! Started logfile: J0118-2141_S_2017_10_09_pus_uvs.log on Sun May 12 13:02:16 2019 obs J0118-2141_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0118-2141_S_2017_10_09_pus_uva.fits ! AN table 1: 25 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.364444 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0118-2141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0118-2141_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.472236Jy sigma=0.003180 ! Fit after self-cal, rms=0.411670Jy sigma=0.002739 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.88 mas, bmaj=19.31 mas, bpa=-9.692 degrees ! Estimated noise=3885.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.694257 Jy ! Component: 100 - total flux cleaned = 0.920703 Jy ! Total flux subtracted in 100 components = 0.920703 Jy ! Clean residual min=-0.089484 max=0.132432 Jy/beam ! Clean residual mean=0.000475 rms=0.034429 Jy/beam ! Combined flux in latest and established models = 0.920703 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.920703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360886Jy sigma=0.002311 ! Fit after self-cal, rms=0.360846Jy sigma=0.002311 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.445 mas, bmaj=21.17 mas, bpa=-10.52 degrees ! Estimated noise=3460.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133347 Jy ! Component: 100 - total flux cleaned = 0.204324 Jy ! Component: 150 - total flux cleaned = 0.253532 Jy ! Component: 200 - total flux cleaned = 0.290265 Jy ! Total flux subtracted in 200 components = 0.290265 Jy ! Clean residual min=-0.087409 max=0.107499 Jy/beam ! Clean residual mean=0.000446 rms=0.030717 Jy/beam ! Combined flux in latest and established models = 1.21097 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 37 components and 1.21097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.297478Jy sigma=0.001953 ! Fit after self-cal, rms=0.297426Jy sigma=0.001953 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 0.87 HN 0.98 KP 1.06 ! LA 0.97 MK 1.00* NL 0.87 OV 1.00* ! PT 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 4.71 FD 0.94 HN 1.00 KP 1.03 ! LA 0.92 MK 1.00* NL 0.99 OV 1.00* ! PT 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.36 FD 0.97 HN 0.99 KP 0.90 ! LA 0.72 MK 1.00* NL 1.10 OV 1.00* ! PT 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.297426Jy sigma=0.001953 ! Fit after self-cal, rms=0.206380Jy sigma=0.001146 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.417 mas, bmaj=22.76 mas, bpa=-11.48 degrees ! Estimated noise=3612.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0407567 Jy ! Component: 100 - total flux cleaned = -0.0500429 Jy ! Component: 150 - total flux cleaned = -0.0569983 Jy ! Component: 200 - total flux cleaned = -0.060635 Jy ! Total flux subtracted in 200 components = -0.060635 Jy ! Clean residual min=-0.044010 max=0.034113 Jy/beam ! Clean residual mean=0.000070 rms=0.011327 Jy/beam ! Combined flux in latest and established models = 1.15033 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 1.15033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183100Jy sigma=0.000975 ! Fit after self-cal, rms=0.183419Jy sigma=0.000974 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183419Jy sigma=0.000974 ! Fit after self-cal, rms=0.165600Jy sigma=0.000797 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.421 mas, bmaj=22.19 mas, bpa=-11.3 degrees ! Estimated noise=3595.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0277339 Jy ! Component: 100 - total flux cleaned = -0.0361363 Jy ! Component: 150 - total flux cleaned = -0.0404361 Jy ! Component: 200 - total flux cleaned = -0.0439527 Jy ! Total flux subtracted in 200 components = -0.0439527 Jy ! Clean residual min=-0.030471 max=0.024678 Jy/beam ! Clean residual mean=0.000038 rms=0.007409 Jy/beam ! Combined flux in latest and established models = 1.10638 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 1.10638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156877Jy sigma=0.000740 ! Fit after self-cal, rms=0.156885Jy sigma=0.000739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00162928 Jy ! Component: 100 - total flux cleaned = -0.00413956 Jy ! Component: 150 - total flux cleaned = -0.00566246 Jy ! Component: 200 - total flux cleaned = -0.00616892 Jy ! Total flux subtracted in 200 components = -0.00616892 Jy ! Clean residual min=-0.028072 max=0.022318 Jy/beam ! Clean residual mean=0.000030 rms=0.007064 Jy/beam ! Combined flux in latest and established models = 1.10021 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 1.10021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155298Jy sigma=0.000728 ! Fit after self-cal, rms=0.155259Jy sigma=0.000728 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155259Jy sigma=0.000728 ! Fit after self-cal, rms=0.157856Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.411 mas, bmaj=22.38 mas, bpa=-11.6 degrees ! Estimated noise=3606.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0169684 Jy ! Component: 100 - total flux cleaned = -0.0223978 Jy ! Component: 150 - total flux cleaned = -0.0248925 Jy ! Component: 200 - total flux cleaned = -0.0254928 Jy ! Total flux subtracted in 200 components = -0.0254928 Jy ! Clean residual min=-0.024924 max=0.018807 Jy/beam ! Clean residual mean=0.000020 rms=0.005781 Jy/beam ! Combined flux in latest and established models = 1.07472 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 85 components and 1.07472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154451Jy sigma=0.000685 ! Fit after self-cal, rms=0.154433Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000738018 Jy ! Component: 100 - total flux cleaned = -0.00115624 Jy ! Component: 150 - total flux cleaned = -0.00151429 Jy ! Component: 200 - total flux cleaned = -0.00165311 Jy ! Total flux subtracted in 200 components = -0.00165311 Jy ! Clean residual min=-0.023397 max=0.017593 Jy/beam ! Clean residual mean=0.000014 rms=0.005606 Jy/beam ! Combined flux in latest and established models = 1.07307 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 92 components and 1.07307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153849Jy sigma=0.000680 ! Fit after self-cal, rms=0.153837Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153837Jy sigma=0.000680 ! Fit after self-cal, rms=0.155865Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.417 mas, bmaj=23.55 mas, bpa=-12.34 degrees ! Estimated noise=3938.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00752159 Jy ! Component: 100 - total flux cleaned = -0.0100167 Jy ! Component: 150 - total flux cleaned = -0.0117252 Jy ! Component: 200 - total flux cleaned = -0.0133869 Jy ! Total flux subtracted in 200 components = -0.0133869 Jy ! Clean residual min=-0.021667 max=0.017737 Jy/beam ! Clean residual mean=0.000008 rms=0.005402 Jy/beam ! Combined flux in latest and established models = 1.05968 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 99 components and 1.05968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154385Jy sigma=0.000661 ! Fit after self-cal, rms=0.154368Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113261 Jy ! Component: 100 - total flux cleaned = -0.00210824 Jy ! Component: 150 - total flux cleaned = -0.00308469 Jy ! Component: 200 - total flux cleaned = -0.00362313 Jy ! Total flux subtracted in 200 components = -0.00362313 Jy ! Clean residual min=-0.020930 max=0.016845 Jy/beam ! Clean residual mean=0.000007 rms=0.005353 Jy/beam ! Combined flux in latest and established models = 1.05606 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 1.05606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153922Jy sigma=0.000659 ! Fit after self-cal, rms=0.153907Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.407 mas, bmaj=22.55 mas, bpa=-11.83 degrees ! Estimated noise=3612.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.407 x 22.55 at -11.83 degrees (North through East) ! Clean map min=-0.020799 max=0.92776 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153907Jy sigma=0.000659 ! Fit after self-cal, rms=0.147928Jy sigma=0.000570 ! Inverting map and beam ! Estimated beam: bmin=5.404 mas, bmaj=22.66 mas, bpa=-11.95 degrees ! Estimated noise=3614.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00757435 Jy ! Component: 100 - total flux cleaned = -0.00909708 Jy ! Component: 150 - total flux cleaned = -0.00998493 Jy ! Component: 200 - total flux cleaned = -0.0105549 Jy ! Total flux subtracted in 200 components = -0.0105549 Jy ! Clean residual min=-0.018184 max=0.013378 Jy/beam ! Clean residual mean=-0.000000 rms=0.004205 Jy/beam ! Combined flux in latest and established models = 1.0455 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 120 components and 1.0455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146944Jy sigma=0.000563 ! Fit after self-cal, rms=0.146934Jy sigma=0.000563 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475244 Jy ! Component: 100 - total flux cleaned = -0.000766124 Jy ! Component: 150 - total flux cleaned = -0.000930809 Jy ! Component: 200 - total flux cleaned = -0.00100149 Jy ! Total flux subtracted in 200 components = -0.00100149 Jy ! Clean residual min=-0.017298 max=0.013297 Jy/beam ! Clean residual mean=-0.000000 rms=0.004155 Jy/beam ! Combined flux in latest and established models = 1.0445 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 135 components and 1.0445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146771Jy sigma=0.000562 ! Fit after self-cal, rms=0.146771Jy sigma=0.000562 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146771Jy sigma=0.000562 ! Fit after self-cal, rms=0.147927Jy sigma=0.000558 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.832 mas, bmaj=20.38 mas, bpa=-11.38 degrees ! Estimated noise=4051.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.719597 Jy ! Component: 100 - total flux cleaned = 0.89441 Jy ! Component: 150 - total flux cleaned = 0.960645 Jy ! Component: 200 - total flux cleaned = 0.99132 Jy ! Total flux subtracted in 200 components = 0.99132 Jy ! Clean residual min=-0.021997 max=0.017763 Jy/beam ! Clean residual mean=0.000040 rms=0.005753 Jy/beam ! Combined flux in latest and established models = 0.99132 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.99132 Jy ! Inverting map and beam ! Estimated beam: bmin=5.406 mas, bmaj=22.76 mas, bpa=-12.09 degrees ! Estimated noise=3618.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193445 Jy ! Component: 100 - total flux cleaned = 0.0285248 Jy ! Component: 150 - total flux cleaned = 0.0330067 Jy ! Component: 200 - total flux cleaned = 0.0349545 Jy ! Total flux subtracted in 200 components = 0.0349545 Jy ! Clean residual min=-0.017172 max=0.011501 Jy/beam ! Clean residual mean=0.000014 rms=0.004062 Jy/beam ! Combined flux in latest and established models = 1.02627 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 80 components and 1.02628 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.429 mas, bmaj=23.76 mas, bpa=-12.58 degrees ! Estimated noise=3940.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525079 Jy ! Component: 100 - total flux cleaned = 0.00681697 Jy ! Component: 150 - total flux cleaned = 0.00747628 Jy ! Component: 200 - total flux cleaned = 0.00766554 Jy ! Total flux subtracted in 200 components = 0.00766554 Jy ! Clean residual min=-0.017522 max=0.012575 Jy/beam ! Clean residual mean=0.000009 rms=0.004436 Jy/beam ! Combined flux in latest and established models = 1.03394 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.07267e-05 Jy ! Component: 100 - total flux cleaned = 0.000172778 Jy ! Component: 150 - total flux cleaned = 0.000326429 Jy ! Component: 200 - total flux cleaned = 0.000397756 Jy ! Total flux subtracted in 200 components = 0.000397756 Jy ! Clean residual min=-0.017203 max=0.012456 Jy/beam ! Clean residual mean=0.000008 rms=0.004392 Jy/beam ! Combined flux in latest and established models = 1.03434 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 100 components and 1.03434 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.406 mas, bmaj=22.76 mas, bpa=-12.09 degrees ! Estimated noise=3618.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000976926 Jy ! Component: 100 - total flux cleaned = -0.00158472 Jy ! Component: 150 - total flux cleaned = -0.00219683 Jy ! Component: 200 - total flux cleaned = -0.00257722 Jy ! Total flux subtracted in 200 components = -0.00257722 Jy ! Clean residual min=-0.015874 max=0.011076 Jy/beam ! Clean residual mean=0.000008 rms=0.003834 Jy/beam ! Combined flux in latest and established models = 1.03176 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 111 components and 1.03176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146808Jy sigma=0.000555 ! Fit after self-cal, rms=0.146806Jy sigma=0.000555 wmodel J0118-2141_S_2017_10_09_pus_map.mod ! Writing 111 model components to file: J0118-2141_S_2017_10_09_pus_map.mod wobs J0118-2141_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0118-2141_S_2017_10_09_pus_uvs.fits wwins J0118-2141_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0118-2141_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00688482 Jy ! Component: 100 - total flux cleaned = -0.0124696 Jy ! Component: 150 - total flux cleaned = -0.0161333 Jy ! Component: 200 - total flux cleaned = -0.0174994 Jy ! Component: 250 - total flux cleaned = -0.0189007 Jy ! Component: 300 - total flux cleaned = -0.0191981 Jy ! Component: 350 - total flux cleaned = -0.0193306 Jy ! Component: 400 - total flux cleaned = -0.0197032 Jy ! Component: 450 - total flux cleaned = -0.019932 Jy ! Component: 500 - total flux cleaned = -0.0201477 Jy ! Component: 550 - total flux cleaned = -0.0203546 Jy ! Component: 600 - total flux cleaned = -0.0211511 Jy ! Component: 650 - total flux cleaned = -0.0216254 Jy ! Component: 700 - total flux cleaned = -0.0219864 Jy ! Component: 750 - total flux cleaned = -0.0221622 Jy ! Component: 800 - total flux cleaned = -0.0224143 Jy ! Component: 850 - total flux cleaned = -0.0225739 Jy ! Component: 900 - total flux cleaned = -0.0227308 Jy ! Component: 950 - total flux cleaned = -0.0228075 Jy ! Component: 1000 - total flux cleaned = -0.022737 Jy ! Component: 1050 - total flux cleaned = -0.0226671 Jy ! Component: 1100 - total flux cleaned = -0.0223909 Jy ! Component: 1150 - total flux cleaned = -0.0218516 Jy ! Component: 1200 - total flux cleaned = -0.0215219 Jy ! Component: 1250 - total flux cleaned = -0.0211335 Jy ! Component: 1300 - total flux cleaned = -0.0207518 Jy ! Component: 1350 - total flux cleaned = -0.0204397 Jy ! Component: 1400 - total flux cleaned = -0.0201934 Jy ! Component: 1450 - total flux cleaned = -0.0200115 Jy ! Component: 1500 - total flux cleaned = -0.0198908 Jy ! Component: 1550 - total flux cleaned = -0.019712 Jy ! Component: 1600 - total flux cleaned = -0.019594 Jy ! Component: 1650 - total flux cleaned = -0.0195941 Jy ! Component: 1700 - total flux cleaned = -0.0195941 Jy ! Component: 1750 - total flux cleaned = -0.0195945 Jy ! Component: 1800 - total flux cleaned = -0.0195947 Jy ! Component: 1850 - total flux cleaned = -0.01948 Jy ! Component: 1900 - total flux cleaned = -0.0193646 Jy ! Component: 1950 - total flux cleaned = -0.0191908 Jy ! Component: 2000 - total flux cleaned = -0.0190745 Jy ! Component: 2050 - total flux cleaned = -0.0188398 Jy ! Component: 2100 - total flux cleaned = -0.0186624 Jy ! Component: 2150 - total flux cleaned = -0.0184249 Jy ! Component: 2200 - total flux cleaned = -0.0181853 Jy ! Component: 2250 - total flux cleaned = -0.0179436 Jy ! Component: 2300 - total flux cleaned = -0.0176998 Jy ! Component: 2350 - total flux cleaned = -0.0174534 Jy ! Component: 2400 - total flux cleaned = -0.0171421 Jy ! Component: 2450 - total flux cleaned = -0.016701 Jy ! Component: 2500 - total flux cleaned = -0.0163822 Jy ! Component: 2550 - total flux cleaned = -0.0160602 Jy ! Component: 2600 - total flux cleaned = -0.0157338 Jy ! Component: 2650 - total flux cleaned = -0.0152718 Jy ! Component: 2700 - total flux cleaned = -0.0149367 Jy ! Component: 2750 - total flux cleaned = -0.0145978 Jy ! Component: 2800 - total flux cleaned = -0.0143907 Jy ! Component: 2850 - total flux cleaned = -0.0140417 Jy ! Component: 2900 - total flux cleaned = -0.0137561 Jy ! Component: 2950 - total flux cleaned = -0.0135401 Jy ! Component: 3000 - total flux cleaned = -0.0131736 Jy ! Component: 3050 - total flux cleaned = -0.0128747 Jy ! Component: 3100 - total flux cleaned = -0.0126477 Jy ! Component: 3150 - total flux cleaned = -0.0122624 Jy ! Component: 3200 - total flux cleaned = -0.0119481 Jy ! Component: 3250 - total flux cleaned = -0.011708 Jy ! Component: 3300 - total flux cleaned = -0.0114632 Jy ! Component: 3350 - total flux cleaned = -0.0112974 Jy ! Component: 3400 - total flux cleaned = -0.0109581 Jy ! Component: 3450 - total flux cleaned = -0.0107851 Jy ! Component: 3500 - total flux cleaned = -0.0106089 Jy ! Component: 3550 - total flux cleaned = -0.0103395 Jy ! Component: 3600 - total flux cleaned = -0.0101556 Jy ! Component: 3650 - total flux cleaned = -0.00987429 Jy ! Component: 3700 - total flux cleaned = -0.00968371 Jy ! Component: 3750 - total flux cleaned = -0.00939138 Jy ! Component: 3800 - total flux cleaned = -0.0091931 Jy ! Component: 3850 - total flux cleaned = -0.00898983 Jy ! Component: 3900 - total flux cleaned = -0.00878194 Jy ! Component: 3950 - total flux cleaned = -0.00867518 Jy ! Component: 4000 - total flux cleaned = -0.00845851 Jy ! Component: 4050 - total flux cleaned = -0.00834747 Jy ! Total flux subtracted in 4096 components = -0.00800833 Jy ! Clean residual min=-0.006320 max=0.006318 Jy/beam ! Clean residual mean=-0.000006 rms=0.001902 Jy/beam ! Combined flux in latest and established models = 1.02375 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 401 components and 1.02375 Jy ![Exited script file: muppet] wmap "J0118-2141_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.406 x 22.76 at -12.09 degrees (North through East) ! Clean map min=-0.021137 max=0.93196 Jy/beam ! Writing clean map to FITS file: J0118-2141_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.931958 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00207658 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.668458 0.668458 1.33692 2.67383 5.34767 10.6953 21.3907 42.7813 85.5626 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0062 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.931 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.406 x 22.76 at -12.09 degrees (North through East) ! Clean map min=-0.021137 max=0.93196 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0118-2141_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:02:20 2019