! Started logfile: J0112+2244_S_2017_07_16_pus_uvs.log on Thu May 9 10:56:48 2019 obs J0112+2244_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0112+2244_S_2017_07_16_pus_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0112+2244 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 3528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0112+2244_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 348 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.815752Jy sigma=0.007975 ! Fit after self-cal, rms=0.807286Jy sigma=0.007907 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=6.038 mas, bpa=-7.563 degrees ! Estimated noise=1681.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151089 Jy ! Component: 100 - total flux cleaned = 0.1863 Jy ! Total flux subtracted in 100 components = 0.1863 Jy ! Clean residual min=-0.009159 max=0.014819 Jy/beam ! Clean residual mean=-0.000030 rms=0.002696 Jy/beam ! Combined flux in latest and established models = 0.1863 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.1863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084463Jy sigma=0.000787 ! Fit after self-cal, rms=0.084462Jy sigma=0.000787 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=6.377 mas, bpa=-5.64 degrees ! Estimated noise=1413.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165326 Jy ! Component: 100 - total flux cleaned = 0.0248272 Jy ! Component: 150 - total flux cleaned = 0.0297398 Jy ! Component: 200 - total flux cleaned = 0.030338 Jy ! Total flux subtracted in 200 components = 0.030338 Jy ! Clean residual min=-0.008616 max=0.012375 Jy/beam ! Clean residual mean=-0.000019 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 0.216638 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.216638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081206Jy sigma=0.000755 ! Fit after self-cal, rms=0.081175Jy sigma=0.000755 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 0.91 KP 0.96 ! LA 1.02 MK 1.00 NL 0.87 OV 0.95 ! PT 0.96 SC 0.92 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.45 FD 1.00* HN 0.99 KP 0.93 ! LA 1.04 MK 1.03 NL 1.03 OV 1.03 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* HN 0.96 KP 0.90 ! LA 1.05 MK 1.09 NL 1.09 OV 0.91 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.081175Jy sigma=0.000755 ! Fit after self-cal, rms=0.080007Jy sigma=0.000711 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=6.49 mas, bpa=-4.583 degrees ! Estimated noise=1418.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190575 Jy ! Component: 100 - total flux cleaned = -0.00264363 Jy ! Component: 150 - total flux cleaned = -0.00315805 Jy ! Component: 200 - total flux cleaned = -0.00344629 Jy ! Total flux subtracted in 200 components = -0.00344629 Jy ! Clean residual min=-0.007927 max=0.009040 Jy/beam ! Clean residual mean=-0.000010 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.213192 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.213192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079688Jy sigma=0.000709 ! Fit after self-cal, rms=0.079758Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079758Jy sigma=0.000709 ! Fit after self-cal, rms=0.078572Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=6.455 mas, bpa=-4.246 degrees ! Estimated noise=1418.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000875759 Jy ! Component: 100 - total flux cleaned = -0.000643003 Jy ! Component: 150 - total flux cleaned = -0.000461228 Jy ! Component: 200 - total flux cleaned = -0.000359698 Jy ! Total flux subtracted in 200 components = -0.000359698 Jy ! Clean residual min=-0.004557 max=0.005361 Jy/beam ! Clean residual mean=-0.000002 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.212832 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.212832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078465Jy sigma=0.000656 ! Fit after self-cal, rms=0.078581Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29, -31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465836 Jy ! Component: 100 - total flux cleaned = 0.00595544 Jy ! Component: 150 - total flux cleaned = 0.00648905 Jy ! Component: 200 - total flux cleaned = 0.00667407 Jy ! Total flux subtracted in 200 components = 0.00667407 Jy ! Clean residual min=-0.004359 max=0.003355 Jy/beam ! Clean residual mean=0.000003 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.219506 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 0.219506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078269Jy sigma=0.000652 ! Fit after self-cal, rms=0.078238Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078238Jy sigma=0.000652 ! Fit after self-cal, rms=0.078608Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=6.453 mas, bpa=-4.396 degrees ! Estimated noise=1414.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130242 Jy ! Component: 100 - total flux cleaned = 0.00185342 Jy ! Component: 150 - total flux cleaned = 0.00227623 Jy ! Component: 200 - total flux cleaned = 0.00251034 Jy ! Total flux subtracted in 200 components = 0.00251034 Jy ! Clean residual min=-0.004078 max=0.003458 Jy/beam ! Clean residual mean=0.000005 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.222016 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 0.222016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078524Jy sigma=0.000651 ! Fit after self-cal, rms=0.078523Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000682592 Jy ! Component: 100 - total flux cleaned = 0.000922533 Jy ! Component: 150 - total flux cleaned = 0.000995748 Jy ! Component: 200 - total flux cleaned = 0.0010962 Jy ! Total flux subtracted in 200 components = 0.0010962 Jy ! Clean residual min=-0.003983 max=0.003422 Jy/beam ! Clean residual mean=0.000005 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.223113 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 0.223113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078488Jy sigma=0.000650 ! Fit after self-cal, rms=0.078484Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078484Jy sigma=0.000650 ! Fit after self-cal, rms=0.078562Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.932 mas, bmaj=9.714 mas, bpa=-8.801 degrees ! Estimated noise=1814.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128599 Jy ! Component: 100 - total flux cleaned = 0.00168192 Jy ! Component: 150 - total flux cleaned = 0.00188701 Jy ! Component: 200 - total flux cleaned = 0.00202512 Jy ! Total flux subtracted in 200 components = 0.00202512 Jy ! Clean residual min=-0.004342 max=0.004029 Jy/beam ! Clean residual mean=0.000014 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.225138 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.225138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078544Jy sigma=0.000650 ! Fit after self-cal, rms=0.078536Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013504 Jy ! Component: 100 - total flux cleaned = 0.0002958 Jy ! Component: 150 - total flux cleaned = 0.000409026 Jy ! Component: 200 - total flux cleaned = 0.000459907 Jy ! Total flux subtracted in 200 components = 0.000459907 Jy ! Clean residual min=-0.004353 max=0.004025 Jy/beam ! Clean residual mean=0.000015 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.225598 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 95 components and 0.225598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078542Jy sigma=0.000650 ! Fit after self-cal, rms=0.078532Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=6.454 mas, bpa=-4.481 degrees ! Estimated noise=1413.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.103 x 6.454 at -4.481 degrees (North through East) ! Clean map min=-0.0037512 max=0.19324 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=6.074 mas, bpa=-6.21 degrees ! Estimated noise=1657.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148402 Jy ! Component: 100 - total flux cleaned = 0.183837 Jy ! Component: 150 - total flux cleaned = 0.198857 Jy ! Component: 200 - total flux cleaned = 0.206844 Jy ! Total flux subtracted in 200 components = 0.206844 Jy ! Clean residual min=-0.004634 max=0.004480 Jy/beam ! Clean residual mean=-0.000005 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.206844 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.206844 Jy ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=6.454 mas, bpa=-4.481 degrees ! Estimated noise=1413.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649901 Jy ! Component: 100 - total flux cleaned = 0.0107372 Jy ! Component: 150 - total flux cleaned = 0.0125636 Jy ! Component: 200 - total flux cleaned = 0.0142728 Jy ! Total flux subtracted in 200 components = 0.0142728 Jy ! Clean residual min=-0.004230 max=0.003339 Jy/beam ! Clean residual mean=0.000004 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.221117 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.221117 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.932 mas, bmaj=9.714 mas, bpa=-8.801 degrees ! Estimated noise=1814.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282456 Jy ! Component: 100 - total flux cleaned = 0.00356812 Jy ! Component: 150 - total flux cleaned = 0.0041385 Jy ! Component: 200 - total flux cleaned = 0.00466985 Jy ! Total flux subtracted in 200 components = 0.00466985 Jy ! Clean residual min=-0.004181 max=0.003695 Jy/beam ! Clean residual mean=0.000015 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.225787 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325236 Jy ! Component: 100 - total flux cleaned = 0.000489956 Jy ! Component: 150 - total flux cleaned = 0.000640621 Jy ! Component: 200 - total flux cleaned = 0.000780661 Jy ! Total flux subtracted in 200 components = 0.000780661 Jy ! Clean residual min=-0.004142 max=0.003580 Jy/beam ! Clean residual mean=0.000016 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.226568 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 68 components and 0.226568 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=6.454 mas, bpa=-4.481 degrees ! Estimated noise=1413.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000706814 Jy ! Component: 100 - total flux cleaned = -0.00103081 Jy ! Component: 150 - total flux cleaned = -0.00109348 Jy ! Component: 200 - total flux cleaned = -0.00104557 Jy ! Total flux subtracted in 200 components = -0.00104557 Jy ! Clean residual min=-0.003950 max=0.003047 Jy/beam ! Clean residual mean=0.000006 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.225522 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.225522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078484Jy sigma=0.000649 ! Fit after self-cal, rms=0.078470Jy sigma=0.000649 wmodel J0112+2244_S_2017_07_16_pus_map.mod ! Writing 83 model components to file: J0112+2244_S_2017_07_16_pus_map.mod wobs J0112+2244_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0112+2244_S_2017_07_16_pus_uvs.fits wwins J0112+2244_S_2017_07_16_pus_map.win ! wwins: Wrote 3 windows to J0112+2244_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168308 Jy ! Component: 100 - total flux cleaned = -0.00273745 Jy ! Component: 150 - total flux cleaned = -0.00317547 Jy ! Component: 200 - total flux cleaned = -0.00327882 Jy ! Component: 250 - total flux cleaned = -0.003377 Jy ! Component: 300 - total flux cleaned = -0.00342341 Jy ! Component: 350 - total flux cleaned = -0.00356044 Jy ! Component: 400 - total flux cleaned = -0.00373606 Jy ! Component: 450 - total flux cleaned = -0.00386381 Jy ! Component: 500 - total flux cleaned = -0.00398955 Jy ! Component: 550 - total flux cleaned = -0.00415331 Jy ! Component: 600 - total flux cleaned = -0.00415416 Jy ! Component: 650 - total flux cleaned = -0.00423242 Jy ! Component: 700 - total flux cleaned = -0.00427083 Jy ! Component: 750 - total flux cleaned = -0.00430825 Jy ! Component: 800 - total flux cleaned = -0.00434514 Jy ! Component: 850 - total flux cleaned = -0.00427286 Jy ! Component: 900 - total flux cleaned = -0.00406143 Jy ! Component: 950 - total flux cleaned = -0.00402731 Jy ! Component: 1000 - total flux cleaned = -0.00392557 Jy ! Component: 1050 - total flux cleaned = -0.0038594 Jy ! Component: 1100 - total flux cleaned = -0.00379332 Jy ! Component: 1150 - total flux cleaned = -0.00376124 Jy ! Component: 1200 - total flux cleaned = -0.0037285 Jy ! Component: 1250 - total flux cleaned = -0.00369652 Jy ! Component: 1300 - total flux cleaned = -0.00360367 Jy ! Component: 1350 - total flux cleaned = -0.00354285 Jy ! Component: 1400 - total flux cleaned = -0.0036036 Jy ! Component: 1450 - total flux cleaned = -0.00348462 Jy ! Component: 1500 - total flux cleaned = -0.00351344 Jy ! Component: 1550 - total flux cleaned = -0.00345544 Jy ! Component: 1600 - total flux cleaned = -0.00351258 Jy ! Component: 1650 - total flux cleaned = -0.00345606 Jy ! Component: 1700 - total flux cleaned = -0.00356813 Jy ! Component: 1750 - total flux cleaned = -0.00356867 Jy ! Component: 1800 - total flux cleaned = -0.0036232 Jy ! Component: 1850 - total flux cleaned = -0.00351539 Jy ! Component: 1900 - total flux cleaned = -0.00370243 Jy ! Component: 1950 - total flux cleaned = -0.00367589 Jy ! Component: 2000 - total flux cleaned = -0.00370225 Jy ! Component: 2050 - total flux cleaned = -0.00385767 Jy ! Component: 2100 - total flux cleaned = -0.00383208 Jy ! Component: 2150 - total flux cleaned = -0.00380691 Jy ! Component: 2200 - total flux cleaned = -0.00385692 Jy ! Component: 2250 - total flux cleaned = -0.00390663 Jy ! Component: 2300 - total flux cleaned = -0.00395563 Jy ! Component: 2350 - total flux cleaned = -0.00398025 Jy ! Component: 2400 - total flux cleaned = -0.00410119 Jy ! Component: 2450 - total flux cleaned = -0.00410092 Jy ! Component: 2500 - total flux cleaned = -0.00412446 Jy ! Component: 2550 - total flux cleaned = -0.0040307 Jy ! Component: 2600 - total flux cleaned = -0.00414728 Jy ! Component: 2650 - total flux cleaned = -0.00414713 Jy ! Component: 2700 - total flux cleaned = -0.00419252 Jy ! Component: 2750 - total flux cleaned = -0.00423751 Jy ! Component: 2800 - total flux cleaned = -0.00428237 Jy ! Component: 2850 - total flux cleaned = -0.00434918 Jy ! Component: 2900 - total flux cleaned = -0.00443754 Jy ! Component: 2950 - total flux cleaned = -0.0044596 Jy ! Component: 3000 - total flux cleaned = -0.00450301 Jy ! Component: 3050 - total flux cleaned = -0.00458903 Jy ! Component: 3100 - total flux cleaned = -0.00461029 Jy ! Component: 3150 - total flux cleaned = -0.00456784 Jy ! Component: 3200 - total flux cleaned = -0.00465166 Jy ! Component: 3250 - total flux cleaned = -0.00469334 Jy ! Component: 3300 - total flux cleaned = -0.00467257 Jy ! Component: 3350 - total flux cleaned = -0.00473417 Jy ! Component: 3400 - total flux cleaned = -0.00473402 Jy ! Component: 3450 - total flux cleaned = -0.0047543 Jy ! Component: 3500 - total flux cleaned = -0.00481457 Jy ! Component: 3550 - total flux cleaned = -0.00481442 Jy ! Component: 3600 - total flux cleaned = -0.00481456 Jy ! Component: 3650 - total flux cleaned = -0.00479502 Jy ! Component: 3700 - total flux cleaned = -0.00481445 Jy ! Component: 3750 - total flux cleaned = -0.00481449 Jy ! Component: 3800 - total flux cleaned = -0.00483379 Jy ! Component: 3850 - total flux cleaned = -0.00485296 Jy ! Component: 3900 - total flux cleaned = -0.00487198 Jy ! Component: 3950 - total flux cleaned = -0.00492853 Jy ! Component: 4000 - total flux cleaned = -0.00483464 Jy ! Component: 4050 - total flux cleaned = -0.00483467 Jy ! Total flux subtracted in 4096 components = -0.00489017 Jy ! Clean residual min=-0.001049 max=0.001216 Jy/beam ! Clean residual mean=0.000004 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.220632 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 414 components and 0.220632 Jy ![Exited script file: muppet] wmap "J0112+2244_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.103 x 6.454 at -4.481 degrees (North through East) ! Clean map min=-0.0029653 max=0.19313 Jy/beam ! Writing clean map to FITS file: J0112+2244_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.193135 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000341231 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.530041 0.530041 1.06008 2.12016 4.24033 8.48065 16.9613 33.9226 67.8452 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.193 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.103 x 6.454 at -4.481 degrees (North through East) ! Clean map min=-0.0029653 max=0.19313 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0112+2244_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:56:53 2019