! Started logfile: J0109+6133_S_2017_04_28_pus_uvs.log on Thu May 2 16:14:18 2019 obs J0109+6133_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0109+6133_S_2017_04_28_pus_uva.fits ! AN table 1: 191 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.76975 visibilities/baseline/integration-bin. ! Found source: J0109+6133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 26464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0109+6133_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 925 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.738464Jy sigma=0.011902 ! Fit after self-cal, rms=0.734060Jy sigma=0.011831 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=3.862 mas, bpa=-34.45 degrees ! Estimated noise=906.404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175495 Jy ! Component: 100 - total flux cleaned = 0.225344 Jy ! Total flux subtracted in 100 components = 0.225344 Jy ! Clean residual min=-0.022994 max=0.031167 Jy/beam ! Clean residual mean=-0.000065 rms=0.007643 Jy/beam ! Combined flux in latest and established models = 0.225344 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.225344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148373Jy sigma=0.002384 ! Fit after self-cal, rms=0.150204Jy sigma=0.002381 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.235 mas, bmaj=4.68 mas, bpa=-39.07 degrees ! Estimated noise=530.908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.035352 Jy ! Component: 100 - total flux cleaned = 0.0509968 Jy ! Component: 150 - total flux cleaned = 0.057791 Jy ! Component: 200 - total flux cleaned = 0.0588109 Jy ! Total flux subtracted in 200 components = 0.0588109 Jy ! Clean residual min=-0.023779 max=0.032418 Jy/beam ! Clean residual mean=-0.000024 rms=0.008042 Jy/beam ! Combined flux in latest and established models = 0.284155 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.284155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134665Jy sigma=0.002625 ! Fit after self-cal, rms=0.134429Jy sigma=0.002625 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 15.16 FD 0.96 HN 0.94 KP 0.91 ! LA 1.00 MK 1.04 NL 0.90 OV 0.95 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.86 HN 0.95 KP 0.85 ! LA 0.92 MK 0.98 NL 1.02 OV 0.93 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.89 HN 0.93 KP 0.89 ! LA 0.94 MK 1.00 NL 0.95 OV 0.86 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 4. ! A total of 144 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 0.92 KP 1.00* ! LA 0.92 MK 0.96 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.134429Jy sigma=0.002625 ! Fit after self-cal, rms=0.923920Jy sigma=0.000970 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.19 mas, bmaj=4.562 mas, bpa=-26.59 degrees ! Estimated noise=556.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106492 Jy ! Component: 100 - total flux cleaned = 0.0111248 Jy ! Component: 150 - total flux cleaned = 0.0111148 Jy ! Component: 200 - total flux cleaned = 0.0109808 Jy ! Total flux subtracted in 200 components = 0.0109808 Jy ! Clean residual min=-0.008980 max=0.006885 Jy/beam ! Clean residual mean=0.000068 rms=0.002083 Jy/beam ! Combined flux in latest and established models = 0.295136 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.295136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.922017Jy sigma=0.000968 ! Fit after self-cal, rms=0.921431Jy sigma=0.000912 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.921431Jy sigma=0.000912 ! Fit after self-cal, rms=0.429713Jy sigma=0.000740 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.14 mas, bmaj=4.557 mas, bpa=-31.18 degrees ! Estimated noise=546.678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000745139 Jy ! Component: 100 - total flux cleaned = 0.00108842 Jy ! Component: 150 - total flux cleaned = 0.00114183 Jy ! Component: 200 - total flux cleaned = 0.00114521 Jy ! Total flux subtracted in 200 components = 0.00114521 Jy ! Clean residual min=-0.002314 max=0.004330 Jy/beam ! Clean residual mean=0.000018 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.296281 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.296281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429665Jy sigma=0.000739 ! Fit after self-cal, rms=0.429825Jy sigma=0.000738 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361894 Jy ! Component: 100 - total flux cleaned = 0.0036048 Jy ! Component: 150 - total flux cleaned = 0.00334443 Jy ! Component: 200 - total flux cleaned = 0.00316632 Jy ! Total flux subtracted in 200 components = 0.00316632 Jy ! Clean residual min=-0.002318 max=0.002237 Jy/beam ! Clean residual mean=0.000022 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.299448 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.299448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429806Jy sigma=0.000737 ! Fit after self-cal, rms=0.429796Jy sigma=0.000737 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429796Jy sigma=0.000737 ! Fit after self-cal, rms=0.441158Jy sigma=0.000736 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.139 mas, bmaj=4.535 mas, bpa=-30.48 degrees ! Estimated noise=548.156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221887 Jy ! Component: 100 - total flux cleaned = 0.00273007 Jy ! Component: 150 - total flux cleaned = 0.00297279 Jy ! Component: 200 - total flux cleaned = 0.00315425 Jy ! Total flux subtracted in 200 components = 0.00315425 Jy ! Clean residual min=-0.002201 max=0.002131 Jy/beam ! Clean residual mean=0.000021 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.302602 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.302602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441135Jy sigma=0.000736 ! Fit after self-cal, rms=0.441133Jy sigma=0.000736 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041503 Jy ! Component: 100 - total flux cleaned = 0.000479351 Jy ! Component: 150 - total flux cleaned = 0.000538413 Jy ! Component: 200 - total flux cleaned = 0.000567555 Jy ! Total flux subtracted in 200 components = 0.000567555 Jy ! Clean residual min=-0.002149 max=0.002107 Jy/beam ! Clean residual mean=0.000021 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.303169 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.303169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441126Jy sigma=0.000735 ! Fit after self-cal, rms=0.441124Jy sigma=0.000735 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441124Jy sigma=0.000735 ! Fit after self-cal, rms=0.439779Jy sigma=0.000735 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.314 mas, bmaj=9.186 mas, bpa=67.95 degrees ! Estimated noise=693.347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163983 Jy ! Component: 100 - total flux cleaned = 0.00243001 Jy ! Component: 150 - total flux cleaned = 0.00273933 Jy ! Component: 200 - total flux cleaned = 0.00283062 Jy ! Total flux subtracted in 200 components = 0.00283062 Jy ! Clean residual min=-0.003176 max=0.002504 Jy/beam ! Clean residual mean=0.000047 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.306 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 90 components and 0.306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439772Jy sigma=0.000735 ! Fit after self-cal, rms=0.439768Jy sigma=0.000735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345478 Jy ! Component: 100 - total flux cleaned = 0.000374979 Jy ! Component: 150 - total flux cleaned = 0.000387294 Jy ! Component: 200 - total flux cleaned = 0.000387039 Jy ! Total flux subtracted in 200 components = 0.000387039 Jy ! Clean residual min=-0.003140 max=0.002503 Jy/beam ! Clean residual mean=0.000047 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.306387 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.306387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439770Jy sigma=0.000735 ! Fit after self-cal, rms=0.439769Jy sigma=0.000735 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.137 mas, bmaj=4.518 mas, bpa=-30.37 degrees ! Estimated noise=549.145 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.137 x 4.518 at -30.37 degrees (North through East) ! Clean map min=-0.0020288 max=0.24388 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=3.694 mas, bpa=-32.4 degrees ! Estimated noise=941.102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184432 Jy ! Component: 100 - total flux cleaned = 0.241066 Jy ! Component: 150 - total flux cleaned = 0.264929 Jy ! Component: 200 - total flux cleaned = 0.277596 Jy ! Total flux subtracted in 200 components = 0.277596 Jy ! Clean residual min=-0.004289 max=0.006505 Jy/beam ! Clean residual mean=0.000000 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.277596 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.277596 Jy ! Inverting map and beam ! Estimated beam: bmin=4.137 mas, bmaj=4.518 mas, bpa=-30.37 degrees ! Estimated noise=549.145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011571 Jy ! Component: 100 - total flux cleaned = 0.0181557 Jy ! Component: 150 - total flux cleaned = 0.0220772 Jy ! Component: 200 - total flux cleaned = 0.0245102 Jy ! Total flux subtracted in 200 components = 0.0245102 Jy ! Clean residual min=-0.002160 max=0.002066 Jy/beam ! Clean residual mean=0.000021 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.302106 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 63 components and 0.302106 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.314 mas, bmaj=9.186 mas, bpa=67.95 degrees ! Estimated noise=693.347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235625 Jy ! Component: 100 - total flux cleaned = 0.00359103 Jy ! Component: 150 - total flux cleaned = 0.00413109 Jy ! Component: 200 - total flux cleaned = 0.00426126 Jy ! Total flux subtracted in 200 components = 0.00426126 Jy ! Clean residual min=-0.003088 max=0.002473 Jy/beam ! Clean residual mean=0.000047 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.306367 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.28851e-05 Jy ! Component: 100 - total flux cleaned = 8.35355e-05 Jy ! Component: 150 - total flux cleaned = 0.000110748 Jy ! Component: 200 - total flux cleaned = 0.000133882 Jy ! Total flux subtracted in 200 components = 0.000133882 Jy ! Clean residual min=-0.003079 max=0.002479 Jy/beam ! Clean residual mean=0.000047 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.306501 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 102 components and 0.306501 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.137 mas, bmaj=4.518 mas, bpa=-30.37 degrees ! Estimated noise=549.145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.85354e-05 Jy ! Component: 100 - total flux cleaned = 3.68071e-05 Jy ! Component: 150 - total flux cleaned = 7.93708e-05 Jy ! Component: 200 - total flux cleaned = 9.76775e-05 Jy ! Total flux subtracted in 200 components = 9.76775e-05 Jy ! Clean residual min=-0.002061 max=0.002058 Jy/beam ! Clean residual mean=0.000022 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.306599 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 115 components and 0.306599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439737Jy sigma=0.000735 ! Fit after self-cal, rms=0.439731Jy sigma=0.000735 wmodel J0109+6133_S_2017_04_28_pus_map.mod ! Writing 115 model components to file: J0109+6133_S_2017_04_28_pus_map.mod wobs J0109+6133_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0109+6133_S_2017_04_28_pus_uvs.fits wwins J0109+6133_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0109+6133_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.66174e-05 Jy ! Component: 100 - total flux cleaned = 0.00042198 Jy ! Component: 150 - total flux cleaned = 0.000759868 Jy ! Component: 200 - total flux cleaned = 0.000888429 Jy ! Component: 250 - total flux cleaned = 0.00095101 Jy ! Component: 300 - total flux cleaned = 0.00104209 Jy ! Component: 350 - total flux cleaned = 0.0011298 Jy ! Component: 400 - total flux cleaned = 0.00115842 Jy ! Component: 450 - total flux cleaned = 0.00118684 Jy ! Component: 500 - total flux cleaned = 0.00121502 Jy ! Component: 550 - total flux cleaned = 0.0013505 Jy ! Component: 600 - total flux cleaned = 0.00140369 Jy ! Component: 650 - total flux cleaned = 0.00150836 Jy ! Component: 700 - total flux cleaned = 0.0015598 Jy ! Component: 750 - total flux cleaned = 0.00166072 Jy ! Component: 800 - total flux cleaned = 0.00183362 Jy ! Component: 850 - total flux cleaned = 0.0019304 Jy ! Component: 900 - total flux cleaned = 0.00202614 Jy ! Component: 950 - total flux cleaned = 0.00209661 Jy ! Component: 1000 - total flux cleaned = 0.00218955 Jy ! Component: 1050 - total flux cleaned = 0.00228099 Jy ! Component: 1100 - total flux cleaned = 0.00239316 Jy ! Component: 1150 - total flux cleaned = 0.00243785 Jy ! Component: 1200 - total flux cleaned = 0.00259121 Jy ! Component: 1250 - total flux cleaned = 0.00265638 Jy ! Component: 1300 - total flux cleaned = 0.00272067 Jy ! Component: 1350 - total flux cleaned = 0.00282654 Jy ! Component: 1400 - total flux cleaned = 0.00288936 Jy ! Component: 1450 - total flux cleaned = 0.00299226 Jy ! Component: 1500 - total flux cleaned = 0.00305334 Jy ! Component: 1550 - total flux cleaned = 0.0031335 Jy ! Component: 1600 - total flux cleaned = 0.00311411 Jy ! Component: 1650 - total flux cleaned = 0.00331062 Jy ! Component: 1700 - total flux cleaned = 0.00340764 Jy ! Component: 1750 - total flux cleaned = 0.00338824 Jy ! Component: 1800 - total flux cleaned = 0.00350239 Jy ! Component: 1850 - total flux cleaned = 0.00352102 Jy ! Component: 1900 - total flux cleaned = 0.00346545 Jy ! Component: 1950 - total flux cleaned = 0.00357607 Jy ! Component: 2000 - total flux cleaned = 0.00361263 Jy ! Component: 2050 - total flux cleaned = 0.00368502 Jy ! Component: 2100 - total flux cleaned = 0.00368518 Jy ! Component: 2150 - total flux cleaned = 0.00372035 Jy ! Component: 2200 - total flux cleaned = 0.00370282 Jy ! Component: 2250 - total flux cleaned = 0.00365087 Jy ! Component: 2300 - total flux cleaned = 0.00373719 Jy ! Component: 2350 - total flux cleaned = 0.00375419 Jy ! Component: 2400 - total flux cleaned = 0.00373727 Jy ! Component: 2450 - total flux cleaned = 0.00375394 Jy ! Component: 2500 - total flux cleaned = 0.00370384 Jy ! Component: 2550 - total flux cleaned = 0.00368719 Jy ! Component: 2600 - total flux cleaned = 0.00370377 Jy ! Component: 2650 - total flux cleaned = 0.00368746 Jy ! Component: 2700 - total flux cleaned = 0.00373575 Jy ! Component: 2750 - total flux cleaned = 0.00368771 Jy ! Component: 2800 - total flux cleaned = 0.00378285 Jy ! Component: 2850 - total flux cleaned = 0.00375128 Jy ! Component: 2900 - total flux cleaned = 0.00370432 Jy ! Component: 2950 - total flux cleaned = 0.00373526 Jy ! Component: 3000 - total flux cleaned = 0.00371995 Jy ! Component: 3050 - total flux cleaned = 0.00364343 Jy ! Component: 3100 - total flux cleaned = 0.00367385 Jy ! Component: 3150 - total flux cleaned = 0.00370396 Jy ! Component: 3200 - total flux cleaned = 0.00365907 Jy ! Component: 3250 - total flux cleaned = 0.00364428 Jy ! Component: 3300 - total flux cleaned = 0.00365908 Jy ! Component: 3350 - total flux cleaned = 0.0037321 Jy ! Component: 3400 - total flux cleaned = 0.00364478 Jy ! Component: 3450 - total flux cleaned = 0.00368814 Jy ! Component: 3500 - total flux cleaned = 0.00373102 Jy ! Component: 3550 - total flux cleaned = 0.00371655 Jy ! Component: 3600 - total flux cleaned = 0.00371648 Jy ! Component: 3650 - total flux cleaned = 0.00375874 Jy ! Component: 3700 - total flux cleaned = 0.00378678 Jy ! Component: 3750 - total flux cleaned = 0.00378659 Jy ! Component: 3800 - total flux cleaned = 0.0038417 Jy ! Component: 3850 - total flux cleaned = 0.00384161 Jy ! Component: 3900 - total flux cleaned = 0.00392317 Jy ! Component: 3950 - total flux cleaned = 0.00389593 Jy ! Component: 4000 - total flux cleaned = 0.00388235 Jy ! Component: 4050 - total flux cleaned = 0.00386906 Jy ! Total flux subtracted in 4096 components = 0.00386916 Jy ! Clean residual min=-0.000917 max=0.000854 Jy/beam ! Clean residual mean=0.000005 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.310468 Jy keep ! Adding 338 model components to the UV plane model. ! The established model now contains 453 components and 0.310468 Jy ![Exited script file: muppet] wmap "J0109+6133_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.137 x 4.518 at -30.37 degrees (North through East) ! Clean map min=-0.0016506 max=0.24519 Jy/beam ! Writing clean map to FITS file: J0109+6133_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.245193 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000256708 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.314088 0.314088 0.628176 1.25635 2.51271 5.02541 10.0508 20.1016 40.2033 80.4066 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.245 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.137 x 4.518 at -30.37 degrees (North through East) ! Clean map min=-0.0016506 max=0.24519 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0109+6133_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:14:24 2019