! Started logfile: J0112+2244_S_2017_06_10_pus_uvs.log on Mon May 6 14:41:05 2019 obs J0112+2244_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0112+2244_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.551111 visibilities/baseline/integration-bin. ! Found source: J0112+2244 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0112+2244_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.828674Jy sigma=0.009710 ! Fit after self-cal, rms=0.826034Jy sigma=0.009681 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.95 mas, bmaj=8.527 mas, bpa=-3.052 degrees ! Estimated noise=2721.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135063 Jy ! Component: 100 - total flux cleaned = 0.166278 Jy ! Total flux subtracted in 100 components = 0.166278 Jy ! Clean residual min=-0.009760 max=0.011586 Jy/beam ! Clean residual mean=0.000044 rms=0.002997 Jy/beam ! Combined flux in latest and established models = 0.166278 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.166278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065099Jy sigma=0.000734 ! Fit after self-cal, rms=0.065063Jy sigma=0.000733 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.342 mas, bmaj=9.499 mas, bpa=0.976 degrees ! Estimated noise=2163.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149553 Jy ! Component: 100 - total flux cleaned = 0.0217994 Jy ! Component: 150 - total flux cleaned = 0.0255925 Jy ! Component: 200 - total flux cleaned = 0.0279153 Jy ! Total flux subtracted in 200 components = 0.0279153 Jy ! Clean residual min=-0.007583 max=0.007547 Jy/beam ! Clean residual mean=0.000046 rms=0.001976 Jy/beam ! Combined flux in latest and established models = 0.194194 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 32 components and 0.194194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061662Jy sigma=0.000698 ! Fit after self-cal, rms=0.061656Jy sigma=0.000697 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.98 KP 1.06 ! LA 0.99 MK 1.00* NL 0.87 OV 1.03 ! PT 1.04 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.02 KP 0.98 ! LA 0.96 MK 1.00* NL 1.02 OV 1.10 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.03 KP 0.95 ! LA 0.94 MK 1.00* NL 1.19 OV 0.99 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.99 KP 1.00* ! LA 0.84 MK 1.00* NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.061656Jy sigma=0.000697 ! Fit after self-cal, rms=0.058708Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.331 mas, bmaj=9.507 mas, bpa=1.108 degrees ! Estimated noise=2162.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000869603 Jy ! Component: 100 - total flux cleaned = -0.000989639 Jy ! Component: 150 - total flux cleaned = -0.00114443 Jy ! Component: 200 - total flux cleaned = -0.00119465 Jy ! Total flux subtracted in 200 components = -0.00119465 Jy ! Clean residual min=-0.004989 max=0.005846 Jy/beam ! Clean residual mean=0.000017 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.192999 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.192999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058652Jy sigma=0.000672 ! Fit after self-cal, rms=0.058649Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058649Jy sigma=0.000672 ! Fit after self-cal, rms=0.058518Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.327 mas, bmaj=9.519 mas, bpa=1.224 degrees ! Estimated noise=2158.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00071874 Jy ! Component: 100 - total flux cleaned = -0.000824809 Jy ! Component: 150 - total flux cleaned = -0.000888126 Jy ! Component: 200 - total flux cleaned = -0.000886793 Jy ! Total flux subtracted in 200 components = -0.000886793 Jy ! Clean residual min=-0.004926 max=0.005858 Jy/beam ! Clean residual mean=0.000016 rms=0.001509 Jy/beam ! Combined flux in latest and established models = 0.192112 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.192112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058492Jy sigma=0.000671 ! Fit after self-cal, rms=0.058491Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.69143e-05 Jy ! Component: 100 - total flux cleaned = -7.66709e-05 Jy ! Component: 150 - total flux cleaned = -5.97332e-05 Jy ! Component: 200 - total flux cleaned = -7.59646e-05 Jy ! Total flux subtracted in 200 components = -7.59646e-05 Jy ! Clean residual min=-0.004858 max=0.005839 Jy/beam ! Clean residual mean=0.000017 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.192036 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.192036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058479Jy sigma=0.000671 ! Fit after self-cal, rms=0.058478Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058478Jy sigma=0.000671 ! Fit after self-cal, rms=0.058385Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.324 mas, bmaj=9.532 mas, bpa=1.32 degrees ! Estimated noise=2155.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000582641 Jy ! Component: 100 - total flux cleaned = -0.000675116 Jy ! Component: 150 - total flux cleaned = -0.000720622 Jy ! Component: 200 - total flux cleaned = -0.000761894 Jy ! Total flux subtracted in 200 components = -0.000761894 Jy ! Clean residual min=-0.004821 max=0.005838 Jy/beam ! Clean residual mean=0.000016 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 0.191274 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.191274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058373Jy sigma=0.000671 ! Fit after self-cal, rms=0.058372Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.35914e-05 Jy ! Component: 100 - total flux cleaned = -0.000102191 Jy ! Component: 150 - total flux cleaned = -0.000115575 Jy ! Component: 200 - total flux cleaned = -0.00012845 Jy ! Total flux subtracted in 200 components = -0.00012845 Jy ! Clean residual min=-0.004797 max=0.005824 Jy/beam ! Clean residual mean=0.000017 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.191146 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.191146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058365Jy sigma=0.000671 ! Fit after self-cal, rms=0.058364Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058364Jy sigma=0.000671 ! Fit after self-cal, rms=0.058308Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.721 mas, bmaj=13.6 mas, bpa=-15.76 degrees ! Estimated noise=2486.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00045766 Jy ! Component: 100 - total flux cleaned = -0.000492053 Jy ! Component: 150 - total flux cleaned = -0.000519132 Jy ! Component: 200 - total flux cleaned = -0.000519254 Jy ! Total flux subtracted in 200 components = -0.000519254 Jy ! Clean residual min=-0.004679 max=0.007705 Jy/beam ! Clean residual mean=0.000029 rms=0.001875 Jy/beam ! Combined flux in latest and established models = 0.190627 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.190627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058305Jy sigma=0.000671 ! Fit after self-cal, rms=0.058303Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.05821e-05 Jy ! Component: 100 - total flux cleaned = -2.95499e-05 Jy ! Component: 150 - total flux cleaned = -2.90015e-05 Jy ! Component: 200 - total flux cleaned = -2.8463e-05 Jy ! Total flux subtracted in 200 components = -2.8463e-05 Jy ! Clean residual min=-0.004658 max=0.007737 Jy/beam ! Clean residual mean=0.000029 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 0.190598 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 0.190598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058307Jy sigma=0.000671 ! Fit after self-cal, rms=0.058308Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.323 mas, bmaj=9.542 mas, bpa=1.382 degrees ! Estimated noise=2153.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.323 x 9.542 at 1.382 degrees (North through East) ! Clean map min=-0.0046097 max=0.17195 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.934 mas, bmaj=8.534 mas, bpa=-2.37 degrees ! Estimated noise=2729.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135208 Jy ! Component: 100 - total flux cleaned = 0.167522 Jy ! Component: 150 - total flux cleaned = 0.179215 Jy ! Component: 200 - total flux cleaned = 0.184412 Jy ! Total flux subtracted in 200 components = 0.184412 Jy ! Clean residual min=-0.007203 max=0.007004 Jy/beam ! Clean residual mean=0.000013 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 0.184413 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.184413 Jy ! Inverting map and beam ! Estimated beam: bmin=4.323 mas, bmaj=9.542 mas, bpa=1.382 degrees ! Estimated noise=2153.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349309 Jy ! Component: 100 - total flux cleaned = 0.00413598 Jy ! Component: 150 - total flux cleaned = 0.00462704 Jy ! Component: 200 - total flux cleaned = 0.00508094 Jy ! Total flux subtracted in 200 components = 0.00508094 Jy ! Clean residual min=-0.005153 max=0.006142 Jy/beam ! Clean residual mean=0.000018 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.189494 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.189494 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.721 mas, bmaj=13.6 mas, bpa=-15.76 degrees ! Estimated noise=2486.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522808 Jy ! Component: 100 - total flux cleaned = 0.000521352 Jy ! Component: 150 - total flux cleaned = 0.000519389 Jy ! Component: 200 - total flux cleaned = 0.000554095 Jy ! Total flux subtracted in 200 components = 0.000554095 Jy ! Clean residual min=-0.004918 max=0.007781 Jy/beam ! Clean residual mean=0.000031 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.190048 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.95949e-06 Jy ! Component: 100 - total flux cleaned = -2.54091e-05 Jy ! Component: 150 - total flux cleaned = -6.88715e-05 Jy ! Component: 200 - total flux cleaned = -6.79541e-05 Jy ! Total flux subtracted in 200 components = -6.79541e-05 Jy ! Clean residual min=-0.004892 max=0.007748 Jy/beam ! Clean residual mean=0.000031 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 0.18998 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.18998 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.323 mas, bmaj=9.542 mas, bpa=1.382 degrees ! Estimated noise=2153.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.39465e-05 Jy ! Component: 100 - total flux cleaned = -0.000175337 Jy ! Component: 150 - total flux cleaned = -0.000140514 Jy ! Component: 200 - total flux cleaned = -0.000140713 Jy ! Total flux subtracted in 200 components = -0.000140713 Jy ! Clean residual min=-0.004738 max=0.006004 Jy/beam ! Clean residual mean=0.000018 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.189839 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.189839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058344Jy sigma=0.000671 ! Fit after self-cal, rms=0.058337Jy sigma=0.000671 wmodel J0112+2244_S_2017_06_10_pus_map.mod ! Writing 62 model components to file: J0112+2244_S_2017_06_10_pus_map.mod wobs J0112+2244_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0112+2244_S_2017_06_10_pus_uvs.fits wwins J0112+2244_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0112+2244_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247596 Jy ! Component: 100 - total flux cleaned = 0.00375642 Jy ! Component: 150 - total flux cleaned = 0.00475884 Jy ! Component: 200 - total flux cleaned = 0.00483286 Jy ! Component: 250 - total flux cleaned = 0.00450769 Jy ! Component: 300 - total flux cleaned = 0.00420127 Jy ! Component: 350 - total flux cleaned = 0.00402556 Jy ! Component: 400 - total flux cleaned = 0.00380256 Jy ! Component: 450 - total flux cleaned = 0.00348844 Jy ! Component: 500 - total flux cleaned = 0.00339129 Jy ! Component: 550 - total flux cleaned = 0.0032471 Jy ! Component: 600 - total flux cleaned = 0.00310773 Jy ! Component: 650 - total flux cleaned = 0.00288492 Jy ! Component: 700 - total flux cleaned = 0.00254067 Jy ! Component: 750 - total flux cleaned = 0.00233302 Jy ! Component: 800 - total flux cleaned = 0.0019312 Jy ! Component: 850 - total flux cleaned = 0.00165798 Jy ! Component: 900 - total flux cleaned = 0.00128034 Jy ! Component: 950 - total flux cleaned = 0.00109626 Jy ! Component: 1000 - total flux cleaned = 0.000845535 Jy ! Component: 1050 - total flux cleaned = 0.000600877 Jy ! Component: 1100 - total flux cleaned = 0.000395186 Jy ! Component: 1150 - total flux cleaned = 0.000159227 Jy ! Component: 1200 - total flux cleaned = -3.98672e-05 Jy ! Component: 1250 - total flux cleaned = -0.000236062 Jy ! Component: 1300 - total flux cleaned = -0.000429781 Jy ! Component: 1350 - total flux cleaned = -0.000589249 Jy ! Component: 1400 - total flux cleaned = -0.000747112 Jy ! Component: 1450 - total flux cleaned = -0.000903409 Jy ! Component: 1500 - total flux cleaned = -0.0011502 Jy ! Component: 1550 - total flux cleaned = -0.00124162 Jy ! Component: 1600 - total flux cleaned = -0.00142306 Jy ! Component: 1650 - total flux cleaned = -0.00160276 Jy ! Component: 1700 - total flux cleaned = -0.00175136 Jy ! Component: 1750 - total flux cleaned = -0.00189872 Jy ! Component: 1800 - total flux cleaned = -0.00201616 Jy ! Component: 1850 - total flux cleaned = -0.00216229 Jy ! Component: 1900 - total flux cleaned = -0.00227875 Jy ! Component: 1950 - total flux cleaned = -0.00236612 Jy ! Component: 2000 - total flux cleaned = -0.00248223 Jy ! Component: 2050 - total flux cleaned = -0.002598 Jy ! Component: 2100 - total flux cleaned = -0.00265567 Jy ! Component: 2150 - total flux cleaned = -0.00274245 Jy ! Component: 2200 - total flux cleaned = -0.00280026 Jy ! Component: 2250 - total flux cleaned = -0.0028291 Jy ! Component: 2300 - total flux cleaned = -0.00291616 Jy ! Component: 2350 - total flux cleaned = -0.0029742 Jy ! Component: 2400 - total flux cleaned = -0.00306134 Jy ! Component: 2450 - total flux cleaned = -0.00311998 Jy ! Component: 2500 - total flux cleaned = -0.00320823 Jy ! Component: 2550 - total flux cleaned = -0.00326743 Jy ! Component: 2600 - total flux cleaned = -0.00332735 Jy ! Component: 2650 - total flux cleaned = -0.00338776 Jy ! Component: 2700 - total flux cleaned = -0.00344837 Jy ! Component: 2750 - total flux cleaned = -0.00347915 Jy ! Component: 2800 - total flux cleaned = -0.00354114 Jy ! Component: 2850 - total flux cleaned = -0.00354119 Jy ! Component: 2900 - total flux cleaned = -0.0036045 Jy ! Component: 2950 - total flux cleaned = -0.00360454 Jy ! Component: 3000 - total flux cleaned = -0.00363637 Jy ! Component: 3050 - total flux cleaned = -0.00366865 Jy ! Component: 3100 - total flux cleaned = -0.00366867 Jy ! Component: 3150 - total flux cleaned = -0.00366824 Jy ! Component: 3200 - total flux cleaned = -0.00370157 Jy ! Component: 3250 - total flux cleaned = -0.00366792 Jy ! Component: 3300 - total flux cleaned = -0.00363356 Jy ! Component: 3350 - total flux cleaned = -0.00366802 Jy ! Component: 3400 - total flux cleaned = -0.003633 Jy ! Component: 3450 - total flux cleaned = -0.00363293 Jy ! Component: 3500 - total flux cleaned = -0.00359708 Jy ! Component: 3550 - total flux cleaned = -0.00359669 Jy ! Component: 3600 - total flux cleaned = -0.00355995 Jy ! Component: 3650 - total flux cleaned = -0.00352303 Jy ! Component: 3700 - total flux cleaned = -0.00352303 Jy ! Component: 3750 - total flux cleaned = -0.00348526 Jy ! Component: 3800 - total flux cleaned = -0.00348528 Jy ! Component: 3850 - total flux cleaned = -0.0034079 Jy ! Component: 3900 - total flux cleaned = -0.0033683 Jy ! Component: 3950 - total flux cleaned = -0.00328835 Jy ! Component: 4000 - total flux cleaned = -0.00328794 Jy ! Component: 4050 - total flux cleaned = -0.00324724 Jy ! Total flux subtracted in 4096 components = -0.00320548 Jy ! Clean residual min=-0.002377 max=0.002226 Jy/beam ! Clean residual mean=-0.000019 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.186633 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 284 components and 0.186633 Jy ![Exited script file: muppet] wmap "J0112+2244_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.323 x 9.542 at 1.382 degrees (North through East) ! Clean map min=-0.0073946 max=0.17298 Jy/beam ! Writing clean map to FITS file: J0112+2244_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.172981 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000686708 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19095 1.19095 2.38191 4.76381 9.52763 19.0553 38.1105 76.221 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.172 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.323 x 9.542 at 1.382 degrees (North through East) ! Clean map min=-0.0073946 max=0.17298 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0112+2244_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:41:10 2019