component: 1350 - total flux cleaned = -0.0127978 Jy ! Component: 1400 - total flux cleaned = -0.0131653 Jy ! Component: 1450 - total flux cleaned = -0.0135345 Jy ! Component: 1500 - total flux cleaned = -0.0139482 Jy ! Component: 1550 - total flux cleaned = -0.0143232 Jy ! Component: 1600 - total flux cleaned = -0.0146593 Jy ! Component: 1650 - total flux cleaned = -0.0149985 Jy ! Component: 1700 - total flux cleaned = -0.0153853 Jy ! Component: 1750 - total flux cleaned = -0.0157785 Jy ! Component: 1800 - total flux cleaned = -0.0160885 Jy ! Component: 1850 - total flux cleaned = -0.0164484 Jy ! Component: 1900 - total flux cleaned = -0.0167685 Jy ! Component: 1950 - total flux cleaned = -0.0171412 Jy ! Component: 2000 - total flux cleaned = -0.0175203 Jy ! Component: 2050 - total flux cleaned = -0.0178096 Jy ! Component: 2100 - total flux cleaned = -0.0181044 Jy ! Component: 2150 - total flux cleaned = -0.0184039 Jy ! Component: 2200 - total flux cleaned = -0.0187092 Jy ! Component: 2250 - total flux cleaned = -0.0189679 Jy ! Component: 2300 - total flux cleaned = -0.0193373 Jy ! Component: 2350 - total flux cleaned = -0.0196611 Jy ! Component: 2400 - total flux cleaned = -0.0199356 Jy ! Component: 2450 - total flux cleaned = -0.0202149 Jy ! Component: 2500 - total flux cleaned = -0.0204432 Jy ! Component: 2550 - total flux cleaned = -0.0207359 Jy ! Component: 2600 - total flux cleaned = -0.0208564 Jy ! Component: 2650 - total flux cleaned = -0.0210411 Jy ! Component: 2700 - total flux cleaned = -0.0211038 Jy ! Component: 2750 - total flux cleaned = -0.0212958 Jy ! Component: 2800 - total flux cleaned = -0.021493 Jy ! Component: 2850 - total flux cleaned = -0.0216945 Jy ! Component: 2900 - total flux cleaned = -0.0219711 Jy ! Component: 2950 - total flux cleaned = -0.0221137 Jy ! Component: 3000 - total flux cleaned = -0.0223307 Jy ! Component: 3050 - total flux cleaned = -0.0225542 Jy ! Component: 3100 - total flux cleaned = -0.0227833 Jy ! Component: 3150 - total flux cleaned = -0.0230174 Jy ! Component: 3200 - total flux cleaned = -0.0232566 Jy ! Component: 3250 - total flux cleaned = -0.0235841 Jy ! Component: 3300 - total flux cleaned = -0.0238373 Jy ! Component: 3350 - total flux cleaned = -0.0240972 Jy ! Component: 3400 - total flux cleaned = -0.0243626 Jy ! Component: 3450 - total flux cleaned = -0.0247256 Jy ! Component: 3500 - total flux cleaned = -0.0250045 Jy ! Component: 3550 - total flux cleaned = -0.0252908 Jy ! Component: 3600 - total flux cleaned = -0.0255837 Jy ! Component: 3650 - total flux cleaned = -0.0259833 Jy ! Component: 3700 - total flux cleaned = -0.0262931 Jy ! Component: 3750 - total flux cleaned = -0.0267158 Jy ! Component: 3800 - total flux cleaned = -0.0269328 Jy ! Component: 3850 - total flux cleaned = -0.0273773 Jy ! Component: 3900 - total flux cleaned = -0.0277187 Jy ! Component: 3950 - total flux cleaned = -0.0280685 Jy ! Component: 4000 - total flux cleaned = -0.0285482 Jy ! Component: 4050 - total flux cleaned = -0.0289166 Jy ! Total flux subtracted in 4096 components = -0.0292951 Jy ! Clean residual min=-0.006783 max=0.006745 Jy/beam ! Clean residual mean=0.000009 rms=0.002039 Jy/beam ! Combined flux in latest and established models = 2.14976 Jy keep ! Adding 165 model components to the UV plane model. ! The established model now contains 301 components and 2.14976 Jy ![Exited script file: muppet] wmap "J0121+1149_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.662 x 9.316 at 7.101 degrees (North through East) ! Clean map min=-0.01288 max=2.0337 Jy/beam ! Writing clean map to FITS file: J0121+1149_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.03372 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0022384 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.330193 0.330193 0.660386 1.32077 2.64155 5.28309 10.5662 21.1324 42.2647 84.5295 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0067 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.033 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.662 x 9.316 at 7.101 degrees (North through East) ! Clean map min=-0.01288 max=2.0337 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0121+1149_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:32:40 2019