! Started logfile: J0115-2804_S_2017_07_16_pus_uvs.log on Thu May 9 10:56:53 2019 obs J0115-2804_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0115-2804_S_2017_07_16_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.598246 visibilities/baseline/integration-bin. ! Found source: J0115-2804 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 8184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0115-2804_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 547 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.818901Jy sigma=0.005263 ! Fit after self-cal, rms=0.768582Jy sigma=0.004945 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=6.574 mas, bpa=-9.449 degrees ! Estimated noise=1961.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183224 Jy ! Component: 100 - total flux cleaned = 0.249321 Jy ! Total flux subtracted in 100 components = 0.249321 Jy ! Clean residual min=-0.018337 max=0.030759 Jy/beam ! Clean residual mean=0.000014 rms=0.005785 Jy/beam ! Combined flux in latest and established models = 0.249321 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.249321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132630Jy sigma=0.000827 ! Fit after self-cal, rms=0.132354Jy sigma=0.000824 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=7.009 mas, bpa=-7.273 degrees ! Estimated noise=1528.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443838 Jy ! Component: 100 - total flux cleaned = 0.0667874 Jy ! Component: 150 - total flux cleaned = 0.0790244 Jy ! Component: 200 - total flux cleaned = 0.0866685 Jy ! Total flux subtracted in 200 components = 0.0866685 Jy ! Clean residual min=-0.011090 max=0.017211 Jy/beam ! Clean residual mean=0.000079 rms=0.003482 Jy/beam ! Combined flux in latest and established models = 0.33599 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.33599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119966Jy sigma=0.000710 ! Fit after self-cal, rms=0.119781Jy sigma=0.000708 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00* HN 1.13 KP 1.00 ! LA 1.00* MK 1.01 NL 0.88 OV 0.94 ! PT 1.00 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.27 KP 0.96 ! LA 1.00* MK 1.01 NL 1.01 OV 0.96 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.20 KP 0.94 ! LA 1.00* MK 1.04 NL 0.97 OV 0.90 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.119781Jy sigma=0.000708 ! Fit after self-cal, rms=0.122646Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.549 mas, bmaj=7.001 mas, bpa=-5.576 degrees ! Estimated noise=1527.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00081421 Jy ! Component: 100 - total flux cleaned = 0.000527196 Jy ! Component: 150 - total flux cleaned = 0.000282855 Jy ! Component: 200 - total flux cleaned = 0.000350977 Jy ! Total flux subtracted in 200 components = 0.000350977 Jy ! Clean residual min=-0.008662 max=0.011538 Jy/beam ! Clean residual mean=0.000023 rms=0.002301 Jy/beam ! Combined flux in latest and established models = 0.336341 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.336341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122419Jy sigma=0.000681 ! Fit after self-cal, rms=0.122733Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122733Jy sigma=0.000681 ! Fit after self-cal, rms=0.124326Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.542 mas, bmaj=6.992 mas, bpa=-5.523 degrees ! Estimated noise=1531.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267914 Jy ! Component: 100 - total flux cleaned = 0.00295975 Jy ! Component: 150 - total flux cleaned = 0.00300558 Jy ! Component: 200 - total flux cleaned = 0.00304637 Jy ! Total flux subtracted in 200 components = 0.00304637 Jy ! Clean residual min=-0.005870 max=0.006840 Jy/beam ! Clean residual mean=-0.000017 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.339387 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.339387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124246Jy sigma=0.000662 ! Fit after self-cal, rms=0.124408Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-89, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603317 Jy ! Component: 100 - total flux cleaned = 0.0090338 Jy ! Component: 150 - total flux cleaned = 0.00990562 Jy ! Component: 200 - total flux cleaned = 0.00990971 Jy ! Total flux subtracted in 200 components = 0.00990971 Jy ! Clean residual min=-0.006402 max=0.006370 Jy/beam ! Clean residual mean=-0.000015 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.349297 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.349297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124045Jy sigma=0.000660 ! Fit after self-cal, rms=0.124030Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124030Jy sigma=0.000660 ! Fit after self-cal, rms=0.128176Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.542 mas, bmaj=6.984 mas, bpa=-5.548 degrees ! Estimated noise=1532.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158869 Jy ! Component: 100 - total flux cleaned = 0.00145379 Jy ! Component: 150 - total flux cleaned = 0.00122485 Jy ! Component: 200 - total flux cleaned = 0.00112477 Jy ! Total flux subtracted in 200 components = 0.00112477 Jy ! Clean residual min=-0.004696 max=0.004466 Jy/beam ! Clean residual mean=-0.000018 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.350422 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.350422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128098Jy sigma=0.000653 ! Fit after self-cal, rms=0.128193Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.58144e-05 Jy ! Component: 100 - total flux cleaned = -6.22917e-05 Jy ! Component: 150 - total flux cleaned = -0.000104496 Jy ! Component: 200 - total flux cleaned = -0.000143296 Jy ! Total flux subtracted in 200 components = -0.000143296 Jy ! Clean residual min=-0.004700 max=0.004358 Jy/beam ! Clean residual mean=-0.000016 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.350278 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.350278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128154Jy sigma=0.000653 ! Fit after self-cal, rms=0.128164Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128164Jy sigma=0.000652 ! Fit after self-cal, rms=0.128609Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.472 mas, bmaj=15.21 mas, bpa=-3.369 degrees ! Estimated noise=2193.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127528 Jy ! Component: 100 - total flux cleaned = 0.00127488 Jy ! Component: 150 - total flux cleaned = 0.00127117 Jy ! Component: 200 - total flux cleaned = 0.00121729 Jy ! Total flux subtracted in 200 components = 0.00121729 Jy ! Clean residual min=-0.005731 max=0.007814 Jy/beam ! Clean residual mean=-0.000040 rms=0.002084 Jy/beam ! Combined flux in latest and established models = 0.351496 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 99 components and 0.351496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128624Jy sigma=0.000652 ! Fit after self-cal, rms=0.128636Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111579 Jy ! Component: 100 - total flux cleaned = 6.67142e-05 Jy ! Component: 150 - total flux cleaned = 6.87454e-05 Jy ! Component: 200 - total flux cleaned = 0.000143148 Jy ! Total flux subtracted in 200 components = 0.000143148 Jy ! Clean residual min=-0.005710 max=0.007681 Jy/beam ! Clean residual mean=-0.000036 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 0.351639 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.351639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128653Jy sigma=0.000652 ! Fit after self-cal, rms=0.128657Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=6.983 mas, bpa=-5.565 degrees ! Estimated noise=1534.29 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.544 x 6.983 at -5.565 degrees (North through East) ! Clean map min=-0.0042094 max=0.24558 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=6.514 mas, bpa=-7.055 degrees ! Estimated noise=1920.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.18599 Jy ! Component: 100 - total flux cleaned = 0.25466 Jy ! Component: 150 - total flux cleaned = 0.291318 Jy ! Component: 200 - total flux cleaned = 0.31157 Jy ! Total flux subtracted in 200 components = 0.31157 Jy ! Clean residual min=-0.008162 max=0.009820 Jy/beam ! Clean residual mean=-0.000038 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 0.31157 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.31157 Jy ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=6.983 mas, bpa=-5.565 degrees ! Estimated noise=1534.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013232 Jy ! Component: 100 - total flux cleaned = 0.0214169 Jy ! Component: 150 - total flux cleaned = 0.0271505 Jy ! Component: 200 - total flux cleaned = 0.0313548 Jy ! Total flux subtracted in 200 components = 0.0313548 Jy ! Clean residual min=-0.005349 max=0.004648 Jy/beam ! Clean residual mean=-0.000019 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.342925 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.342925 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.472 mas, bmaj=15.21 mas, bpa=-3.369 degrees ! Estimated noise=2193.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529487 Jy ! Component: 100 - total flux cleaned = 0.00747234 Jy ! Component: 150 - total flux cleaned = 0.00784218 Jy ! Component: 200 - total flux cleaned = 0.00808261 Jy ! Total flux subtracted in 200 components = 0.00808261 Jy ! Clean residual min=-0.005919 max=0.007731 Jy/beam ! Clean residual mean=-0.000041 rms=0.002089 Jy/beam ! Combined flux in latest and established models = 0.351007 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.19921e-05 Jy ! Component: 100 - total flux cleaned = 0.000100226 Jy ! Component: 150 - total flux cleaned = 0.000142992 Jy ! Component: 200 - total flux cleaned = 0.000224837 Jy ! Total flux subtracted in 200 components = 0.000224837 Jy ! Clean residual min=-0.005762 max=0.007556 Jy/beam ! Clean residual mean=-0.000037 rms=0.002052 Jy/beam ! Combined flux in latest and established models = 0.351232 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.351232 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=6.983 mas, bpa=-5.565 degrees ! Estimated noise=1534.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000779866 Jy ! Component: 100 - total flux cleaned = -0.000870804 Jy ! Component: 150 - total flux cleaned = -0.000947003 Jy ! Component: 200 - total flux cleaned = -0.000946849 Jy ! Total flux subtracted in 200 components = -0.000946849 Jy ! Clean residual min=-0.004668 max=0.004739 Jy/beam ! Clean residual mean=-0.000015 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.350285 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 80 components and 0.350285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128733Jy sigma=0.000653 ! Fit after self-cal, rms=0.128715Jy sigma=0.000653 wmodel J0115-2804_S_2017_07_16_pus_map.mod ! Writing 80 model components to file: J0115-2804_S_2017_07_16_pus_map.mod wobs J0115-2804_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0115-2804_S_2017_07_16_pus_uvs.fits wwins J0115-2804_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J0115-2804_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000678531 Jy ! Component: 100 - total flux cleaned = 0.0018715 Jy ! Component: 150 - total flux cleaned = 0.00241689 Jy ! Component: 200 - total flux cleaned = 0.00292477 Jy ! Component: 250 - total flux cleaned = 0.00334007 Jy ! Component: 300 - total flux cleaned = 0.00356234 Jy ! Component: 350 - total flux cleaned = 0.00372262 Jy ! Component: 400 - total flux cleaned = 0.00367264 Jy ! Component: 450 - total flux cleaned = 0.00372371 Jy ! Component: 500 - total flux cleaned = 0.00386461 Jy ! Component: 550 - total flux cleaned = 0.00399902 Jy ! Component: 600 - total flux cleaned = 0.00417308 Jy ! Component: 650 - total flux cleaned = 0.00413217 Jy ! Component: 700 - total flux cleaned = 0.00409159 Jy ! Component: 750 - total flux cleaned = 0.00409059 Jy ! Component: 800 - total flux cleaned = 0.00393734 Jy ! Component: 850 - total flux cleaned = 0.00389997 Jy ! Component: 900 - total flux cleaned = 0.00393745 Jy ! Component: 950 - total flux cleaned = 0.00386524 Jy ! Component: 1000 - total flux cleaned = 0.00383007 Jy ! Component: 1050 - total flux cleaned = 0.00376169 Jy ! Component: 1100 - total flux cleaned = 0.00366121 Jy ! Component: 1150 - total flux cleaned = 0.00359526 Jy ! Component: 1200 - total flux cleaned = 0.00353144 Jy ! Component: 1250 - total flux cleaned = 0.00346844 Jy ! Component: 1300 - total flux cleaned = 0.00340604 Jy ! Component: 1350 - total flux cleaned = 0.00334481 Jy ! Component: 1400 - total flux cleaned = 0.00334494 Jy ! Component: 1450 - total flux cleaned = 0.00331567 Jy ! Component: 1500 - total flux cleaned = 0.00331647 Jy ! Component: 1550 - total flux cleaned = 0.00334553 Jy ! Component: 1600 - total flux cleaned = 0.00340205 Jy ! Component: 1650 - total flux cleaned = 0.00334591 Jy ! Component: 1700 - total flux cleaned = 0.00331903 Jy ! Component: 1750 - total flux cleaned = 0.00331894 Jy ! Component: 1800 - total flux cleaned = 0.00331898 Jy ! Component: 1850 - total flux cleaned = 0.00326643 Jy ! Component: 1900 - total flux cleaned = 0.00329265 Jy ! Component: 1950 - total flux cleaned = 0.00326673 Jy ! Component: 2000 - total flux cleaned = 0.00319025 Jy ! Component: 2050 - total flux cleaned = 0.00319021 Jy ! Component: 2100 - total flux cleaned = 0.00319022 Jy ! Component: 2150 - total flux cleaned = 0.00318985 Jy ! Component: 2200 - total flux cleaned = 0.00318955 Jy ! Component: 2250 - total flux cleaned = 0.00311784 Jy ! Component: 2300 - total flux cleaned = 0.00314136 Jy ! Component: 2350 - total flux cleaned = 0.00304812 Jy ! Component: 2400 - total flux cleaned = 0.0030254 Jy ! Component: 2450 - total flux cleaned = 0.00304818 Jy ! Component: 2500 - total flux cleaned = 0.00300295 Jy ! Component: 2550 - total flux cleaned = 0.00286949 Jy ! Component: 2600 - total flux cleaned = 0.0028253 Jy ! Component: 2650 - total flux cleaned = 0.00271622 Jy ! Component: 2700 - total flux cleaned = 0.0026946 Jy ! Component: 2750 - total flux cleaned = 0.00265117 Jy ! Component: 2800 - total flux cleaned = 0.00262971 Jy ! Component: 2850 - total flux cleaned = 0.00254523 Jy ! Component: 2900 - total flux cleaned = 0.00246147 Jy ! Component: 2950 - total flux cleaned = 0.00241999 Jy ! Component: 3000 - total flux cleaned = 0.00233744 Jy ! Component: 3050 - total flux cleaned = 0.00215321 Jy ! Component: 3100 - total flux cleaned = 0.00207216 Jy ! Component: 3150 - total flux cleaned = 0.00189036 Jy ! Component: 3200 - total flux cleaned = 0.00177012 Jy ! Component: 3250 - total flux cleaned = 0.00159093 Jy ! Component: 3300 - total flux cleaned = 0.00151175 Jy ! Component: 3350 - total flux cleaned = 0.00139371 Jy ! Component: 3400 - total flux cleaned = 0.00125694 Jy ! Component: 3450 - total flux cleaned = 0.00104327 Jy ! Component: 3500 - total flux cleaned = 0.000946736 Jy ! Component: 3550 - total flux cleaned = 0.000792992 Jy ! Component: 3600 - total flux cleaned = 0.000659376 Jy ! Component: 3650 - total flux cleaned = 0.000469448 Jy ! Component: 3700 - total flux cleaned = 0.000374986 Jy ! Component: 3750 - total flux cleaned = 0.000262051 Jy ! Component: 3800 - total flux cleaned = 0.000112263 Jy ! Component: 3850 - total flux cleaned = 5.62524e-05 Jy ! Component: 3900 - total flux cleaned = -1.81396e-05 Jy ! Component: 3950 - total flux cleaned = -0.000110644 Jy ! Component: 4000 - total flux cleaned = -0.000202726 Jy ! Component: 4050 - total flux cleaned = -0.000294403 Jy ! Total flux subtracted in 4096 components = -0.000403964 Jy ! Clean residual min=-0.001128 max=0.001447 Jy/beam ! Clean residual mean=-0.000000 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.349881 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 358 components and 0.349881 Jy ![Exited script file: muppet] wmap "J0115-2804_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.544 x 6.983 at -5.565 degrees (North through East) ! Clean map min=-0.0025287 max=0.24783 Jy/beam ! Writing clean map to FITS file: J0115-2804_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.247833 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00029722 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.359782 0.359782 0.719564 1.43913 2.87826 5.75651 11.513 23.0261 46.0521 92.1042 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.247 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.544 x 6.983 at -5.565 degrees (North through East) ! Clean map min=-0.0025287 max=0.24783 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0115-2804_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:56:57 2019