! Started logfile: J0113-3551_S_2017_10_21_pus_uvs.log on Sat May 11 20:48:00 2019 obs J0113-3551_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0113-3551_S_2017_10_21_pus_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.27251 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0113-3551 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 2276 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0113-3551_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 522 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.882513Jy sigma=0.006105 ! Fit after self-cal, rms=0.845574Jy sigma=0.005891 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.562 mas, bmaj=57.38 mas, bpa=8.259 degrees ! Estimated noise=3043.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123975 Jy ! Component: 100 - total flux cleaned = 0.1576 Jy ! Total flux subtracted in 100 components = 0.1576 Jy ! Clean residual min=-0.012892 max=0.012787 Jy/beam ! Clean residual mean=0.000038 rms=0.004811 Jy/beam ! Combined flux in latest and established models = 0.1576 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.1576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105492Jy sigma=0.000654 ! Fit after self-cal, rms=0.105552Jy sigma=0.000653 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.309 mas, bmaj=62.04 mas, bpa=7.781 degrees ! Estimated noise=2698.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323545 Jy ! Component: 100 - total flux cleaned = 0.000620637 Jy ! Component: 150 - total flux cleaned = 0.00195826 Jy ! Component: 200 - total flux cleaned = 0.00379587 Jy ! Total flux subtracted in 200 components = 0.00379587 Jy ! Clean residual min=-0.003523 max=0.003553 Jy/beam ! Clean residual mean=0.000008 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.161396 Jy ! Performing phase self-cal ! Adding 90 model components to the UV plane model. ! The established model now contains 104 components and 0.161396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102642Jy sigma=0.000638 ! Fit after self-cal, rms=0.102267Jy sigma=0.000637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.03 ! LA 1.08 MK 1.00* NL 1.00* OV 1.01 ! PT 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.01 ! LA 1.07 MK 1.00* NL 0.94 OV 1.02 ! PT 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.97 ! LA 0.81 MK 1.00* NL 1.04 OV 0.93 ! PT 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.102267Jy sigma=0.000637 ! Fit after self-cal, rms=0.097060Jy sigma=0.000627 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.276 mas, bmaj=62.22 mas, bpa=7.811 degrees ! Estimated noise=2667.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011397 Jy ! Component: 100 - total flux cleaned = 0.00191995 Jy ! Component: 150 - total flux cleaned = 0.00212945 Jy ! Component: 200 - total flux cleaned = 0.00212709 Jy ! Total flux subtracted in 200 components = 0.00212709 Jy ! Clean residual min=-0.000947 max=0.000940 Jy/beam ! Clean residual mean=0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.163523 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 182 components and 0.163523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096892Jy sigma=0.000626 ! Fit after self-cal, rms=0.096717Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096717Jy sigma=0.000625 ! Fit after self-cal, rms=0.096268Jy sigma=0.000625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.265 mas, bmaj=62.22 mas, bpa=7.807 degrees ! Estimated noise=2660.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533607 Jy ! Component: 100 - total flux cleaned = 0.0004093 Jy ! Component: 150 - total flux cleaned = 0.000297075 Jy ! Component: 200 - total flux cleaned = 0.000261223 Jy ! Total flux subtracted in 200 components = 0.000261223 Jy ! Clean residual min=-0.000589 max=0.000587 Jy/beam ! Clean residual mean=-0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.163784 Jy selfcal ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 257 components and 0.163784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096234Jy sigma=0.000625 ! Fit after self-cal, rms=0.096206Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000361108 Jy ! Component: 100 - total flux cleaned = -0.000514048 Jy ! Component: 150 - total flux cleaned = -0.000655137 Jy ! Component: 200 - total flux cleaned = -0.000655605 Jy ! Total flux subtracted in 200 components = -0.000655605 Jy ! Clean residual min=-0.000436 max=0.000431 Jy/beam ! Clean residual mean=-0.000001 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.163129 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 301 components and 0.163129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096189Jy sigma=0.000625 ! Fit after self-cal, rms=0.096181Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096181Jy sigma=0.000625 ! Fit after self-cal, rms=0.096143Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.262 mas, bmaj=62.23 mas, bpa=7.807 degrees ! Estimated noise=2660.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193403 Jy ! Component: 100 - total flux cleaned = -0.000389148 Jy ! Component: 150 - total flux cleaned = -0.000442272 Jy ! Component: 200 - total flux cleaned = -0.000581969 Jy ! Total flux subtracted in 200 components = -0.000581969 Jy ! Clean residual min=-0.000485 max=0.000491 Jy/beam ! Clean residual mean=-0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.162547 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 332 components and 0.162547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096131Jy sigma=0.000625 ! Fit after self-cal, rms=0.096126Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00043502 Jy ! Component: 100 - total flux cleaned = -0.000523827 Jy ! Component: 150 - total flux cleaned = -0.000524032 Jy ! Component: 200 - total flux cleaned = -0.000524382 Jy ! Total flux subtracted in 200 components = -0.000524382 Jy ! Clean residual min=-0.000439 max=0.000449 Jy/beam ! Clean residual mean=-0.000001 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.162023 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 370 components and 0.162023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096118Jy sigma=0.000625 ! Fit after self-cal, rms=0.096123Jy sigma=0.000625 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096123Jy sigma=0.000625 ! Fit after self-cal, rms=0.096076Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.16 mas, bmaj=62 mas, bpa=8.119 degrees ! Estimated noise=2663.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107157 Jy ! Component: 100 - total flux cleaned = -0.000308874 Jy ! Component: 150 - total flux cleaned = -0.000482021 Jy ! Component: 200 - total flux cleaned = -0.000619666 Jy ! Total flux subtracted in 200 components = -0.000619666 Jy ! Clean residual min=-0.000346 max=0.000341 Jy/beam ! Clean residual mean=-0.000001 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.161403 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 410 components and 0.161403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096068Jy sigma=0.000625 ! Fit after self-cal, rms=0.096062Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209026 Jy ! Component: 100 - total flux cleaned = -0.000264737 Jy ! Component: 150 - total flux cleaned = -0.000340323 Jy ! Component: 200 - total flux cleaned = -0.00044019 Jy ! Total flux subtracted in 200 components = -0.00044019 Jy ! Clean residual min=-0.000358 max=0.000345 Jy/beam ! Clean residual mean=-0.000000 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.160963 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 446 components and 0.160963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096056Jy sigma=0.000625 ! Fit after self-cal, rms=0.096059Jy sigma=0.000625 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=9.26 mas, bmaj=62.22 mas, bpa=7.802 degrees ! Estimated noise=2660.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.26 x 62.22 at 7.802 degrees (North through East) ! Clean map min=-0.0097861 max=0.14093 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.509 mas, bmaj=57.52 mas, bpa=8.322 degrees ! Estimated noise=2989.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121281 Jy ! Component: 100 - total flux cleaned = 0.151475 Jy ! Component: 150 - total flux cleaned = 0.149409 Jy ! Component: 200 - total flux cleaned = 0.148607 Jy ! Total flux subtracted in 200 components = 0.148607 Jy ! Clean residual min=-0.012868 max=0.013051 Jy/beam ! Clean residual mean=0.000019 rms=0.003961 Jy/beam ! Combined flux in latest and established models = 0.148607 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.148607 Jy ! Inverting map and beam ! Estimated beam: bmin=9.26 mas, bmaj=62.22 mas, bpa=7.802 degrees ! Estimated noise=2660.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147322 Jy ! Component: 100 - total flux cleaned = 0.00238633 Jy ! Component: 150 - total flux cleaned = 0.00239657 Jy ! Component: 200 - total flux cleaned = 0.00285837 Jy ! Total flux subtracted in 200 components = 0.00285837 Jy ! Clean residual min=-0.003791 max=0.003885 Jy/beam ! Clean residual mean=-0.000006 rms=0.001683 Jy/beam ! Combined flux in latest and established models = 0.151466 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 121 components and 0.151466 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.16 mas, bmaj=62 mas, bpa=8.119 degrees ! Estimated noise=2663.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139561 Jy ! Component: 100 - total flux cleaned = -0.00179224 Jy ! Component: 150 - total flux cleaned = -0.00149326 Jy ! Component: 200 - total flux cleaned = -0.000631416 Jy ! Total flux subtracted in 200 components = -0.000631416 Jy ! Clean residual min=-0.001577 max=0.001569 Jy/beam ! Clean residual mean=-0.000006 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.150834 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000574532 Jy ! Component: 100 - total flux cleaned = 0.000777562 Jy ! Component: 150 - total flux cleaned = 0.00123772 Jy ! Component: 200 - total flux cleaned = 0.00136506 Jy ! Total flux subtracted in 200 components = 0.00136506 Jy ! Clean residual min=-0.002220 max=0.002278 Jy/beam ! Clean residual mean=-0.000002 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.152199 Jy ! Adding 112 model components to the UV plane model. ! The established model now contains 229 components and 0.152199 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=9.26 mas, bmaj=62.22 mas, bpa=7.802 degrees ! Estimated noise=2660.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000718168 Jy ! Component: 100 - total flux cleaned = -0.00120118 Jy ! Component: 150 - total flux cleaned = -0.0018587 Jy ! Component: 200 - total flux cleaned = -0.00242656 Jy ! Total flux subtracted in 200 components = -0.00242656 Jy ! Clean residual min=-0.000824 max=0.000803 Jy/beam ! Clean residual mean=-0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.149773 Jy selfcal ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 314 components and 0.149773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096154Jy sigma=0.000625 ! Fit after self-cal, rms=0.096154Jy sigma=0.000625 wmodel J0113-3551_S_2017_10_21_pus_map.mod ! Writing 314 model components to file: J0113-3551_S_2017_10_21_pus_map.mod wobs J0113-3551_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0113-3551_S_2017_10_21_pus_uvs.fits wwins J0113-3551_S_2017_10_21_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0113-3551_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.26 x 62.22 at 7.802 degrees (North through East) ! Clean map min=-0.0092927 max=0.1306 Jy/beam ! Writing clean map to FITS file: J0113-3551_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.130603 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025441 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.58439 0.58439 1.16878 2.33756 4.67512 9.35024 18.7005 37.401 74.802 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.26 x 62.22 at 7.802 degrees (North through East) ! Clean map min=-0.0092927 max=0.1306 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0113-3551_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:48:06 2019