! Started logfile: J0116-2052_S_2017_07_16_pus_uvs.log on Thu May 9 10:56:58 2019 obs J0116-2052_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0116-2052_S_2017_07_16_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.610185 visibilities/baseline/integration-bin. ! Found source: J0116-2052 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 15816 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0116-2052_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 444 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 343 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1032 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.934403Jy sigma=0.006749 ! Fit after self-cal, rms=0.884447Jy sigma=0.006363 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.149 mas, bmaj=6.402 mas, bpa=-5.482 degrees ! Estimated noise=1384.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1038 Jy ! Component: 100 - total flux cleaned = 0.168318 Jy ! Total flux subtracted in 100 components = 0.168318 Jy ! Clean residual min=-0.030698 max=0.052263 Jy/beam ! Clean residual mean=-0.000108 rms=0.011490 Jy/beam ! Combined flux in latest and established models = 0.168318 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.168318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223982Jy sigma=0.001655 ! Fit after self-cal, rms=0.222870Jy sigma=0.001649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.543 mas, bmaj=7.015 mas, bpa=-6.369 degrees ! Estimated noise=940.906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0838918 Jy ! Component: 100 - total flux cleaned = 0.140331 Jy ! Component: 150 - total flux cleaned = 0.179221 Jy ! Component: 200 - total flux cleaned = 0.206153 Jy ! Total flux subtracted in 200 components = 0.206153 Jy ! Clean residual min=-0.049111 max=0.061157 Jy/beam ! Clean residual mean=0.000059 rms=0.015256 Jy/beam ! Combined flux in latest and established models = 0.374471 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 63 components and 0.374471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185543Jy sigma=0.001330 ! Fit after self-cal, rms=0.183163Jy sigma=0.001313 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 1.00* HN 1.74 KP 0.73 ! LA 1.00* MK 1.64 NL 2.43 OV 0.84 ! PT 0.90 SC 1.33 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.68 KP 0.56 ! LA 1.00* MK 1.29 NL 2.55 OV 1.25 ! PT 0.85 SC 1.39 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.54 KP 0.60 ! LA 1.00* MK 1.41 NL 2.38 OV 0.99 ! PT 0.86 SC 1.16 ! ! ! Correcting IF 4. ! A total of 408 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.183163Jy sigma=0.001313 ! Fit after self-cal, rms=0.247848Jy sigma=0.001052 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.572 mas, bpa=-2.657 degrees ! Estimated noise=1147.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428785 Jy ! Component: 100 - total flux cleaned = 0.00501518 Jy ! Component: 150 - total flux cleaned = 0.00566891 Jy ! Component: 200 - total flux cleaned = 0.00627305 Jy ! Total flux subtracted in 200 components = 0.00627305 Jy ! Clean residual min=-0.034131 max=0.037088 Jy/beam ! Clean residual mean=0.000109 rms=0.011024 Jy/beam ! Combined flux in latest and established models = 0.380744 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.380744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247181Jy sigma=0.001049 ! Fit after self-cal, rms=0.255507Jy sigma=0.001039 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255507Jy sigma=0.001039 ! Fit after self-cal, rms=0.297657Jy sigma=0.000991 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=7.632 mas, bpa=-2.966 degrees ! Estimated noise=1222.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143247 Jy ! Component: 100 - total flux cleaned = 0.0217352 Jy ! Component: 150 - total flux cleaned = 0.0239208 Jy ! Component: 200 - total flux cleaned = 0.0245105 Jy ! Total flux subtracted in 200 components = 0.0245105 Jy ! Clean residual min=-0.031892 max=0.036213 Jy/beam ! Clean residual mean=0.000075 rms=0.010344 Jy/beam ! Combined flux in latest and established models = 0.405254 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 75 components and 0.405254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295901Jy sigma=0.000985 ! Fit after self-cal, rms=0.296922Jy sigma=0.000984 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202881 Jy ! Component: 100 - total flux cleaned = 0.0021725 Jy ! Component: 150 - total flux cleaned = 0.00216895 Jy ! Component: 200 - total flux cleaned = 0.00217077 Jy ! Total flux subtracted in 200 components = 0.00217077 Jy ! Clean residual min=-0.031568 max=0.035544 Jy/beam ! Clean residual mean=0.000075 rms=0.010293 Jy/beam ! Combined flux in latest and established models = 0.407425 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 77 components and 0.407425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296705Jy sigma=0.000983 ! Fit after self-cal, rms=0.296611Jy sigma=0.000983 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296611Jy sigma=0.000983 ! Fit after self-cal, rms=0.314989Jy sigma=0.000951 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=7.7 mas, bpa=-2.647 degrees ! Estimated noise=1240.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396594 Jy ! Component: 100 - total flux cleaned = 0.00434354 Jy ! Component: 150 - total flux cleaned = 0.00469337 Jy ! Component: 200 - total flux cleaned = 0.00491312 Jy ! Total flux subtracted in 200 components = 0.00491312 Jy ! Clean residual min=-0.033518 max=0.035083 Jy/beam ! Clean residual mean=0.000072 rms=0.010091 Jy/beam ! Combined flux in latest and established models = 0.412338 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 79 components and 0.412338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314700Jy sigma=0.000951 ! Fit after self-cal, rms=0.315228Jy sigma=0.000950 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000555499 Jy ! Component: 100 - total flux cleaned = 0.000549018 Jy ! Component: 150 - total flux cleaned = 0.00064557 Jy ! Component: 200 - total flux cleaned = 0.000837773 Jy ! Total flux subtracted in 200 components = 0.000837773 Jy ! Clean residual min=-0.033190 max=0.034582 Jy/beam ! Clean residual mean=0.000071 rms=0.010055 Jy/beam ! Combined flux in latest and established models = 0.413176 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 82 components and 0.413176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315168Jy sigma=0.000949 ! Fit after self-cal, rms=0.315029Jy sigma=0.000949 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315029Jy sigma=0.000949 ! Fit after self-cal, rms=0.313705Jy sigma=0.000949 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.893 mas, bmaj=16.28 mas, bpa=-3.102 degrees ! Estimated noise=1401.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115194 Jy ! Component: 100 - total flux cleaned = 0.0132811 Jy ! Component: 150 - total flux cleaned = 0.01383 Jy ! Component: 200 - total flux cleaned = 0.0141691 Jy ! Total flux subtracted in 200 components = 0.0141691 Jy ! Clean residual min=-0.064386 max=0.066314 Jy/beam ! Clean residual mean=0.000144 rms=0.020719 Jy/beam ! Combined flux in latest and established models = 0.427345 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 84 components and 0.427345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313551Jy sigma=0.000949 ! Fit after self-cal, rms=0.313666Jy sigma=0.000947 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425316 Jy ! Component: 100 - total flux cleaned = 0.000976852 Jy ! Component: 150 - total flux cleaned = 0.00132464 Jy ! Component: 200 - total flux cleaned = 0.00164997 Jy ! Total flux subtracted in 200 components = 0.00164997 Jy ! Clean residual min=-0.064094 max=0.065833 Jy/beam ! Clean residual mean=0.000141 rms=0.020628 Jy/beam ! Combined flux in latest and established models = 0.428995 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 84 components and 0.428995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313868Jy sigma=0.000947 ! Fit after self-cal, rms=0.313841Jy sigma=0.000946 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.764 mas, bpa=-2.768 degrees ! Estimated noise=1259.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.914 x 7.764 at -2.768 degrees (North through East) ! Clean map min=-0.033033 max=0.13904 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.456 mas, bmaj=6.932 mas, bpa=-1.357 degrees ! Estimated noise=1812.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139486 Jy ! Component: 100 - total flux cleaned = 0.219851 Jy ! Component: 150 - total flux cleaned = 0.271398 Jy ! Component: 200 - total flux cleaned = 0.305139 Jy ! Total flux subtracted in 200 components = 0.305139 Jy ! Clean residual min=-0.031976 max=0.029079 Jy/beam ! Clean residual mean=0.000066 rms=0.008571 Jy/beam ! Combined flux in latest and established models = 0.305139 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.305139 Jy ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.764 mas, bpa=-2.768 degrees ! Estimated noise=1259.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0465849 Jy ! Component: 100 - total flux cleaned = 0.0734153 Jy ! Component: 150 - total flux cleaned = 0.0891718 Jy ! Component: 200 - total flux cleaned = 0.0984735 Jy ! Total flux subtracted in 200 components = 0.0984735 Jy ! Clean residual min=-0.035409 max=0.034384 Jy/beam ! Clean residual mean=0.000068 rms=0.010443 Jy/beam ! Combined flux in latest and established models = 0.403612 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 0.403612 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.893 mas, bmaj=16.28 mas, bpa=-3.102 degrees ! Estimated noise=1401.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164532 Jy ! Component: 100 - total flux cleaned = 0.0207692 Jy ! Component: 150 - total flux cleaned = 0.0211492 Jy ! Component: 200 - total flux cleaned = 0.021509 Jy ! Total flux subtracted in 200 components = 0.021509 Jy ! Clean residual min=-0.064544 max=0.065250 Jy/beam ! Clean residual mean=0.000141 rms=0.020659 Jy/beam ! Combined flux in latest and established models = 0.425121 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329955 Jy ! Component: 100 - total flux cleaned = 0.000653616 Jy ! Component: 150 - total flux cleaned = 0.000957725 Jy ! Component: 200 - total flux cleaned = 0.00125812 Jy ! Total flux subtracted in 200 components = 0.00125812 Jy ! Clean residual min=-0.064439 max=0.065097 Jy/beam ! Clean residual mean=0.000138 rms=0.020588 Jy/beam ! Combined flux in latest and established models = 0.42638 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.42638 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.764 mas, bpa=-2.768 degrees ! Estimated noise=1259.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0111878 Jy ! Component: 100 - total flux cleaned = -0.0107285 Jy ! Component: 150 - total flux cleaned = -0.0105407 Jy ! Component: 200 - total flux cleaned = -0.0105366 Jy ! Total flux subtracted in 200 components = -0.0105366 Jy ! Clean residual min=-0.035315 max=0.035192 Jy/beam ! Clean residual mean=0.000067 rms=0.010213 Jy/beam ! Combined flux in latest and established models = 0.415843 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 67 components and 0.415843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315551Jy sigma=0.000950 ! Fit after self-cal, rms=0.315594Jy sigma=0.000948 wmodel J0116-2052_S_2017_07_16_pus_map.mod ! Writing 67 model components to file: J0116-2052_S_2017_07_16_pus_map.mod wobs J0116-2052_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0116-2052_S_2017_07_16_pus_uvs.fits wwins J0116-2052_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0116-2052_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000792515 Jy ! Component: 100 - total flux cleaned = 0.00379345 Jy ! Component: 150 - total flux cleaned = 0.00694736 Jy ! Component: 200 - total flux cleaned = 0.00937695 Jy ! Component: 250 - total flux cleaned = 0.0111914 Jy ! Component: 300 - total flux cleaned = 0.0124649 Jy ! Component: 350 - total flux cleaned = 0.0128735 Jy ! Component: 400 - total flux cleaned = 0.0140381 Jy ! Component: 450 - total flux cleaned = 0.0147751 Jy ! Component: 500 - total flux cleaned = 0.0144302 Jy ! Component: 550 - total flux cleaned = 0.0151204 Jy ! Component: 600 - total flux cleaned = 0.0160973 Jy ! Component: 650 - total flux cleaned = 0.0173512 Jy ! Component: 700 - total flux cleaned = 0.0176567 Jy ! Component: 750 - total flux cleaned = 0.0185358 Jy ! Component: 800 - total flux cleaned = 0.0193767 Jy ! Component: 850 - total flux cleaned = 0.0204747 Jy ! Component: 900 - total flux cleaned = 0.0218064 Jy ! Component: 950 - total flux cleaned = 0.0238767 Jy ! Component: 1000 - total flux cleaned = 0.025138 Jy ! Component: 1050 - total flux cleaned = 0.0271072 Jy ! Component: 1100 - total flux cleaned = 0.0283059 Jy ! Component: 1150 - total flux cleaned = 0.0297111 Jy ! Component: 1200 - total flux cleaned = 0.0308564 Jy ! Component: 1250 - total flux cleaned = 0.0321926 Jy ! Component: 1300 - total flux cleaned = 0.0328464 Jy ! Component: 1350 - total flux cleaned = 0.0339133 Jy ! Component: 1400 - total flux cleaned = 0.0353758 Jy ! Component: 1450 - total flux cleaned = 0.0368038 Jy ! Component: 1500 - total flux cleaned = 0.0380047 Jy ! Component: 1550 - total flux cleaned = 0.038989 Jy ! Component: 1600 - total flux cleaned = 0.0399529 Jy ! Component: 1650 - total flux cleaned = 0.0410889 Jy ! Component: 1700 - total flux cleaned = 0.0423862 Jy ! Component: 1750 - total flux cleaned = 0.0431168 Jy ! Component: 1800 - total flux cleaned = 0.0447248 Jy ! Component: 1850 - total flux cleaned = 0.0461268 Jy ! Component: 1900 - total flux cleaned = 0.0469862 Jy ! Component: 1950 - total flux cleaned = 0.0480047 Jy ! Component: 2000 - total flux cleaned = 0.0491747 Jy ! Component: 2050 - total flux cleaned = 0.0506544 Jy ! Component: 2100 - total flux cleaned = 0.0516205 Jy ! Component: 2150 - total flux cleaned = 0.0528914 Jy ! Component: 2200 - total flux cleaned = 0.0539839 Jy ! Component: 2250 - total flux cleaned = 0.0550628 Jy ! Component: 2300 - total flux cleaned = 0.0556712 Jy ! Component: 2350 - total flux cleaned = 0.056422 Jy ! Component: 2400 - total flux cleaned = 0.0574556 Jy ! Component: 2450 - total flux cleaned = 0.0576032 Jy ! Component: 2500 - total flux cleaned = 0.0586107 Jy ! Component: 2550 - total flux cleaned = 0.058895 Jy ! Component: 2600 - total flux cleaned = 0.0586152 Jy ! Component: 2650 - total flux cleaned = 0.0587557 Jy ! Component: 2700 - total flux cleaned = 0.059166 Jy ! Component: 2750 - total flux cleaned = 0.0593009 Jy ! Component: 2800 - total flux cleaned = 0.0598404 Jy ! Component: 2850 - total flux cleaned = 0.0603747 Jy ! Component: 2900 - total flux cleaned = 0.0605079 Jy ! Component: 2950 - total flux cleaned = 0.0607712 Jy ! Component: 3000 - total flux cleaned = 0.061033 Jy ! Component: 3050 - total flux cleaned = 0.0615496 Jy ! Component: 3100 - total flux cleaned = 0.0615496 Jy ! Component: 3150 - total flux cleaned = 0.0616783 Jy ! Component: 3200 - total flux cleaned = 0.0618054 Jy ! Component: 3250 - total flux cleaned = 0.0621845 Jy ! Component: 3300 - total flux cleaned = 0.0621854 Jy ! Component: 3350 - total flux cleaned = 0.0621849 Jy ! Component: 3400 - total flux cleaned = 0.0621848 Jy ! Component: 3450 - total flux cleaned = 0.0619376 Jy ! Component: 3500 - total flux cleaned = 0.0619376 Jy ! Component: 3550 - total flux cleaned = 0.0618142 Jy ! Component: 3600 - total flux cleaned = 0.0616917 Jy ! Component: 3650 - total flux cleaned = 0.0619361 Jy ! Component: 3700 - total flux cleaned = 0.0619355 Jy ! Component: 3750 - total flux cleaned = 0.0620577 Jy ! Component: 3800 - total flux cleaned = 0.061936 Jy ! Component: 3850 - total flux cleaned = 0.0620574 Jy ! Component: 3900 - total flux cleaned = 0.0621785 Jy ! Component: 3950 - total flux cleaned = 0.0621783 Jy ! Component: 4000 - total flux cleaned = 0.06242 Jy ! Component: 4050 - total flux cleaned = 0.0621784 Jy ! Total flux subtracted in 4096 components = 0.0624194 Jy ! Clean residual min=-0.006805 max=0.006165 Jy/beam ! Clean residual mean=0.000007 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 0.478262 Jy keep ! Adding 531 model components to the UV plane model. ! The established model now contains 598 components and 0.478262 Jy ![Exited script file: muppet] wmap "J0116-2052_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.914 x 7.764 at -2.768 degrees (North through East) ! Clean map min=-0.017714 max=0.14071 Jy/beam ! Writing clean map to FITS file: J0116-2052_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.140705 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00232544 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.95812 4.95812 9.91624 19.8325 39.665 79.3299 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0069 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.914 x 7.764 at -2.768 degrees (North through East) ! Clean map min=-0.017714 max=0.14071 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0116-2052_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:57:03 2019