! Started logfile: J0111-1422_S_2017_09_26_pus_uvs.log on Sat May 11 12:53:29 2019 obs J0111-1422_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0111-1422_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.360169 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0111-1422 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 15300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0111-1422_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1445 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2143 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.991260Jy sigma=0.008140 ! Fit after self-cal, rms=0.947926Jy sigma=0.007822 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.925 mas, bmaj=24.24 mas, bpa=-12.23 degrees ! Estimated noise=1613.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042941 Jy ! Component: 100 - total flux cleaned = 0.0534562 Jy ! Total flux subtracted in 100 components = 0.0534562 Jy ! Clean residual min=-0.004430 max=0.005123 Jy/beam ! Clean residual mean=-0.000021 rms=0.001460 Jy/beam ! Combined flux in latest and established models = 0.0534562 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0534562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076033Jy sigma=0.000589 ! Fit after self-cal, rms=0.074968Jy sigma=0.000580 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.731 mas, bmaj=28.59 mas, bpa=-11.46 degrees ! Estimated noise=862.591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263409 Jy ! Component: 100 - total flux cleaned = 0.00354865 Jy ! Component: 150 - total flux cleaned = 0.00375582 Jy ! Component: 200 - total flux cleaned = 0.00391788 Jy ! Total flux subtracted in 200 components = 0.00391788 Jy ! Clean residual min=-0.002496 max=0.002838 Jy/beam ! Clean residual mean=-0.000015 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.057374 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 50 components and 0.057374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074844Jy sigma=0.000580 ! Fit after self-cal, rms=0.074846Jy sigma=0.000580 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.91 KP 1.02 ! LA 1.04 MK 1.00* NL 0.98 OV 1.11 ! PT 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 1.00 KP 0.99 ! LA 0.95 MK 1.00* NL 1.07 OV 1.15 ! PT 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 1.06 KP 1.00 ! LA 0.95 MK 1.04 NL 1.01 OV 1.01 ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.74 KP 1.00* ! LA 0.90 MK 1.00* NL 1.00* OV 0.80 ! PT 0.86 ! ! ! Fit before self-cal, rms=0.074846Jy sigma=0.000580 ! Fit after self-cal, rms=0.073054Jy sigma=0.000579 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.688 mas, bmaj=28.43 mas, bpa=-11.38 degrees ! Estimated noise=874.726 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152275 Jy ! Component: 100 - total flux cleaned = 0.000246406 Jy ! Component: 150 - total flux cleaned = 0.000247477 Jy ! Component: 200 - total flux cleaned = 0.00024726 Jy ! Total flux subtracted in 200 components = 0.00024726 Jy ! Clean residual min=-0.001578 max=0.001948 Jy/beam ! Clean residual mean=0.000000 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0576213 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.0576213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073043Jy sigma=0.000579 ! Fit after self-cal, rms=0.072949Jy sigma=0.000578 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072949Jy sigma=0.000578 ! Fit after self-cal, rms=0.072651Jy sigma=0.000578 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.687 mas, bmaj=28.47 mas, bpa=-11.38 degrees ! Estimated noise=872.568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.62254e-05 Jy ! Component: 100 - total flux cleaned = 8.46514e-05 Jy ! Component: 150 - total flux cleaned = 6.96251e-05 Jy ! Component: 200 - total flux cleaned = 5.55007e-05 Jy ! Total flux subtracted in 200 components = 5.55007e-05 Jy ! Clean residual min=-0.001557 max=0.001705 Jy/beam ! Clean residual mean=-0.000005 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0576768 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.0576768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072643Jy sigma=0.000578 ! Fit after self-cal, rms=0.072640Jy sigma=0.000578 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.9125e-05 Jy ! Component: 100 - total flux cleaned = -5.52589e-05 Jy ! Component: 150 - total flux cleaned = -7.02571e-05 Jy ! Component: 200 - total flux cleaned = -9.83872e-05 Jy ! Total flux subtracted in 200 components = -9.83872e-05 Jy ! Clean residual min=-0.001598 max=0.001632 Jy/beam ! Clean residual mean=-0.000004 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0575784 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.0575784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072634Jy sigma=0.000578 ! Fit after self-cal, rms=0.072632Jy sigma=0.000578 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072632Jy sigma=0.000578 ! Fit after self-cal, rms=0.072764Jy sigma=0.000578 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.671 mas, bmaj=28.43 mas, bpa=-11.37 degrees ! Estimated noise=873.452 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348556 Jy ! Component: 100 - total flux cleaned = 0.000364138 Jy ! Component: 150 - total flux cleaned = 0.00034977 Jy ! Component: 200 - total flux cleaned = 0.000388776 Jy ! Total flux subtracted in 200 components = 0.000388776 Jy ! Clean residual min=-0.001574 max=0.001689 Jy/beam ! Clean residual mean=-0.000003 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0579672 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.0579672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072758Jy sigma=0.000578 ! Fit after self-cal, rms=0.072769Jy sigma=0.000578 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.7441e-05 Jy ! Component: 100 - total flux cleaned = 2.12347e-05 Jy ! Component: 150 - total flux cleaned = 3.5214e-05 Jy ! Component: 200 - total flux cleaned = 3.50566e-05 Jy ! Total flux subtracted in 200 components = 3.50566e-05 Jy ! Clean residual min=-0.001625 max=0.001669 Jy/beam ! Clean residual mean=-0.000003 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0580023 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 79 components and 0.0580023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072763Jy sigma=0.000578 ! Fit after self-cal, rms=0.072757Jy sigma=0.000578 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072757Jy sigma=0.000578 ! Fit after self-cal, rms=0.072839Jy sigma=0.000578 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.926 mas, bmaj=32.82 mas, bpa=-7.57 degrees ! Estimated noise=926.103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367611 Jy ! Component: 100 - total flux cleaned = 0.000441427 Jy ! Component: 150 - total flux cleaned = 0.000486068 Jy ! Component: 200 - total flux cleaned = 0.000520392 Jy ! Total flux subtracted in 200 components = 0.000520392 Jy ! Clean residual min=-0.001482 max=0.001808 Jy/beam ! Clean residual mean=-0.000005 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0585227 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 90 components and 0.0585226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072836Jy sigma=0.000578 ! Fit after self-cal, rms=0.072842Jy sigma=0.000578 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.62868e-05 Jy ! Component: 100 - total flux cleaned = 4.60198e-05 Jy ! Component: 150 - total flux cleaned = 5.45445e-05 Jy ! Component: 200 - total flux cleaned = 7.08832e-05 Jy ! Total flux subtracted in 200 components = 7.08832e-05 Jy ! Clean residual min=-0.001484 max=0.001783 Jy/beam ! Clean residual mean=-0.000005 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0585935 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 94 components and 0.0585935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072840Jy sigma=0.000577 ! Fit after self-cal, rms=0.072836Jy sigma=0.000577 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.646 mas, bmaj=28.38 mas, bpa=-11.41 degrees ! Estimated noise=873.795 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.646 x 28.38 at -11.41 degrees (North through East) ! Clean map min=-0.0018244 max=0.055376 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.933 mas, bmaj=23.58 mas, bpa=-11.54 degrees ! Estimated noise=1551.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428058 Jy ! Component: 100 - total flux cleaned = 0.0531432 Jy ! Component: 150 - total flux cleaned = 0.0563599 Jy ! Component: 200 - total flux cleaned = 0.0575994 Jy ! Total flux subtracted in 200 components = 0.0575994 Jy ! Clean residual min=-0.003285 max=0.002911 Jy/beam ! Clean residual mean=-0.000006 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.0575994 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0575994 Jy ! Inverting map and beam ! Estimated beam: bmin=5.646 mas, bmaj=28.38 mas, bpa=-11.41 degrees ! Estimated noise=873.795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117809 Jy ! Component: 100 - total flux cleaned = 0.00128724 Jy ! Component: 150 - total flux cleaned = 0.00126049 Jy ! Component: 200 - total flux cleaned = 0.00123358 Jy ! Total flux subtracted in 200 components = 0.00123358 Jy ! Clean residual min=-0.001579 max=0.001914 Jy/beam ! Clean residual mean=-0.000004 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.058833 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.058833 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.926 mas, bmaj=32.82 mas, bpa=-7.57 degrees ! Estimated noise=926.103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.44763e-05 Jy ! Component: 100 - total flux cleaned = 5.61567e-05 Jy ! Component: 150 - total flux cleaned = 2.96438e-05 Jy ! Component: 200 - total flux cleaned = 3.98289e-06 Jy ! Total flux subtracted in 200 components = 3.98289e-06 Jy ! Clean residual min=-0.001488 max=0.001818 Jy/beam ! Clean residual mean=-0.000005 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.058837 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.1937e-05 Jy ! Component: 100 - total flux cleaned = -2.36155e-05 Jy ! Component: 150 - total flux cleaned = -2.37295e-05 Jy ! Component: 200 - total flux cleaned = -2.34994e-05 Jy ! Total flux subtracted in 200 components = -2.34994e-05 Jy ! Clean residual min=-0.001462 max=0.001795 Jy/beam ! Clean residual mean=-0.000005 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0588135 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 64 components and 0.0588135 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.646 mas, bmaj=28.38 mas, bpa=-11.41 degrees ! Estimated noise=873.795 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143361 Jy ! Component: 100 - total flux cleaned = -0.000205829 Jy ! Component: 150 - total flux cleaned = -0.0002064 Jy ! Component: 200 - total flux cleaned = -0.000206842 Jy ! Total flux subtracted in 200 components = -0.000206842 Jy ! Clean residual min=-0.001566 max=0.001788 Jy/beam ! Clean residual mean=-0.000003 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0586067 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.0586067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072843Jy sigma=0.000578 ! Fit after self-cal, rms=0.072845Jy sigma=0.000577 wmodel J0111-1422_S_2017_09_26_pus_map.mod ! Writing 71 model components to file: J0111-1422_S_2017_09_26_pus_map.mod wobs J0111-1422_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0111-1422_S_2017_09_26_pus_uvs.fits wwins J0111-1422_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0111-1422_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576083 Jy ! Component: 100 - total flux cleaned = 0.00076673 Jy ! Component: 150 - total flux cleaned = 0.000792843 Jy ! Component: 200 - total flux cleaned = 0.000792803 Jy ! Component: 250 - total flux cleaned = 0.000749524 Jy ! Component: 300 - total flux cleaned = 0.00071032 Jy ! Component: 350 - total flux cleaned = 0.000558283 Jy ! Component: 400 - total flux cleaned = 0.000415172 Jy ! Component: 450 - total flux cleaned = 0.000295635 Jy ! Component: 500 - total flux cleaned = 0.000148817 Jy ! Component: 550 - total flux cleaned = 0.000102051 Jy ! Component: 600 - total flux cleaned = -2.93338e-06 Jy ! Component: 650 - total flux cleaned = -6.08095e-05 Jy ! Component: 700 - total flux cleaned = -7.52275e-05 Jy ! Component: 750 - total flux cleaned = -8.89362e-05 Jy ! Component: 800 - total flux cleaned = -8.90861e-05 Jy ! Component: 850 - total flux cleaned = -8.9211e-05 Jy ! Component: 900 - total flux cleaned = -0.0001013 Jy ! Component: 950 - total flux cleaned = -0.00014835 Jy ! Component: 1000 - total flux cleaned = -0.000216892 Jy ! Component: 1050 - total flux cleaned = -0.000250052 Jy ! Component: 1100 - total flux cleaned = -0.000174733 Jy ! Component: 1150 - total flux cleaned = -0.000122196 Jy ! Component: 1200 - total flux cleaned = -1.90113e-05 Jy ! Component: 1250 - total flux cleaned = 6.17483e-05 Jy ! Component: 1300 - total flux cleaned = 0.000161001 Jy ! Component: 1350 - total flux cleaned = 0.00027752 Jy ! Component: 1400 - total flux cleaned = 0.000382391 Jy ! Component: 1450 - total flux cleaned = 0.00043872 Jy ! Component: 1500 - total flux cleaned = 0.000466457 Jy ! Component: 1550 - total flux cleaned = 0.00050296 Jy ! Component: 1600 - total flux cleaned = 0.000556986 Jy ! Component: 1650 - total flux cleaned = 0.000601543 Jy ! Component: 1700 - total flux cleaned = 0.000636844 Jy ! Component: 1750 - total flux cleaned = 0.000663019 Jy ! Component: 1800 - total flux cleaned = 0.000680434 Jy ! Component: 1850 - total flux cleaned = 0.000697679 Jy ! Component: 1900 - total flux cleaned = 0.000723241 Jy ! Component: 1950 - total flux cleaned = 0.000731646 Jy ! Component: 2000 - total flux cleaned = 0.000748419 Jy ! Component: 2050 - total flux cleaned = 0.000781827 Jy ! Component: 2100 - total flux cleaned = 0.000806608 Jy ! Component: 2150 - total flux cleaned = 0.000839435 Jy ! Component: 2200 - total flux cleaned = 0.000847572 Jy ! Component: 2250 - total flux cleaned = 0.000888396 Jy ! Component: 2300 - total flux cleaned = 0.000937103 Jy ! Component: 2350 - total flux cleaned = 0.000985707 Jy ! Component: 2400 - total flux cleaned = 0.00102597 Jy ! Component: 2450 - total flux cleaned = 0.00108216 Jy ! Component: 2500 - total flux cleaned = 0.00109811 Jy ! Component: 2550 - total flux cleaned = 0.00113005 Jy ! Component: 2600 - total flux cleaned = 0.00117791 Jy ! Component: 2650 - total flux cleaned = 0.00120975 Jy ! Component: 2700 - total flux cleaned = 0.00124956 Jy ! Component: 2750 - total flux cleaned = 0.00129714 Jy ! Component: 2800 - total flux cleaned = 0.00134461 Jy ! Component: 2850 - total flux cleaned = 0.00137625 Jy ! Component: 2900 - total flux cleaned = 0.00141582 Jy ! Component: 2950 - total flux cleaned = 0.00144739 Jy ! Component: 3000 - total flux cleaned = 0.0014711 Jy ! Component: 3050 - total flux cleaned = 0.00150268 Jy ! Component: 3100 - total flux cleaned = 0.00153427 Jy ! Component: 3150 - total flux cleaned = 0.00157376 Jy ! Component: 3200 - total flux cleaned = 0.00161331 Jy ! Component: 3250 - total flux cleaned = 0.00166083 Jy ! Component: 3300 - total flux cleaned = 0.00168458 Jy ! Component: 3350 - total flux cleaned = 0.0017242 Jy ! Component: 3400 - total flux cleaned = 0.00176395 Jy ! Component: 3450 - total flux cleaned = 0.0018038 Jy ! Component: 3500 - total flux cleaned = 0.00183567 Jy ! Component: 3550 - total flux cleaned = 0.00187568 Jy ! Component: 3600 - total flux cleaned = 0.00189175 Jy ! Component: 3650 - total flux cleaned = 0.00192387 Jy ! Component: 3700 - total flux cleaned = 0.00195612 Jy ! Component: 3750 - total flux cleaned = 0.00198852 Jy ! Component: 3800 - total flux cleaned = 0.00201278 Jy ! Component: 3850 - total flux cleaned = 0.00204528 Jy ! Component: 3900 - total flux cleaned = 0.00208605 Jy ! Component: 3950 - total flux cleaned = 0.0021024 Jy ! Component: 4000 - total flux cleaned = 0.00212705 Jy ! Component: 4050 - total flux cleaned = 0.0021353 Jy ! Total flux subtracted in 4096 components = 0.00216852 Jy ! Clean residual min=-0.000452 max=0.000465 Jy/beam ! Clean residual mean=0.000002 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.0607752 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 314 components and 0.0607752 Jy ![Exited script file: muppet] wmap "J0111-1422_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.646 x 28.38 at -11.41 degrees (North through East) ! Clean map min=-0.0017402 max=0.05469 Jy/beam ! Writing clean map to FITS file: J0111-1422_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0546905 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000142712 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.782836 0.782836 1.56567 3.13134 6.26268 12.5254 25.0507 50.1015 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.646 x 28.38 at -11.41 degrees (North through East) ! Clean map min=-0.0017402 max=0.05469 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0111-1422_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:53:34 2019