! Started logfile: J0112+2244_S_2017_10_21_pus_uvs.log on Sat May 11 20:47:56 2019 obs J0112+2244_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0112+2244_S_2017_10_21_pus_uva.fits ! AN table 1: 10 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.708333 visibilities/baseline/integration-bin. ! Found source: J0112+2244 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 1020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0112+2244_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.742577Jy sigma=0.008191 ! Fit after self-cal, rms=0.737112Jy sigma=0.008135 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.58 mas, bmaj=12.39 mas, bpa=-28.8 degrees ! Estimated noise=2768.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197644 Jy ! Component: 100 - total flux cleaned = 0.244158 Jy ! Total flux subtracted in 100 components = 0.244158 Jy ! Clean residual min=-0.013466 max=0.020510 Jy/beam ! Clean residual mean=-0.000048 rms=0.004094 Jy/beam ! Combined flux in latest and established models = 0.244158 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.244158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093942Jy sigma=0.000876 ! Fit after self-cal, rms=0.093919Jy sigma=0.000876 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=12.86 mas, bpa=-29.35 degrees ! Estimated noise=2426.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283184 Jy ! Component: 100 - total flux cleaned = 0.042525 Jy ! Component: 150 - total flux cleaned = 0.0512849 Jy ! Component: 200 - total flux cleaned = 0.0569136 Jy ! Total flux subtracted in 200 components = 0.0569136 Jy ! Clean residual min=-0.009541 max=0.012691 Jy/beam ! Clean residual mean=-0.000043 rms=0.002846 Jy/beam ! Combined flux in latest and established models = 0.301072 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 41 components and 0.301071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083548Jy sigma=0.000782 ! Fit after self-cal, rms=0.083541Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.99 KP 1.09 ! LA 1.03 MK 0.98 NL 0.93 OV 1.00 ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.01 KP 1.01 ! LA 0.96 MK 0.95 NL 0.98 OV 1.08 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 0.99 KP 1.04 ! LA 0.74 MK 1.00 NL 1.23 OV 0.96 ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.11 KP 1.00* ! LA 1.05 MK 1.40 NL 1.00* OV 1.00* ! PT 0.85 ! ! ! Fit before self-cal, rms=0.083541Jy sigma=0.000782 ! Fit after self-cal, rms=0.073487Jy sigma=0.000706 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=12.75 mas, bpa=-29.33 degrees ! Estimated noise=2407.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134855 Jy ! Component: 100 - total flux cleaned = 0.00159194 Jy ! Component: 150 - total flux cleaned = 0.00165893 Jy ! Component: 200 - total flux cleaned = 0.00165798 Jy ! Total flux subtracted in 200 components = 0.00165798 Jy ! Clean residual min=-0.005142 max=0.004613 Jy/beam ! Clean residual mean=0.000002 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.302729 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.30273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073302Jy sigma=0.000703 ! Fit after self-cal, rms=0.073461Jy sigma=0.000703 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073461Jy sigma=0.000703 ! Fit after self-cal, rms=0.073750Jy sigma=0.000703 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=12.73 mas, bpa=-29.31 degrees ! Estimated noise=2409.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000651812 Jy ! Component: 100 - total flux cleaned = 0.000432691 Jy ! Component: 150 - total flux cleaned = 0.000430389 Jy ! Component: 200 - total flux cleaned = 0.000351985 Jy ! Total flux subtracted in 200 components = 0.000351985 Jy ! Clean residual min=-0.005036 max=0.004342 Jy/beam ! Clean residual mean=0.000001 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.303082 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.303082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073655Jy sigma=0.000702 ! Fit after self-cal, rms=0.073666Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.7034e-05 Jy ! Component: 100 - total flux cleaned = -0.000149342 Jy ! Component: 150 - total flux cleaned = -8.58977e-05 Jy ! Component: 200 - total flux cleaned = -8.54592e-05 Jy ! Total flux subtracted in 200 components = -8.54592e-05 Jy ! Clean residual min=-0.004895 max=0.004264 Jy/beam ! Clean residual mean=0.000001 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.302996 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.302996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073626Jy sigma=0.000701 ! Fit after self-cal, rms=0.073623Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073623Jy sigma=0.000701 ! Fit after self-cal, rms=0.073772Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=12.72 mas, bpa=-29.28 degrees ! Estimated noise=2412.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105954 Jy ! Component: 100 - total flux cleaned = -3.08637e-05 Jy ! Component: 150 - total flux cleaned = -5.87004e-05 Jy ! Component: 200 - total flux cleaned = -5.93466e-05 Jy ! Total flux subtracted in 200 components = -5.93466e-05 Jy ! Clean residual min=-0.004872 max=0.004182 Jy/beam ! Clean residual mean=0.000001 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.302937 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 0.302937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073721Jy sigma=0.000701 ! Fit after self-cal, rms=0.073727Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.83296e-05 Jy ! Component: 100 - total flux cleaned = -8.59517e-05 Jy ! Component: 150 - total flux cleaned = -6.56735e-05 Jy ! Component: 200 - total flux cleaned = -8.4023e-05 Jy ! Total flux subtracted in 200 components = -8.4023e-05 Jy ! Clean residual min=-0.004827 max=0.004130 Jy/beam ! Clean residual mean=0.000001 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.302853 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.302853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073708Jy sigma=0.000701 ! Fit after self-cal, rms=0.073705Jy sigma=0.000701 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073705Jy sigma=0.000701 ! Fit after self-cal, rms=0.073808Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.771 mas, bmaj=12.8 mas, bpa=-35.37 degrees ! Estimated noise=3030.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.95084e-05 Jy ! Component: 100 - total flux cleaned = 0.000153911 Jy ! Component: 150 - total flux cleaned = 0.000175461 Jy ! Component: 200 - total flux cleaned = 0.000215341 Jy ! Total flux subtracted in 200 components = 0.000215341 Jy ! Clean residual min=-0.005599 max=0.004727 Jy/beam ! Clean residual mean=0.000002 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.303068 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 117 components and 0.303068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073789Jy sigma=0.000700 ! Fit after self-cal, rms=0.073791Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.59916e-05 Jy ! Component: 100 - total flux cleaned = 9.38111e-05 Jy ! Component: 150 - total flux cleaned = 0.000109913 Jy ! Component: 200 - total flux cleaned = 0.000125602 Jy ! Total flux subtracted in 200 components = 0.000125602 Jy ! Clean residual min=-0.005556 max=0.004710 Jy/beam ! Clean residual mean=0.000002 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.303194 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 126 components and 0.303194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073790Jy sigma=0.000700 ! Fit after self-cal, rms=0.073788Jy sigma=0.000700 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=12.7 mas, bpa=-29.26 degrees ! Estimated noise=2413.86 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 12.7 at -29.26 degrees (North through East) ! Clean map min=-0.0046471 max=0.25883 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.585 mas, bmaj=12.27 mas, bpa=-28.68 degrees ! Estimated noise=2767.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197096 Jy ! Component: 100 - total flux cleaned = 0.243886 Jy ! Component: 150 - total flux cleaned = 0.264784 Jy ! Component: 200 - total flux cleaned = 0.276154 Jy ! Total flux subtracted in 200 components = 0.276154 Jy ! Clean residual min=-0.007215 max=0.006908 Jy/beam ! Clean residual mean=-0.000012 rms=0.001995 Jy/beam ! Combined flux in latest and established models = 0.276154 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.276154 Jy ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=12.7 mas, bpa=-29.26 degrees ! Estimated noise=2413.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101645 Jy ! Component: 100 - total flux cleaned = 0.0159941 Jy ! Component: 150 - total flux cleaned = 0.019948 Jy ! Component: 200 - total flux cleaned = 0.0224086 Jy ! Total flux subtracted in 200 components = 0.0224086 Jy ! Clean residual min=-0.005149 max=0.004508 Jy/beam ! Clean residual mean=-0.000003 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.298562 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 47 components and 0.298562 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.771 mas, bmaj=12.8 mas, bpa=-35.37 degrees ! Estimated noise=3030.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311894 Jy ! Component: 100 - total flux cleaned = 0.00380482 Jy ! Component: 150 - total flux cleaned = 0.00391149 Jy ! Component: 200 - total flux cleaned = 0.0040443 Jy ! Total flux subtracted in 200 components = 0.0040443 Jy ! Clean residual min=-0.006078 max=0.004935 Jy/beam ! Clean residual mean=0.000002 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 0.302607 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118657 Jy ! Component: 100 - total flux cleaned = 0.000224472 Jy ! Component: 150 - total flux cleaned = 0.000289025 Jy ! Component: 200 - total flux cleaned = 0.000377115 Jy ! Total flux subtracted in 200 components = 0.000377115 Jy ! Clean residual min=-0.005825 max=0.004971 Jy/beam ! Clean residual mean=0.000002 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 0.302984 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 75 components and 0.302984 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=12.7 mas, bpa=-29.26 degrees ! Estimated noise=2413.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128972 Jy ! Component: 100 - total flux cleaned = -0.000352796 Jy ! Component: 150 - total flux cleaned = -0.000402015 Jy ! Component: 200 - total flux cleaned = -0.000402681 Jy ! Total flux subtracted in 200 components = -0.000402681 Jy ! Clean residual min=-0.005030 max=0.004056 Jy/beam ! Clean residual mean=0.000001 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.302581 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.302581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073886Jy sigma=0.000701 ! Fit after self-cal, rms=0.073856Jy sigma=0.000701 wmodel J0112+2244_S_2017_10_21_pus_map.mod ! Writing 89 model components to file: J0112+2244_S_2017_10_21_pus_map.mod wobs J0112+2244_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0112+2244_S_2017_10_21_pus_uvs.fits wwins J0112+2244_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0112+2244_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196223 Jy ! Component: 100 - total flux cleaned = -0.00276553 Jy ! Component: 150 - total flux cleaned = -0.00290192 Jy ! Component: 200 - total flux cleaned = -0.00302692 Jy ! Component: 250 - total flux cleaned = -0.00326338 Jy ! Component: 300 - total flux cleaned = -0.00337565 Jy ! Component: 350 - total flux cleaned = -0.00358714 Jy ! Component: 400 - total flux cleaned = -0.00363724 Jy ! Component: 450 - total flux cleaned = -0.00368412 Jy ! Component: 500 - total flux cleaned = -0.0035896 Jy ! Component: 550 - total flux cleaned = -0.00345382 Jy ! Component: 600 - total flux cleaned = -0.00353945 Jy ! Component: 650 - total flux cleaned = -0.0034123 Jy ! Component: 700 - total flux cleaned = -0.00341319 Jy ! Component: 750 - total flux cleaned = -0.00333383 Jy ! Component: 800 - total flux cleaned = -0.00333349 Jy ! Component: 850 - total flux cleaned = -0.00318359 Jy ! Component: 900 - total flux cleaned = -0.00311082 Jy ! Component: 950 - total flux cleaned = -0.00296924 Jy ! Component: 1000 - total flux cleaned = -0.00307438 Jy ! Component: 1050 - total flux cleaned = -0.00317538 Jy ! Component: 1100 - total flux cleaned = -0.00307487 Jy ! Component: 1150 - total flux cleaned = -0.00300955 Jy ! Component: 1200 - total flux cleaned = -0.00307317 Jy ! Component: 1250 - total flux cleaned = -0.0030722 Jy ! Component: 1300 - total flux cleaned = -0.00310289 Jy ! Component: 1350 - total flux cleaned = -0.00304188 Jy ! Component: 1400 - total flux cleaned = -0.00298219 Jy ! Component: 1450 - total flux cleaned = -0.00292337 Jy ! Component: 1500 - total flux cleaned = -0.0029528 Jy ! Component: 1550 - total flux cleaned = -0.00289537 Jy ! Component: 1600 - total flux cleaned = -0.0028669 Jy ! Component: 1650 - total flux cleaned = -0.00278304 Jy ! Component: 1700 - total flux cleaned = -0.00275536 Jy ! Component: 1750 - total flux cleaned = -0.00272808 Jy ! Component: 1800 - total flux cleaned = -0.00264736 Jy ! Component: 1850 - total flux cleaned = -0.00262066 Jy ! Component: 1900 - total flux cleaned = -0.00259437 Jy ! Component: 1950 - total flux cleaned = -0.00259421 Jy ! Component: 2000 - total flux cleaned = -0.0025171 Jy ! Component: 2050 - total flux cleaned = -0.00238946 Jy ! Component: 2100 - total flux cleaned = -0.00231392 Jy ! Component: 2150 - total flux cleaned = -0.00226391 Jy ! Component: 2200 - total flux cleaned = -0.00216486 Jy ! Component: 2250 - total flux cleaned = -0.00209121 Jy ! Component: 2300 - total flux cleaned = -0.0020184 Jy ! Component: 2350 - total flux cleaned = -0.00204297 Jy ! Component: 2400 - total flux cleaned = -0.00206696 Jy ! Component: 2450 - total flux cleaned = -0.00209097 Jy ! Component: 2500 - total flux cleaned = -0.00211461 Jy ! Component: 2550 - total flux cleaned = -0.00213829 Jy ! Component: 2600 - total flux cleaned = -0.002209 Jy ! Component: 2650 - total flux cleaned = -0.0022327 Jy ! Component: 2700 - total flux cleaned = -0.00235018 Jy ! Component: 2750 - total flux cleaned = -0.00239712 Jy ! Component: 2800 - total flux cleaned = -0.00249081 Jy ! Component: 2850 - total flux cleaned = -0.00258439 Jy ! Component: 2900 - total flux cleaned = -0.00270125 Jy ! Component: 2950 - total flux cleaned = -0.00279452 Jy ! Component: 3000 - total flux cleaned = -0.00288772 Jy ! Component: 3050 - total flux cleaned = -0.00293449 Jy ! Component: 3100 - total flux cleaned = -0.00298109 Jy ! Component: 3150 - total flux cleaned = -0.00300459 Jy ! Component: 3200 - total flux cleaned = -0.00305108 Jy ! Component: 3250 - total flux cleaned = -0.00312096 Jy ! Component: 3300 - total flux cleaned = -0.00319101 Jy ! Component: 3350 - total flux cleaned = -0.00323782 Jy ! Component: 3400 - total flux cleaned = -0.00326113 Jy ! Component: 3450 - total flux cleaned = -0.00333138 Jy ! Component: 3500 - total flux cleaned = -0.00344873 Jy ! Component: 3550 - total flux cleaned = -0.00344891 Jy ! Component: 3600 - total flux cleaned = -0.00354314 Jy ! Component: 3650 - total flux cleaned = -0.0035903 Jy ! Component: 3700 - total flux cleaned = -0.00363746 Jy ! Component: 3750 - total flux cleaned = -0.00370852 Jy ! Component: 3800 - total flux cleaned = -0.00373216 Jy ! Component: 3850 - total flux cleaned = -0.00377982 Jy ! Component: 3900 - total flux cleaned = -0.00382751 Jy ! Component: 3950 - total flux cleaned = -0.00382754 Jy ! Component: 4000 - total flux cleaned = -0.00392353 Jy ! Component: 4050 - total flux cleaned = -0.00392355 Jy ! Total flux subtracted in 4096 components = -0.00394765 Jy ! Clean residual min=-0.001458 max=0.001559 Jy/beam ! Clean residual mean=-0.000000 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.298633 Jy keep ! Adding 188 model components to the UV plane model. ! The established model now contains 277 components and 0.298633 Jy ![Exited script file: muppet] wmap "J0112+2244_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 12.7 at -29.26 degrees (North through East) ! Clean map min=-0.0040894 max=0.25962 Jy/beam ! Writing clean map to FITS file: J0112+2244_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.259619 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000369746 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.427257 0.427257 0.854514 1.70903 3.41806 6.83611 13.6722 27.3444 54.6889 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.259 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 12.7 at -29.26 degrees (North through East) ! Clean map min=-0.0040894 max=0.25962 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0112+2244_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:48:00 2019