! Started logfile: J0110+5632_S_2017_05_27_pus_uvs.log on Fri May 3 10:53:53 2019 obs J0110+5632_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0110+5632_S_2017_05_27_pus_uva.fits ! AN table 1: 217 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98341 visibilities/baseline/integration-bin. ! Found source: J0110+5632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 38412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0110+5632_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1108 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931739Jy sigma=0.008294 ! Fit after self-cal, rms=0.912141Jy sigma=0.008129 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=4.091 mas, bpa=-7.385 degrees ! Estimated noise=862.511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637258 Jy ! Component: 100 - total flux cleaned = 0.0907664 Jy ! Total flux subtracted in 100 components = 0.0907664 Jy ! Clean residual min=-0.011084 max=0.016175 Jy/beam ! Clean residual mean=0.000018 rms=0.003322 Jy/beam ! Combined flux in latest and established models = 0.0907664 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0907664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131586Jy sigma=0.001202 ! Fit after self-cal, rms=0.131469Jy sigma=0.001201 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=5.008 mas, bpa=-3.784 degrees ! Estimated noise=456.268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310265 Jy ! Component: 100 - total flux cleaned = 0.0485888 Jy ! Component: 150 - total flux cleaned = 0.0592466 Jy ! Component: 200 - total flux cleaned = 0.065813 Jy ! Total flux subtracted in 200 components = 0.065813 Jy ! Clean residual min=-0.017056 max=0.028741 Jy/beam ! Clean residual mean=0.000005 rms=0.006301 Jy/beam ! Combined flux in latest and established models = 0.156579 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 68 components and 0.156579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124529Jy sigma=0.001129 ! Fit after self-cal, rms=0.124453Jy sigma=0.001128 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.44 HN 1.27 KP 1.54 ! LA 0.58 MK 1.63 NL 1.39 OV 1.53 ! PT 0.60 SC 1.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.45 HN 1.24 KP 1.43 ! LA 0.58 MK 1.32 NL 1.43 OV 1.48 ! PT 0.64 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.46 HN 1.25 KP 1.43 ! LA 0.61 MK 1.20 NL 1.40 OV 1.42 ! PT 0.66 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.94 HN 1.86 KP 1.00* ! LA 0.48 MK 1.17 NL 1.00* OV 1.00* ! PT 0.73 SC 1.00* ! ! ! Fit before self-cal, rms=0.124453Jy sigma=0.001128 ! Fit after self-cal, rms=0.153592Jy sigma=0.001019 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.068 mas, bmaj=5.379 mas, bpa=-0.8661 degrees ! Estimated noise=516.383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513929 Jy ! Component: 100 - total flux cleaned = 0.00421948 Jy ! Component: 150 - total flux cleaned = 0.0040934 Jy ! Component: 200 - total flux cleaned = 0.00377547 Jy ! Total flux subtracted in 200 components = 0.00377547 Jy ! Clean residual min=-0.017202 max=0.027322 Jy/beam ! Clean residual mean=0.000002 rms=0.005852 Jy/beam ! Combined flux in latest and established models = 0.160355 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 71 components and 0.160355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152354Jy sigma=0.001021 ! Fit after self-cal, rms=0.159840Jy sigma=0.000995 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159840Jy sigma=0.000995 ! Fit after self-cal, rms=0.429033Jy sigma=0.000890 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.986 mas, bmaj=5.802 mas, bpa=-0.7227 degrees ! Estimated noise=582.703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00806368 Jy ! Component: 100 - total flux cleaned = 0.00779902 Jy ! Component: 150 - total flux cleaned = 0.00745502 Jy ! Component: 200 - total flux cleaned = 0.00716234 Jy ! Total flux subtracted in 200 components = 0.00716234 Jy ! Clean residual min=-0.012866 max=0.021884 Jy/beam ! Clean residual mean=0.000004 rms=0.004507 Jy/beam ! Combined flux in latest and established models = 0.167517 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.167517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.427692Jy sigma=0.000895 ! Fit after self-cal, rms=0.433944Jy sigma=0.000891 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215484 Jy ! Component: 100 - total flux cleaned = 0.0287122 Jy ! Component: 150 - total flux cleaned = 0.0297963 Jy ! Component: 200 - total flux cleaned = 0.0300364 Jy ! Total flux subtracted in 200 components = 0.0300364 Jy ! Clean residual min=-0.012434 max=0.019495 Jy/beam ! Clean residual mean=0.000105 rms=0.004088 Jy/beam ! Combined flux in latest and established models = 0.197554 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 108 components and 0.197554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431470Jy sigma=0.000869 ! Fit after self-cal, rms=0.432616Jy sigma=0.000861 ! Inverting map ! Added new window around map position (85, -66.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205767 Jy ! Component: 100 - total flux cleaned = 0.0309748 Jy ! Component: 150 - total flux cleaned = 0.0374944 Jy ! Component: 200 - total flux cleaned = 0.039317 Jy ! Total flux subtracted in 200 components = 0.039317 Jy ! Clean residual min=-0.011496 max=0.017601 Jy/beam ! Clean residual mean=0.000029 rms=0.003815 Jy/beam ! Combined flux in latest and established models = 0.236871 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 159 components and 0.236871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428907Jy sigma=0.000845 ! Fit after self-cal, rms=0.429591Jy sigma=0.000841 ! Inverting map ! Added new window around map position (91, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162279 Jy ! Component: 100 - total flux cleaned = 0.0252269 Jy ! Component: 150 - total flux cleaned = 0.0304717 Jy ! Component: 200 - total flux cleaned = 0.0335164 Jy ! Total flux subtracted in 200 components = 0.0335164 Jy ! Clean residual min=-0.011652 max=0.018957 Jy/beam ! Clean residual mean=-0.000162 rms=0.003869 Jy/beam ! Combined flux in latest and established models = 0.270387 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 214 components and 0.270387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.426203Jy sigma=0.000839 ! Fit after self-cal, rms=0.425902Jy sigma=0.000835 ! Inverting map ! Added new window around map position (-0.5, 56.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146312 Jy ! Component: 100 - total flux cleaned = 0.0210153 Jy ! Component: 150 - total flux cleaned = 0.0259275 Jy ! Component: 200 - total flux cleaned = 0.0296373 Jy ! Total flux subtracted in 200 components = 0.0296373 Jy ! Clean residual min=-0.011692 max=0.018132 Jy/beam ! Clean residual mean=-0.000009 rms=0.003683 Jy/beam ! Combined flux in latest and established models = 0.300024 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 253 components and 0.300024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.422230Jy sigma=0.000824 ! Fit after self-cal, rms=0.424381Jy sigma=0.000819 ! Inverting map ! Added new window around map position (38, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154417 Jy ! Component: 100 - total flux cleaned = 0.0227518 Jy ! Component: 150 - total flux cleaned = 0.028351 Jy ! Component: 200 - total flux cleaned = 0.0319638 Jy ! Total flux subtracted in 200 components = 0.0319638 Jy ! Clean residual min=-0.012588 max=0.014751 Jy/beam ! Clean residual mean=-0.000055 rms=0.003507 Jy/beam ! Combined flux in latest and established models = 0.331988 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 289 components and 0.331988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.420649Jy sigma=0.000812 ! Fit after self-cal, rms=0.420099Jy sigma=0.000807 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.420099Jy sigma=0.000807 ! Fit after self-cal, rms=0.360766Jy sigma=0.000788 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=5.713 mas, bpa=1.146 degrees ! Estimated noise=583.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108824 Jy ! Component: 100 - total flux cleaned = 0.0165344 Jy ! Component: 150 - total flux cleaned = 0.0191552 Jy ! Component: 200 - total flux cleaned = 0.0208539 Jy ! Total flux subtracted in 200 components = 0.0208539 Jy ! Clean residual min=-0.010667 max=0.012963 Jy/beam ! Clean residual mean=-0.000067 rms=0.003117 Jy/beam ! Combined flux in latest and established models = 0.352842 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 314 components and 0.352842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358431Jy sigma=0.000785 ! Fit after self-cal, rms=0.357899Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394187 Jy ! Component: 100 - total flux cleaned = 0.00514723 Jy ! Component: 150 - total flux cleaned = 0.00626999 Jy ! Component: 200 - total flux cleaned = 0.00753717 Jy ! Total flux subtracted in 200 components = 0.00753717 Jy ! Clean residual min=-0.010611 max=0.013511 Jy/beam ! Clean residual mean=-0.000072 rms=0.003119 Jy/beam ! Combined flux in latest and established models = 0.360379 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 332 components and 0.360379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356332Jy sigma=0.000782 ! Fit after self-cal, rms=0.356302Jy sigma=0.000782 ! Inverting map ! Added new window around map position (24.5, -43). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119469 Jy ! Component: 100 - total flux cleaned = 0.0183656 Jy ! Component: 150 - total flux cleaned = 0.0203345 Jy ! Component: 200 - total flux cleaned = 0.0224364 Jy ! Total flux subtracted in 200 components = 0.0224364 Jy ! Clean residual min=-0.010664 max=0.012522 Jy/beam ! Clean residual mean=-0.000020 rms=0.003054 Jy/beam ! Combined flux in latest and established models = 0.382815 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 368 components and 0.382815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354145Jy sigma=0.000778 ! Fit after self-cal, rms=0.353153Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353153Jy sigma=0.000776 ! Fit after self-cal, rms=0.313494Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.446 mas, bmaj=10.02 mas, bpa=-1.682 degrees ! Estimated noise=630.105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100646 Jy ! Component: 100 - total flux cleaned = 0.0133455 Jy ! Component: 150 - total flux cleaned = 0.0158582 Jy ! Component: 200 - total flux cleaned = 0.0180966 Jy ! Total flux subtracted in 200 components = 0.0180966 Jy ! Clean residual min=-0.015146 max=0.016026 Jy/beam ! Clean residual mean=-0.000089 rms=0.004443 Jy/beam ! Combined flux in latest and established models = 0.400912 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 394 components and 0.400912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311152Jy sigma=0.000773 ! Fit after self-cal, rms=0.310123Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524102 Jy ! Component: 100 - total flux cleaned = 0.0071831 Jy ! Component: 150 - total flux cleaned = 0.00841626 Jy ! Component: 200 - total flux cleaned = 0.0100206 Jy ! Total flux subtracted in 200 components = 0.0100206 Jy ! Clean residual min=-0.015165 max=0.015369 Jy/beam ! Clean residual mean=-0.000068 rms=0.004389 Jy/beam ! Combined flux in latest and established models = 0.410932 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 422 components and 0.410932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308623Jy sigma=0.000773 ! Fit after self-cal, rms=0.308174Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.08 mas, bmaj=5.695 mas, bpa=0.4429 degrees ! Estimated noise=592.266 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.08 x 5.695 at 0.4429 degrees (North through East) ! Clean map min=-0.015898 max=0.11068 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=4.54 mas, bpa=-1.902 degrees ! Estimated noise=1241.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0802396 Jy ! Component: 100 - total flux cleaned = 0.118728 Jy ! Component: 150 - total flux cleaned = 0.147792 Jy ! Component: 200 - total flux cleaned = 0.172534 Jy ! Total flux subtracted in 200 components = 0.172534 Jy ! Clean residual min=-0.015447 max=0.017931 Jy/beam ! Clean residual mean=0.000015 rms=0.004283 Jy/beam ! Combined flux in latest and established models = 0.172534 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.172534 Jy ! Inverting map and beam ! Estimated beam: bmin=4.08 mas, bmaj=5.695 mas, bpa=0.4429 degrees ! Estimated noise=592.266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281707 Jy ! Component: 100 - total flux cleaned = 0.0511328 Jy ! Component: 150 - total flux cleaned = 0.0711381 Jy ! Component: 200 - total flux cleaned = 0.0875745 Jy ! Total flux subtracted in 200 components = 0.0875745 Jy ! Clean residual min=-0.016031 max=0.016885 Jy/beam ! Clean residual mean=-0.000021 rms=0.004177 Jy/beam ! Combined flux in latest and established models = 0.260109 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 113 components and 0.260109 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.446 mas, bmaj=10.02 mas, bpa=-1.682 degrees ! Estimated noise=630.105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250632 Jy ! Component: 100 - total flux cleaned = 0.0451708 Jy ! Component: 150 - total flux cleaned = 0.0597338 Jy ! Component: 200 - total flux cleaned = 0.0732331 Jy ! Total flux subtracted in 200 components = 0.0732331 Jy ! Clean residual min=-0.017539 max=0.019945 Jy/beam ! Clean residual mean=-0.000081 rms=0.005198 Jy/beam ! Combined flux in latest and established models = 0.333342 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108995 Jy ! Component: 100 - total flux cleaned = 0.0192185 Jy ! Component: 150 - total flux cleaned = 0.0268386 Jy ! Component: 200 - total flux cleaned = 0.0338594 Jy ! Total flux subtracted in 200 components = 0.0338594 Jy ! Clean residual min=-0.016684 max=0.016597 Jy/beam ! Clean residual mean=-0.000105 rms=0.004706 Jy/beam ! Combined flux in latest and established models = 0.367201 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 196 components and 0.367201 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.08 mas, bmaj=5.695 mas, bpa=0.4429 degrees ! Estimated noise=592.266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00891539 Jy ! Component: 100 - total flux cleaned = 0.0149423 Jy ! Component: 150 - total flux cleaned = 0.0191878 Jy ! Component: 200 - total flux cleaned = 0.0234733 Jy ! Total flux subtracted in 200 components = 0.0234733 Jy ! Clean residual min=-0.012627 max=0.012331 Jy/beam ! Clean residual mean=-0.000033 rms=0.003190 Jy/beam ! Combined flux in latest and established models = 0.390674 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 236 components and 0.390674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310555Jy sigma=0.000784 ! Fit after self-cal, rms=0.310129Jy sigma=0.000780 wmodel J0110+5632_S_2017_05_27_pus_map.mod ! Writing 236 model components to file: J0110+5632_S_2017_05_27_pus_map.mod wobs J0110+5632_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0110+5632_S_2017_05_27_pus_uvs.fits wwins J0110+5632_S_2017_05_27_pus_map.win ! wwins: Wrote 7 windows to J0110+5632_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264402 Jy ! Component: 100 - total flux cleaned = 0.00468045 Jy ! Component: 150 - total flux cleaned = 0.00604582 Jy ! Component: 200 - total flux cleaned = 0.00810848 Jy ! Component: 250 - total flux cleaned = 0.00974441 Jy ! Component: 300 - total flux cleaned = 0.0115188 Jy ! Component: 350 - total flux cleaned = 0.0132496 Jy ! Component: 400 - total flux cleaned = 0.014941 Jy ! Component: 450 - total flux cleaned = 0.0164329 Jy ! Component: 500 - total flux cleaned = 0.0174069 Jy ! Component: 550 - total flux cleaned = 0.0185221 Jy ! Component: 600 - total flux cleaned = 0.0191535 Jy ! Component: 650 - total flux cleaned = 0.020237 Jy ! Component: 700 - total flux cleaned = 0.021303 Jy ! Component: 750 - total flux cleaned = 0.0223507 Jy ! Component: 800 - total flux cleaned = 0.0233824 Jy ! Component: 850 - total flux cleaned = 0.0241076 Jy ! Component: 900 - total flux cleaned = 0.0249687 Jy ! Component: 950 - total flux cleaned = 0.0252543 Jy ! Component: 1000 - total flux cleaned = 0.0263755 Jy ! Component: 1050 - total flux cleaned = 0.0270666 Jy ! Component: 1100 - total flux cleaned = 0.0276134 Jy ! Component: 1150 - total flux cleaned = 0.0285601 Jy ! Component: 1200 - total flux cleaned = 0.0288293 Jy ! Component: 1250 - total flux cleaned = 0.0298875 Jy ! Component: 1300 - total flux cleaned = 0.0304101 Jy ! Component: 1350 - total flux cleaned = 0.0307994 Jy ! Component: 1400 - total flux cleaned = 0.0318236 Jy ! Component: 1450 - total flux cleaned = 0.0324573 Jy ! Component: 1500 - total flux cleaned = 0.0329608 Jy ! Component: 1550 - total flux cleaned = 0.0337078 Jy ! Component: 1600 - total flux cleaned = 0.0344488 Jy ! Component: 1650 - total flux cleaned = 0.0353055 Jy ! Component: 1700 - total flux cleaned = 0.0357905 Jy ! Component: 1750 - total flux cleaned = 0.0367542 Jy ! Component: 1800 - total flux cleaned = 0.0375888 Jy ! Component: 1850 - total flux cleaned = 0.0381815 Jy ! Component: 1900 - total flux cleaned = 0.0390028 Jy ! Component: 1950 - total flux cleaned = 0.0394703 Jy ! Component: 2000 - total flux cleaned = 0.0406292 Jy ! Component: 2050 - total flux cleaned = 0.0410891 Jy ! Component: 2100 - total flux cleaned = 0.0422309 Jy ! Component: 2150 - total flux cleaned = 0.0431372 Jy ! Component: 2200 - total flux cleaned = 0.0438121 Jy ! Component: 2250 - total flux cleaned = 0.0444829 Jy ! Component: 2300 - total flux cleaned = 0.0451502 Jy ! Component: 2350 - total flux cleaned = 0.0461433 Jy ! Component: 2400 - total flux cleaned = 0.0469107 Jy ! Component: 2450 - total flux cleaned = 0.0478905 Jy ! Component: 2500 - total flux cleaned = 0.0487562 Jy ! Component: 2550 - total flux cleaned = 0.0495106 Jy ! Component: 2600 - total flux cleaned = 0.050366 Jy ! Component: 2650 - total flux cleaned = 0.051322 Jy ! Component: 2700 - total flux cleaned = 0.0518508 Jy ! Component: 2750 - total flux cleaned = 0.0524817 Jy ! Component: 2800 - total flux cleaned = 0.0533176 Jy ! Component: 2850 - total flux cleaned = 0.0540448 Jy ! Component: 2900 - total flux cleaned = 0.054768 Jy ! Component: 2950 - total flux cleaned = 0.0556921 Jy ! Component: 3000 - total flux cleaned = 0.0561003 Jy ! Component: 3050 - total flux cleaned = 0.0569135 Jy ! Component: 3100 - total flux cleaned = 0.0574197 Jy ! Component: 3150 - total flux cleaned = 0.0580224 Jy ! Component: 3200 - total flux cleaned = 0.0589228 Jy ! Component: 3250 - total flux cleaned = 0.0598175 Jy ! Component: 3300 - total flux cleaned = 0.0605107 Jy ! Component: 3350 - total flux cleaned = 0.0612993 Jy ! Component: 3400 - total flux cleaned = 0.0617894 Jy ! Component: 3450 - total flux cleaned = 0.0624717 Jy ! Component: 3500 - total flux cleaned = 0.0632483 Jy ! Component: 3550 - total flux cleaned = 0.0643106 Jy ! Component: 3600 - total flux cleaned = 0.0650798 Jy ! Component: 3650 - total flux cleaned = 0.0655575 Jy ! Component: 3700 - total flux cleaned = 0.0662245 Jy ! Component: 3750 - total flux cleaned = 0.0673618 Jy ! Component: 3800 - total flux cleaned = 0.0681163 Jy ! Component: 3850 - total flux cleaned = 0.0688681 Jy ! Component: 3900 - total flux cleaned = 0.0694295 Jy ! Component: 3950 - total flux cleaned = 0.070453 Jy ! Component: 4000 - total flux cleaned = 0.0709158 Jy ! Component: 4050 - total flux cleaned = 0.0721153 Jy ! Total flux subtracted in 4096 components = 0.0729422 Jy ! Clean residual min=-0.004588 max=0.005200 Jy/beam ! Clean residual mean=-0.000013 rms=0.001884 Jy/beam ! Combined flux in latest and established models = 0.463617 Jy keep ! Adding 441 model components to the UV plane model. ! The established model now contains 676 components and 0.463617 Jy ![Exited script file: muppet] wmap "J0110+5632_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.08 x 5.695 at 0.4429 degrees (North through East) ! Clean map min=-0.010907 max=0.11161 Jy/beam ! Writing clean map to FITS file: J0110+5632_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111611 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00187825 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.04857 5.04857 10.0971 20.1943 40.3886 80.7772 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0056 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.08 x 5.695 at 0.4429 degrees (North through East) ! Clean map min=-0.010907 max=0.11161 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0110+5632_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:54:00 2019