! Started logfile: J0118-2141_S_2017_04_28_pus_uvs.log on Thu May 2 16:14:47 2019 obs J0118-2141_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0118-2141_S_2017_04_28_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.416667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0118-2141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0118-2141_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.523718Jy sigma=0.001811 ! Fit after self-cal, rms=0.515129Jy sigma=0.001764 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.93 mas, bmaj=12.7 mas, bpa=4.2 degrees ! Estimated noise=8787.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07437 Jy ! Component: 100 - total flux cleaned = 1.30865 Jy ! Total flux subtracted in 100 components = 1.30865 Jy ! Clean residual min=-0.077350 max=0.086363 Jy/beam ! Clean residual mean=0.000050 rms=0.027234 Jy/beam ! Combined flux in latest and established models = 1.30865 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1.30865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335331Jy sigma=0.001002 ! Fit after self-cal, rms=0.335331Jy sigma=0.001002 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.576 mas, bmaj=13.77 mas, bpa=8.715 degrees ! Estimated noise=7199.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449402 Jy ! Component: 100 - total flux cleaned = 0.0546054 Jy ! Component: 150 - total flux cleaned = 0.0572916 Jy ! Component: 200 - total flux cleaned = 0.0588023 Jy ! Total flux subtracted in 200 components = 0.0588023 Jy ! Clean residual min=-0.068669 max=0.051143 Jy/beam ! Clean residual mean=-0.000624 rms=0.016996 Jy/beam ! Combined flux in latest and established models = 1.36745 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.36745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322982Jy sigma=0.000979 ! Fit after self-cal, rms=0.322858Jy sigma=0.000978 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 1.00* KP 1.09 ! LA 1.01 MK 1.03 NL 1.00* OV 1.03 ! PT 1.10 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.86 HN 1.00* KP 1.06 ! LA 0.99 MK 1.00 NL 1.00* OV 1.07 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 1.00* KP 1.06 ! LA 0.97 MK 1.02 NL 1.00* OV 0.97 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.92 HN 1.00* KP 1.00* ! LA 0.56 MK 0.94 NL 1.00* OV 1.00* ! PT 1.09 SC 1.00* ! ! ! Fit before self-cal, rms=0.322858Jy sigma=0.000978 ! Fit after self-cal, rms=0.165375Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.522 mas, bmaj=13.74 mas, bpa=8.631 degrees ! Estimated noise=7219.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139026 Jy ! Component: 100 - total flux cleaned = 0.0180695 Jy ! Component: 150 - total flux cleaned = 0.0186673 Jy ! Component: 200 - total flux cleaned = 0.0193344 Jy ! Total flux subtracted in 200 components = 0.0193344 Jy ! Clean residual min=-0.013597 max=0.014674 Jy/beam ! Clean residual mean=-0.000920 rms=0.003904 Jy/beam ! Combined flux in latest and established models = 1.38679 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 1.38679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164029Jy sigma=0.000682 ! Fit after self-cal, rms=0.163784Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163784Jy sigma=0.000682 ! Fit after self-cal, rms=0.163688Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.515 mas, bmaj=13.72 mas, bpa=8.615 degrees ! Estimated noise=7213.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489927 Jy ! Component: 100 - total flux cleaned = 0.00517106 Jy ! Component: 150 - total flux cleaned = 0.005268 Jy ! Component: 200 - total flux cleaned = 0.00535286 Jy ! Total flux subtracted in 200 components = 0.00535286 Jy ! Clean residual min=-0.012369 max=0.014408 Jy/beam ! Clean residual mean=-0.000878 rms=0.003618 Jy/beam ! Combined flux in latest and established models = 1.39214 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 1.39214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163435Jy sigma=0.000681 ! Fit after self-cal, rms=0.163424Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572676 Jy ! Component: 100 - total flux cleaned = 0.000572998 Jy ! Component: 150 - total flux cleaned = 0.00050332 Jy ! Component: 200 - total flux cleaned = 0.000260536 Jy ! Total flux subtracted in 200 components = 0.000260536 Jy ! Clean residual min=-0.012583 max=0.014508 Jy/beam ! Clean residual mean=-0.000890 rms=0.003550 Jy/beam ! Combined flux in latest and established models = 1.3924 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 1.3924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163336Jy sigma=0.000680 ! Fit after self-cal, rms=0.163335Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163335Jy sigma=0.000680 ! Fit after self-cal, rms=0.163358Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.513 mas, bmaj=13.71 mas, bpa=8.634 degrees ! Estimated noise=7215.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149143 Jy ! Component: 100 - total flux cleaned = 0.0017411 Jy ! Component: 150 - total flux cleaned = 0.00169303 Jy ! Component: 200 - total flux cleaned = 0.00164338 Jy ! Total flux subtracted in 200 components = 0.00164338 Jy ! Clean residual min=-0.012686 max=0.014335 Jy/beam ! Clean residual mean=-0.000806 rms=0.003469 Jy/beam ! Combined flux in latest and established models = 1.39404 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 1.39404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163284Jy sigma=0.000680 ! Fit after self-cal, rms=0.163283Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411775 Jy ! Component: 100 - total flux cleaned = 0.000465466 Jy ! Component: 150 - total flux cleaned = 0.000463915 Jy ! Component: 200 - total flux cleaned = 0.000374016 Jy ! Total flux subtracted in 200 components = 0.000374016 Jy ! Clean residual min=-0.012728 max=0.014328 Jy/beam ! Clean residual mean=-0.000823 rms=0.003435 Jy/beam ! Combined flux in latest and established models = 1.39442 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 1.39442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163245Jy sigma=0.000680 ! Fit after self-cal, rms=0.163245Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163245Jy sigma=0.000680 ! Fit after self-cal, rms=0.163278Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.759 mas, bmaj=15.51 mas, bpa=17.34 degrees ! Estimated noise=8077.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189206 Jy ! Component: 100 - total flux cleaned = 0.0023466 Jy ! Component: 150 - total flux cleaned = 0.00237653 Jy ! Component: 200 - total flux cleaned = 0.00243456 Jy ! Total flux subtracted in 200 components = 0.00243456 Jy ! Clean residual min=-0.011137 max=0.012035 Jy/beam ! Clean residual mean=-0.001291 rms=0.003618 Jy/beam ! Combined flux in latest and established models = 1.39685 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 66 components and 1.39685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163245Jy sigma=0.000680 ! Fit after self-cal, rms=0.163245Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114285 Jy ! Component: 100 - total flux cleaned = 0.000112383 Jy ! Component: 150 - total flux cleaned = 0.000139406 Jy ! Component: 200 - total flux cleaned = 0.000138676 Jy ! Total flux subtracted in 200 components = 0.000138676 Jy ! Clean residual min=-0.011148 max=0.011960 Jy/beam ! Clean residual mean=-0.001301 rms=0.003602 Jy/beam ! Combined flux in latest and established models = 1.39699 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 1.39699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163227Jy sigma=0.000679 ! Fit after self-cal, rms=0.163228Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.513 mas, bmaj=13.7 mas, bpa=8.654 degrees ! Estimated noise=7218.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.513 x 13.7 at 8.654 degrees (North through East) ! Clean map min=-0.012504 max=1.3555 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163228Jy sigma=0.000679 ! Fit after self-cal, rms=0.148952Jy sigma=0.000610 ! Inverting map and beam ! Estimated beam: bmin=5.514 mas, bmaj=13.7 mas, bpa=8.668 degrees ! Estimated noise=7221.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115854 Jy ! Component: 100 - total flux cleaned = 0.00115679 Jy ! Component: 150 - total flux cleaned = 0.00111937 Jy ! Component: 200 - total flux cleaned = 0.00100838 Jy ! Total flux subtracted in 200 components = 0.00100838 Jy ! Clean residual min=-0.012840 max=0.014292 Jy/beam ! Clean residual mean=-0.000807 rms=0.003354 Jy/beam ! Combined flux in latest and established models = 1.398 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 1.398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148911Jy sigma=0.000610 ! Fit after self-cal, rms=0.148914Jy sigma=0.000610 ! Inverting map ! Added new window around map position (70, -125.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425386 Jy ! Component: 100 - total flux cleaned = 0.00436488 Jy ! Component: 150 - total flux cleaned = 0.00440318 Jy ! Component: 200 - total flux cleaned = 0.00476845 Jy ! Total flux subtracted in 200 components = 0.00476845 Jy ! Clean residual min=-0.010826 max=0.010505 Jy/beam ! Clean residual mean=-0.000787 rms=0.002924 Jy/beam ! Combined flux in latest and established models = 1.40277 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 1.40277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147691Jy sigma=0.000606 ! Fit after self-cal, rms=0.147621Jy sigma=0.000605 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147621Jy sigma=0.000605 ! Fit after self-cal, rms=0.147631Jy sigma=0.000605 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.92 mas, bmaj=12.7 mas, bpa=4.426 degrees ! Estimated noise=8599.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04889 Jy ! Component: 100 - total flux cleaned = 1.27825 Jy ! Component: 150 - total flux cleaned = 1.3376 Jy ! Component: 200 - total flux cleaned = 1.36691 Jy ! Total flux subtracted in 200 components = 1.36691 Jy ! Clean residual min=-0.019085 max=0.022276 Jy/beam ! Clean residual mean=0.000223 rms=0.006364 Jy/beam ! Combined flux in latest and established models = 1.36691 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.36691 Jy ! Inverting map and beam ! Estimated beam: bmin=5.512 mas, bmaj=13.7 mas, bpa=8.654 degrees ! Estimated noise=7220.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145043 Jy ! Component: 100 - total flux cleaned = 0.0213264 Jy ! Component: 150 - total flux cleaned = 0.0240421 Jy ! Component: 200 - total flux cleaned = 0.0267595 Jy ! Total flux subtracted in 200 components = 0.0267595 Jy ! Clean residual min=-0.011399 max=0.012566 Jy/beam ! Clean residual mean=-0.000346 rms=0.003574 Jy/beam ! Combined flux in latest and established models = 1.39367 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 1.39367 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.757 mas, bmaj=15.51 mas, bpa=17.34 degrees ! Estimated noise=8082.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546977 Jy ! Component: 100 - total flux cleaned = 0.00749249 Jy ! Component: 150 - total flux cleaned = 0.00896152 Jy ! Component: 200 - total flux cleaned = 0.00987592 Jy ! Total flux subtracted in 200 components = 0.00987592 Jy ! Clean residual min=-0.011549 max=0.011822 Jy/beam ! Clean residual mean=-0.001075 rms=0.003610 Jy/beam ! Combined flux in latest and established models = 1.40355 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000838228 Jy ! Component: 100 - total flux cleaned = 0.00149604 Jy ! Component: 150 - total flux cleaned = 0.00211528 Jy ! Component: 200 - total flux cleaned = 0.00278631 Jy ! Total flux subtracted in 200 components = 0.00278631 Jy ! Clean residual min=-0.011298 max=0.011523 Jy/beam ! Clean residual mean=-0.001216 rms=0.003481 Jy/beam ! Combined flux in latest and established models = 1.40633 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 64 components and 1.40633 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.512 mas, bmaj=13.7 mas, bpa=8.654 degrees ! Estimated noise=7220.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034195 Jy ! Component: 100 - total flux cleaned = 0.000336424 Jy ! Component: 150 - total flux cleaned = 0.000947643 Jy ! Component: 200 - total flux cleaned = 0.00123925 Jy ! Total flux subtracted in 200 components = 0.00123925 Jy ! Clean residual min=-0.010268 max=0.011079 Jy/beam ! Clean residual mean=-0.000833 rms=0.002959 Jy/beam ! Combined flux in latest and established models = 1.40757 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 1.40757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147722Jy sigma=0.000605 ! Fit after self-cal, rms=0.147666Jy sigma=0.000605 wmodel J0118-2141_S_2017_04_28_pus_map.mod ! Writing 78 model components to file: J0118-2141_S_2017_04_28_pus_map.mod wobs J0118-2141_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0118-2141_S_2017_04_28_pus_uvs.fits wwins J0118-2141_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0118-2141_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000604088 Jy ! Component: 100 - total flux cleaned = -0.00134752 Jy ! Component: 150 - total flux cleaned = -0.00342946 Jy ! Component: 200 - total flux cleaned = -0.00566703 Jy ! Component: 250 - total flux cleaned = -0.00792567 Jy ! Component: 300 - total flux cleaned = -0.0101966 Jy ! Component: 350 - total flux cleaned = -0.0121174 Jy ! Component: 400 - total flux cleaned = -0.0140698 Jy ! Component: 450 - total flux cleaned = -0.0160535 Jy ! Component: 500 - total flux cleaned = -0.0178522 Jy ! Component: 550 - total flux cleaned = -0.0196835 Jy ! Component: 600 - total flux cleaned = -0.0215395 Jy ! Component: 650 - total flux cleaned = -0.0232302 Jy ! Component: 700 - total flux cleaned = -0.0243266 Jy ! Component: 750 - total flux cleaned = -0.0256605 Jy ! Component: 800 - total flux cleaned = -0.0267025 Jy ! Component: 850 - total flux cleaned = -0.0278053 Jy ! Component: 900 - total flux cleaned = -0.0290507 Jy ! Component: 950 - total flux cleaned = -0.0300279 Jy ! Component: 1000 - total flux cleaned = -0.0311482 Jy ! Component: 1050 - total flux cleaned = -0.0322494 Jy ! Component: 1100 - total flux cleaned = -0.033411 Jy ! Component: 1150 - total flux cleaned = -0.0344033 Jy ! Component: 1200 - total flux cleaned = -0.0353076 Jy ! Component: 1250 - total flux cleaned = -0.0360525 Jy ! Component: 1300 - total flux cleaned = -0.0369377 Jy ! Component: 1350 - total flux cleaned = -0.0378131 Jy ! Component: 1400 - total flux cleaned = -0.0388962 Jy ! Component: 1450 - total flux cleaned = -0.0398254 Jy ! Component: 1500 - total flux cleaned = -0.040818 Jy ! Component: 1550 - total flux cleaned = -0.041733 Jy ! Component: 1600 - total flux cleaned = -0.0427792 Jy ! Component: 1650 - total flux cleaned = -0.0438179 Jy ! Component: 1700 - total flux cleaned = -0.0447792 Jy ! Component: 1750 - total flux cleaned = -0.0455301 Jy ! Component: 1800 - total flux cleaned = -0.0464796 Jy ! Component: 1850 - total flux cleaned = -0.0473556 Jy ! Component: 1900 - total flux cleaned = -0.0478266 Jy ! Component: 1950 - total flux cleaned = -0.0483012 Jy ! Component: 2000 - total flux cleaned = -0.0486417 Jy ! Component: 2050 - total flux cleaned = -0.0490523 Jy ! Component: 2100 - total flux cleaned = -0.0495338 Jy ! Component: 2150 - total flux cleaned = -0.0500191 Jy ! Component: 2200 - total flux cleaned = -0.050437 Jy ! Component: 2250 - total flux cleaned = -0.0508584 Jy ! Component: 2300 - total flux cleaned = -0.0513522 Jy ! Component: 2350 - total flux cleaned = -0.051779 Jy ! Component: 2400 - total flux cleaned = -0.052351 Jy ! Component: 2450 - total flux cleaned = -0.0528548 Jy ! Component: 2500 - total flux cleaned = -0.0532177 Jy ! Component: 2550 - total flux cleaned = -0.0537302 Jy ! Component: 2600 - total flux cleaned = -0.0542467 Jy ! Component: 2650 - total flux cleaned = -0.0547664 Jy ! Component: 2700 - total flux cleaned = -0.0552163 Jy ! Component: 2750 - total flux cleaned = -0.0556695 Jy ! Component: 2800 - total flux cleaned = -0.0561282 Jy ! Component: 2850 - total flux cleaned = -0.0565922 Jy ! Component: 2900 - total flux cleaned = -0.0569824 Jy ! Component: 2950 - total flux cleaned = -0.0573772 Jy ! Component: 3000 - total flux cleaned = -0.0577758 Jy ! Component: 3050 - total flux cleaned = -0.0580175 Jy ! Component: 3100 - total flux cleaned = -0.0585061 Jy ! Component: 3150 - total flux cleaned = -0.0588356 Jy ! Component: 3200 - total flux cleaned = -0.0592521 Jy ! Component: 3250 - total flux cleaned = -0.0596736 Jy ! Component: 3300 - total flux cleaned = -0.0599286 Jy ! Component: 3350 - total flux cleaned = -0.0603582 Jy ! Component: 3400 - total flux cleaned = -0.0607934 Jy ! Component: 3450 - total flux cleaned = -0.061057 Jy ! Component: 3500 - total flux cleaned = -0.0613231 Jy ! Component: 3550 - total flux cleaned = -0.0615941 Jy ! Component: 3600 - total flux cleaned = -0.0618672 Jy ! Component: 3650 - total flux cleaned = -0.0621442 Jy ! Component: 3700 - total flux cleaned = -0.0624247 Jy ! Component: 3750 - total flux cleaned = -0.0625202 Jy ! Component: 3800 - total flux cleaned = -0.062711 Jy ! Component: 3850 - total flux cleaned = -0.0629054 Jy ! Component: 3900 - total flux cleaned = -0.0632024 Jy ! Component: 3950 - total flux cleaned = -0.0633018 Jy ! Component: 4000 - total flux cleaned = -0.0635048 Jy ! Component: 4050 - total flux cleaned = -0.0638136 Jy ! Total flux subtracted in 4096 components = -0.0639184 Jy ! Clean residual min=-0.006085 max=0.005874 Jy/beam ! Clean residual mean=-0.000031 rms=0.001965 Jy/beam ! Combined flux in latest and established models = 1.34366 Jy keep ! Adding 202 model components to the UV plane model. ! The established model now contains 280 components and 1.34365 Jy ![Exited script file: muppet] wmap "J0118-2141_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.512 x 13.7 at 8.654 degrees (North through East) ! Clean map min=-0.016569 max=1.355 Jy/beam ! Writing clean map to FITS file: J0118-2141_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.35504 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00201336 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.445749 0.445749 0.891497 1.78299 3.56599 7.13198 14.264 28.5279 57.0558 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.006 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.355 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.512 x 13.7 at 8.654 degrees (North through East) ! Clean map min=-0.016569 max=1.355 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0118-2141_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:14:52 2019