! Started logfile: J0119-1654_S_2017_05_01_pus_uvs.log on Wed May 1 18:24:18 2019 obs J0119-1654_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0119-1654_S_2017_05_01_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.958333 visibilities/baseline/integration-bin. ! Found source: J0119-1654 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 9660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0119-1654_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915702Jy sigma=0.005468 ! Fit after self-cal, rms=0.889798Jy sigma=0.005341 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=6.858 mas, bpa=-4.36 degrees ! Estimated noise=2042.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.091324 Jy ! Component: 100 - total flux cleaned = 0.11522 Jy ! Total flux subtracted in 100 components = 0.11522 Jy ! Clean residual min=-0.006459 max=0.009377 Jy/beam ! Clean residual mean=0.000001 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.11522 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.11522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141835Jy sigma=0.000681 ! Fit after self-cal, rms=0.141899Jy sigma=0.000681 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=7.813 mas, bpa=-2.838 degrees ! Estimated noise=1356.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123016 Jy ! Component: 100 - total flux cleaned = 0.0181514 Jy ! Component: 150 - total flux cleaned = 0.0213037 Jy ! Component: 200 - total flux cleaned = 0.0230308 Jy ! Total flux subtracted in 200 components = 0.0230308 Jy ! Clean residual min=-0.004380 max=0.004061 Jy/beam ! Clean residual mean=-0.000004 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.138251 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 28 components and 0.138251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140784Jy sigma=0.000674 ! Fit after self-cal, rms=0.140854Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.90 HN 1.03 KP 1.05 ! LA 1.04 MK 0.98 NL 0.98 OV 1.01 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 1.28 KP 0.97 ! LA 0.98 MK 1.01 NL 0.98 OV 1.10 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.03 KP 1.03 ! LA 0.99 MK 1.06 NL 1.02 OV 0.95 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.99 KP 1.00* ! LA 0.66 MK 1.03 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.140854Jy sigma=0.000674 ! Fit after self-cal, rms=0.137703Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=7.822 mas, bpa=-2.421 degrees ! Estimated noise=1361.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205283 Jy ! Component: 100 - total flux cleaned = -0.000318771 Jy ! Component: 150 - total flux cleaned = -0.000415817 Jy ! Component: 200 - total flux cleaned = -0.00047388 Jy ! Total flux subtracted in 200 components = -0.00047388 Jy ! Clean residual min=-0.004100 max=0.003811 Jy/beam ! Clean residual mean=0.000001 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.137777 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.137777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137679Jy sigma=0.000670 ! Fit after self-cal, rms=0.137666Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137666Jy sigma=0.000670 ! Fit after self-cal, rms=0.148198Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=7.834 mas, bpa=-2.45 degrees ! Estimated noise=1361.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269795 Jy ! Component: 100 - total flux cleaned = -0.00029922 Jy ! Component: 150 - total flux cleaned = -0.000377164 Jy ! Component: 200 - total flux cleaned = -0.000449226 Jy ! Total flux subtracted in 200 components = -0.000449226 Jy ! Clean residual min=-0.003201 max=0.003600 Jy/beam ! Clean residual mean=0.000001 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.137328 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.137328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148178Jy sigma=0.000667 ! Fit after self-cal, rms=0.148310Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (118, -99). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024827 Jy ! Component: 100 - total flux cleaned = 0.00225435 Jy ! Component: 150 - total flux cleaned = 0.00191775 Jy ! Component: 200 - total flux cleaned = 0.00174093 Jy ! Total flux subtracted in 200 components = 0.00174093 Jy ! Clean residual min=-0.003142 max=0.003335 Jy/beam ! Clean residual mean=0.000001 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.139069 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.139069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148189Jy sigma=0.000666 ! Fit after self-cal, rms=0.148170Jy sigma=0.000666 ! Inverting map ! Added new window around map position (-42.5, -108). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271661 Jy ! Component: 100 - total flux cleaned = 0.00326343 Jy ! Component: 150 - total flux cleaned = 0.0033953 Jy ! Component: 200 - total flux cleaned = 0.00339551 Jy ! Total flux subtracted in 200 components = 0.00339551 Jy ! Clean residual min=-0.003070 max=0.002898 Jy/beam ! Clean residual mean=0.000001 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.142464 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.142464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148054Jy sigma=0.000665 ! Fit after self-cal, rms=0.148037Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148037Jy sigma=0.000665 ! Fit after self-cal, rms=0.149360Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=7.825 mas, bpa=-2.394 degrees ! Estimated noise=1356.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105886 Jy ! Component: 100 - total flux cleaned = 0.00106029 Jy ! Component: 150 - total flux cleaned = 0.000852506 Jy ! Component: 200 - total flux cleaned = 0.000803348 Jy ! Total flux subtracted in 200 components = 0.000803348 Jy ! Clean residual min=-0.002959 max=0.002856 Jy/beam ! Clean residual mean=0.000001 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.143267 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 0.143267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149295Jy sigma=0.000665 ! Fit after self-cal, rms=0.149308Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111711 Jy ! Component: 100 - total flux cleaned = 1.62664e-05 Jy ! Component: 150 - total flux cleaned = -0.00012042 Jy ! Component: 200 - total flux cleaned = -0.000207621 Jy ! Total flux subtracted in 200 components = -0.000207621 Jy ! Clean residual min=-0.002923 max=0.002839 Jy/beam ! Clean residual mean=0.000001 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.14306 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.14306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149263Jy sigma=0.000665 ! Fit after self-cal, rms=0.149259Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149259Jy sigma=0.000665 ! Fit after self-cal, rms=0.149084Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.731 mas, bmaj=15.55 mas, bpa=2.654 degrees ! Estimated noise=1610.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00067696 Jy ! Component: 100 - total flux cleaned = -0.000758451 Jy ! Component: 150 - total flux cleaned = -0.000879521 Jy ! Component: 200 - total flux cleaned = -0.00102852 Jy ! Total flux subtracted in 200 components = -0.00102852 Jy ! Clean residual min=-0.002751 max=0.002469 Jy/beam ! Clean residual mean=0.000006 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.142031 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 0.142031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149085Jy sigma=0.000665 ! Fit after self-cal, rms=0.149088Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197 Jy ! Component: 100 - total flux cleaned = -0.000312793 Jy ! Component: 150 - total flux cleaned = -0.000457313 Jy ! Component: 200 - total flux cleaned = -0.000508712 Jy ! Total flux subtracted in 200 components = -0.000508712 Jy ! Clean residual min=-0.002732 max=0.002443 Jy/beam ! Clean residual mean=0.000007 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.141523 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 111 components and 0.141523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149087Jy sigma=0.000665 ! Fit after self-cal, rms=0.149085Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=7.822 mas, bpa=-2.391 degrees ! Estimated noise=1354.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 7.822 at -2.391 degrees (North through East) ! Clean map min=-0.0033466 max=0.11697 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.816 mas, bmaj=6.86 mas, bpa=-3.906 degrees ! Estimated noise=2039.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0906601 Jy ! Component: 100 - total flux cleaned = 0.11427 Jy ! Component: 150 - total flux cleaned = 0.12337 Jy ! Component: 200 - total flux cleaned = 0.127471 Jy ! Total flux subtracted in 200 components = 0.127471 Jy ! Clean residual min=-0.005822 max=0.005853 Jy/beam ! Clean residual mean=0.000002 rms=0.001393 Jy/beam ! Combined flux in latest and established models = 0.127471 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.127471 Jy ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=7.822 mas, bpa=-2.391 degrees ! Estimated noise=1354.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624462 Jy ! Component: 100 - total flux cleaned = 0.0101717 Jy ! Component: 150 - total flux cleaned = 0.0125251 Jy ! Component: 200 - total flux cleaned = 0.0135523 Jy ! Total flux subtracted in 200 components = 0.0135523 Jy ! Clean residual min=-0.003206 max=0.002967 Jy/beam ! Clean residual mean=-0.000001 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.141023 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 44 components and 0.141023 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.731 mas, bmaj=15.55 mas, bpa=2.654 degrees ! Estimated noise=1610.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000873478 Jy ! Component: 100 - total flux cleaned = 0.000926358 Jy ! Component: 150 - total flux cleaned = 0.000929522 Jy ! Component: 200 - total flux cleaned = 0.000968991 Jy ! Total flux subtracted in 200 components = 0.000968991 Jy ! Clean residual min=-0.002892 max=0.002632 Jy/beam ! Clean residual mean=0.000003 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.141992 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109284 Jy ! Component: 100 - total flux cleaned = -0.000207847 Jy ! Component: 150 - total flux cleaned = -0.000297378 Jy ! Component: 200 - total flux cleaned = -0.000352622 Jy ! Total flux subtracted in 200 components = -0.000352622 Jy ! Clean residual min=-0.002813 max=0.002549 Jy/beam ! Clean residual mean=0.000005 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.14164 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 79 components and 0.14164 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=7.822 mas, bpa=-2.391 degrees ! Estimated noise=1354.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155807 Jy ! Component: 100 - total flux cleaned = -0.0003819 Jy ! Component: 150 - total flux cleaned = -0.000579173 Jy ! Component: 200 - total flux cleaned = -0.000459986 Jy ! Total flux subtracted in 200 components = -0.000459986 Jy ! Clean residual min=-0.002990 max=0.002824 Jy/beam ! Clean residual mean=0.000002 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.14118 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 99 components and 0.14118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149186Jy sigma=0.000665 ! Fit after self-cal, rms=0.149186Jy sigma=0.000665 wmodel J0119-1654_S_2017_05_01_pus_map.mod ! Writing 99 model components to file: J0119-1654_S_2017_05_01_pus_map.mod wobs J0119-1654_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0119-1654_S_2017_05_01_pus_uvs.fits wwins J0119-1654_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J0119-1654_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000660675 Jy ! Component: 100 - total flux cleaned = -0.000812204 Jy ! Component: 150 - total flux cleaned = -0.000857315 Jy ! Component: 200 - total flux cleaned = -0.000678518 Jy ! Component: 250 - total flux cleaned = -0.000420491 Jy ! Component: 300 - total flux cleaned = -0.000253012 Jy ! Component: 350 - total flux cleaned = -0.000293597 Jy ! Component: 400 - total flux cleaned = -0.000453123 Jy ! Component: 450 - total flux cleaned = -0.000647795 Jy ! Component: 500 - total flux cleaned = -0.000762201 Jy ! Component: 550 - total flux cleaned = -0.00083731 Jy ! Component: 600 - total flux cleaned = -0.000837426 Jy ! Component: 650 - total flux cleaned = -0.000946129 Jy ! Component: 700 - total flux cleaned = -0.000874807 Jy ! Component: 750 - total flux cleaned = -0.000910157 Jy ! Component: 800 - total flux cleaned = -0.000736627 Jy ! Component: 850 - total flux cleaned = -0.000702703 Jy ! Component: 900 - total flux cleaned = -0.000567451 Jy ! Component: 950 - total flux cleaned = -0.000567111 Jy ! Component: 1000 - total flux cleaned = -0.000435332 Jy ! Component: 1050 - total flux cleaned = -0.000435275 Jy ! Component: 1100 - total flux cleaned = -0.000339359 Jy ! Component: 1150 - total flux cleaned = -0.000275999 Jy ! Component: 1200 - total flux cleaned = -0.000182354 Jy ! Component: 1250 - total flux cleaned = -0.000151405 Jy ! Component: 1300 - total flux cleaned = -6.00954e-05 Jy ! Component: 1350 - total flux cleaned = -6.02113e-05 Jy ! Component: 1400 - total flux cleaned = 2.91982e-05 Jy ! Component: 1450 - total flux cleaned = 0.000146378 Jy ! Component: 1500 - total flux cleaned = 5.93672e-05 Jy ! Component: 1550 - total flux cleaned = 0.000174689 Jy ! Component: 1600 - total flux cleaned = 0.000117709 Jy ! Component: 1650 - total flux cleaned = 0.000286799 Jy ! Component: 1700 - total flux cleaned = 0.000286475 Jy ! Component: 1750 - total flux cleaned = 0.000258676 Jy ! Component: 1800 - total flux cleaned = 0.000258911 Jy ! Component: 1850 - total flux cleaned = 0.000285366 Jy ! Component: 1900 - total flux cleaned = 0.000204574 Jy ! Component: 1950 - total flux cleaned = 0.000230756 Jy ! Component: 2000 - total flux cleaned = 0.000151548 Jy ! Component: 2050 - total flux cleaned = 9.93229e-05 Jy ! Component: 2100 - total flux cleaned = 9.94889e-05 Jy ! Component: 2150 - total flux cleaned = -2.92106e-05 Jy ! Component: 2200 - total flux cleaned = -8.03447e-05 Jy ! Component: 2250 - total flux cleaned = -8.06555e-05 Jy ! Component: 2300 - total flux cleaned = -0.000206241 Jy ! Component: 2350 - total flux cleaned = -0.000181241 Jy ! Component: 2400 - total flux cleaned = -0.000354114 Jy ! Component: 2450 - total flux cleaned = -0.00030492 Jy ! Component: 2500 - total flux cleaned = -0.000377984 Jy ! Component: 2550 - total flux cleaned = -0.00049888 Jy ! Component: 2600 - total flux cleaned = -0.000426601 Jy ! Component: 2650 - total flux cleaned = -0.000474562 Jy ! Component: 2700 - total flux cleaned = -0.000639927 Jy ! Component: 2750 - total flux cleaned = -0.000639857 Jy ! Component: 2800 - total flux cleaned = -0.000779859 Jy ! Component: 2850 - total flux cleaned = -0.000779702 Jy ! Component: 2900 - total flux cleaned = -0.000848898 Jy ! Component: 2950 - total flux cleaned = -0.000940413 Jy ! Component: 3000 - total flux cleaned = -0.000986069 Jy ! Component: 3050 - total flux cleaned = -0.00114391 Jy ! Component: 3100 - total flux cleaned = -0.00118863 Jy ! Component: 3150 - total flux cleaned = -0.0012776 Jy ! Component: 3200 - total flux cleaned = -0.0013216 Jy ! Component: 3250 - total flux cleaned = -0.00136567 Jy ! Component: 3300 - total flux cleaned = -0.00145287 Jy ! Component: 3350 - total flux cleaned = -0.0015396 Jy ! Component: 3400 - total flux cleaned = -0.00156103 Jy ! Component: 3450 - total flux cleaned = -0.00158245 Jy ! Component: 3500 - total flux cleaned = -0.00164617 Jy ! Component: 3550 - total flux cleaned = -0.0016038 Jy ! Component: 3600 - total flux cleaned = -0.0016458 Jy ! Component: 3650 - total flux cleaned = -0.00162483 Jy ! Component: 3700 - total flux cleaned = -0.0016873 Jy ! Component: 3750 - total flux cleaned = -0.00170793 Jy ! Component: 3800 - total flux cleaned = -0.00166702 Jy ! Component: 3850 - total flux cleaned = -0.00170775 Jy ! Component: 3900 - total flux cleaned = -0.0017484 Jy ! Component: 3950 - total flux cleaned = -0.00176877 Jy ! Component: 4000 - total flux cleaned = -0.00176862 Jy ! Component: 4050 - total flux cleaned = -0.00176865 Jy ! Total flux subtracted in 4096 components = -0.00176856 Jy ! Clean residual min=-0.001369 max=0.000990 Jy/beam ! Clean residual mean=0.000002 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.139411 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 381 components and 0.139411 Jy ![Exited script file: muppet] wmap "J0119-1654_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 7.822 at -2.391 degrees (North through East) ! Clean map min=-0.0027268 max=0.11756 Jy/beam ! Writing clean map to FITS file: J0119-1654_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117562 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000355256 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.906559 0.906559 1.81312 3.62624 7.25247 14.5049 29.0099 58.0198 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 7.822 at -2.391 degrees (North through East) ! Clean map min=-0.0027268 max=0.11756 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0119-1654_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:24:25 2019