! Started logfile: J0118-2141_S_2017_06_15_pus_uvs.log on Tue May 7 15:07:46 2019 obs J0118-2141_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0118-2141_S_2017_06_15_pus_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.291253 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0118-2141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 2464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0118-2141_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 308 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 318 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 318 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 410 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.346595Jy sigma=0.002569 ! Fit after self-cal, rms=0.284594Jy sigma=0.002092 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.398 mas, bmaj=12.66 mas, bpa=-2.28 degrees ! Estimated noise=2713.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.771032 Jy ! Component: 100 - total flux cleaned = 0.943606 Jy ! Total flux subtracted in 100 components = 0.943606 Jy ! Clean residual min=-0.066453 max=0.121414 Jy/beam ! Clean residual mean=0.000917 rms=0.021477 Jy/beam ! Combined flux in latest and established models = 0.943606 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.943606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291434Jy sigma=0.002151 ! Fit after self-cal, rms=0.291433Jy sigma=0.002151 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.136 mas, bmaj=14.2 mas, bpa=-1.771 degrees ! Estimated noise=2273.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (58.5, -82.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127138 Jy ! Component: 100 - total flux cleaned = 0.162076 Jy ! Component: 150 - total flux cleaned = 0.171491 Jy ! Component: 200 - total flux cleaned = 0.17309 Jy ! Total flux subtracted in 200 components = 0.17309 Jy ! Clean residual min=-0.044127 max=0.084200 Jy/beam ! Clean residual mean=0.000466 rms=0.014616 Jy/beam ! Combined flux in latest and established models = 1.1167 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 1.1167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229577Jy sigma=0.001671 ! Fit after self-cal, rms=0.222658Jy sigma=0.001615 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.47 FD 0.91 HN 0.96 KP 1.00 ! LA 0.98 MK 1.01 NL 1.06 OV 0.97 ! PT 0.99 SC 0.87 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.87 FD 0.95 HN 1.04 KP 0.95 ! LA 0.95 MK 0.96 NL 1.11 OV 0.93 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.45 FD 0.99 HN 1.01 KP 0.95 ! LA 0.95 MK 0.98 NL 1.04 OV 0.89 ! PT 0.96 SC 0.90 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 1.00* ! LA 1.10 MK 0.79 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.222658Jy sigma=0.001615 ! Fit after self-cal, rms=0.161566Jy sigma=0.001023 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.032 mas, bmaj=14.41 mas, bpa=-1.413 degrees ! Estimated noise=2330.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0305093 Jy ! Component: 100 - total flux cleaned = -0.0363376 Jy ! Component: 150 - total flux cleaned = -0.0404257 Jy ! Component: 200 - total flux cleaned = -0.0433394 Jy ! Total flux subtracted in 200 components = -0.0433394 Jy ! Clean residual min=-0.026336 max=0.029631 Jy/beam ! Clean residual mean=0.000247 rms=0.007503 Jy/beam ! Combined flux in latest and established models = 1.07336 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 64 components and 1.07336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151898Jy sigma=0.000961 ! Fit after self-cal, rms=0.151620Jy sigma=0.000957 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151620Jy sigma=0.000957 ! Fit after self-cal, rms=0.123976Jy sigma=0.000753 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=14.39 mas, bpa=-1.438 degrees ! Estimated noise=2320.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373395 Jy ! Component: 100 - total flux cleaned = 0.000371606 Jy ! Component: 150 - total flux cleaned = 0.00107867 Jy ! Component: 200 - total flux cleaned = 0.00200163 Jy ! Total flux subtracted in 200 components = 0.00200163 Jy ! Clean residual min=-0.011286 max=0.010741 Jy/beam ! Clean residual mean=0.000024 rms=0.003053 Jy/beam ! Combined flux in latest and established models = 1.07536 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 80 components and 1.07536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120758Jy sigma=0.000731 ! Fit after self-cal, rms=0.120651Jy sigma=0.000730 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000903939 Jy ! Component: 100 - total flux cleaned = -0.000897818 Jy ! Component: 150 - total flux cleaned = -0.000891778 Jy ! Component: 200 - total flux cleaned = -0.00110278 Jy ! Total flux subtracted in 200 components = -0.00110278 Jy ! Clean residual min=-0.010929 max=0.010112 Jy/beam ! Clean residual mean=0.000037 rms=0.002843 Jy/beam ! Combined flux in latest and established models = 1.07426 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 94 components and 1.07426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119636Jy sigma=0.000722 ! Fit after self-cal, rms=0.119566Jy sigma=0.000722 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119566Jy sigma=0.000722 ! Fit after self-cal, rms=0.120397Jy sigma=0.000717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.05 mas, bmaj=14.37 mas, bpa=-1.45 degrees ! Estimated noise=2317.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00354809 Jy ! Component: 100 - total flux cleaned = -0.00297882 Jy ! Component: 150 - total flux cleaned = -0.00249385 Jy ! Component: 200 - total flux cleaned = -0.00249348 Jy ! Total flux subtracted in 200 components = -0.00249348 Jy ! Clean residual min=-0.009488 max=0.009022 Jy/beam ! Clean residual mean=0.000033 rms=0.002501 Jy/beam ! Combined flux in latest and established models = 1.07176 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 1.07176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119012Jy sigma=0.000708 ! Fit after self-cal, rms=0.118927Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000605036 Jy ! Component: 100 - total flux cleaned = -0.000221555 Jy ! Component: 150 - total flux cleaned = -4.5303e-05 Jy ! Component: 200 - total flux cleaned = 0.00011113 Jy ! Total flux subtracted in 200 components = 0.00011113 Jy ! Clean residual min=-0.009097 max=0.008851 Jy/beam ! Clean residual mean=0.000036 rms=0.002374 Jy/beam ! Combined flux in latest and established models = 1.07187 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 113 components and 1.07187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118342Jy sigma=0.000703 ! Fit after self-cal, rms=0.118292Jy sigma=0.000703 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118292Jy sigma=0.000703 ! Fit after self-cal, rms=0.119079Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.706 mas, bmaj=18.82 mas, bpa=-2.528 degrees ! Estimated noise=2802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023309 Jy ! Component: 100 - total flux cleaned = -0.00187682 Jy ! Component: 150 - total flux cleaned = -0.00149776 Jy ! Component: 200 - total flux cleaned = -0.0013306 Jy ! Total flux subtracted in 200 components = -0.0013306 Jy ! Clean residual min=-0.008565 max=0.008240 Jy/beam ! Clean residual mean=0.000040 rms=0.002512 Jy/beam ! Combined flux in latest and established models = 1.07054 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 119 components and 1.07054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118432Jy sigma=0.000697 ! Fit after self-cal, rms=0.118318Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000712684 Jy ! Component: 100 - total flux cleaned = -0.000431394 Jy ! Component: 150 - total flux cleaned = -0.000302274 Jy ! Component: 200 - total flux cleaned = -7.17551e-05 Jy ! Total flux subtracted in 200 components = -7.17551e-05 Jy ! Clean residual min=-0.008360 max=0.007842 Jy/beam ! Clean residual mean=0.000047 rms=0.002417 Jy/beam ! Combined flux in latest and established models = 1.07047 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 143 components and 1.07047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118115Jy sigma=0.000695 ! Fit after self-cal, rms=0.118050Jy sigma=0.000694 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.05 mas, bmaj=14.37 mas, bpa=-1.453 degrees ! Estimated noise=2315.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.05 x 14.37 at -1.453 degrees (North through East) ! Clean map min=-0.021085 max=0.94631 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118050Jy sigma=0.000694 ! Fit after self-cal, rms=0.111784Jy sigma=0.000637 ! Inverting map and beam ! Estimated beam: bmin=4.042 mas, bmaj=14.37 mas, bpa=-1.492 degrees ! Estimated noise=2310.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00283182 Jy ! Component: 100 - total flux cleaned = -0.00300762 Jy ! Component: 150 - total flux cleaned = -0.00300236 Jy ! Component: 200 - total flux cleaned = -0.00300645 Jy ! Total flux subtracted in 200 components = -0.00300645 Jy ! Clean residual min=-0.007270 max=0.007785 Jy/beam ! Clean residual mean=0.000035 rms=0.002025 Jy/beam ! Combined flux in latest and established models = 1.06747 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 162 components and 1.06747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111187Jy sigma=0.000633 ! Fit after self-cal, rms=0.111134Jy sigma=0.000632 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000862828 Jy ! Component: 100 - total flux cleaned = -0.000737945 Jy ! Component: 150 - total flux cleaned = -0.000738989 Jy ! Component: 200 - total flux cleaned = -0.000848852 Jy ! Total flux subtracted in 200 components = -0.000848852 Jy ! Clean residual min=-0.006987 max=0.007700 Jy/beam ! Clean residual mean=0.000043 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 1.06662 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 173 components and 1.06662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110840Jy sigma=0.000630 ! Fit after self-cal, rms=0.110809Jy sigma=0.000630 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110809Jy sigma=0.000630 ! Fit after self-cal, rms=0.111279Jy sigma=0.000629 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=12.87 mas, bpa=-2.402 degrees ! Estimated noise=2759.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.776784 Jy ! Component: 100 - total flux cleaned = 0.949594 Jy ! Component: 150 - total flux cleaned = 1.00127 Jy ! Component: 200 - total flux cleaned = 1.02728 Jy ! Total flux subtracted in 200 components = 1.02728 Jy ! Clean residual min=-0.012327 max=0.016102 Jy/beam ! Clean residual mean=0.000153 rms=0.003612 Jy/beam ! Combined flux in latest and established models = 1.02728 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 1.02728 Jy ! Inverting map and beam ! Estimated beam: bmin=4.044 mas, bmaj=14.37 mas, bpa=-1.493 degrees ! Estimated noise=2308.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215922 Jy ! Component: 100 - total flux cleaned = 0.0277559 Jy ! Component: 150 - total flux cleaned = 0.0306319 Jy ! Component: 200 - total flux cleaned = 0.0325926 Jy ! Total flux subtracted in 200 components = 0.0325926 Jy ! Clean residual min=-0.007439 max=0.008481 Jy/beam ! Clean residual mean=0.000073 rms=0.002131 Jy/beam ! Combined flux in latest and established models = 1.05987 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 71 components and 1.05987 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.689 mas, bmaj=18.83 mas, bpa=-2.604 degrees ! Estimated noise=2797.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372777 Jy ! Component: 100 - total flux cleaned = 0.00430312 Jy ! Component: 150 - total flux cleaned = 0.00431064 Jy ! Component: 200 - total flux cleaned = 0.00404098 Jy ! Total flux subtracted in 200 components = 0.00404098 Jy ! Clean residual min=-0.007644 max=0.007731 Jy/beam ! Clean residual mean=0.000078 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 1.06391 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117495 Jy ! Component: 100 - total flux cleaned = -0.000219721 Jy ! Component: 150 - total flux cleaned = -0.000219709 Jy ! Component: 200 - total flux cleaned = -0.000225135 Jy ! Total flux subtracted in 200 components = -0.000225135 Jy ! Clean residual min=-0.007116 max=0.007567 Jy/beam ! Clean residual mean=0.000079 rms=0.002201 Jy/beam ! Combined flux in latest and established models = 1.06368 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 98 components and 1.06368 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.044 mas, bmaj=14.37 mas, bpa=-1.493 degrees ! Estimated noise=2308.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000412351 Jy ! Component: 100 - total flux cleaned = -0.000399151 Jy ! Component: 150 - total flux cleaned = -0.000502373 Jy ! Component: 200 - total flux cleaned = -0.000694382 Jy ! Total flux subtracted in 200 components = -0.000694382 Jy ! Clean residual min=-0.006185 max=0.007166 Jy/beam ! Clean residual mean=0.000047 rms=0.001816 Jy/beam ! Combined flux in latest and established models = 1.06299 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 1.06299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110802Jy sigma=0.000626 ! Fit after self-cal, rms=0.110573Jy sigma=0.000624 wmodel J0118-2141_S_2017_06_15_pus_map.mod ! Writing 121 model components to file: J0118-2141_S_2017_06_15_pus_map.mod wobs J0118-2141_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0118-2141_S_2017_06_15_pus_uvs.fits wwins J0118-2141_S_2017_06_15_pus_map.win ! wwins: Wrote 2 windows to J0118-2141_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242231 Jy ! Component: 100 - total flux cleaned = 0.00242169 Jy ! Component: 150 - total flux cleaned = 0.00262325 Jy ! Component: 200 - total flux cleaned = 0.00262143 Jy ! Component: 250 - total flux cleaned = 0.00262224 Jy ! Component: 300 - total flux cleaned = 0.00235321 Jy ! Component: 350 - total flux cleaned = 0.00209438 Jy ! Component: 400 - total flux cleaned = 0.00176202 Jy ! Component: 450 - total flux cleaned = 0.00176489 Jy ! Component: 500 - total flux cleaned = 0.00184347 Jy ! Component: 550 - total flux cleaned = 0.00176477 Jy ! Component: 600 - total flux cleaned = 0.00183759 Jy ! Component: 650 - total flux cleaned = 0.00190786 Jy ! Component: 700 - total flux cleaned = 0.0019083 Jy ! Component: 750 - total flux cleaned = 0.00225398 Jy ! Component: 800 - total flux cleaned = 0.00238874 Jy ! Component: 850 - total flux cleaned = 0.00265189 Jy ! Component: 900 - total flux cleaned = 0.00271636 Jy ! Component: 950 - total flux cleaned = 0.0030317 Jy ! Component: 1000 - total flux cleaned = 0.00309354 Jy ! Component: 1050 - total flux cleaned = 0.00315411 Jy ! Component: 1100 - total flux cleaned = 0.00339156 Jy ! Component: 1150 - total flux cleaned = 0.00362316 Jy ! Component: 1200 - total flux cleaned = 0.00373553 Jy ! Component: 1250 - total flux cleaned = 0.00390215 Jy ! Component: 1300 - total flux cleaned = 0.00395635 Jy ! Component: 1350 - total flux cleaned = 0.00416941 Jy ! Component: 1400 - total flux cleaned = 0.00437994 Jy ! Component: 1450 - total flux cleaned = 0.00448413 Jy ! Component: 1500 - total flux cleaned = 0.00458643 Jy ! Component: 1550 - total flux cleaned = 0.00478755 Jy ! Component: 1600 - total flux cleaned = 0.00498585 Jy ! Component: 1650 - total flux cleaned = 0.00523087 Jy ! Component: 1700 - total flux cleaned = 0.00532758 Jy ! Component: 1750 - total flux cleaned = 0.00570765 Jy ! Component: 1800 - total flux cleaned = 0.00570666 Jy ! Component: 1850 - total flux cleaned = 0.00598516 Jy ! Component: 1900 - total flux cleaned = 0.00607614 Jy ! Component: 1950 - total flux cleaned = 0.00612169 Jy ! Component: 2000 - total flux cleaned = 0.0062114 Jy ! Component: 2050 - total flux cleaned = 0.00616689 Jy ! Component: 2100 - total flux cleaned = 0.00638447 Jy ! Component: 2150 - total flux cleaned = 0.00642691 Jy ! Component: 2200 - total flux cleaned = 0.00659785 Jy ! Component: 2250 - total flux cleaned = 0.00672386 Jy ! Component: 2300 - total flux cleaned = 0.0068489 Jy ! Component: 2350 - total flux cleaned = 0.00689056 Jy ! Component: 2400 - total flux cleaned = 0.00701365 Jy ! Component: 2450 - total flux cleaned = 0.00709412 Jy ! Component: 2500 - total flux cleaned = 0.00709354 Jy ! Component: 2550 - total flux cleaned = 0.00713296 Jy ! Component: 2600 - total flux cleaned = 0.00717282 Jy ! Component: 2650 - total flux cleaned = 0.00736665 Jy ! Component: 2700 - total flux cleaned = 0.00744306 Jy ! Component: 2750 - total flux cleaned = 0.00744304 Jy ! Component: 2800 - total flux cleaned = 0.00751857 Jy ! Component: 2850 - total flux cleaned = 0.00766808 Jy ! Component: 2900 - total flux cleaned = 0.00759397 Jy ! Component: 2950 - total flux cleaned = 0.00766729 Jy ! Component: 3000 - total flux cleaned = 0.00763142 Jy ! Component: 3050 - total flux cleaned = 0.00777575 Jy ! Component: 3100 - total flux cleaned = 0.0078471 Jy ! Component: 3150 - total flux cleaned = 0.00777609 Jy ! Component: 3200 - total flux cleaned = 0.00781147 Jy ! Component: 3250 - total flux cleaned = 0.00784634 Jy ! Component: 3300 - total flux cleaned = 0.00788109 Jy ! Component: 3350 - total flux cleaned = 0.007881 Jy ! Component: 3400 - total flux cleaned = 0.00777859 Jy ! Component: 3450 - total flux cleaned = 0.00788056 Jy ! Component: 3500 - total flux cleaned = 0.00808244 Jy ! Component: 3550 - total flux cleaned = 0.00801518 Jy ! Component: 3600 - total flux cleaned = 0.00814807 Jy ! Component: 3650 - total flux cleaned = 0.0081477 Jy ! Component: 3700 - total flux cleaned = 0.0082462 Jy ! Component: 3750 - total flux cleaned = 0.00837672 Jy ! Component: 3800 - total flux cleaned = 0.0084412 Jy ! Component: 3850 - total flux cleaned = 0.00853767 Jy ! Component: 3900 - total flux cleaned = 0.00863334 Jy ! Component: 3950 - total flux cleaned = 0.008665 Jy ! Component: 4000 - total flux cleaned = 0.00866468 Jy ! Component: 4050 - total flux cleaned = 0.00885384 Jy ! Total flux subtracted in 4096 components = 0.00882234 Jy ! Clean residual min=-0.001766 max=0.002054 Jy/beam ! Clean residual mean=0.000008 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 1.07181 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 415 components and 1.07181 Jy ![Exited script file: muppet] wmap "J0118-2141_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.044 x 14.37 at -1.493 degrees (North through East) ! Clean map min=-0.017335 max=0.95342 Jy/beam ! Writing clean map to FITS file: J0118-2141_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.953419 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000575257 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.181009 0.181009 0.362018 0.724035 1.44807 2.89614 5.79228 11.5846 23.1691 46.3383 92.6765 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.953 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.044 x 14.37 at -1.493 degrees (North through East) ! Clean map min=-0.017335 max=0.95342 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0118-2141_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:07:51 2019