! Started logfile: J0118-2141_S_2017_08_12_pus_uvs.log on Fri May 10 14:49:20 2019 obs J0118-2141_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0118-2141_S_2017_08_12_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.391453 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0118-2141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0118-2141_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.243552Jy sigma=0.001659 ! Fit after self-cal, rms=0.188221Jy sigma=0.001243 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.394 mas, bmaj=6.465 mas, bpa=-5.348 degrees ! Estimated noise=3674.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.812094 Jy ! Component: 100 - total flux cleaned = 0.989231 Jy ! Total flux subtracted in 100 components = 0.989231 Jy ! Clean residual min=-0.043968 max=0.062711 Jy/beam ! Clean residual mean=-0.000112 rms=0.014751 Jy/beam ! Combined flux in latest and established models = 0.989231 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.989231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191574Jy sigma=0.001275 ! Fit after self-cal, rms=0.191574Jy sigma=0.001275 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.756 mas, bmaj=7.299 mas, bpa=-5.848 degrees ! Estimated noise=2796.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0629067 Jy ! Component: 100 - total flux cleaned = 0.094335 Jy ! Component: 150 - total flux cleaned = 0.112305 Jy ! Component: 200 - total flux cleaned = 0.122958 Jy ! Total flux subtracted in 200 components = 0.122958 Jy ! Clean residual min=-0.033653 max=0.032524 Jy/beam ! Clean residual mean=-0.000015 rms=0.009144 Jy/beam ! Combined flux in latest and established models = 1.11219 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 1.11219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171689Jy sigma=0.001093 ! Fit after self-cal, rms=0.171677Jy sigma=0.001092 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.04 KP 1.07 ! LA 1.00 MK 0.99 NL 0.86 OV 1.01 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.07 KP 1.01 ! LA 0.97 MK 1.01 NL 1.01 OV 1.04 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.05 KP 1.00 ! LA 0.98 MK 1.04 NL 0.95 OV 0.95 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.171677Jy sigma=0.001092 ! Fit after self-cal, rms=0.091843Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=7.516 mas, bpa=-5.296 degrees ! Estimated noise=2811.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211844 Jy ! Component: 100 - total flux cleaned = -0.0023375 Jy ! Component: 150 - total flux cleaned = -0.00251385 Jy ! Component: 200 - total flux cleaned = -0.00285442 Jy ! Total flux subtracted in 200 components = -0.00285442 Jy ! Clean residual min=-0.007849 max=0.008103 Jy/beam ! Clean residual mean=0.000000 rms=0.002037 Jy/beam ! Combined flux in latest and established models = 1.10933 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 1.10934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090876Jy sigma=0.000663 ! Fit after self-cal, rms=0.090868Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090868Jy sigma=0.000663 ! Fit after self-cal, rms=0.090772Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=7.512 mas, bpa=-5.241 degrees ! Estimated noise=2809.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155207 Jy ! Component: 100 - total flux cleaned = -0.00167812 Jy ! Component: 150 - total flux cleaned = -0.00180467 Jy ! Component: 200 - total flux cleaned = -0.00203558 Jy ! Total flux subtracted in 200 components = -0.00203558 Jy ! Clean residual min=-0.007106 max=0.007409 Jy/beam ! Clean residual mean=0.000002 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 1.1073 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 1.1073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090366Jy sigma=0.000660 ! Fit after self-cal, rms=0.090350Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035772 Jy ! Component: 100 - total flux cleaned = -0.00045668 Jy ! Component: 150 - total flux cleaned = -0.000643177 Jy ! Component: 200 - total flux cleaned = -0.00081536 Jy ! Total flux subtracted in 200 components = -0.00081536 Jy ! Clean residual min=-0.007010 max=0.007093 Jy/beam ! Clean residual mean=0.000001 rms=0.001773 Jy/beam ! Combined flux in latest and established models = 1.10648 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 1.10648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090157Jy sigma=0.000658 ! Fit after self-cal, rms=0.090143Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090143Jy sigma=0.000658 ! Fit after self-cal, rms=0.090104Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=7.511 mas, bpa=-5.221 degrees ! Estimated noise=2807.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106825 Jy ! Component: 100 - total flux cleaned = -0.00113887 Jy ! Component: 150 - total flux cleaned = -0.00127338 Jy ! Component: 200 - total flux cleaned = -0.00140036 Jy ! Total flux subtracted in 200 components = -0.00140036 Jy ! Clean residual min=-0.006905 max=0.006788 Jy/beam ! Clean residual mean=0.000002 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 1.10508 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 1.10508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089993Jy sigma=0.000657 ! Fit after self-cal, rms=0.089983Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307836 Jy ! Component: 100 - total flux cleaned = -0.00030592 Jy ! Component: 150 - total flux cleaned = -0.000405701 Jy ! Component: 200 - total flux cleaned = -0.000453032 Jy ! Total flux subtracted in 200 components = -0.000453032 Jy ! Clean residual min=-0.006853 max=0.006611 Jy/beam ! Clean residual mean=0.000002 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 1.10463 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 1.10463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089927Jy sigma=0.000657 ! Fit after self-cal, rms=0.089919Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089919Jy sigma=0.000657 ! Fit after self-cal, rms=0.089900Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.943 mas, bmaj=16.91 mas, bpa=-3.999 degrees ! Estimated noise=3807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000506543 Jy ! Component: 100 - total flux cleaned = -0.000564507 Jy ! Component: 150 - total flux cleaned = -0.00061175 Jy ! Component: 200 - total flux cleaned = -0.000652915 Jy ! Total flux subtracted in 200 components = -0.000652915 Jy ! Clean residual min=-0.008792 max=0.007996 Jy/beam ! Clean residual mean=0.000008 rms=0.002908 Jy/beam ! Combined flux in latest and established models = 1.10398 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 1.10398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089900Jy sigma=0.000657 ! Fit after self-cal, rms=0.089866Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.15655e-05 Jy ! Component: 100 - total flux cleaned = -6.17163e-05 Jy ! Component: 150 - total flux cleaned = -0.000100434 Jy ! Component: 200 - total flux cleaned = -9.96814e-05 Jy ! Total flux subtracted in 200 components = -9.96814e-05 Jy ! Clean residual min=-0.008768 max=0.007903 Jy/beam ! Clean residual mean=0.000007 rms=0.002898 Jy/beam ! Combined flux in latest and established models = 1.10388 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 1.10388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089882Jy sigma=0.000657 ! Fit after self-cal, rms=0.089855Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=7.51 mas, bpa=-5.212 degrees ! Estimated noise=2806.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.775 x 7.51 at -5.212 degrees (North through East) ! Clean map min=-0.0063862 max=1.0448 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089855Jy sigma=0.000656 ! Fit after self-cal, rms=0.083022Jy sigma=0.000601 ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=7.51 mas, bpa=-5.183 degrees ! Estimated noise=2805.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000775536 Jy ! Component: 100 - total flux cleaned = -0.000774476 Jy ! Component: 150 - total flux cleaned = -0.000774066 Jy ! Component: 200 - total flux cleaned = -0.000804779 Jy ! Total flux subtracted in 200 components = -0.000804779 Jy ! Clean residual min=-0.006799 max=0.006089 Jy/beam ! Clean residual mean=0.000002 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 1.10307 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 1.10307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082993Jy sigma=0.000601 ! Fit after self-cal, rms=0.082988Jy sigma=0.000601 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.19815e-05 Jy ! Component: 100 - total flux cleaned = -0.000106542 Jy ! Component: 150 - total flux cleaned = -0.000130269 Jy ! Component: 200 - total flux cleaned = -0.000152413 Jy ! Total flux subtracted in 200 components = -0.000152413 Jy ! Clean residual min=-0.006795 max=0.006027 Jy/beam ! Clean residual mean=0.000002 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 1.10292 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 1.10292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082975Jy sigma=0.000601 ! Fit after self-cal, rms=0.082972Jy sigma=0.000601 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082972Jy sigma=0.000601 ! Fit after self-cal, rms=0.082963Jy sigma=0.000601 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=6.9 mas, bpa=-5.596 degrees ! Estimated noise=3566.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.814342 Jy ! Component: 100 - total flux cleaned = 0.992045 Jy ! Component: 150 - total flux cleaned = 1.04203 Jy ! Component: 200 - total flux cleaned = 1.06761 Jy ! Total flux subtracted in 200 components = 1.06761 Jy ! Clean residual min=-0.009236 max=0.012344 Jy/beam ! Clean residual mean=-0.000029 rms=0.002546 Jy/beam ! Combined flux in latest and established models = 1.06761 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.06761 Jy ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=7.511 mas, bpa=-5.183 degrees ! Estimated noise=2805.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174132 Jy ! Component: 100 - total flux cleaned = 0.0259847 Jy ! Component: 150 - total flux cleaned = 0.0304482 Jy ! Component: 200 - total flux cleaned = 0.0328269 Jy ! Total flux subtracted in 200 components = 0.0328269 Jy ! Clean residual min=-0.007053 max=0.005560 Jy/beam ! Clean residual mean=0.000002 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 1.10044 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 1.10044 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.944 mas, bmaj=16.91 mas, bpa=-3.99 degrees ! Estimated noise=3804.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228807 Jy ! Component: 100 - total flux cleaned = 0.00228983 Jy ! Component: 150 - total flux cleaned = 0.00232927 Jy ! Component: 200 - total flux cleaned = 0.0023918 Jy ! Total flux subtracted in 200 components = 0.0023918 Jy ! Clean residual min=-0.008597 max=0.007771 Jy/beam ! Clean residual mean=0.000010 rms=0.002873 Jy/beam ! Combined flux in latest and established models = 1.10283 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.5937e-05 Jy ! Component: 100 - total flux cleaned = 7.28953e-05 Jy ! Component: 150 - total flux cleaned = 9.45366e-05 Jy ! Component: 200 - total flux cleaned = 9.59714e-05 Jy ! Total flux subtracted in 200 components = 9.59714e-05 Jy ! Clean residual min=-0.008547 max=0.007657 Jy/beam ! Clean residual mean=0.000010 rms=0.002863 Jy/beam ! Combined flux in latest and established models = 1.10293 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 1.10293 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=7.511 mas, bpa=-5.183 degrees ! Estimated noise=2805.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000680664 Jy ! Component: 100 - total flux cleaned = -0.00068641 Jy ! Component: 150 - total flux cleaned = -0.000625125 Jy ! Component: 200 - total flux cleaned = -0.000646888 Jy ! Total flux subtracted in 200 components = -0.000646888 Jy ! Clean residual min=-0.006898 max=0.005472 Jy/beam ! Clean residual mean=0.000003 rms=0.001590 Jy/beam ! Combined flux in latest and established models = 1.10228 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 1.10228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082963Jy sigma=0.000601 ! Fit after self-cal, rms=0.082951Jy sigma=0.000601 wmodel J0118-2141_S_2017_08_12_pus_map.mod ! Writing 57 model components to file: J0118-2141_S_2017_08_12_pus_map.mod wobs J0118-2141_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0118-2141_S_2017_08_12_pus_uvs.fits wwins J0118-2141_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0118-2141_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00284805 Jy ! Component: 100 - total flux cleaned = -0.00365229 Jy ! Component: 150 - total flux cleaned = -0.00457404 Jy ! Component: 200 - total flux cleaned = -0.0051735 Jy ! Component: 250 - total flux cleaned = -0.00573673 Jy ! Component: 300 - total flux cleaned = -0.00626831 Jy ! Component: 350 - total flux cleaned = -0.00648146 Jy ! Component: 400 - total flux cleaned = -0.0065502 Jy ! Component: 450 - total flux cleaned = -0.00668063 Jy ! Component: 500 - total flux cleaned = -0.00661729 Jy ! Component: 550 - total flux cleaned = -0.00655701 Jy ! Component: 600 - total flux cleaned = -0.00661402 Jy ! Component: 650 - total flux cleaned = -0.00655888 Jy ! Component: 700 - total flux cleaned = -0.00655955 Jy ! Component: 750 - total flux cleaned = -0.00650706 Jy ! Component: 800 - total flux cleaned = -0.00650684 Jy ! Component: 850 - total flux cleaned = -0.00645905 Jy ! Component: 900 - total flux cleaned = -0.00655474 Jy ! Component: 950 - total flux cleaned = -0.00641807 Jy ! Component: 1000 - total flux cleaned = -0.00632919 Jy ! Component: 1050 - total flux cleaned = -0.00619922 Jy ! Component: 1100 - total flux cleaned = -0.00611397 Jy ! Component: 1150 - total flux cleaned = -0.00586493 Jy ! Component: 1200 - total flux cleaned = -0.00570302 Jy ! Component: 1250 - total flux cleaned = -0.00550495 Jy ! Component: 1300 - total flux cleaned = -0.0052331 Jy ! Component: 1350 - total flux cleaned = -0.00496648 Jy ! Component: 1400 - total flux cleaned = -0.00466767 Jy ! Component: 1450 - total flux cleaned = -0.0044476 Jy ! Component: 1500 - total flux cleaned = -0.00405089 Jy ! Component: 1550 - total flux cleaned = -0.00373206 Jy ! Component: 1600 - total flux cleaned = -0.00352269 Jy ! Component: 1650 - total flux cleaned = -0.00335067 Jy ! Component: 1700 - total flux cleaned = -0.00321524 Jy ! Component: 1750 - total flux cleaned = -0.0030481 Jy ! Component: 1800 - total flux cleaned = -0.00291616 Jy ! Component: 1850 - total flux cleaned = -0.00285058 Jy ! Component: 1900 - total flux cleaned = -0.00268909 Jy ! Component: 1950 - total flux cleaned = -0.00259319 Jy ! Component: 2000 - total flux cleaned = -0.00249801 Jy ! Component: 2050 - total flux cleaned = -0.00240335 Jy ! Component: 2100 - total flux cleaned = -0.00234056 Jy ! Component: 2150 - total flux cleaned = -0.00227815 Jy ! Component: 2200 - total flux cleaned = -0.00218488 Jy ! Component: 2250 - total flux cleaned = -0.00209205 Jy ! Component: 2300 - total flux cleaned = -0.00206118 Jy ! Component: 2350 - total flux cleaned = -0.00199945 Jy ! Component: 2400 - total flux cleaned = -0.0019377 Jy ! Component: 2450 - total flux cleaned = -0.00184519 Jy ! Component: 2500 - total flux cleaned = -0.00178334 Jy ! Component: 2550 - total flux cleaned = -0.00169046 Jy ! Component: 2600 - total flux cleaned = -0.00159744 Jy ! Component: 2650 - total flux cleaned = -0.0015042 Jy ! Component: 2700 - total flux cleaned = -0.00144178 Jy ! Component: 2750 - total flux cleaned = -0.00131706 Jy ! Component: 2800 - total flux cleaned = -0.00125453 Jy ! Component: 2850 - total flux cleaned = -0.00109757 Jy ! Component: 2900 - total flux cleaned = -0.00106608 Jy ! Component: 2950 - total flux cleaned = -0.000907903 Jy ! Component: 3000 - total flux cleaned = -0.000716509 Jy ! Component: 3050 - total flux cleaned = -0.000587857 Jy ! Component: 3100 - total flux cleaned = -0.000490436 Jy ! Component: 3150 - total flux cleaned = -0.000360316 Jy ! Component: 3200 - total flux cleaned = -0.000228868 Jy ! Component: 3250 - total flux cleaned = -6.35355e-05 Jy ! Component: 3300 - total flux cleaned = 6.9816e-05 Jy ! Component: 3350 - total flux cleaned = 0.000238089 Jy ! Component: 3400 - total flux cleaned = 0.000340066 Jy ! Component: 3450 - total flux cleaned = 0.000442754 Jy ! Component: 3500 - total flux cleaned = 0.000546525 Jy ! Component: 3550 - total flux cleaned = 0.000650879 Jy ! Component: 3600 - total flux cleaned = 0.000756952 Jy ! Component: 3650 - total flux cleaned = 0.00086392 Jy ! Component: 3700 - total flux cleaned = 0.000971884 Jy ! Component: 3750 - total flux cleaned = 0.00111685 Jy ! Component: 3800 - total flux cleaned = 0.00122655 Jy ! Component: 3850 - total flux cleaned = 0.00137499 Jy ! Component: 3900 - total flux cleaned = 0.00145005 Jy ! Component: 3950 - total flux cleaned = 0.00148762 Jy ! Component: 4000 - total flux cleaned = 0.00156429 Jy ! Component: 4050 - total flux cleaned = 0.00164219 Jy ! Total flux subtracted in 4096 components = 0.00164174 Jy ! Clean residual min=-0.002114 max=0.002315 Jy/beam ! Clean residual mean=0.000001 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 1.10392 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 286 components and 1.10392 Jy ![Exited script file: muppet] wmap "J0118-2141_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.775 x 7.511 at -5.183 degrees (North through East) ! Clean map min=-0.0078472 max=1.0461 Jy/beam ! Writing clean map to FITS file: J0118-2141_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.04614 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00068276 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.195794 0.195794 0.391589 0.783177 1.56635 3.13271 6.26542 12.5308 25.0617 50.1233 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.046 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.775 x 7.511 at -5.183 degrees (North through East) ! Clean map min=-0.0078472 max=1.0461 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0118-2141_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:49:24 2019