! Started logfile: J0111-1422_S_2017_04_28_pus_uvs.log on Thu May 2 16:14:41 2019 obs J0111-1422_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0111-1422_S_2017_04_28_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.820996 visibilities/baseline/integration-bin. ! Found source: J0111-1422 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 21428 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0111-1422_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 756 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007035Jy sigma=0.032138 ! Fit after self-cal, rms=0.956463Jy sigma=0.031945 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=8.277 mas, bpa=-9.245 degrees ! Estimated noise=1024.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235714 Jy ! Component: 100 - total flux cleaned = 0.0240887 Jy ! Total flux subtracted in 100 components = 0.0240887 Jy ! Clean residual min=-0.010342 max=0.009747 Jy/beam ! Clean residual mean=0.000048 rms=0.003259 Jy/beam ! Combined flux in latest and established models = 0.0240887 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0240887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117376Jy sigma=0.001006 ! Fit after self-cal, rms=0.116514Jy sigma=0.000956 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.983 mas, bmaj=10.06 mas, bpa=-5.598 degrees ! Estimated noise=506.082 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348284 Jy ! Component: 100 - total flux cleaned = 0.00282538 Jy ! Component: 150 - total flux cleaned = 0.00213569 Jy ! Component: 200 - total flux cleaned = 0.00151647 Jy ! Total flux subtracted in 200 components = 0.00151647 Jy ! Clean residual min=-0.008280 max=0.008936 Jy/beam ! Clean residual mean=0.000042 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 0.0256051 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.0256051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115064Jy sigma=0.001030 ! Fit after self-cal, rms=0.114857Jy sigma=0.001030 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.77 HN 0.85 KP 0.75 ! LA 0.73 MK 0.79 NL 0.77 OV 0.80 ! PT 0.81 SC 0.85 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.69 HN 0.85 KP 0.77 ! LA 0.65 MK 0.71 NL 0.87 OV 0.85 ! PT 0.85 SC 0.80 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.71 HN 0.78 KP 0.78 ! LA 0.66 MK 0.79 NL 0.77 OV 0.69 ! PT 0.75 SC 0.98 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.19 HN 1.19 KP 1.00* ! LA 7.87 MK 0.93 NL 1.00* OV 1.00* ! PT 1.33 SC 1.00* ! ! ! Fit before self-cal, rms=0.114857Jy sigma=0.001030 ! Fit after self-cal, rms=0.171470Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=8.858 mas, bpa=-2.67 degrees ! Estimated noise=513.476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106781 Jy ! Component: 100 - total flux cleaned = 0.00132212 Jy ! Component: 150 - total flux cleaned = 0.00142799 Jy ! Component: 200 - total flux cleaned = 0.0015043 Jy ! Total flux subtracted in 200 components = 0.0015043 Jy ! Clean residual min=-0.001351 max=0.001654 Jy/beam ! Clean residual mean=-0.000001 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0271094 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.0271094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171442Jy sigma=0.000641 ! Fit after self-cal, rms=0.171240Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171240Jy sigma=0.000639 ! Fit after self-cal, rms=0.232986Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.643 mas, bmaj=8.807 mas, bpa=-3.834 degrees ! Estimated noise=502.936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451466 Jy ! Component: 100 - total flux cleaned = 0.000498079 Jy ! Component: 150 - total flux cleaned = 0.000538145 Jy ! Component: 200 - total flux cleaned = 0.000573315 Jy ! Total flux subtracted in 200 components = 0.000573315 Jy ! Clean residual min=-0.001175 max=0.001475 Jy/beam ! Clean residual mean=0.000001 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.0276828 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.0276828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232981Jy sigma=0.000636 ! Fit after self-cal, rms=0.232943Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-113, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144129 Jy ! Component: 100 - total flux cleaned = 0.00189296 Jy ! Component: 150 - total flux cleaned = 0.00201201 Jy ! Component: 200 - total flux cleaned = 0.00211959 Jy ! Total flux subtracted in 200 components = 0.00211959 Jy ! Clean residual min=-0.001273 max=0.001209 Jy/beam ! Clean residual mean=0.000002 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.0298024 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 0.0298023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232887Jy sigma=0.000635 ! Fit after self-cal, rms=0.232886Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232886Jy sigma=0.000635 ! Fit after self-cal, rms=0.334938Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=8.781 mas, bpa=-4.33 degrees ! Estimated noise=502.127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010951 Jy ! Component: 100 - total flux cleaned = 0.00143934 Jy ! Component: 150 - total flux cleaned = 0.00156914 Jy ! Component: 200 - total flux cleaned = 0.00162681 Jy ! Total flux subtracted in 200 components = 0.00162681 Jy ! Clean residual min=-0.001239 max=0.001221 Jy/beam ! Clean residual mean=0.000002 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.0314292 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.0314292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334896Jy sigma=0.000634 ! Fit after self-cal, rms=0.334883Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853579 Jy ! Component: 100 - total flux cleaned = 0.00102095 Jy ! Component: 150 - total flux cleaned = 0.00116524 Jy ! Component: 200 - total flux cleaned = 0.00123122 Jy ! Total flux subtracted in 200 components = 0.00123122 Jy ! Clean residual min=-0.001173 max=0.001123 Jy/beam ! Clean residual mean=0.000002 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.0326604 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 0.0326604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334853Jy sigma=0.000633 ! Fit after self-cal, rms=0.334850Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334850Jy sigma=0.000633 ! Fit after self-cal, rms=0.410726Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.028 mas, bmaj=15.42 mas, bpa=1.702 degrees ! Estimated noise=584.628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000680526 Jy ! Component: 100 - total flux cleaned = 0.00107956 Jy ! Component: 150 - total flux cleaned = 0.0012478 Jy ! Component: 200 - total flux cleaned = 0.00135599 Jy ! Total flux subtracted in 200 components = 0.00135599 Jy ! Clean residual min=-0.001256 max=0.001161 Jy/beam ! Clean residual mean=0.000005 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.0340164 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 0.0340164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410711Jy sigma=0.000633 ! Fit after self-cal, rms=0.410705Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455763 Jy ! Component: 100 - total flux cleaned = 0.000556864 Jy ! Component: 150 - total flux cleaned = 0.000641385 Jy ! Component: 200 - total flux cleaned = 0.000719534 Jy ! Total flux subtracted in 200 components = 0.000719534 Jy ! Clean residual min=-0.001170 max=0.001127 Jy/beam ! Clean residual mean=0.000005 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0347359 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 0.0347359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410696Jy sigma=0.000633 ! Fit after self-cal, rms=0.410695Jy sigma=0.000633 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=8.737 mas, bpa=-4.48 degrees ! Estimated noise=502.957 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 8.737 at -4.48 degrees (North through East) ! Clean map min=-0.0014946 max=0.034675 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.736 mas, bmaj=7.175 mas, bpa=-6.643 degrees ! Estimated noise=1021.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0278327 Jy ! Component: 100 - total flux cleaned = 0.0317833 Jy ! Component: 150 - total flux cleaned = 0.0324553 Jy ! Component: 200 - total flux cleaned = 0.0332551 Jy ! Total flux subtracted in 200 components = 0.0332551 Jy ! Clean residual min=-0.002365 max=0.002515 Jy/beam ! Clean residual mean=0.000004 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0332551 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0332551 Jy ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=8.737 mas, bpa=-4.48 degrees ! Estimated noise=502.957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107117 Jy ! Component: 100 - total flux cleaned = 0.00132627 Jy ! Component: 150 - total flux cleaned = 0.0015435 Jy ! Component: 200 - total flux cleaned = 0.00161967 Jy ! Total flux subtracted in 200 components = 0.00161967 Jy ! Clean residual min=-0.001187 max=0.001200 Jy/beam ! Clean residual mean=0.000003 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.0348748 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.0348748 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.028 mas, bmaj=15.42 mas, bpa=1.702 degrees ! Estimated noise=584.628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508028 Jy ! Component: 100 - total flux cleaned = 0.000592584 Jy ! Component: 150 - total flux cleaned = 0.000654759 Jy ! Component: 200 - total flux cleaned = 0.000708976 Jy ! Total flux subtracted in 200 components = 0.000708976 Jy ! Clean residual min=-0.001226 max=0.001126 Jy/beam ! Clean residual mean=0.000005 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.0355837 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.42335e-05 Jy ! Component: 100 - total flux cleaned = 2.41322e-05 Jy ! Component: 150 - total flux cleaned = 2.42364e-05 Jy ! Component: 200 - total flux cleaned = 1.48304e-05 Jy ! Total flux subtracted in 200 components = 1.48304e-05 Jy ! Clean residual min=-0.001220 max=0.001101 Jy/beam ! Clean residual mean=0.000005 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0355986 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.0355986 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=8.737 mas, bpa=-4.48 degrees ! Estimated noise=502.957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.41649e-05 Jy ! Component: 100 - total flux cleaned = 9.35343e-05 Jy ! Component: 150 - total flux cleaned = 9.42808e-05 Jy ! Component: 200 - total flux cleaned = 0.000118785 Jy ! Total flux subtracted in 200 components = 0.000118785 Jy ! Clean residual min=-0.001142 max=0.001124 Jy/beam ! Clean residual mean=0.000002 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.0357173 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.0357173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410690Jy sigma=0.000633 ! Fit after self-cal, rms=0.410698Jy sigma=0.000633 wmodel J0111-1422_S_2017_04_28_pus_map.mod ! Writing 53 model components to file: J0111-1422_S_2017_04_28_pus_map.mod wobs J0111-1422_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0111-1422_S_2017_04_28_pus_uvs.fits wwins J0111-1422_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0111-1422_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.33542e-05 Jy ! Component: 100 - total flux cleaned = -0.000153743 Jy ! Component: 150 - total flux cleaned = -0.000357679 Jy ! Component: 200 - total flux cleaned = -0.000464668 Jy ! Component: 250 - total flux cleaned = -0.000499258 Jy ! Component: 300 - total flux cleaned = -0.000583455 Jy ! Component: 350 - total flux cleaned = -0.000681462 Jy ! Component: 400 - total flux cleaned = -0.000697218 Jy ! Component: 450 - total flux cleaned = -0.000775575 Jy ! Component: 500 - total flux cleaned = -0.000867798 Jy ! Component: 550 - total flux cleaned = -0.000973218 Jy ! Component: 600 - total flux cleaned = -0.000988005 Jy ! Component: 650 - total flux cleaned = -0.00103165 Jy ! Component: 700 - total flux cleaned = -0.00106032 Jy ! Component: 750 - total flux cleaned = -0.00108841 Jy ! Component: 800 - total flux cleaned = -0.00115738 Jy ! Component: 850 - total flux cleaned = -0.00121182 Jy ! Component: 900 - total flux cleaned = -0.00127876 Jy ! Component: 950 - total flux cleaned = -0.00134437 Jy ! Component: 1000 - total flux cleaned = -0.00134431 Jy ! Component: 1050 - total flux cleaned = -0.00138294 Jy ! Component: 1100 - total flux cleaned = -0.00145884 Jy ! Component: 1150 - total flux cleaned = -0.00148356 Jy ! Component: 1200 - total flux cleaned = -0.00149609 Jy ! Component: 1250 - total flux cleaned = -0.00153289 Jy ! Component: 1300 - total flux cleaned = -0.00161733 Jy ! Component: 1350 - total flux cleaned = -0.00164131 Jy ! Component: 1400 - total flux cleaned = -0.00170036 Jy ! Component: 1450 - total flux cleaned = -0.00175846 Jy ! Component: 1500 - total flux cleaned = -0.00178118 Jy ! Component: 1550 - total flux cleaned = -0.00179249 Jy ! Component: 1600 - total flux cleaned = -0.00183752 Jy ! Component: 1650 - total flux cleaned = -0.00184869 Jy ! Component: 1700 - total flux cleaned = -0.00187064 Jy ! Component: 1750 - total flux cleaned = -0.00184882 Jy ! Component: 1800 - total flux cleaned = -0.00182721 Jy ! Component: 1850 - total flux cleaned = -0.00188049 Jy ! Component: 1900 - total flux cleaned = -0.00182737 Jy ! Component: 1950 - total flux cleaned = -0.00179589 Jy ! Component: 2000 - total flux cleaned = -0.00180622 Jy ! Component: 2050 - total flux cleaned = -0.00175464 Jy ! Component: 2100 - total flux cleaned = -0.00176497 Jy ! Component: 2150 - total flux cleaned = -0.00174467 Jy ! Component: 2200 - total flux cleaned = -0.00173461 Jy ! Component: 2250 - total flux cleaned = -0.00168479 Jy ! Component: 2300 - total flux cleaned = -0.00169458 Jy ! Component: 2350 - total flux cleaned = -0.00167495 Jy ! Component: 2400 - total flux cleaned = -0.00166535 Jy ! Component: 2450 - total flux cleaned = -0.00165568 Jy ! Component: 2500 - total flux cleaned = -0.00160798 Jy ! Component: 2550 - total flux cleaned = -0.00163643 Jy ! Component: 2600 - total flux cleaned = -0.0016082 Jy ! Component: 2650 - total flux cleaned = -0.00157086 Jy ! Component: 2700 - total flux cleaned = -0.00157098 Jy ! Component: 2750 - total flux cleaned = -0.00154339 Jy ! Component: 2800 - total flux cleaned = -0.00152517 Jy ! Component: 2850 - total flux cleaned = -0.00153426 Jy ! Component: 2900 - total flux cleaned = -0.00149817 Jy ! Component: 2950 - total flux cleaned = -0.00148919 Jy ! Component: 3000 - total flux cleaned = -0.00149799 Jy ! Component: 3050 - total flux cleaned = -0.00144505 Jy ! Component: 3100 - total flux cleaned = -0.0014363 Jy ! Component: 3150 - total flux cleaned = -0.00144499 Jy ! Component: 3200 - total flux cleaned = -0.00141896 Jy ! Component: 3250 - total flux cleaned = -0.00141886 Jy ! Component: 3300 - total flux cleaned = -0.00141035 Jy ! Component: 3350 - total flux cleaned = -0.00141881 Jy ! Component: 3400 - total flux cleaned = -0.00139345 Jy ! Component: 3450 - total flux cleaned = -0.00140173 Jy ! Component: 3500 - total flux cleaned = -0.0013766 Jy ! Component: 3550 - total flux cleaned = -0.00135175 Jy ! Component: 3600 - total flux cleaned = -0.00138465 Jy ! Component: 3650 - total flux cleaned = -0.00136822 Jy ! Component: 3700 - total flux cleaned = -0.00135185 Jy ! Component: 3750 - total flux cleaned = -0.0013357 Jy ! Component: 3800 - total flux cleaned = -0.00134374 Jy ! Component: 3850 - total flux cleaned = -0.00132781 Jy ! Component: 3900 - total flux cleaned = -0.00135168 Jy ! Component: 3950 - total flux cleaned = -0.00132005 Jy ! Component: 4000 - total flux cleaned = -0.00132792 Jy ! Component: 4050 - total flux cleaned = -0.0013201 Jy ! Total flux subtracted in 4096 components = -0.0013123 Jy ! Clean residual min=-0.000560 max=0.000447 Jy/beam ! Clean residual mean=0.000001 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.034405 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 302 components and 0.034405 Jy ![Exited script file: muppet] wmap "J0111-1422_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 8.737 at -4.48 degrees (North through East) ! Clean map min=-0.0012062 max=0.03412 Jy/beam ! Writing clean map to FITS file: J0111-1422_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0341197 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013793 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21276 1.21276 2.42552 4.85104 9.70207 19.4041 38.8083 77.6166 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.034 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 8.737 at -4.48 degrees (North through East) ! Clean map min=-0.0012062 max=0.03412 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0111-1422_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:14:47 2019