! Started logfile: J0110-1648_S_2017_04_28_pus_uvs.log on Thu May 2 16:14:24 2019 obs J0110-1648_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0110-1648_S_2017_04_28_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.551754 visibilities/baseline/integration-bin. ! Found source: J0110-1648 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 7548 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0110-1648_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 238 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 311 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 538 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.935279Jy sigma=0.032524 ! Fit after self-cal, rms=0.923219Jy sigma=0.032362 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.593 mas, bmaj=11.7 mas, bpa=10.18 degrees ! Estimated noise=1495.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0519833 Jy ! Component: 100 - total flux cleaned = 0.0577947 Jy ! Total flux subtracted in 100 components = 0.0577947 Jy ! Clean residual min=-0.015573 max=0.014442 Jy/beam ! Clean residual mean=0.000162 rms=0.005250 Jy/beam ! Combined flux in latest and established models = 0.0577947 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0577947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094563Jy sigma=0.001903 ! Fit after self-cal, rms=0.094392Jy sigma=0.001892 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.716 mas, bmaj=15.56 mas, bpa=8.893 degrees ! Estimated noise=933.003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0145556 Jy ! Component: 100 - total flux cleaned = -0.0208118 Jy ! Component: 150 - total flux cleaned = -0.0220717 Jy ! Component: 200 - total flux cleaned = -0.0231783 Jy ! Total flux subtracted in 200 components = -0.0231783 Jy ! Clean residual min=-0.015902 max=0.015885 Jy/beam ! Clean residual mean=0.000166 rms=0.006208 Jy/beam ! Combined flux in latest and established models = 0.0346165 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0346165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095362Jy sigma=0.001373 ! Fit after self-cal, rms=0.094900Jy sigma=0.001372 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.90 HN 1.30 KP 0.74 ! LA 0.67 MK 1.00* NL 0.97 OV 0.83 ! PT 0.76 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.75 HN 1.19 KP 0.73 ! LA 0.73 MK 1.00* NL 0.88 OV 0.92 ! PT 0.74 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.73 HN 1.00* KP 0.70 ! LA 0.70 MK 1.00* NL 0.91 OV 0.78 ! PT 0.70 SC 1.00* ! ! ! Correcting IF 4. ! A total of 222 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.094900Jy sigma=0.001372 ! Fit after self-cal, rms=0.068909Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.842 mas, bmaj=13.94 mas, bpa=9.16 degrees ! Estimated noise=992.608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213921 Jy ! Component: 100 - total flux cleaned = 0.00330196 Jy ! Component: 150 - total flux cleaned = 0.00361092 Jy ! Component: 200 - total flux cleaned = 0.00379047 Jy ! Total flux subtracted in 200 components = 0.00379047 Jy ! Clean residual min=-0.002457 max=0.003047 Jy/beam ! Clean residual mean=-0.000005 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.038407 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.038407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068826Jy sigma=0.000637 ! Fit after self-cal, rms=0.069460Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069460Jy sigma=0.000635 ! Fit after self-cal, rms=0.070582Jy sigma=0.000635 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.833 mas, bmaj=13.93 mas, bpa=9.448 degrees ! Estimated noise=1004.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158323 Jy ! Component: 100 - total flux cleaned = 0.00239346 Jy ! Component: 150 - total flux cleaned = 0.00253189 Jy ! Component: 200 - total flux cleaned = 0.00263516 Jy ! Total flux subtracted in 200 components = 0.00263516 Jy ! Clean residual min=-0.002375 max=0.002604 Jy/beam ! Clean residual mean=-0.000002 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0410421 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.0410421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070533Jy sigma=0.000634 ! Fit after self-cal, rms=0.070616Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394584 Jy ! Component: 100 - total flux cleaned = 0.000502891 Jy ! Component: 150 - total flux cleaned = 0.000560751 Jy ! Component: 200 - total flux cleaned = 0.000595947 Jy ! Total flux subtracted in 200 components = 0.000595947 Jy ! Clean residual min=-0.002362 max=0.002566 Jy/beam ! Clean residual mean=-0.000002 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.0416381 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.0416381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070600Jy sigma=0.000634 ! Fit after self-cal, rms=0.070623Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070623Jy sigma=0.000634 ! Fit after self-cal, rms=0.069988Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.776 mas, bmaj=13.79 mas, bpa=9.491 degrees ! Estimated noise=1019.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128675 Jy ! Component: 100 - total flux cleaned = 0.00194454 Jy ! Component: 150 - total flux cleaned = 0.00209041 Jy ! Component: 200 - total flux cleaned = 0.00220079 Jy ! Total flux subtracted in 200 components = 0.00220079 Jy ! Clean residual min=-0.002286 max=0.002570 Jy/beam ! Clean residual mean=-0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0438389 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0438389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069955Jy sigma=0.000633 ! Fit after self-cal, rms=0.069903Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020949 Jy ! Component: 100 - total flux cleaned = 0.00029632 Jy ! Component: 150 - total flux cleaned = 0.00032821 Jy ! Component: 200 - total flux cleaned = 0.000357278 Jy ! Total flux subtracted in 200 components = 0.000357278 Jy ! Clean residual min=-0.002273 max=0.002575 Jy/beam ! Clean residual mean=-0.000001 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0441961 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.0441961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069893Jy sigma=0.000633 ! Fit after self-cal, rms=0.069895Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069895Jy sigma=0.000633 ! Fit after self-cal, rms=0.069303Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.89 mas, bmaj=18.19 mas, bpa=2.934 degrees ! Estimated noise=1060.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109127 Jy ! Component: 100 - total flux cleaned = 0.00160577 Jy ! Component: 150 - total flux cleaned = 0.00174061 Jy ! Component: 200 - total flux cleaned = 0.00179085 Jy ! Total flux subtracted in 200 components = 0.00179085 Jy ! Clean residual min=-0.002103 max=0.002168 Jy/beam ! Clean residual mean=-0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.045987 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.045987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069287Jy sigma=0.000633 ! Fit after self-cal, rms=0.069245Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.36359e-05 Jy ! Component: 100 - total flux cleaned = 0.000100256 Jy ! Component: 150 - total flux cleaned = 0.000133971 Jy ! Component: 200 - total flux cleaned = 0.000157173 Jy ! Total flux subtracted in 200 components = 0.000157173 Jy ! Clean residual min=-0.002101 max=0.002158 Jy/beam ! Clean residual mean=-0.000001 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0461442 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.0461442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069241Jy sigma=0.000633 ! Fit after self-cal, rms=0.069243Jy sigma=0.000633 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.73 mas, bmaj=13.68 mas, bpa=9.512 degrees ! Estimated noise=1031.35 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.73 x 13.68 at 9.512 degrees (North through East) ! Clean map min=-0.0065085 max=0.062277 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.382 mas, bmaj=11.48 mas, bpa=11.51 degrees ! Estimated noise=1338.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.046128 Jy ! Component: 100 - total flux cleaned = 0.0539513 Jy ! Component: 150 - total flux cleaned = 0.0527143 Jy ! Component: 200 - total flux cleaned = 0.051979 Jy ! Total flux subtracted in 200 components = 0.051979 Jy ! Clean residual min=-0.003750 max=0.004071 Jy/beam ! Clean residual mean=-0.000002 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.051979 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.051979 Jy ! Inverting map and beam ! Estimated beam: bmin=5.73 mas, bmaj=13.68 mas, bpa=9.512 degrees ! Estimated noise=1031.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153494 Jy ! Component: 100 - total flux cleaned = -0.00216264 Jy ! Component: 150 - total flux cleaned = -0.00267767 Jy ! Component: 200 - total flux cleaned = -0.00316853 Jy ! Total flux subtracted in 200 components = -0.00316853 Jy ! Clean residual min=-0.002304 max=0.002508 Jy/beam ! Clean residual mean=0.000002 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0488105 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 0.0488105 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.89 mas, bmaj=18.19 mas, bpa=2.934 degrees ! Estimated noise=1060.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000651318 Jy ! Component: 100 - total flux cleaned = -0.000926293 Jy ! Component: 150 - total flux cleaned = -0.00109455 Jy ! Component: 200 - total flux cleaned = -0.00126939 Jy ! Total flux subtracted in 200 components = -0.00126939 Jy ! Clean residual min=-0.002070 max=0.002036 Jy/beam ! Clean residual mean=0.000001 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0475411 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150555 Jy ! Component: 100 - total flux cleaned = -0.000260886 Jy ! Component: 150 - total flux cleaned = -0.000378474 Jy ! Component: 200 - total flux cleaned = -0.000466217 Jy ! Total flux subtracted in 200 components = -0.000466217 Jy ! Clean residual min=-0.002047 max=0.002045 Jy/beam ! Clean residual mean=0.000001 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.0470749 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 44 components and 0.0470749 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.73 mas, bmaj=13.68 mas, bpa=9.512 degrees ! Estimated noise=1031.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.1866e-05 Jy ! Component: 100 - total flux cleaned = -1.62631e-05 Jy ! Component: 150 - total flux cleaned = -0.000113559 Jy ! Component: 200 - total flux cleaned = -0.000200146 Jy ! Total flux subtracted in 200 components = -0.000200146 Jy ! Clean residual min=-0.002104 max=0.002513 Jy/beam ! Clean residual mean=0.000000 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0468747 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.0468747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069248Jy sigma=0.000633 ! Fit after self-cal, rms=0.069281Jy sigma=0.000633 wmodel J0110-1648_S_2017_04_28_pus_map.mod ! Writing 56 model components to file: J0110-1648_S_2017_04_28_pus_map.mod wobs J0110-1648_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0110-1648_S_2017_04_28_pus_uvs.fits wwins J0110-1648_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J0110-1648_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702603 Jy ! Component: 100 - total flux cleaned = 0.00111511 Jy ! Component: 150 - total flux cleaned = 0.00138727 Jy ! Component: 200 - total flux cleaned = 0.00167256 Jy ! Component: 250 - total flux cleaned = 0.00179333 Jy ! Component: 300 - total flux cleaned = 0.00176509 Jy ! Component: 350 - total flux cleaned = 0.00176578 Jy ! Component: 400 - total flux cleaned = 0.00179299 Jy ! Component: 450 - total flux cleaned = 0.00187047 Jy ! Component: 500 - total flux cleaned = 0.00187016 Jy ! Component: 550 - total flux cleaned = 0.00199271 Jy ! Component: 600 - total flux cleaned = 0.00208828 Jy ! Component: 650 - total flux cleaned = 0.00218092 Jy ! Component: 700 - total flux cleaned = 0.00224829 Jy ! Component: 750 - total flux cleaned = 0.00229205 Jy ! Component: 800 - total flux cleaned = 0.00235652 Jy ! Component: 850 - total flux cleaned = 0.00237701 Jy ! Component: 900 - total flux cleaned = 0.00245996 Jy ! Component: 950 - total flux cleaned = 0.00248028 Jy ! Component: 1000 - total flux cleaned = 0.00258053 Jy ! Component: 1050 - total flux cleaned = 0.00263936 Jy ! Component: 1100 - total flux cleaned = 0.00262052 Jy ! Component: 1150 - total flux cleaned = 0.00269677 Jy ! Component: 1200 - total flux cleaned = 0.00273431 Jy ! Component: 1250 - total flux cleaned = 0.00277141 Jy ! Component: 1300 - total flux cleaned = 0.00277168 Jy ! Component: 1350 - total flux cleaned = 0.00282545 Jy ! Component: 1400 - total flux cleaned = 0.00286093 Jy ! Component: 1450 - total flux cleaned = 0.00291333 Jy ! Component: 1500 - total flux cleaned = 0.0029648 Jy ! Component: 1550 - total flux cleaned = 0.00299875 Jy ! Component: 1600 - total flux cleaned = 0.00304904 Jy ! Component: 1650 - total flux cleaned = 0.00306579 Jy ! Component: 1700 - total flux cleaned = 0.00311471 Jy ! Component: 1750 - total flux cleaned = 0.0031308 Jy ! Component: 1800 - total flux cleaned = 0.00316277 Jy ! Component: 1850 - total flux cleaned = 0.00322585 Jy ! Component: 1900 - total flux cleaned = 0.00324143 Jy ! Component: 1950 - total flux cleaned = 0.00322597 Jy ! Component: 2000 - total flux cleaned = 0.00324129 Jy ! Component: 2050 - total flux cleaned = 0.00324135 Jy ! Component: 2100 - total flux cleaned = 0.00321127 Jy ! Component: 2150 - total flux cleaned = 0.00322623 Jy ! Component: 2200 - total flux cleaned = 0.0031819 Jy ! Component: 2250 - total flux cleaned = 0.00316742 Jy ! Component: 2300 - total flux cleaned = 0.0031529 Jy ! Component: 2350 - total flux cleaned = 0.00312408 Jy ! Component: 2400 - total flux cleaned = 0.00308117 Jy ! Component: 2450 - total flux cleaned = 0.00306692 Jy ! Component: 2500 - total flux cleaned = 0.00302461 Jy ! Component: 2550 - total flux cleaned = 0.00301054 Jy ! Component: 2600 - total flux cleaned = 0.00296883 Jy ! Component: 2650 - total flux cleaned = 0.00294131 Jy ! Component: 2700 - total flux cleaned = 0.00292757 Jy ! Component: 2750 - total flux cleaned = 0.0029138 Jy ! Component: 2800 - total flux cleaned = 0.00290023 Jy ! Component: 2850 - total flux cleaned = 0.00287322 Jy ! Component: 2900 - total flux cleaned = 0.00287322 Jy ! Component: 2950 - total flux cleaned = 0.00283298 Jy ! Component: 3000 - total flux cleaned = 0.00279299 Jy ! Component: 3050 - total flux cleaned = 0.00272655 Jy ! Component: 3100 - total flux cleaned = 0.00264722 Jy ! Component: 3150 - total flux cleaned = 0.00258145 Jy ! Component: 3200 - total flux cleaned = 0.00254216 Jy ! Component: 3250 - total flux cleaned = 0.00248989 Jy ! Component: 3300 - total flux cleaned = 0.00242471 Jy ! Component: 3350 - total flux cleaned = 0.0023987 Jy ! Component: 3400 - total flux cleaned = 0.00230812 Jy ! Component: 3450 - total flux cleaned = 0.00228237 Jy ! Component: 3500 - total flux cleaned = 0.00223095 Jy ! Component: 3550 - total flux cleaned = 0.00212826 Jy ! Component: 3600 - total flux cleaned = 0.00206436 Jy ! Component: 3650 - total flux cleaned = 0.00200062 Jy ! Component: 3700 - total flux cleaned = 0.001937 Jy ! Component: 3750 - total flux cleaned = 0.00186087 Jy ! Component: 3800 - total flux cleaned = 0.00178482 Jy ! Component: 3850 - total flux cleaned = 0.00172156 Jy ! Component: 3900 - total flux cleaned = 0.00165833 Jy ! Component: 3950 - total flux cleaned = 0.00160782 Jy ! Component: 4000 - total flux cleaned = 0.0015322 Jy ! Component: 4050 - total flux cleaned = 0.00146923 Jy ! Total flux subtracted in 4096 components = 0.00139365 Jy ! Clean residual min=-0.000754 max=0.000959 Jy/beam ! Clean residual mean=-0.000001 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.0482684 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 291 components and 0.0482684 Jy ![Exited script file: muppet] wmap "J0110-1648_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.73 x 13.68 at 9.512 degrees (North through East) ! Clean map min=-0.0061363 max=0.062005 Jy/beam ! Writing clean map to FITS file: J0110-1648_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0620048 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000242313 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17239 1.17239 2.34478 4.68956 9.37913 18.7583 37.5165 75.033 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.73 x 13.68 at 9.512 degrees (North through East) ! Clean map min=-0.0061363 max=0.062005 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0110-1648_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:14:29 2019